Is it possible to bypass the internal dac?

can i get a digital output , bypassing the internal dac like you can with an iphone?

That's nice but (1) as I said the camera connection kit doesn't work with the Nano and (2) according to your blog iOS 7.x or later is required for it to work. The iPod Nano does not run iOS.

Similar Messages

I've lost the use of Appleworks in 10.9.2. Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other?

I've lost the use of Appleworks by upgrading to 10.9.2.
Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other? I'd like to be able to boot to the older OS when I need Appleworks and few other applications that aren't available on OS 10.9.2.
Any suggestions?
Thank you for your help.

Hello again, WZZZ,
Here's an update. I was successful in creating two partitions on my internal drive, and in installing OS 10.6.6 on the second partition, as per your guidence. I now have it up to 10.6.8 with all the security updates and AppleWorks. A great thing.
Some thoughts:
• The partitioning had one hitch; it failed at first. But once I "repaired" the disc with Disc Utility the partitioning went thru.
• The partitioning took a long time in 'resizing the partition.' A few hours I think it was. Lots of progress bar watching.
• If I had it to do again, I'd size the two partitions differently. My original data was occupying about 230 Gb of the 320 Gb disc. I made the new partitions share the space, about 230 and 75Gb. That left very little available space for the main disc. I ought to have put some breathing room in there. As it is, it's an incentive to clean up all those files, especially all those iTunes files. I now have about 10% of available space there and mean to continue deleting.
So, all in all a good project that got me where I wanted to go. Thank you for your help.
Appreciatively,
wallah

Is it possible to upgrade the internal Hard disk drive on the iMac

Is it possible to upgrade the internal Hard disk drive on the iMac?

Yes but it's definitely not advised. If you have a machine newer than 2009 Apple uses drives that have integrated heat sensors. This makes upgrading much more difficult but not impossible. If you have a machine still under warranty then definitely DO NOT do this yourself as you may void the warranty not to mention it isn't for the faint of heart. Take the machine to an AASP to have the work done, you will need to find one in your area willing to do so.
If you are considering a new machine then simply buy the configuation you need.

Is it possible to replace the internal wifi antenna in a itouch 1st gen with a stronger internal wifi antenna from a slightly newer model, such as a 2nd or 3rd gen itouch?

Is it possible to replace the internal wifi antenna in a itouch 1st gen with a much stronger internal wifi antenna from a slightly newer model, such as a 2nd or 3rd generation itouch?

That is not very likely as the antennae are different physical designs and fit will be an issue.

Is there a way to trace an IPOD even if it is Jailbroken.... how is it possible to bypass the ICloud Lost feature in the device? third time my 64 gb iPod touch gets stolen.

Is there a way to trace an IPOD even if it is Jailbroken.... how is it possible to bypass the ICloud Lost feature in the device? third time my 64 gb iPod touch gets stolen.

If it is off or not connected to wi-fi, then you cannot track it.

Is it possible to bypass the Reports Launch Form

The question is not if it is possible to bypass the Launch Form, but
1. is it possible to pass parameters (arguments) to fill out the parameters from another form.
2. Assuming the answer to Q1 is Yes, is it possible to automatically launch the report if all parameters has been filled in?
+ken

Hi , is it possible to upgrade the internal flash storage capacity of mac book air ?

hi , is it possible to upgrade the internal flash storage capacity of mac book air ?

Yes, it is , however its very costly, and you should consider storing static media files on an external HD.
OWC sells SSD upgrades for your Air.

Is it possible to increase the internal hard drive capacity of my 500GB time capsule?

I have a 500GB time capsule bought 2008. I am now backing up two laptops to it, a macbook pro and a macbook. It is likely that soon their combined data will outstrip the capacity of the time capsule. (I increased the internal hard drive capacity on the macbook recently to 640GB).
Is it possible to add to the internal hard drive capacity of the time capsule? If so, do I just source extra capacity from a third party supplier as I did for the new hard drive for the macbook?
Any experience or advice appreciated.

It's possible to pull the hard drive from the Time Capsule case and replace it with a larger capacity drive, but you might want to keep in mind that since Time Machine will "see" this as a "new" drive, it will make a complete backup of both computers to start and then backup incrementally after that.
If you were thinking of transferring the existing data on the 500 GB drive, that is possible as well.
But, you will not be able to tell Time Machine to simply continue backups to those same files. For that reason, it might make sense to look for a separate drive enclosure to install the "old" drive in case you need access to your older Time Machine backups.
After a few months, you may decide that you really don't need all the old Time Machine backups on the old driive and you may decide to simply erase the drive and use it as a spare.

