Is it possible to automate chart titles?

I'm using Numbers 3.2.2 and would like the chart title of an XY scatter chart to be updated automatically with today's date. Is there a way I can do this? In my spreadsheet the formula for my title is: ="Cost vs. Time updated to September "&DAY(NOW()) . When I copy this to my chart title the whole thing appears as text and I haven't found a way of turning it into a formula. Any help is appreciated.
Thanks

Don't use the chart title. Turn it off and put a one-cell table where the chart title should be. In that one cell put the formula for your chart title.

Similar Messages

Changing the Chart Title in Graphic View in Interactive demand Planning

Hi All,
Is it possible to change the Chart title in Graphic View in interactive demand planning screen.
When we go to interactive planning after loading the data we go to Univariate forecast then switch to graphic, the chart title shows the selection at which the planning is done. For eg; If I plan at die level and i select a particular sap material, the chart title displays Die value and not the material value.
Is it possible to change the chart title such that it displays all the selections made in selection winodw, like in the above case both Die value as well as SAP Material Number.
Thanks and Regards,
Diana

Dear Diana,
unfortunately this is not possible.
The chart title is build from the planning book name + the Show characteristic in the shuffler (+ available nav. attributes of the Show char).
The functionality you requested doesn't exist in standard.
Regards,
Tibor

Chart Title

I have a bar chart that prints within a group. I want the title of the chart to be based on the group value
<?for-each-group:ROWSET2_ROW;./GROUP_FIELD?>
<?GROUP_FIELD?>
Is this possible? Where do I set the Chart title so it displays on the top of each chart?
Thanks

You would need to alter the chart text (chart ->Size ->Alt text).
<Title text="{GROUP_FIELD}" visible="true" horizontalAlighment="CENTER"/>
Check out the "Chart Support" section of the BI Publisher guide for details.
Thanks,
Bipuser

Is it possible to automate the process...?

Dear members!
Is it possible to automate the process of subtitling? For example if I have MS Word file with the following table:
Starting Timecode
Ending Timecode
Language of Original
Local Language
0001
00:00:06:00
00:00:06:01
0002
00:01:10:18
00:01:12:02
0003
0004
Is there any way to put that file on timeline in Premiere to superimpose subtitles with dialogues (for example) of Original Language? Can anyone give me step-by-step instruction on how to do that? I can edit text file in MS Word and delete unneeded column. Manual making of a few thousand titles is so boring!
As a result I have to export AVI file with superimposed subtitles on screen.
Thanx in advance to everybody!

I believe that using After Effects is a lot easier because you can change the source text with keyframes.
Take a look at this thread and watch the tutorial I did to demonstrate this.
http://forums.adobe.com/message/4770932#4770932

Possible to automatically download specific episodes from subscribed podcast?

I'm wondering if it's at all possible to automatically download only specific episodes in a subscribed podcast without downloading any of the other episodes.
IE: I subscribe to G4TV.com Web Shows Podcast specifically to watch the MMO Report episodes. I have no interest in any of the other episodes that form part of the podcast so I don't want to waste precious bandwidth downloading them automatically. Is there any way to setup a smart way to download only episodes with specific words or phrases in the title in the subscribed podcast? I love the auto download option of podcasts so I don't really want to have to manually go and check for new episodes to download.

No, there is no ftp server in the TC so it won't work.. upload the file to service. There are tons of places on the web whereby you can share a few files.. google sites excellent.

Is it possible to import a title from Premiere Pro into AfterEffects?

Is it possible to import a title from Premiere Pro into AfterEffects?
AE CS6
PP CS6
Thank you,
Robert

You can render the title out of Premiere Pro as a movie and bring it into After Effects as a video file. Titles aren't automatically converted when you copy and paste from Premiere Pro to After Effects or use Dynamic Link to send something to After Effects.
You can submit feature requests here:
http://www.adobe.com/go/wish

Line below Chart title

Hi all,
Is there a way to remove the line that stretches below a title of a chart in 11g?? When i type in a chart title it automatically places a line below the title.
Thanks

Hi Okelly,
Are you referring to Chart using BIP Builder online or RTF?
regards
Jorge

Is it possible to automatically trigger a camera when someone arrive in the background hahaha.. Just a wild thoughts you know, like when someone suddenly pop up, the camera will automatically fire. I'm planning to use it in our Horror tunnel this october.

