Is it possible to burn a DVD of the exact slideshow made from an Event?

I would like to burn a full resolution DVD from the slide show on iPhoto complete with transitions & music

Share menu -> Send to iDVD
Regards
TD

Similar Messages

  • Lion is going to be available via app store for download. Will it be possible to burn a dvd image from that?, Lion is going to be available via app store for download. Will it be possible to burn a dvd image from that?

    Lion is going to be available via app store for download. Will it be possible to burn a dvd image from that?, Lion is going to be available via app store for download. Will it be possible to burn a dvd image from that?

    Possibly.  See this Web page.
    By the way, you seem to have been misled by the poor field labeling of this forum software into trying to type your entire post into the "subject" field.  Next time you might want to type just a short summary of your post into that field.

  • I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

    I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

    It's also under the File menu.

  • On my Mac (vers 10.7.5) I use Disk Utilites to burn a DVD. The DVD won't play on the Mac but will play on my Windows PC and on a DVD player. A DVD created on my PC will play on the Mac. Any ideas why this is happening?

    On my Mac (vers 10.7.5) I use Disk Utilites to burn a DVD. The DVD won't play on my Mac but will play on my Windows PC and on a DVD player. A DVD created on my PC will play on the Mac. Any ideas why this is happening?

    I used iDVD to create an IMG file
    You created the video DVD, the IMG file, with iDVD and just burned it with Disk Utility. As Klaus1 pointed out Disk Utility can't create video DVDs.
    OT

  • Burning a DVD after the update

    Trying to burn a DVD after the update.   Selecting DVD as the destination.  But no matter whether I select "automatic" or "single layer" the software keeps requesting dual-layer media.   I really don't want to do that.  Any solutions other than Compressor?

    Having to finish the project... I exported using Compressor and everything worked fine.  But I still can't for the life of me figure out why FCP X in the DVD destination continues to demand dual media....

  • How do I burn a dvd using the PAL setting for Europe?

    This is an older answer:
    Make a new project in PAL using custom settings. Copy and paste the contents from the NTSC project to the PAL project. Render everything.
    Don't do this unless you really need to. If you're making a DVD for Europe you don't need to.
    And my question is:
    Why is it not needed to change it to PAL if this DVD is for Europe?
    Would it not be best to use a project with PAL SD 720x576 DV Anamorphic  25i  ?
    What's the difference between .... x756 DV  and  ... DV Anamorphic
    and also completely without this DV and DV Anamorphic?

    Level 10(109,395 points)Tom WolskyJan 9, 2015 5:22 PM
    Re: How do I burn a dvd using the PAL setting?in response to Totti 10Why is it not needed to change it to PAL if this DVD is for Europe?
    You don't, unless you want to have PAL resolution. Would it not be best to use a project with PAL SD 720x576 DV Anamorphic  25i  ?
    Yes, if you want a PAL resolution DVD. That's why the OP is asking how to make a PAL project. What's the difference between .... x756 DV  and  ... DV Anamorphic
    DV is 4:3. DV Anamorphic is 16:9. and also completely without this DV and DV Anamorphic?
    Not sure what this means. The DVD specification is the same as DV resolution. If the OP as an HD project that has a frame rate of 23.98, the output resolution will be NTSC DV anamorphic, because DVD only accepts 23.98, 24, or 29.97 frame rates in 720x480, not in the PAL resolution 720x576. That has to be in 25fps.
    Like Show 0 Likes(0)
    Reply
    JUst to add the reason you don't need to make PAL for Europe is because all PAL DVDs can play back NTSC. Unfortunately almost no NTSC players can play back PAL.

  • Is it possible to burn multiple uncompress tracks onto an audio cd from Logic pro?

    Is it possible to burn multiple uncompress tracks onto an audio cd from Logic pro?

