Is it possible to automate JDE with QTP ?

Hi,
Is it possible to automate JDE ( JD edwards) with QTP ( QuickTest professional from HP)?
is a plug in/ add in needed ?
thanks in advance

How is your question about the combination of it?

Similar Messages

TS1398 can i possibly download from iOS 6 back to iOS 5? there are so many glitch with this new iOS 6, iTunes does not automatically syncing with my iPad2. Messages keeps on logging out, I have to log in again and again, including Facebook it is also acti

I am very excited with this ios 6, but now am very regretful that why did i updated my ios because the new ios 6 did not live up to my expectations, Youtube was gone, iTunes cannot automatically sync with my iPad, iMessages is logging out automatically, even facebook is acting wierd. facetime connection is very poor there are so many glitches with this ios 6. And I know that it is impossible for me to turn back safely to ios 5.1.1 now. Are there any suggestions you can give me? I just want my iPad 2 back to its normal and efficient stage again. Thanks

I am sorry to tell you that Apple does not provide a downgrade path for iOS. There are unsupported methods for doing so, but we are forbidden to provide that information on these forums.

Is it possible to connect indesign with database/OOD...

Hello fellow Indesign user,
Not sure if this question belongs here or in scripting...
I'm just a moderate user in ID CS4 and I got this daunting task to find/invest a way to use Indesign (our existing layout software) to create "brochures/instruction manuals" using databases or OOD. Meanings, use a template, add a code that corresponds to a similar code with pre-defined data-entity in a database/OOD, and automatically add the text/pictures from the database/OOD.
We are not talking about addresses or simple things like that, but brochures and instruction manuals in different languages with different or similar operation for each machine. Some instructions are the same and some are not. Get my drift?
We are using ID Cs4 in the company right now, not the smartest tool to use when producing 25 different brochures/technical manuals with different languages. Changing one content in one manual, meaning we have to change all 25 brochures/manuals.... manually...
Many of you may think -"why did you start ID in the first place". The answer: I don't know, I wasn't here then... It is not until now they discovered -"Oh, we need a new system… " and guess who got the task to evaluate it…
I need to know if it is possible and to what extent we can use ID with database or an OOD-system to retrieve data (mostly custom data with bulletin, font, size, pictures, etc).
Articles, links and other information would be very helpful….
Thanks!
//Vincent

What kind TM exist out there and is it possible to integrate it with ID? (I can probably check Wikipedia, but it feels correct to ask the right question to ask to the right person here. How does your firm manage multilingual contents in ID? You gotto have the same problem as I do, at least to some extent…
How is it even possible to have an automated system and still have that flexible design freedom in ID..? Many questions here…
To invest a complete new system is not an option anymore. I made some calculation and plenty of phone calls. The figures does not look good at all… it’s simply not worth the time and money. So what are the options, if we keep ID in the firm?
Well, I should have had lots of time to answer your questions this evening, but it turns out that we're both out of luck. I'll cover a few things quickly to give you some Google-fodder:
1) Okay, I won't suggest expensive commercial solutions.
2) Read up about how to flow XML content into and out of ID
2b) Store your content in the DB of your choice, spit out XML, and then update your INDDs with it.
3) Think about an open-source TM app like OmegaT
4) Do you do all of your translations in-house? If not, ask your suppliers how they work.
5) But really, if you don't have a completely obsessive person in charge of making sure everything is up to date, you're asking for trouble. I'm reminded of a quote by Edward Tufte who was talking about project management; I can't remember the quote, but the idea boiled down to the fact that you can do just as good a job with whiteboards as you can with databases. At least right now you know that you haven't kept all versions up to date... if you were housing all your content in a database, then the update process is somewhat hidden from you, and you wouldn't know if something broke unlesss you caught it in QA. If you're not doing all the updates... then you can't do good QA.This is a recipe for disaster.
5b) Establish a good workflow with whatever tools you have (database, whiteboards, little strings with knots tied in 'em, notches carved in the thighbones of extinct birds of prey, etc.) and give someone the power to sanction/punish/fire people who disobey workflow rules. I am not kidding.
I will make more useful suggestions (suggestions more useful than 5b, at any rate) in the near future.

