IS IT POSSIBLE TO AUTOMATE AN APPEGGIATED TRACK??

IT DOES SEEM TO BE, IVE TRIED USING THE TOUCH LATCH , HAS NO EFFECT, IS THIS POSSIBLE AT ALL? THANK YOU ALL WITH ANY INPUT OR SUGGESTIONS.

I tried to build screensets like you suggested. If I could
get this to work, I think it would be a great solution, but
I'm having serious problems.
I opened a separate mixer, with just the single vocal/audio
track showing.
Then I opened the main mixer, which has all the faders.
If I record-enable a midi track, and then hit the record-enable button on the audio track, the midi track becomes un-enabled. Incredibly frustrating.
The only way I've been able to do it has been to record-enable the vocal track, and then start recording.
Only if Logic is actually recording, can i then record-enable the midi track without deactivating the audio
track.
A big problem is, that when i click to record enable the
vocal track, the arrange window jumps all the way up to the
top, where the audio track is. THen i'm forced to travel
down, to re-find the midi track.
You mentioned in your post that the mixer needs to be
"unlinked". HOw is this done? Will it be possible for
me to click on the record-enable button on the mixer's audio track without the arrange window jumping to that track?

Similar Messages

Is it possible to individually export multiple tracks in sequence?

I have a very large number of tracks and I wish to automatically export each track individually. Currently, I need to deactivate every video track and then queue up each video one by one, needless to say, this process is very time consuming.
-Adam

I wish to automatically export each track individually.
Not possible.
I need to deactivate every video track and then queue up each video one by one.
That's your only option.
You can file a feature request here:
http://www.adobe.com/go/wish
note:
You can save a bit of time by holding down Shift
to disable / enable view of all video tracks at once.

In GB, I need to insert an audio track. When I try, it obliterates part of the adjacent bridge (track). How can I insert an audio track in an audio timeline without stepping all over clean material? Is it possible to recover the "clean" track bridge?

Am doing an audio timeline in GB. Need to insert a corrected section of track. When I try the insert, it knocks out the top part of the adjacent track bridge/element. How can I insert cleanly in a timeline? Is it possible to "recover" the good track that was "stepped on?"

Undo what?
Insert in a new track?
I don't think so. I've started an audio book and I'm doing chapter long segments (assuming I can make simple corrections, such as ones made in iMovie and numerous other video editing programs. Routine edits in GB are simple and intuitive. I cannot wrap my mind around the fact that I'm prevented from doing a simple drag and drop, import or paste a two-sentence audio clip. Nor can I find any reference to straightforward audio elements.
Any suggestions you might have would be appreciated.

Is it possible to automatically trigger a camera when someone arrive in the background hahaha.. Just a wild thoughts you know, like when someone suddenly pop up, the camera will automatically fire. I'm planning to use it in our Horror tunnel this october.

Is it possible to automatically trigger a camera when someone arrive in the background hahaha.. Just a wild thoughts you know, like when someone suddenly pop up, the camera will automatically fire. I'm planning to use it in our Horror tunnel this october.

You could try to use a motion sensor - in a do-it-yourself store you can buy motion sensors that turn on the lights when a burglar approaches the property. Connect this sensor to the remote control of your camera instead of to a light.
Probably you can buy ready-made motion sensitive remote controls, the photographers here will know. You would need this kind of remote control for wildlife photography.

"Automatically retrieve CD track names from internet" not working

I'm about to begin re-ripping all my CDs (400+) which I haven't done since at least 14yrs ago in order to take advantage on newer/better formats. I was excited to see that iTunes can automate a lot of this process with the following two options:
- When you insert a CD: (Import CD and Eject)
- [ ] Automatically retrieve CD track names from internet
Found in the "Playback" settings of iTunes 10.1.1
However after inserting my first CD, I noticed it started to import without downloading the track names first. Obtaining track names manually is working for me because if I choose "Advanced -> Get track names" it accesses Gracenote DB and works fine.
It's just the automatic operation after inserting a CD that is not working. This causes me to have to:
1) Insert CD
2) Choose "Advanced -> Get track names"
3) Click "Import CD"
4) Eject
as opposed to the one supposedly promised step of "Insert CD" and have the other 3 things happen automatically.
I've tried deleting my iTunes plists in my ~/Library/Preferences/ folder but it still works the same.
Any suggestions?

