Is it possible to build a menu as my 1st page and navigate back to it?

I am building a rather long form and would like to have a menu (TOC) as the first page so the user can go right to the desired section.  I would then like to be able to use the Navigate to Page to allow the user to return to the Menu if they want to, or navigate using the PREV and NEXT buttons.  The Navigate to Page only allows forward skipping.  Is my only option to build my menu using html and embed the form code?

Hi,
>> I would then like to be able to use the Navigate to Page to allow the user to return to the Menu if they want to,
This is not something that we support right now.  As you indicated, the Navigate to Page is for foward pages, not backward.
>> navigate using the PREV and NEXT buttons
I am not sure if I understand this correctly.  You can always use the PREV button to get back to the previous page and as you go back, you will reach the first page, which in this case your TOC.  We currently do not support going back to a specific page in one PREV click.
>> Is my only option to build my menu using html and embed the form code?
Navigate to Page for backward pages is not supported in embedded form.  Are you trying to build different forms for each item of your TOC?
Thanks,
Lucia

Similar Messages

  • Good Bye Version 1.0.3 build 16 -- How do I uninstall everything and go back to previous version?

    Good Bye Version 1.0.3 build 16 -- How do I uninstall everything and go back to the previous version?
    Okay, I found the prior version of DesktopManager for Mac in one of my old backups from March of this year.  The new 1.0.3 dmg has an uninstaller next to the installer.  I am going to remove 1.0.3. from all of my computers, and install the prior version, and set the preferences for do NOT (NEVER!!!) upgrade / update!

    So -- did it work? I've heard people have gone back to the previous version and mysteriously, the syncing problems followed along, even though they weren't there before v. 1.0.3.
    BTW, where do you find the uninstall piece on the application? I looked for it once and didn't find it where I thought it would be.

  • PDF button menu id from PO Page  ?

    HI ALL Experts,
    i want to know about pdf button menu id from PO From ,
    any body know then please give me solution ASAP .
    Thanks and Regards
    Kalpen

    HI nj
    I create one addon for Send Po Layout in pdf .
    so i want to click this menu button  from my page and i pass parameter PO Docnum ,
    then i want to this PO layout attach my Form and send this PDF Layout to client
    its possible ???
    Thanks
    Kalpen

  • Is it possible to build pop-up menu on nav bar in a template??

    Is it possible to build pop-up menu on nav bar in a
    template??
    There is anybody who built pop-up menu on nav bar in a
    template, made changes to the pop-up menu and successfully updated
    the pop-up menu in all files that are generated from the template?
    I wanted to do this, but failed. So, I would appreciate your tips
    if you have done that successfully.

    I have. It's so troublesome, awkward, and arcane, I don't
    suggest anyone
    use these menus.
    You might be interested in what the programmer who adapted
    this code for
    Macromedia has to say about these menus -
    http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
    There are much better ways -
    Check the uberlink and MacFly tutorials at PVII -
    http://www.projectseven.com/
    and the Navbar tutorial/articles at Thierry's place
    http://tjkdesign.com/articles/dropdown/
    Or this one (more recent article):
    http://tjkdesign.com/articles/Pure_CSS_Dropdown_Menus.asp
    Or to get it done fast, go here -
    http://www.projectseven.com/tutorials/navigation/auto_hide/index.htm
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "lakeleman" <[email protected]> wrote in
    message
    news:eqqp1t$pjn$[email protected]..
    >
    Is it possible to build pop-up menu on nav bar in a
    template??
    >
    > There is anybody who built pop-up menu on nav bar in a
    template, made
    > changes
    > to the pop-up menu and successfully updated the pop-up
    menu in all files
    > that
    > are generated from the template? I wanted to do this,
    but failed. So, I
    > would
    > appreciate your tips if you have done that successfully.
    >

  • Is it possible to have a menu with just one button highlight when someone rolls over it?

    is it possible to have a menu with just one button highlight when someone rolls over it? if so how would you do it as i tried doing an invissble button but it didn't work?

    Get yourself a copy of Total Training for Encore DVD 1.5 by Daniel Brown.  This exact scenerio was explained in section 4) Building Menu and
    section 7) Advanced techniques.
    I refer to Dan's video time & time again.  It's from 2004 but he's still right on the mark regarding the generation of every aspect of creating a DVD.
    They now offer their entire online.
    www.totaltraining.com
    Good luck

  • Not possible to scroll the menu without lagging - Set Up a Repair service is not working

    Hi,
    It is not possible to scroll the menu without lagging.
    The latest version has been restored but nothing.
    I think the touch screen is having some problems.
    I wanted to use the Set Up a Repair / Send In for service but it seems that the application form doesn't working.
    As soon as push the Continue button, nothing happens.
    Is there anybody from Apple who can check this issue please?
    Thank You.
    Anmary