Possible? Master slide with changing image?

Let's say I have a presentation with 20 slides. For simplicity, all 20 use the same master.
I would like to have a little image of our company's logo in one corner, which starts off vertical but rotates as I go through the slides as a sort of visual progress hint; so at half way through the slides it would be inverted, and on the last slide it would be vertical again.
Of course I could manually rotate the image on each slide, but this would be tedious and would have to be re-done if I changed the number of slides, or the order of the slides.
Is it possible to automate this in Keynote, perhaps using builds or some extension of slide numbering? Ideally it would be robust to changes in the number and order of slides. Or am I just asking too much?
I'll be interested to hear your ideas.
Glenn.

Let's say I have a presentation with 20 slides. For simplicity, all 20 use the same master.
I would like to have a little image of our company's logo in one corner, which starts off vertical but rotates as I go through the slides as a sort of visual progress hint; so at half way through the slides it would be inverted, and on the last slide it would be vertical again.
Of course I could manually rotate the image on each slide, but this would be tedious and would have to be re-done if I changed the number of slides, or the order of the slides.
Is it possible to automate this in Keynote, perhaps using builds or some extension of slide numbering? Ideally it would be robust to changes in the number and order of slides. Or am I just asking too much?
I'll be interested to hear your ideas.
Glenn.

Flex Automation with QTP 10 (SDK 3.2 & 3.5) Error

I have been able to get very basic applications to work with the automation libraries and then with QTP.The issue I'm having is with the actual project I would like to automate. I have done all of the steps to install automation correctly and have also put the additional compiler arguments into flex. However when the application is initialzing I get the following errors:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at mx.automation::AutomationManager$/addDelegates()[C:\work\flex\dmv_automation\projects\aut omation\src\mx\automation\AutomationManager.as:564]
    at mx.automation::AutomationManager$/addDelegates()[C:\work\flex\dmv_automation\projects\aut omation\src\mx\automation\AutomationManager.as:533]
    at mx.automation::AutomationManager$/addDelegates()[C:\work\flex\dmv_automation\projects\aut omation\src\mx\automation\AutomationManager.as:533]
    at mx.automation::AutomationManager$/addDelegates()[C:\work\flex\dmv_automation\projects\aut omation\src\mx\automation\AutomationManager.as:533]
    at mx.automation::AutomationManager$/addDelegates()[C:\work\flex\dmv_automation\projects\aut omation\src\mx\automation\AutomationManager.as:533]
    at mx.automation::AutomationManager$/addDelegates()[C:\work\flex\dmv_automation\projects\aut omation\src\mx\automation\AutomationManager.as:512]
    at mx.automation::AutomationManager$/addDelegates()[C:\work\flex\dmv_automation\projects\aut omation\src\mx\automation\AutomationManager.as:512]
    at mx.automation::AutomationManager/childAddedHandler()[C:\work\flex\dmv_automation\projects \automation\src\mx\automation\AutomationManager.as:263]
    at flash.display::DisplayObjectContainer/addChildAt()
    at mx.managers::SystemManager/preloader_preloaderDoneHandler()[C:\autobuild\3.5.0\frameworks \projects\framework\src\mx\managers\SystemManager.as:3135]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.preloaders::Preloader/displayClassCompleteHandler()[C:\autobuild\3.5.0\frameworks\proj ects\framework\src\mx\preloaders\Preloader.as:435]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.preloaders::DownloadProgressBar/timerHandler()[C:\autobuild\3.5.0\frameworks\projects\ framework\src\mx\preloaders\DownloadProgressBar.as:1451]
    at mx.preloaders::DownloadProgressBar/initCompleteHandler()[C:\autobuild\3.5.0\frameworks\pr ojects\framework\src\mx\preloaders\DownloadProgressBar.as:1503]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.preloaders::Preloader/dispatchAppEndEvent()[C:\autobuild\3.5.0\frameworks\projects\fra mework\src\mx\preloaders\Preloader.as:291]
    at mx.preloaders::Preloader/appCreationCompleteHandler()[C:\autobuild\3.5.0\frameworks\proje cts\framework\src\mx\preloaders\Preloader.as:443]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.core::UIComponent/dispatchEvent()[C:\autobuild\3.5.0\frameworks\projects\framework\src \mx\core\UIComponent.as:9440]
    at mx.core::UIComponent/set initialized()[C:\autobuild\3.5.0\frameworks\projects\framework\src\mx\core\UIComponent.as :1168]
    at mx.managers::LayoutManager/doPhasedInstantiation()[C:\autobuild\3.5.0\frameworks\projects \framework\src\mx\managers\LayoutManager.as:718]
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at mx.core::UIComponent/callLaterDispatcher2()[C:\autobuild\3.5.0\frameworks\projects\framew ork\src\mx\core\UIComponent.as:8744]
    at mx.core::UIComponent/callLaterDispatcher()[C:\autobuild\3.5.0\frameworks\projects\framewo rk\src\mx\core\UIComponent.as:8684]
Here are the additional compiler arguments that I put into Flex:
-include-libraries "C:\Program Files\Adobe\Flex Builder 3\sdks\3.2.0\frameworks\libs\automation.swc" "C:\Program Files\Adobe\Flex Builder 3\sdks\3.2.0\frameworks\libs\automation_agent.swc" "C:\Program Files\Adobe\Flex Builder 3\sdks\3.2.0\frameworks\libs\qtp.swc" "C:\Program Files\Adobe\Flex Builder 3\sdks\3.2.0\frameworks\libs\automation_dmv.swc"
Does anyone have any ideas on how to solve this? I've tried using the automation APIs for 3.2 and 3.5 but both yield the same result.