You can seach the Gracenote site directly. I don't know if that would help you decide which option you needed to use.
http://www.gracenote.com/music/index_old.html

Score: is it possible to automatically place multiple rests on a part?

Score: is it possible to automatically place multiple rests on a part?
(Rohan?)

hehe...why would you think i would answer
this....:-)
no its not possible. be a good feature though
wouldn't it?
or maybe...
...it wouldn't.
it could probably easily be done but that would stop
you going through a part and inserting them...and
checking for mistakes and ommissions as you go.
my routine with parts means i can usually catch any
errors as i go. if it were automated i would probably
have so many mistakes the musos eyes would bleed.
As a "score guy" also I am inclined to agree with you Rohan.

Possible to Join Two Mono Tracks to Stereo, Or Change Panning of a Stereo?

In the new Garage Band 11, is it possible to Join Two Mono Tracks to Stereo, or Change the Panning of a Stereo track, or split a stereo track into two mono files?
Sometimes it would be convenient when I have a lot of tracks to combine two mono tracks into one stereo track to eliminate an additional track.
Also, I find that I often want to change the panning of a stereo track to either make it wider, or merge the two channels, even reverse L&R. If no way to change the panning of a stereo track can a stereo track be split into two mono tracks to be panned differently?

Woodwyn wrote:
is it possible to Join Two Mono Tracks to Stereo
only by exporting the two tracks
or Change the Panning of a Stereo track
you can pan a stereo track in every version of GB with the pan knob
or split a stereo track into two mono files?
indirectly:
http://www.bulletsandbones.com/GB/GBFAQ.html#stereotomono
(Let the page FULLY load. The link to your answer is at the top of your screen)
want to change the panning of a stereo track to either make it wider, or merge the two channels
that's different. no, you'd have to split the track into two mono files as described above.
even reverse L&R.
same answer

Is it possible to download a split track accompaniment CD onto an iMac and play it back without the voices?

Does anyone know if it is possible to download an split track accompaniment cd to the iMac and then play it back and tune the voice track out?

Hello,
No expert, but since noby else is answering, try Audacity...
http://audacity.sourceforge.net/download/mac

Can't automatically retrieve CD track names after upgrade to 9.0.2

I can't automatically retrieve CD track names from Internet after upgrade itunes to 9.0.2. Is it a bug for this update or I did something worng. I am using macbook pro with 10.5.8. Thanks.

I have exactly the same problem. The MP4 files are valid and I'm using the same application to create them as I always did. I drag the MP4 file to itunes and nothing happens. If I use "Add File" or "Add Folder" nothing happens. If you find a fix, let me know because this is a major impact to me as well!

Is it possible to automate flash apps and games

Hi,
Im really new to flash. I only just started learning about it today.
I was wondering if its possible to automate games and apps that have been written in flash.
For example.
Suppose a simple card game was written in flash. To automate it I would need to
-read all of the values of all labels on the screen.
-figure out the location and identity of active objects like buttons and text boxes.
I suppose these values could be passed to some kind of executable flile running outside the browser
which would then move the mouse and click the buttons as desired.
Mabey there is a better way of doing this ?
I tried running flash apps in Firefox with firebug and fireflash installed to see if I could see what was going on inside
the flash files. It didn't work. Mabey debugging has to be enable inside the files themselves which is no use if they are owned
by somebody else.
Can anyone guide me in the right direction here. Is it possible to automate a gmae somebody else has written in flash ?.
Mark.

SWF file is a compiled code. This means that it comes in form of encrypted code and needs its own interpreter - Flash player plugin. As Ned said, no other program can see compiled code. Browser sees only <object> and it positions it according to DOM architecture. Firebug is a proxy that is capable to display network requests along with DOM architecture, JS, and CSS. Firebug has no access to SWF code either.
If your question is about how to expose particular parts of your application - the way to do that is to implement traces inside Flash. These traces can be output in some debugging software (for instance FlashTrace) at runtime. But, again, these tools cannot see more than traces.