    Restoring a phone from a backup will put the device back to the state it was when the backup took place, i.e. all info that you had on that phone before using the backup will be gone.
    You could try to restore the phone, which will back up the actual data on the phone, including the passcode, and use this backup to set up a new phone with. The passcode will still be the same, because it is  part of the backup.
    More info here, iPhone and iPod touch: Wrong passcode results in red disabled screen
    Not being able to fill in the passcode is not much different from forgetting it.
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Also have a look at this one: iTunes: About iOS backups

  • Is it possible to create a menu structure within iWeb with a so called tree layout? iWeb only provides automatically a horizontal layout

    Is it possible to create a menu structure within iWeb with a so called tree layout? iWeb only provides automatically a horizontal layout

    Not in iWeb itself.
    You have to create these menus yourself. Start here :
         A List Apart: Articles: Suckerfish Dropdowns
    Also, see podcast episode 9 of
         CSS Tricks and Tips
    and then add them to a webpage with the HTML Snippet.
    Or add the menu to the webpage with a JavaScript.
    Here's a sample page :
         http://www.wyodor.net/mfi/roodhout/
         http://www.wyodor.net/mfi/spelling/
         http://www.wyodor.net/mfi/Maaskant/Some_Menus.html
    The how-to-do page are here and here.
    More sample pages on my Made for iPad with iWeb pages.
         http://www.wyodor.net/mfi/
    You may have to learn HTML, CSS, JavaScript, AJAX, DOM and how iWeb creates its pages.

  • Encore no longer behaving when building a menu.  Help!

    I have creative suite 5 for iMac.  Premiere works fine but when I want to build a menu in Encore and try to put Text into it, it announces a “General Error“ or "sorry an abnormal condition has been detected” and the screen goes “mad”.  I’d be grateful for any help!

    My guess is that you have a scope problem. By putting the button inside a movieclip you have made the buttons scope the same as that clip.
    So if you add a trace inside the release event handler, what do you get?
    trace("My current scope is: "+this);
    I'm guessing it is "_level0.mc_anim_backdrops_menu," right?
    So since you are using the global function of gotoAndPlay() it is looking for that label in the current timeline and not finding it.
    You should probably use the MovieClip method and specifiy which timeline it should look in.
    _root.gotoAndPlay("Why");
    _level0.gotoAndPlay("Why")
    _parent.gotoAndPlay("Why");
    both would probably work. I would never use the first two, other than to make sure that there wasn't something else going on...

  • Is it possible to build a project with Labview 2010 on a Windows XP system, that is useful for a system with windows 7 on it?

    Hi there,
    I am planning to use Labview 2010 in a short time.
    But before I'm going to use it I have some questions.
    I know it is possible to run Labview 2010 in an XP environment. But is it also possible to, when running Labview 2010 on a XP system, to build a project to a version that is useful in a Windows 7 environment?
    Or do I have to run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?
    Please give me some information.
    I hope to hear from one of you soon.
    Regards,
    Kenny
    Solved!
    Go to Solution.

    Is it possible to build a project with Labview 2009 on a Windows XP system, that is useful for a system with windows 7 on it?
    Thanks.
    Philippe B.
    Certified Associate Developer / Dépt Moyens d'essais
    www.ingenia-system.com

  • Build a Menu Framework problems

    i am trying to setup the menu framework application found on oracle articles http://www.oracle.com/technology/oramag/oracle/06-may/o36apex.html
    but i have found an error on the step 5
    "Step 5: Add Applications to the Menu
    Before you can add applications to the menu, you must open the application in Oracle Application Express and subscribe to the menu framework application's authentication and authorization schemes.
    Subscribe to the menu framework's authentication scheme. In the Application Builder, click the application you want to add to the menu system:
    1. Click Shared Components.
    2. Click Authentication Schemes.
    3. Click Create.
    4. Click the As a copy of an existing authentication scheme button, and click Next.
    5. Select NNN Menu Framework from the Copy from Application list, and click Next. "
    And that with all existing authentication scheme i wanted to try
    « ORA-00907: missing right parenthesis »
    i thing that the errrot isn't on Menu Framework but maybe on HTMLDB
    can you help me with trying this and tell me how i can do
    hanks for all

    what version are you using?