The application that I'm working with uses the code-behind method of flex development. Has anyone had any issues working with QTP with a project using this method? Any information/ideas are appreciated.
Thanks

Score: is it possible to automatically place multiple rests on a part?

Score: is it possible to automatically place multiple rests on a part?
(Rohan?)

hehe...why would you think i would answer
this....:-)
no its not possible. be a good feature though
wouldn't it?
or maybe...
...it wouldn't.
it could probably easily be done but that would stop
you going through a part and inserting them...and
checking for mistakes and ommissions as you go.
my routine with parts means i can usually catch any
errors as i go. if it were automated i would probably
have so many mistakes the musos eyes would bleed.
As a "score guy" also I am inclined to agree with you Rohan.

My client with autism needs to be able to speak/sing into a microphone and simultaneously hear his voice through a headset, preferably with reverb set on high. Is it possible to do this with the iPad and OS7? If so, what setup do I need?

My client with autism needs to be able to speak/sing into a microphone and simultaneously hear his voice through a headset, preferably with reverb set on high. Is it possible to do this with the iPad and OS7? If so, what setup do I need? I have a SM58 type mic and-over-the ear headphones.

This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference.

Is it possible to automate flash apps and games

Hi,
Im really new to flash. I only just started learning about it today.
I was wondering if its possible to automate games and apps that have been written in flash.
For example.
Suppose a simple card game was written in flash. To automate it I would need to
-read all of the values of all labels on the screen.
-figure out the location and identity of active objects like buttons and text boxes.
I suppose these values could be passed to some kind of executable flile running outside the browser
which would then move the mouse and click the buttons as desired.
Mabey there is a better way of doing this ?
I tried running flash apps in Firefox with firebug and fireflash installed to see if I could see what was going on inside
the flash files. It didn't work. Mabey debugging has to be enable inside the files themselves which is no use if they are owned
by somebody else.
Can anyone guide me in the right direction here. Is it possible to automate a gmae somebody else has written in flash ?.
Mark.

