Is it possible to broadcast to QSS only when web page is load?

My set-up will have a Quicktime broadcaster at one location and QSS at another location. A web page on the server will show the live picture coming from the broadcaster. Does the Broadcaster has to feed QSS all the time or only while somebody access the web page on the QSS.
My problem is during night time, few people will access the page and I want to limit the upstream from the broadcaster to the QSS.
Any help would be appreciate. Thank you
Franco
PB G4, Mac Mini, iMac G4, 8500, IICX, Apple IIe, Newton Mac OS X (10.4.5)

I like having the sounds, alerts, banners and badges, I just don't think I should have to keep them constantly running in the background in-order to get them.
You don't have to do that. Apps don't "run" in the background on iOS to provide notifications. Only a select few apps do anything in the background (such as audio players, GPS apps, VOIP apps) and even then it is the OS that provides the notifications or keeps the audio playing - not the app - the app itself is frozen in memory (and removed from memory completely if the OS needs to free up some RAM).
I've been up for about 4 hours and my phone has dropped from 83% to 16%
Yes, that's almost certainly one of the many negative side effects of jailbreaking. Read: http://support.apple.com/kb/HT3743
Unfortunately, as you've jailbroken your phone, we can't provide you with any further help as we have no idea what unauthorized modifications you have made to the OS to make it function differently.

Similar Messages

Not only do web pages not load properly but we're doing calculus on-line and only 1 video can be viewed at a time. last week we didn't have problem. wish i could call someone. not getting any help.

a number of site say done and we see a blank page. on-line calculus class, last week could view more than 1 video at a time now only 1 can be viewed. this course need to be completed by may 3. career builders some of the drop downs aren't working. need to find a job. these are serious errors that we did not experience before. we haven't updated to 4.0. now i see the one's who have are having these problems. daughter can't gt to e-mail. wish i could talk to someone. i'm going to try the live session at 2 but i'm not a techy. can take care of most problems, but this seems beyond me. HELP
s

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

Every time I use safari on my macbook pro with retina display, only half the page will load then it freezes up?

Every time I use safari on my macbook pro with retina display, only half the page will load then it freezes up? It's brand new, so I don't understand why it would be doing this?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Dead pixel only when using Pages

One dead pixel. Always the same one, only when using Pages. Has anyone else seen this?
MacBook Air 11", 1.6 GHz Core i5 CPU, OS 10.8, Pages 4.2

This has been happening to me ever since I upgraded to Mountain Lion. Certainly a software issue, I expected an update to iWork to resolve this after the release of 10.8 but it seems Apple have all but forgotten about their iWork suite...
Below are images of the effected area when a Pages window is selected and unselected.
OS X 10.8.2 - Pages 4.3 - Mid 2011 2.3 GHz Mac Mini - 23" Apple Cinema Display (Old Alu, not that it matters)

I want to set up Firefox to only allow certain pages to load - how do I do this?

My children are having my old laptop and I dont want them to be able to 'stumble' across anything unsuitable.
How can I set up Firefox so that it only allows pages to load from websites I choose?
Thanx!

See:
* https://support.mozilla.com/kb/Parental+controls
* http://kb.mozillazine.org/Parental_controls

How to open only one web page at a time?

I used to have it set so when I opened a new web page, the previous one closed. Now, nothing closes automatically and I have about 50 pages open that I have to close. How do I set it so that only one page opens at a time?

HI Janice,
You can use a keyboard shortcut to close all windows in Safari. CommandShiftW.
To close one window, Command + W.
Carolyn

Page number to get displayed only when the page count is more than 1

Hi Gurus,
My requirement is to print page numbers ONLY if the page count is more than 1 ,i.e. if the data getting displayed in 1 page only then don't print "Page n of m" but if it is getting displayed in more than 1 page then display "Page n of m" on TOP right corner.
I selected "Page n of m" and it creates 3 fields in object hierarchy i.e TextField CurrentPage, TextField PageCount and Static Text field Pages.
I go to the ready:layout of PageCount object, and use below script:
this.rawValue = xfa.layout.pageCount();
if (this.rawValue == 1) {
this.parent.Pages.presence = "invisible";
I looked at the message Page number not to display but it doesnot resolve my problem.
Please help me out.
Regards
Ajay

Hello Ajay,
Script do not work for TextFields. to get the page numbers displayed. Select Text field from library and Go to Object Pallete, Value tab and select "Calculated - Read Only" in Type and choose Runtime property. There you can find the Number of Pages.
Once this is the text field, you can write script on it.
If(this.rawValue == 1)
this.presence = "invisible"
similarly write script for total number of pages, but make sure that variable is accessed properly.
Please let me know, if you still see some issues with it.
Thanks,
Rakesh

I do not want the Firefox update page to load. I want only the Home page to load.

When i first access the internet through Firefox, I get both the Firefox update page and my
requested Home page. I am unable to only get the Homepage even though this is the
setting in my control panel.
Basically i am getting two tabs at startup and only want the one.

[[Firefox says it's just updated every time it starts - how to fix]]

Is it possible to run an applet inside a web page using JDeveloper?

Have they got around to that yet?
Owen Brandon

Not sure who "they" are?
Yes, it's possible. Did you try googling "jdeveloper applet?"
You'd find [url http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3?topic=run_p_applet_html]this if you do...
Regards,
john

ODI Commit of Headers only when Lines data is loaded successfully

We have a requirement where in we have two interfaces ( headers & lines).
We have to commit data in Headars table only if the lines table gets successfully polulated.We have customized the KM's to remove commit from the headers interface and removed the ddl statements from IKM and LKM which usually do autocommit.We tried commiting the data after the lines interface execution , but that's not working. Though in ODI it displays single session for all executions(header and line), internally it is creating sub sessions.
We are using IKM Oracle Incremental Update-Merge knowledge module.
Execution steps are Procedure 1 --> Procedure 2 --> Headers Interface --> Lines Interface --> Procedure 3 --> Procedure 4.
Kindly provide your inputs.Looking forward to your suggestions.