    Hi,
    Create a play list that you wish to burn. Select playlist, the file from main menu which gives to an option to burn the playlist. A pop up box appears allowing you to select burn speed and disc format.
    Jim

  • Burning two DVDs at the same time

    Hi guys,
    I've just bought a new MacPro with two super drives.
    Do you know how to burn two copies of the project at the same time
    using DVD Studio Pro?
    Thanks in advance!
    gogiangigo
    DVD Studio Pro 4.2   Mac OS X (10.4.10)  
      Mac OS X (10.4.10)  

    Welcome to the boards
    You cannot burn two DVDs at the same time from DVD SP though if you build the project you can tyr other approaches
    http://discussions.apple.com/thread.jspa?messageID=4557443

  • Is it possible to burn 1 dvd project onto 2 dvd's at the same time?

    Is it possible to burn 1 idvd project onto 2 different discs at the same time. i have an external burner so that wont be a problem i am just wondering if it is possible to burn both at the same time

    You can't do it out of iDVD.
    If you create a disk image file (.img) out of iDVD you MIGHT be able to do so using Roxio's Toast and the .img file.
    http://forums.support.roxio.com/topic/70423-burn-to-multiple-drives-from-one-ima ge/page__p__355967__hl__multiple+drives__fromsearch__1#entry355967

  • Idvd: once a project is burned to dvd disc the resolution is very poor.

    I have created a project in idvd with several sub menues and images. Once I burn the project to dvd disc the resolution is very very poor. Besides the images being very pixelated, the menu screens are just as bad(pixelated), so it's not just an image quality issue. The funny thing is, when idvd is open (in the editing mode) and I play the project, everything is crystal clear. Then I burn the project, and play it in my computer to verify and the quality is terrible for both, my images and the menu and sup menues. I did import my (hi-res, average of 5mb) images into iphoto, then pulled them in to idvd from iphoto. I used a supplied template, but did change the positioning and font of the text on the menu and sub-menues. I have chosen the encoding to be 'best quality' rather than 'best performance' under the idvd preferences menu. There has to be something else I can do to get a great quality with this program.
    Thanks!
    MacBook Pro   Mac OS X (10.4.10)  

    The funny thing is, when idvd is open (in the editing mode) and I play the project, everything is crystal clear.
    iDVD's Preview function can and will lie to you. Use apple's dvd player as a more accurate indicator of what the final image (or rather disc image) will look like.
    Additinal recommendations: Use best performance for QT content 1 hr. or less and not best quality setting. This may help somewhat. Also make a disc image first from the file menu in iDVD6 and then lower the burn speed to 4x or lower in apple's disc utilities or roxio toast. Use only Verbatim or Maxell DVD-R for troubleshooting purposes only.
    Lastly, when shooting on minidv camcorders make sure not to pan too quickly. Avoid sudden movements. Use a tripod whenever possible. Make sure your subject is in focus and well lit. Use new / quality minidv tapes only.

  • Error-29, Cannot burn a DVD or save a disc image from within FCPX using Mountain Lion

    Really stumped on this one.
    Running Mountain Lion, freshly downloaded version of FCPX, on a 2009 MacPro with 16 G RAM.
    Trying to share a 4 minute movie I edited.
    - No problem exporting as a quicktime move...worked fine
    - Big problem trying to either burn a DVD, save a disc image, or export to an Apple device.
    The progress bar gets about 90% complete, and then it stops and a message window comes up that says:
    There was an error burning your disc. The operation couldn't be completed. (DSPPublishing error-29)
    Thoughts?

    From Crash Analyzer:
    DSPPublishing error -29 (Final Cut Pro X)
    This error can occur when burning a disc if your menu has incompatible assets.
    Suggested Actions
    If your menu has a background image, make sure the image is not too large. Try reducing the size of the image and saving it as a JPEG or PNG.
    Report generated by Crash Analyzer in Pro Maintenance Tools

  • Purchased desktop Feb 2012 and did not come with iDHow do you burn a DVD of your finished pIed video from iMovie edit project?

    Purchased desktop Feb. 2012; it did not come with iDVD. How do you burn a DVD from your finished product in iMovie edit project?