SWF file is a compiled code. This means that it comes in form of encrypted code and needs its own interpreter - Flash player plugin. As Ned said, no other program can see compiled code. Browser sees only <object> and it positions it according to DOM architecture. Firebug is a proxy that is capable to display network requests along with DOM architecture, JS, and CSS. Firebug has no access to SWF code either.
If your question is about how to expose particular parts of your application - the way to do that is to implement traces inside Flash. These traces can be output in some debugging software (for instance FlashTrace) at runtime. But, again, these tools cannot see more than traces.

Is it possible to automatically create file names?

If i do a set of measurements and i want to save each measurement in own file is it possible to automatically create filenames? For example XXX1.vi XXX2.vi ... XXXn.vi

Is the n in XXXn a counter or a test number? See my attached example Create Report File from Serial Number. It creates a report file name starting with the serial number of the UUT and then appending a counter. You don't have to save the counter: the program looks for the next available filename on disk.
Your question shows file names ending in .vi. You may not have intended it, but don't use .vi for data files: save that extension for real VIs. If each measurement has its own VI and you want to name the datafile based on the name of the calling VI, see my attached example Create Report File from Calling VI. It gets the name of the calling VI and creates a .txt file with the same name as the caller (with the new extension .txt).
Attachments:
Create_Report_File_from_Serial_Number.vi ‏58 KB
Create_Report_File_from_Calling_VI.vi ‏46 KB

How to make an automatic percentage with a catégory

Hello,
Thank you if you answer to my problem and also if you know the response !
So, I have 3 cells :
-A : with the category (lets make category game, food and books..)
-B : the price
-In C : I would like numbers to calculate automatically the cost with percentage (B x30%) if the category is "game", or B x 40% if the category is food, etc...
Is it possible in one formula ? And also if I have about 10 categories...?
Now, I know this formula wich is working only for one category, but I don't know how to add the variable about the category :
sumif (A;book;B)*30%
For example I would like in the same formula :
sumif (A;book;B)*30% or (A;game;B)*40% .....
With this formula, each time I will make a new entry in A with for example "book", and the price in B, the cell C will be automatically fill with the good percentage.
I hope someone know the answer.
Thank you very much.

Hello
I repeat that all what is needed is in the guide.
=SI(ESTERREUR(RECHERCHEV(A;rates :: $A:$B;2;0));"";ARRONDI(B*RECHERCHEV(A;rates :: $A:$B;2;0);2))
=IF(ISERROR(VLOOKUP(A,rates :: $A:$B,2,0)),"",ROUND(B*VLOOKUP(A,rates :: $A:$B,2,0),2))
Here it returns an empty string if the category is unavailable.
If you want a true zero, use:
=SI(ESTERREUR(RECHERCHEV(A;rates :: $A:$B;2;0));0;ARRONDI(B*RECHERCHEV(A;rates :: $A:$B;2;0);2))
=IF(ISERROR(VLOOKUP(A,rates :: $A:$B,2,0)),0,ROUND(B*VLOOKUP(A,rates :: $A:$B,2,0),2))
Yvan KOENIG (from FRANCE samedi 1 août 2009 23:04:53)

Is it possible to Automate configuration of skydrive pro client for a document library

Hi Everyone,
I would like to automate the document library url(configuration) for skydrive pro client programatically.Please let me know if this is possible and how can we do this.
Thanks in advance,
Sailaja Kaladurgi.

It's not possible to automate that. Although you can trigger a standard word-search using JavaScript, you can't do anything with the results - they just appear in the user interface. There's no GREP functionality so you can't search for an extended block of page content, and there's also no way to select or extract a specific region of a page into a new file using scripts.
The only way I could think of doing this would be in InDesign - assuming each question starts with a distinct element that can be GREPped for, you could separate each one onto a new page by running a search/replace that add a page break in front of the element. You can then export all the 'single-question' pages as images, and use PS automation to trim the whitespace.