Anand,
My approach would be different. Essentially your requirement indicates that you need to run DML on header and details table within same transaction cycle. Because for each interface execution, agent makes a separate connection, it is hard to design that into two different interfaces. My approach would be to accommodate both targets into single interface using a special LKM. Below is the procedure in short:
1. Create a data model by adding columns on header table and details table together.
2. Design an interface and put this model as target.
3. Bring the usual sources in the source pain and establish joins
4. Create the mapping for header table and mark them as UD1 in addition to mark them as INSERT or UPDATE as required.
5. Create the mapping for header table and mark them as UD2 (not UD1) in addition to mark them as INSERT or UPDATE as required.
6. All mapping are to be executed in staging.
7. Create a special IKM to include two I$ tables (I$_target_table_1 and I$_target_table_2) using the columns used for UD1 and UD2 mapping respectively. Populate them. To know how to use UD1 and UD2 mappings, look at manual for the documentation of odiRef.getColumnList api.
8. Add two options in the IKM where header and detail table names can be specified.
9. In a trasaction cycle (say, transaction1), insert into header table. In the next step into details table. Commit in the next step. In that way, if insert to details was not successful, job will fail and ODI would terminate the connection without a commit.
If you want to use two interface still, you have to find a way to run both interfaces asynchronously and then the IKM used in the interface for header table should be modified in such a way that after insert it must wait for some kind of communication (in the form of table data or temporary file) to mark the commit. My best guess would be to use jython in the IKM to check for the file. Off course interface writing to detail tables must be sending similar communications at the end of a successful write. If you do not want to use Jython, my advise would be to use PL/SQL procedure (try looking into DBMS_PIPE or DBMS_ALERT, I do not have ready code) to arrange for such a notification. But this is one hell of an extra work and the logic has multiple points of failure that requires still extra work.

Battery Issue. I only have an hour worth of battery life at 86% with minimal background lighting and only one web page open.

I currently have a macbook pro with about 130 charge cycles that was purchased in August 2012. After about an hour unplugged with no activity only an hour and 54 minutes remain w/ 86% battery. According to coconut battery the battery health is at 85%. Should I bring the macbook into the apple store? Earlier today I lost 20% of my battery life in 20 minutes with only word open. I recalibrated the battery as well and I havent had any improvement.

purchased in August 2012.
I recalibrated the battery
Your model Macbook does not need calibrating according to article - Calibrating a portable computer battery
Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure. These computers use batteries that should be replaced only by an Apple Authorized Service Provider.
MacBook Pro (13-inch, Mid 2009) and later
MacBook Pro (15-inch, Mid 2009) and later
MacBook Pro (17-inch, Early 2009) and later
MBP Battery Troubleshooting:
To check for a bad battery, go to Apple/About This Mac/More Info
In the System Profiler window, select the Power entry & look for Health Information.
If next to Condition it says "Check Battery" then your battery is probably on the fritz.

Firefox (only!) web page downloads pdf instead of showing page.

When I go to foccl.com and view books>new>or on order Firefox 3.16 w Mac OSX 10.6.6 downloads the page instead of showing it. Safari and chrome both show the page.
On Windows 7, this page shows as intended.
Any ideas?

See:
*https://addons.mozilla.org/firefox/addon/7518 Firefox PDF Plugin for Mac OS X

Only one web pages is slow - on another pc on same lan it opens fast

Hi,
Am running Firefox 29.0.1 on a Windows 7 pc. One particular web pages takes over a minute to load. On the same LAN I have another pc running Firefox 29.0 on Ubuntu (Linux) and it opens the same web page in a matter of seconds.
On the Windows 7 pc I have cleared the cache, cleared cookies but still the one page gives problems.
Web pages is http://www.stuff.co.nz
Any ideas to fix the problem would be very much appreciated.

[[Firefox is slow - How to make it faster]]
# Open the History on the computer that is slow.
# Search for all of the pages with that domain name.
# Delete them
# Reload the page.
Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Let us know if this solves the issues you are having.

I have a Lexmark Z705 printer. When I click Properties on the printer dialogue box i get error message "Prop Res DLL not loaded." This only for web pages using Firefox.

no more to add

Copy '''LXBCPRP.DLL''' to the following location: '''C:\WINDOWS\system32\spool\drivers\w32x86\3 '''
See also: http://support.microsoft.com/kb/918730

Showing a jwindow only when the image is loaded

Hi,
excuse me for the simplicity of my question, but I'm a beginner..
I want to show a jwindow for few seconds opening my program. This jwindows has a jpanel with an image. The problem is that, when the jwindow is showed, the image isn't loaded and one sees the empty jwindow. Can I wait that the image has been loaded to show the jwindow?
The image is setted by a
Image i=Toolkit.getDefaultToolkit().getImage("img\\icon.gif");
g.drawImage(i, 10,10, null);
in paintComponent of my JPanel.
Thanks in advance!

Don't know if this will solve you problem or not but the easiest way to display an image is to simply use a JLabel:
JLabel label = new JLabel( new ImageIcon(....) );

Is it possible to broadcast to QSS only when web page is load?

Similar Messages

Maybe you are looking for