    See Why is there no iDVD on my new Mac? and How to create a video-DVD? (Macs without iDVD)

  • Burning a DVD with m4v music videos purchased from iTunes

    Instead of buying Apple TV, I would like to burn a DVD with my collection of music videos purchased on iTunes. Most of them are Protected MPEG-4 video files, having the extension .m4v
    My question what I need to do to burn a DVD with these files, without loosing the quality and maintaining the video's aspect ratio? I don't mind to upgrade my iDVD programme to the version of 2008 and QuickTime to the version of Pro, if that will help to resolve my problem. Currently iDVD 6 does not support the protected m4v files, hence I can't burn them into a DVD for watching on TV screen. Your advice is highly appreciated.

    This is from the Terms of Service page for iTunes. The bottom line is that you can't burn the videos to DVD.
    10. Purchase or Rental of Apple Content
    Usage Rules
    Your use of the Products is conditioned upon your prior acceptance of the terms of this Agreement.
    (I edited out the sections that do not pertain to your question.)
    (vi) You shall not be entitled to burn video Products or ring tone Products.
    The complete document can be found at http://www.apple.com/legal/itunes/us/service.html. If you live in a country other that the United States, you will have to get the document that applies to you.
    Message was edited by: Glo H

  • DVD PRO burning a dvd without a menu after compressing from fcp7

    I editing my project using FCP7 then compressed it using best quality DVD 90 min in Compressor and now I am try to burn dvd's using DVD PRO. I am trying to make a dvd with no menu-I just want to be able to hit play and have the dvd play without any graphics on a menu in the beginning. I am trying to import using DVD PRO does not work. I have also tried to export using Compressor-does not work. I keep getting a warning box popping up that says there is trouble in the files or not a compatible file from compressor. I do not understand how that could be since I compressed it using compressor-do not get it. Thanks.

    DVDs use an MPEG-2 codec, so regardless of which codec FCP uses to compress the Quicktime file, it will end up as MPEG-2 when you burn to DVD. So as long as the video preview plays in iDVD, you should be fine just using the "Best Quality" setting.
    If you are really concerned about the quality, you can also try exporting the video using Compressor and authoring the DVD in DVD Studio Pro. It's a bit more complicated, but the results are worth learning the software.
    Hope this helps.

  • Burning to dvd and the loss of file size

    I am new to aperture and in trying to burn my photos to dvd (with toast 6 or idvd), I have a couple of questions. First, can I just drag and drop the images or do I need to export them? Secondly, when I have dragged and dropped photos into the Toast screen the file size is considerably smaller (about one fifth the size). Am I just dragging the preview? It seems when I export a photo to my desktop it is also then a smaller file size. (one third or so) How to I burn to dvd select full size versions of my photos?
    Thank you for any help.

    hello, lupita
    Welcome to the Aperture forum!
    I am new to aperture and in trying to burn my photos
    to dvd (with toast 6 or idvd), I have a couple of
    questions. First, can I just drag and drop the
    images or do I need to export them?
    if you have made Aperture Previews (if not Update the Version Previews first that you want to drag & drop) you can drag & drop them into the drop zone of iDVD from the Browser (it takes a while for iDVD Media option to see the Previews while they Update)
    or you can access your photos through the Media/Photos/Aperture Library option in iDVD
    or you can export Versions to a folder on a hard drive and iDVD/File/Import/Image
    Secondly, when I
    have dragged and dropped photos into the Toast screen
    the file size is considerably smaller (about one
    fifth the size). Am I just dragging the preview?
    yes.
    It
    seems when I export a photo to my desktop it is also
    then a smaller file size.
    Exporting a photograph (Version) from Aperture can have several size and quality options, since you want your photos to be the same size then make sure the Versions are not being resized which it sounds like they have been. Select & edit the Presets/Image Presets... for Export
    or, Export the Version and at the window prompt select the Export Preset: Edit to modify the presets to your liking.
    How to
    I burn to dvd select full size versions of my
    photos?
    Export Version/Edit/Export Preset/ now select file type TIFF or JPEG or PSD you want "Original Size" etc.
    At the Export window select the DVD/CD so the files go into it
    REF:
    http://docs.info.apple.com/article.html?artnum=304499
    victor

Maybe you are looking for