Is it possible to bypass the Default rules in a task?

Hello,
looking at a article on the internet on how to configure PO Release workflow. I configured my system( IDES) to create new PO Release workflow accordingly.
I am able to create a new PO and based on the configuration the Release strategy is displayed in the PO screen.
The STD PO RELEASE workflow WS20000075 provided by SAP is is activated and agent assignment is done in the configuration.
So as soon a PO is created the workflow is triggered and the workflow errors out. It does not send any workitem to the recipient. I tried to diagnose the workflow and the issue is with the default rule which gets triggered to determine a AGENT. The default rule triggers the FM ME_REL_GET_RESPONSIBLE
to determine the agents and it is not able to determine the agent.
Any idea what is missing or how to bypass the default rule defined in a std task?
Regards
Chky

Hi Imthiaz,
I implemented the OSS Note and deteted the entry in SWEC as suggested in the OSS Note. But after deleting, The event is not raised at all. I did a comparison of SWEL trace before and after deleting the record.
Anyways i put back the SWEC i deleted from the system. When i tried to dig further in the issue i realized that when i check the trace in SWEL it gives me a error message
Import container contains errors (are any obligatory elements missing?)
Then i checked back to see if all the Bindings are fine from Workflow to Task and From Task to the default Rule and all seems to be fine.
Not sure why still i am getting the error as mentioned above.
Also I tried to Test the workflow from SWDD transaction and passed the PO number and the Release code in the testing. The workflow Error's out. When i check the workflow log it just stops at the first step.
Any idea what next i should try?
Anyways thanks for your help. Appreciate that !!
Cheers
Chky

Is it possible to bypass the "Album" in a display of photos?

In other words, I want to use the structure of the Albums hierarchy (group of photos ina an album) but skip the page where you see all the pictures and go straight to the zoomed in page.
I'd like to go from this page:
http://web.me.com/jennlabelle/Monteleone/PORTFOLIO/PORTFOLIO.html
directly to these pages (when you click the stack of pix on the page above):
http://web.me.com/jennlabelle/Monteleone/PORTFOLIO/Pages/BUILT-INS.html#0
or
http://web.me.com/jennlabelle/Monteleone/PORTFOLIO/Pages/KITCHENS.html#0
so, I'd like to bypass these pages:
http://web.me.com/jennlabelle/Monteleone/PORTFOLIO/Pages/BUILT-INS.html
or
http://web.me.com/jennlabelle/Monteleone/PORTFOLIO/Pages/KITCHENS.html#grid
SInce I can't easilly make the stack of pix into a hyperlink, not sure how to do this.
Thanks in adavance!
Jenn

see my old post:
https://discussions.apple.com/message/6272619?messageID=6272619#6272619?messageI D=6272619

Is it yet possible to upgrade the internal hard drive on a 13" Macbook Pro with Retina Display?

Hi all,
I have a MacBook Pro (Retina, 13-inch, Mid 2014) with a 2.6 GHz Intel Core i5 processor, a 8 GB 1600 MHz DDR3 memory and a 128GB built in flash storage drive.
I do a lot of video and sound work requiring a lot of space however 128GB is just not enough. When purchasing the MacBook I was hopeful that the built in drive could possibly be upgraded to at least 512GB of storage. I have read many blogs and forums suggesting that there is work being made on a replaceable drive however I have not seen any evidence of this being confirmed. Could someone possibly let me know if this is yet possible as I would urgently like to upgrade if so.
Many thanks
Silecta

For direction on how to upgrade SSD, read https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Retina+Display+Mid+2014+SSD+Rep lacement/27849

Is it possible to bypass the interactive report

Hi -
Is there a way to skip the interactive report and go directly to page 2 of my application if the report only returns one row?
Thanks,
Matt

user1055564 wrote:
Could you give me an example?I can't give you an example because I haven't actually done this, and we're trying to establish connectivity for my new project (no Apex connectivity yet).
I'm thinking of something like having region item that's populated by a query, probably the count you are lookng for. The region header might have some JavaScript code looking at the count value as a substitution variable or text value you assign and possibly perform a redirect based on that value as set up in the page header.

Is it possible to have the internal timebase as an output signal on a analog out chan in NI 6251

It's all.... thanks!

