Is it possible to assign get parameter Id to a field which having drop down

Hi ,
Is there any possibility to assign paramter id to a field which having dropdown ?

hiii
yes you can assign parameter id to a field which is having dropdown.assign it same way by using GET SET parameter ID.
regards
twinkal

Similar Messages

When bookmarking a page, I can't get the complete list of bookmark folders to dropdown in order to select any folder in which to bookmark page. What do you set to get whole list of folders in Bookmarks to drop down?

When bookmarking a page, I can't get the complete list of bookmark folders to drop down in order to select any folder in which to bookmark page. The 'Folder:' bar has 'Bookmarks Menu' showing. The arrow on the bar drops down 5 recent folders to which pages have been saved, but the pop down arrow to the right of the bar just opens to show the three categories and 'New Folder' button. What do you set to get whole list of folders in Bookmarks to drop down?

To all, embarrassingly enough, I have discovered that I didn't know how to expand the three categories including 'Bookmarks Menu' in the 'Bookmark This Page' pop up interface. It was expanded by default on the initial Firefox opening and first page bookmark attempt. Next use it only showed categories. I clicked and double clicked the 'Bookmarks Menu' line, but failed to see the small, shaded triangle used to expand/collapse list. If it appears collapsed, just tap triangle at left of line to see all folders. It seems to open the same way after I do it for first time. Sorry for the inconvenience, and thanks for all the attempts to help.

How do I get about:config and other about: addresses to drop down from URL bar?

How do I get about:config and other about: addresses to drop down from URL bar?
It's a pain having to retype them in full... not sure why there is no easier interface to them.

hello, you can bookmark the sites for faster access.
[[How to use bookmarks to save and organize your favorite websites]]

AppleScript how to use "get" for field information and drop-down boxes?

Hi all,
First post.
Looking to use the "get" function or similar for getting information in a list or from a drop-down box or a field.
Example, you open keychain, open the info. for a cert and want to read the currently selected trust setting for "When using this certificate" drop-down.
Or, you want to check the Common Name field under details.
How would I return these specific values?
Thank you,
-b

The exact question being asked here: http://forum.soft32.com/mac/select-table-row-ftopict101735.html
But, that doesn't work with the latest AppleScript.

When I share a link (URL) only Apple computers receive the link. Others such as PCs and Blackberries get the message, but the field which should have the link is blank. Is this normal? Why can I only send to Apple machines?

when I "share a link" (URL) using the pulldown menu in Safari, the email goes to all addresses I indicate, but only Apple computers receive the link. Others such as PCs and Blackberries get the message, but the field which should have the link is blank. Is this normal? Why can I only send to Apple machines?

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

It is possible to assign value range to non key fields in the table?

Hi,
I want to give some range of values to the fields which are non key fields in the table.
is it possible?
can anybody tell me the procedure.
Thanks in Advance,
venkat

HI,
It is higjly possible in case of Z-table. but in standard table you can't make any modification.
You assign the value range to the domain of field.
go to SE11 and open the database table.
Select the Data Element of the fieldto which you want assign the range.
Click on its domain .
click on Value Range tab.
Set the range.
Regards,
anirban

Is there a way to get ACR to appear in the "Open With" drop down menu?

Hi,
Is there a way to get Adobe Camera Raw to appear directly along with CS3 in the Mac's ( OS 10.4.11) "Open With" drop down menu?

If you installed ACR it in the right place, and are targeting the kind of file that ACR can handle, it should be there.
I have found that there are certain Tiff Scans that won't open in ACR but if you just Duplicate them in Bridge, and then target the Duplicate, they will then open in ACR.
At least they do so for me.

Is there a way to get a "Send Page " option under the File drop down?

There is an option under the "File" drop down to "Send Link" is there a way to add a "Send Page" option?

Click-hold the unified Back / Forward button, or right-click it to get the Back / Forward history for that tab.
Or install this extension to get the old "drop-marker" button restored. <br />
https://addons.mozilla.org/en-US/firefox/addon/backforedrop/

How do I get out of "full screen" view. When I put my crusor at the top of the screen I get SOME menus showing, but nothe the "firefox" drop-down where I selected full screed (I was just trying to zoom out, actually)

I think the question pretty well summed it up. I selected full screen mode from the "firefox" drop-down box at the top left, but once in full screen mode, the drop-down box is not available. How do I get back to the standard view??

Press the F11 key to toggle into and out of full screen mode.
Or, move the mouse pointer to the top of the screen and right-click the "+" (new tab) button, or in a blank area of the tab bar, or in a blank area after the address box, and exit full screen mode from the context menu.

I can not get rid of a iCloud address in my drop-down from mail window

Email address wrong in mail on drop-down from window. The email was created as an alias in icloud but one leter is a mistake. I corrected this mistake with new address but can not get rid of old address and its not in icloud mail either.
Can you help.
End of tether
Morgan

morgan d falcon wrote:
drop-down from window
Sorry, I misunderstood. Apple calls it "the From pop-up menu" — see under Set the From address in this Apple doc:
Mail (Mavericks): Address messages
...Presumably if follow the instructions there and set "Send new messages from" to the address you want, you won't then need to click on the "From pop-up menu" and see the incorrect address.
Perhaps someone else here knows how to remove the incorrect address completely — or try clicking on "Manage your Apple ID" here:
My Apple ID

How to use SPMetal to get the item's original field which named 'Created'

I want to read the field which named 'Created' by using SPMetal,I found the 'Item' class has the property named '_originalValues', it seems to get the infomation about the original values.
Is there anyone who has solved this kind of problems?