Is it possible to automatically trigger a camera when someone arrive in the background hahaha.. Just a wild thoughts you know, like when someone suddenly pop up, the camera will automatically fire. I'm planning to use it in our Horror tunnel this october.

You could try to use a motion sensor - in a do-it-yourself store you can buy motion sensors that turn on the lights when a burglar approaches the property. Connect this sensor to the remote control of your camera instead of to a light.
Probably you can buy ready-made motion sensitive remote controls, the photographers here will know. You would need this kind of remote control for wildlife photography.

Is it possible to extend the title of a "DATE" column?

Hi I have made a table;
SQL> SELECT * FROM BookCopy;
BCID BTID DATEACQUI DATEDESTR
120 9 09-FEB-06
But the title is meant to say "DATEACQUIRED" but it only says "DATEACQUI"
Does anyone know if it is possible to extend the title without using VARCHAR, thanks

Hi,
In SQL*Plus, you can set the width of a DATE column the same way you do it for a VARCHAR2.
COLUMN dateacquired FORMAT A12
SELECT SYSDATE AS dateacquired
FROM dual;produces
DATEACQUIRED
29-JAN-09

How to use the region parameter of main report for subreport chart titles?

I am using Crystal Reports 11.
I create 1 main report with 10 sub-reports that contain cross-tabs & charts. The main report has a parameter regarding 3 different areas: region1, region2, and region3.
I use the method of adding the u2018regionu2019 parameter of main report to the selection formula of the sub-reports. So, I can select 'region' from main report to controll outputs in sub-reports by region.
I use formulas for chart titles, e.g.:
Select {Product Code}
Case 'a111':
u2018Region1 u2013 a111 Counts'
Case u2018b222u2019:
u2018Region1 u2013 b222 Counts'
u2026
u2026
Default:
u2026
Since I pass the u2018regionu2019 parameter of main report to sub-reports, I have to change chart titles dynamically based on the region I select.
How can I use the region parameter from main report in the formulas to get chart titles dynamically?
Thank you in advance.

Thank you.
I am not using Chart Title with "Chart Expert".
I am using a formula for chart titles, e.g.:
Select {Product Code}
Case 'a111':
u2018Region1 u2013 a111 Counts'
Case u2018b222u2019:
u2018Region1 u2013 b222 Counts'
u2026
u2026
Default:
u2026
I drag this formula above the charts and it looks like a dynamic title. So, for product a111, the chart title would be "Region1 u2013 a111 Counts"; for product b222, the chart title would be "Region1 u2013 b222" Counts; and so on ...
Because I pass the region parameter from master report to subreport, I want to change the region part of the chart titles dynamically.
For example,
when select Region1, the chart titles should be: "Region1 u2013 a111 Counts"; "Region1 u2013 b222"; ...
when select Region2, the chart titles should be: "Region2 u2013 a111 Counts"; "Region2 u2013 b222"; ...
I want to add the region parameter into the tiltle formula.
How should I do?