  • Is it possible to build a binary working on solaris 8 from solaris 10

    Hi
    I understand that my requirement is kinda weird. However, I really wonder whether it is possible sometimes.
    I have built ssh successfully both on solaris 8 and solaris 10. Now the problem is the binary built on solaris 8 can work on solaris 10, but the binary built on solaris 10 can not work on solaris 8.
    The problem is SUNW_1.2.2 can not be found on solaris 8.
    $ldd sshd
            libresolv.so.2 =>        /usr/lib/libresolv.so.2
            librt.so.1 =>    /usr/lib/librt.so.1
            libsocket.so.1 =>        /usr/lib/libsocket.so.1
            libnsl.so.1 =>   /usr/lib/libnsl.so.1
            libc.so.1 =>     /usr/lib/libc.so.1
            libc.so.1 (SUNW_1.22) =>         (version not found)
            libdl.so.1 =>    /usr/lib/libdl.so.1
            libaio.so.1 =>   /usr/lib/libaio.so.1
            libmp.so.2 =>    /usr/lib/libmp.so.2
            /usr/platform/SUNW,Sun-Fire-V210/lib/libc_psr.so.1After more detailed investigation, I found the system-call dlopen and so on are linked to SUNW_1.2.2
    objdump -T sshd|grep SUNW_1.22
    00251240      DF *UND*  00000000  SUNW_1.22   dlerror
    00251510      DF *UND*  00000000  SUNW_1.22   dlclose
    00251738      DF *UND*  00000000  SUNW_1.22   dlopen
    0025181c      DF *UND*  00000000  SUNW_1.22   dlsym
    00251a98      DF *UND*  00000100  SUNW_1.22   unsetenvBut for the binary built on solaris 8, system-call dlopen is provided by SISCD_2.3.
    objdump -T sshd|grep dl      
    0023f160      DF *UND*  00000008  SISCD_2.3   dlopen
    0023f16c      DF *UND*  00000008  SISCD_2.3   dlclose
    0023f274      DF *UND*  00000008  SISCD_2.3   dlerror
    0023f8d4      DF *UND*  00000008  SISCD_2.3   dlsymAs sshd from solaris 8 is working on solaris 10, I think SISCD2.3 is also available on Solaris10. So is it possible to build ssh (any special link option?) with SISCD_2.3 rather than SUNW_1.2.2?

    Yuechen wrote:
    Hi
    I understand that my requirement is kinda weird. However, I really wonder whether it is possible sometimes.
    I have built ssh successfully both on solaris 8 and solaris 10. Now the problem is the binary built on solaris 8 can work on solaris 10, but the binary built on solaris 10 can not work on solaris 8.That is expected. Binaries should have forward compatibility and run on later versions of the OS.
    Build on 8, run on 8 through 10.
    Darren

  • Feature Request: Build Favourites Menu based on Directory Structure

    Hi
    SQL developer is really a very nice tool and even for DBAs. I would like to request a feature in this tool which would a good value to this tool and usability. Most of us have our own scripts which we keep on using to perform day to day activities, Can we have a feature which builds a menu based on the directory structure like one of the popular tools Benthic Software's "Golden" does? It would really be a very good feature to have.
    I love sql developer tool already..
    regards

    Better support for file based development is being working on for our 1.1 release.
    -kris

  • Is it possible to build a German keyboard in an MacBook Pro in US?

    Hey Guys,
    I'm thinking about buying a MacBook Pro. I have lots of german friends and they use a different keyboard.
    I looked at the online store but I could not find, how to build a german keyboard in the MacBook and I really would like to have a german keyboard in my MacBook Pro.
    Do you know something about it or is it possible?
    Thanks for helping
    An4stasia

    What you can do is set the keys to German layout in preferences and then get something like this
    http://www.kbcovers.com/servlet/Detail?no=218

  • Is it possible to make a menu in idvd. i like the possibility for example in the beginning of the dvd of two ours in the menu at the beginning van the dvd and between the scenes of the movie. thanks

    is it possible ta make a menu in idvd. I like different menu with linking to scenes in the movie. for example in a movie of two ours in the menu at the beginning of the movie so you can chose with part of the movie you wil play.  thank you for tips  (holland)

    djinte wrote:
    is it possible ta make a menu in idvd. ...
    iDVD has its own forum, here:
    https://discussions.apple.com/community/ilife/idvd
    what you're looking for is 'chapters', don't hesitate to make use of iM & iDVD's built-in Help.
    btw: no need to write extra-large ...

  • Is it possible to build a firewall using labview??

    Is it possible to build a firewall using labview??
    RAJESH

    There are several kinds of firewalls, for example:
    (1) so called "personal firewall software" which applies some policies to incoming and outgoing ethernet traffic on the computer it is running.
    (2) Dedicated hardware firewalls (having at least two ethernet interfaces) that enforce policies of traffic flowing across. These can be bridging, routing, or even be proxying.
    LabVIEW does NOT have access to the low level packet structure (ethernet header, ip header, tcp header, etc.) and relies on the OS for routing decisions. LabVIEW only deals with TCP and UDP and only at a very high level. A firewall must also make decisions for e.g. ICMP, GRE, or other IP packets, must know the status of all TCP flags (SYN, ACK, URG, PSH, FIN, RST), must check for valid fragmentations, et., etc.. LabVIEW cannot do any typical firewall tasks unless you do most of your work with external routines. In this case, LabVIEW just provides the UI.
    (Even simple ftp traffic would be quite complicated. For example the ports for the secondary data connections must be dynamically allowed based on information gleaned from the control connection, in this particular case the PORT command and the reply to the PASV command).
    I would say the answer is NO! Not with the networking tools provided with LabVIEW alone.
    With lots of work, you might be able to built a simple proxy server using LabVIEW, but this would seem quite useless...
    LabVIEW Champion . Do more with less code and in less time .

Maybe you are looking for