Is it possible to automate creation of roles,users & assign roles to users

Respected Guru's,
Is it possible to automate creation of roles according to our functional requierment with the help of SAP IDM.
Futher, i would like to know whether creation and deletion of users along with assigning created roles to the user's can be automated.
Please help me....
Thank you.

Hi Dayananadan,
SAP NW IdM is compatible with your system and uses SAP Java Connector (JCo).
My colleague Steffen Baumann wrote a blog with three parts, where you get some hints and screenshots how to create similar objects to business roles and automatically assign them. Have a look at the last two parts How To synchronize data from SAP HCM to SAP NetWeaver Identity Center using SAP PI (Part II) and
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/8868. [original link is broken] [original link is broken] [original link is broken] Especially the last topic in the last part shows how to implement dynamic groups. It's not everything covered you will need to automatically create business roles and assign them. To explain this in detail is like writing another blog... If you go through the last two parts of the blog you will know how to modify the jobs my colleage has used for importing HCM data to create business roles similar to org. units.
You can also have a look at /docs/DOC-8983#section6. There you find "Identity Management for SAP System Landscapes: Configuration Guide" and other documents. They help to get familar with the possibilites of SAP NW IdM, but don't mention how to implement your case in detail.
Best regards,
Nils

Is it possible to automate the process...?

Dear members!
Is it possible to automate the process of subtitling? For example if I have MS Word file with the following table:
Starting Timecode
Ending Timecode
Language of Original
Local Language
0001
00:00:06:00
00:00:06:01
0002
00:01:10:18
00:01:12:02
0003
0004
Is there any way to put that file on timeline in Premiere to superimpose subtitles with dialogues (for example) of Original Language? Can anyone give me step-by-step instruction on how to do that? I can edit text file in MS Word and delete unneeded column. Manual making of a few thousand titles is so boring!
As a result I have to export AVI file with superimposed subtitles on screen.
Thanx in advance to everybody!

I believe that using After Effects is a lot easier because you can change the source text with keyframes.
Take a look at this thread and watch the tutorial I did to demonstrate this.
http://forums.adobe.com/message/4770932#4770932

Is it possible to automate wifi "on" and "off" based on geofencing

Is it possible to automate wifi “on” and “off” based on geofencing so that it only turns on wifi when I am at home? I don’t want it connecting to Karma/pineapple router at Starbuck’s? If I understand correctly when wifi is turned “on” my phone is constantly probing and asking networks if they are my home network and Karma will respond that it is. I’m not sure how Karma handles WPA If my Phone expects the network to be secure, but I don’t want my phone handing out my e-mail password, so I’d feel better if it automatically switched to cellular when I leave the house.

SWF file is a compiled code. This means that it comes in form of encrypted code and needs its own interpreter - Flash player plugin. As Ned said, no other program can see compiled code. Browser sees only <object> and it positions it according to DOM architecture. Firebug is a proxy that is capable to display network requests along with DOM architecture, JS, and CSS. Firebug has no access to SWF code either.
If your question is about how to expose particular parts of your application - the way to do that is to implement traces inside Flash. These traces can be output in some debugging software (for instance FlashTrace) at runtime. But, again, these tools cannot see more than traces.

Is it possible to automate PDF compare process?

I am creating hundreds of reports monthly with InDesign and export as PDFs. What has been a pain in the A is that each month I need to manually check the PDFs to last months to see if anything changed, which mean I run pdf compare manually for all the reports. Is there a way I can bulk compare all the reports to last months or have it automated into a process so it does individual comparison automatically and just present the output as a result of comparison?

AFAIK, it's not possible to do that with Acrobat.

Is it possible to automate JDE with QTP ?

Similar Messages

Maybe you are looking for