Hi,
By default, the Created, CreatedBy, Modified and ModifiedBy fields are not created by SPMetal, so we will need to extend our base entity class for accessing these fields in our
code.
Here is a link will show how to achieve this with steps in detail:
http://weblogs.asp.net/uruit/archive/2011/05/05/linq-to-sharepoint-working-with-created-createdby-modified-and-modifiedby.aspx
Best regards
Patrick Liang
TechNet Community Support

How to set parameter id for a field, which is in disable mode ?

Hi,
I Have to set parameter id for field ledger for transaction FAGLB03, which is in disable mode, i have to set it through program,please let me know how to set it.
Thanks.

Say i have 5 rows then
for(int i=1;i<=5;i++){
String Newpath = updatepath(eval("{{obj.libraryname.web_input_text_fieldname}}"),i)
web.text_area(Newpath).setText("Text to be set")
Below function is used to update my path
public String updatepath(String path,int i) throws exception {
String FPath = "";
if(i<2) {
FPath = path.substring(0, path.indexOf("'", path.lastIndexOf("@id=")+5))+path.substring(path.indexOf("'", path.lastIndexOf("@id=")+5));
} else {
FPath = path.substring(0, path.indexOf("'", path.lastIndexOf("@id=")+5))+(i-1)+path.substring(path.indexOf("'", path.lastIndexOf("@id=")+5));
return Fpath
anyother way to update path and set the fields in mutiple block is appreciable
thanks
Suresh

Is it possible to retrieve a backup that is not available on the drop-down bar in iTunes "restore from backup"?

I was attempting to sync my phone so that I could get all of my pictures on the computer to free up some space on my phone. I have done this several times before with no problems. An error message popped up informing me that I needed to update my phone before I could sync my info. During the update, an error occured again so I tried to eject the device so that I could worry about it another day. After ejecting the phone, it kept showing on the display that it was still connected to itunes. I couldnt turn the phone off or anything, it was just frozen there. So, I hooked it back up to the computer and it prompted me to do an update on itunes to fix the problem. After updating itunes it said that i should restore the phone to it's original settings and then restore from backup. It performed a backup when I initially plugged the phone in the first time. After deleting everything off of my phone, I then attempted to restore from backup but got an error message saying that there was not enough free space on my device for me to restore my info...but I had just taken it off the phone. I stepped away from the computer for a moment and when I got back, it had performed another backup of my basically blank device. Now the only backups that I can pull up on itunes are from after everything was deleted from my phone. All of my information is gone. I know this doesn't really make any sense, but I have no idea how else to word it or how to fix it. PLEASE help! I have several pictures of my newborn son and pictures and videos of my husband's recovery process from a severe brain injury.

Under the PLAN screen, right click on the page you want to exclude from your menu list, navigate to Menu Options, and select Exclude Page From Menus.

Get multiline value field in a drop down c#

Hi guys ,
i want to get the value of a multiline field in a SharePoint list in a Dropdown control. Every line of the multiline filed will be a choice in the dropdown control. How can i do this?This is the way to get the value:
SPSite site = new SPSite(SPContext.Current.Web.Url); // Contestualizzazione in qualsiasi sito.
SPWeb web1 = site.OpenWeb();
SPList list1 = web1.Lists.TryGetList("Licenses");
SPListItemCollection items1 = list1.GetItems(new SPQuery()
Query = @"<Where><IsNotNull><FieldRef Name='Serial' /></IsNotNull></Where>"
foreach (SPListItem item in items1)
string DropDpwnValue = item["Serial"].ToString();
LicenseSerials.Items.Add(DropDpwnValue);

Ok this my solution:
SPSite site = new SPSite(SPContext.Current.Web.Url); // Contestualizzazione in qualsiasi sito.
SPWeb web1 = site.OpenWeb();
SPList list1 = web1.Lists.TryGetList("Licenses");
SPListItemCollection items1 = list1.GetItems(new SPQuery()
Query = @"<Where><IsNotNull><FieldRef Name='Serial' /></IsNotNull></Where>"
foreach (SPListItem item in items1)
string DropDpwnValue = item["Serial"].ToString();
string[] licensesChoice = DropDpwnValue.Split(';');
foreach (string word in licensesChoice)
LicenseSerials.Items.Add(word);
Bye

I'm getting adds on my facebook page from coupon drop down. I'm using Safari atm and just wondering how to get rid of them? I've been into extentions and removed all of them but the adds are still present! Any help would be greatful.

Does anyone know how I remove the pop ups as the pop up blocker is on and i've removed all extentions.

Download and install GlimmerBlocker:
http://glimmerblocker.en.softonic.com/mac

Is it possible to assign get parameter Id to a field which having drop down

Similar Messages

Maybe you are looking for