Flex 4 Chart title won't move when positioned

Hi,
I have an issue with my horizontal chart title in my Flex 4 bar chart--it just won't move when I try to position it someplace other than the default (which is center).
I followed the example in the livedocs: http://livedocs.adobe.com/flex/3/html/help.html?content=charts_displayingdata_05.html, specifically the one using the 'titleRenderer" property of the AxisRenderer, and setting it to my custom AxisRenderer class. Here is my code:
package classes.view
    import mx.charts.*;
    import mx.charts.chartClasses.ChartLabel;
    public class ChartTitleRenderer extends ChartLabel
        public function ChartTitleRenderer()
            super();
        override protected function updateDisplayList(w:Number, h:Number):void {
            super.updateDisplayList(w, h);
            this.setStyle("textAlign","left");
Setting the textAlign property doesn't work. I have tried setting this property in the css as well and applying it directly to the axis, which also doesn't work. I have also tried "this.x = -100" etc, to no effect. Any ideas?
Thanks

Ray,
To do the "masking" that you are referring to, I think that two Effects (explore each, to see which works best for you), will give you what you want:
The Crop Effect, applied to the Still Images in Video Track 3. This Effect can be Keyframed to change, as is required over time.
The 4-Point Garbage Matte Effect.
If the Still on Video 2 is sized to the Frame of the Project, say 1920 x 1080 for Full-HD, it will "cover" the Video on Video Track 1.
Note: it is best to Scale the Still Images to very close to what you want/need, in PS, or PSElements, prior to Import. What you are doing with the Still Images in Video Track 3 is creating a PiP (Picture in Picture). This ARTICLE goes into more detail on
Good luck,
Hunt

Line Break in Chart Title??

Hi! Does anyone know how to make a line break in the title of a chart? For some reason, just pressing return or any combination of return with option, control, shift, etc. does not seem to be working... the title is really long to be on a single line and I'm not able to change the size either.

Hi kp,
True for Category titles, which are taken from a header column (see examples— Cat 1 through Cat 4 on table and chart below), but not for the Chart title, which displays an option return as a space, and whose box extends horizontally to accommodate the whole title in a single line, even when that line extends beyond the screen/page boundary (see example on chart).
Table names, when shown, are carried in a box that expands only to the width of the table to which they belong, which led to the example above the chart:
For the table example, there are two tables,
"Table with...title" contains two columns, and is placed behind "Table 1", the table containing the data. Only the first table has the Show title box checked.
Just a parlour trick, though—no advantage I can see to using this method of displaying a long table name over using a text box, as suggested earlier by Jerry.
I can see where your suggestion regarding category names could have some merit, though. Its disadvantage is in doubling the height of the rows from which those names are grabbed.
Regards,
Barry

How to modify a chart title

I have created a chart in Keynote with a title. But the title is really close to the data, and I would like to increase the space between title and chart, but I don't know how. I cannot even cheat by adding a return and creating an empty second line below the actual title.
I know that I could create a seperate textbox to avoid this problem, but I will have to create many charts and I want the distance to be always the same, and I need the feature to turn the title on and off.
By the way: it is a line chart.
Message was edited by: How to modify a chart title

Dear How to modify a chart title,
I think you're going to have to become accustomed to the default position of the title. You can Provide Feedback to Apple using the form available in the Keynote app menu and tell them that you would like this option on the Chart Title feature. My guess is that it won't be high on their priority list since you do have the text box option to fall back on.
Good luck,
Jerry

Is it possible to change the title of a PDF?

Titles of downloaded PDF material do not reflect the contents of the PDF in some cases. Iss it possible to edit the title?

The short answer is no, that's not possible, but it IS possible to import multiple pages at one time.
My favorite script for this is from Scott Zanelli: InDesignSecrets » Blog Archive » Zanelli Releases MultiPageImporter for Importing both PDF and INDD Files, but there's also a sample script included with ID.

Score: is it possible to automatically place multiple rests on a part?

Score: is it possible to automatically place multiple rests on a part?
(Rohan?)

hehe...why would you think i would answer
this....:-)
no its not possible. be a good feature though
wouldn't it?
or maybe...
...it wouldn't.
it could probably easily be done but that would stop
you going through a part and inserting them...and
checking for mistakes and ommissions as you go.
my routine with parts means i can usually catch any
errors as i go. if it were automated i would probably
have so many mistakes the musos eyes would bleed.
As a "score guy" also I am inclined to agree with you Rohan.

Is it possible to automate chart titles?

Similar Messages

Maybe you are looking for