Is it possible to automatically create file names?

If i do a set of measurements and i want to save each measurement in own file is it possible to automatically create filenames? For example XXX1.vi XXX2.vi ... XXXn.vi

Is the n in XXXn a counter or a test number? See my attached example Create Report File from Serial Number. It creates a report file name starting with the serial number of the UUT and then appending a counter. You don't have to save the counter: the program looks for the next available filename on disk.
Your question shows file names ending in .vi. You may not have intended it, but don't use .vi for data files: save that extension for real VIs. If each measurement has its own VI and you want to name the datafile based on the name of the calling VI, see my attached example Create Report File from Calling VI. It gets the name of the calling VI and creates a .txt file with the same name as the caller (with the new extension .txt).
Attachments:
Create_Report_File_from_Serial_Number.vi ‏58 KB
Create_Report_File_from_Calling_VI.vi ‏46 KB

Why am I unable to delete the default track (which seems to act as the master, right?) after making a rough mix? Is it possible to delete the default track after having rendered a mix?

Why am I unable to delete the default track (which seems to act as the master, right?) after making a rough mix? Is it possible to delete the default track after having rendered a mix? I did a rough mix and now cannot change the song as the tracks that were a part of the rough mix seem to remain in the song even though I mute the tracks for a new mix. For instance, I played and recorded a different bass line. Muted the original, but when trying to create the new mix I can hear the original bass line even though I have muted that track. It seems to remain in the previous master (default) track. Please send help. Thank you.

Before answering your question, you have to make sure you understand the difference between the different track types in GarageBand.
Tracks, you record your music on
There are three types of those Tracks.
MIDI Tracks (aka Software Instrument Tracks)
Audio Tracks (aka Real Instrument Tracks)
Drummer Track (only one per Project)
Global Tracks
These are the Tracks that can be shown/hidden at the top of the Tracks Area for specific purposes.
Arrangement Track
Movie Track
Transposition Track
Tempo Track
Master Track
This Track can also be shown/hidden in the Tracks Area. Please note, you cannot delete that Track, only hide it, similar to the Global Tracks
Regarding the Tracks you record your music on, you can delete any of those. It doesn't matter if you created them or there are part of a Template (maybe that is what you refer to as the default track). Once you delete the last Track, the "New Track Window" will pop up to add a new track.
I will explain all that in much more detail in my manual "GarageBand X - How it Works".
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Is it possible to automatically unwrap all instancies of a element in Frame 7.2 ?

Hi all, Is it possible to automatically unwrap all instancies of a element called "Table Cell" in Frame 7.2 ? I can unwrap manually but there are over 400 instanticies!! No longer needed due to a template update. Thanks in advancce

If you have an XML application set up that supports both import and export, you could
include a very simple XSLT transform in one direction that does the unwrapping.
--Lynne

Is it possible to Automate configuration of skydrive pro client for a document library

Hi Everyone,
I would like to automate the document library url(configuration) for skydrive pro client programatically.Please let me know if this is possible and how can we do this.
Thanks in advance,
Sailaja Kaladurgi.

It's not possible to automate that. Although you can trigger a standard word-search using JavaScript, you can't do anything with the results - they just appear in the user interface. There's no GREP functionality so you can't search for an extended block of page content, and there's also no way to select or extract a specific region of a page into a new file using scripts.
The only way I could think of doing this would be in InDesign - assuming each question starts with a distinct element that can be GREPped for, you could separate each one onto a new page by running a search/replace that add a page break in front of the element. You can then export all the 'single-question' pages as images, and use PS automation to trim the whitespace.

Is it possible to automate the times that certain Mail accounts are online?

I have two personal email accounts that I'd like to have active at all times, but I have a third email account that I only wish to be online/receiving emails during my usual business hours. I know that I can select for individual accounts to be offline/online, but is it possible to automate this?

randers4,
THANKS! But, I'm not using EXCHANGE. My web site and e-mail are hosted on Google-based servers using POP3.
Thanks!
Rampager83

IS IT POSSIBLE TO AUTOMATE AN APPEGGIATED TRACK??

Similar Messages

Maybe you are looking for