Hi! It is possible!
If you look in MAX your device's routes (open device and interfaces, select your board and choose the "Device Route" tab on the right part of the screen) you'll find all direct connections between terminals (green ones) and indirect connection (hovering your mouse on the cell that connects your source and your destination you'll see the sub-system used to route the signal).
With this being said, using labview you can create a new connection with "DAQmx Connect Terminals.vi" (all functions-->Ni Measurement-->DAQmx-->DAQmx Advanced-->DAQmx Signal Routing), using C functions you can call DAQmxConnectTerms ( int32 DAQmxConnectTerms (const char sourceTerminal[], const char destinationTerminal[], int32 signalModifiers) ).
Hope this helps
Ciao.
NicolaC
National Instruments
Attachments:
connect.JPG ‏47 KB

Any possibility of bypassing the EU volume limit?

I am (now) well aware of the countless posts on the EU volume limit, but what individuals may lack in power make up for it in number through the continuous probing on this matter.
Just to lay out the story, I have lived in Asia for the past 20 years, and during that time I have owned 2 iPods; a 40GB iPod Photo and a 30GB iPod Video. I recently moved to Italy to partake in a year's study abroad as part of my degree program in Australia, and sadly, shortly after arriving here, my iPod video died. So I naturally decided in replacing the iPod Video with a new iPod. I made my order through Amazon Italy, as it was cheaper buying a new one online than buying it from the Apple shop in Rome. The iPod had arrived last Friday (11th) and I finally synced it Sunday night.
To my surprise, after syncing my iPod, I was presented with what I now know as the EU volume limit, which I must say is the most annoying introduction to the iPod. I fail to believe why people should be subject to this ruling by the various policy makers in Europe when it should be a person's own prerogative to the volume they want to use for their audio enjoyment, regardless of whether it is deafening or not.
I hope a solution can be found, because I don'tt properly enjoy most of my music any more without having the bother of background noise being so noticeable. I use my iPod at a higher volume with headphones because I want a sense of isolation; not necessarily to go deaf, but so I can at least enjoy my music without having to hear background noise as well as filtering out disturbances so I can focus on my thoughts better. With the volume limit, it's just not enjoyable any more.
Message was edited by: euggal

Meg St._Clair wrote:
Asking the question again is not going to get a different answer. Sorry.
True, I wasn't expecting a new answer, as I pretty much guessed that the chances of that were nil by seeing how other posts of a similar topic had developed.
But I was actually wondering if there might have been any news on this gopod program I've read about? Apparently they've stopped support after gen 3/4? Anyone have any information on this? There website seems to be just a single page with no news or anything.
And you also mentioned amps, are there any that you could possibly recommend?
I was considering on possibly requesting for a reimbursement from Amazon, as this information on the EU volume limit was not disclosed in the product description. For someone like me who wasn't aware of this before purchasing, it certainly was an unwelcoming surprise to find it. That way, I'll see if I can acquire an iPod from a region which doesn't have the limiter implemented.
And thank you for your quick response, I appreciate it.
Message was edited by: euggal

Is it possible to bypass the Album sorting sequence...

Need to list alphabetically all selections of a given artist without grouping by album...
I.e., 5 albums by a given artist with a combined alpha listing of all selections within the 5...not affected by album name...

Hmmm not sure how you could create a smart playlist that included all artists and then put their songs alphabetically within the artist grouping. You can either alphabetize by artist or by song name, but not really both.
To include all the artists (or anything in a playlist you want to include all of) you can do that by making a negative rule that is true for all of them. For example, if you want all the artists, then simply create a rule like "All Artists that are not AAAAAAAA" which will be all of them (except of course if you actually have an artist called AAAAAAAA").
But I think you can build a playlist of what you want in a normal (not-smart) play list and build it up manually. Create your final playlist first, which starts empty. Now click on the Name column in your library to sort the library by song names. Open the browser and use the search box and type in the first artist you want to put in the playlist. Say U2. Select U2 when the Artist browser list narrows down and you see it. Now all the songs shown below are just U2 songs in song order. Select All and drag and drop those into your playlist. Repeat for the next artist, select all, drag and drop into the playlist.
I don't have iTunes in front of me at the moment, but I think that should load the playlist up the way you want, all songs grouped by artist and the song within the artist subsection in alphabetical order.
Patrick

Is it possible to bypass the internal dac?

Similar Messages

Maybe you are looking for