Is it possible to call a BSP on custom Tab created in different BSP

Hi Group,
   i created a custom tab: ZIBASE in CRMM_ACCOUNTS. where i have to integrate "CRMM_PRD_IOBJECT" BSP. is it possible to load this BSP whenever i click on ZIBASE Tab?
  1) IF it is please let me know the steps i need to take.
  2) If not let me know if i can atleast bring up this BSP: "CRMM_PRD_IOBJECT" in different window by clicking on a custom button in CRMM_ACCOUNTS.
Please help me resolve this.
Anu.

Hi Anu,
  I try to explain clear:
1 - Check if you have Navigation Link to IVIEW with application CRMM_PRD_IOBJECT.
2 - If you havent it. Create one.
     - Create a method : SPRO->CRM->Layout of User Interface (People-Centric UI)->Navigation (URL Generation)->Define Method for Navigation.
     - Assing the method with your object type SPRO->CRM->Layout of User Interface (People-Centric UI)->Navigation (URL Generation)->Method for Object Type (Navigation)
Assing the priority
Assing implemention type: S Bsp external (Depending of your requirements)
Assing application: CRMM_PRD_IOBJECT
Assing view
Assing ID Page/Service: Value of variable PCD of your iview
     - Assing the method with your crm roles. SPRO->CRM->Layout of User Interface (People-Centric UI)->Navigation (URL Generation)->Assign Object Method to Role
3- Your ZIBASE tab has a event. With the name of your event go to SPRO->CRM->Layout of User Interface (People-Centric UI)->Application Element->Event
     - Assing the object, method and the field( with guid of your b.object(product)).
Regards.
Manuel

Similar Messages

  • GP public API: is it possible to call that using BSP

    Hi
    if we dont want to involve NWDI development,  is it possible to call those GP public APIs using BSP?
    any tutorial avaiable?
    thanks and best regards.
    Jun

    Hi Jun,
    The GP Public APIs are Java APIs and without NWDI/NWDS, it is not possible to use them. It is not possible to call them from the ABAP Side.
    However, it is possible to start a GP Procedures via Web Service. That might help you if you want to start a Guided Procedures from a BSP. But the display of the runtime might be  a problem since it is not possible to jump from a BSP to a portal page. At least, I don't know how if it is possible.
    Hope this helps.
    Best regards,
    David

  • IP - Is it possible to call exit planning function from ABAP Report..

    Hi All,
    Greetings.
    Is it possible to call exit planning function from ABAP Report (t-code SE38) ? Or I mean is not limited only to be called from ABAP Report, perhaps from BSP / Web-Dynpro / Function Module.
    If somebody here has been doing it before, I'm keen to ask to kindly share it. Particularly how to call and transfer data to that exit function.
    Or if somebody has done in BPS, appreciate if it can be shared too .
    Thanks a lot and have a good day,
    Best regards,
    Daniel N.

    Hi.
    You can achive this as suggested by Mattias in your previous post.
    Lets say you have next data structure:
    CostCenter | Amount | PercentForDistibution |
    Create input ready query in this format. Restrict cost center by variable type range.
    Create WAD with analysis item.
    When you run web page you enter range of cost centers (lets say you will enter 101004 to 101010).
    I assume you have data only for 101004 in your cube (lets say 1000).
    You will see only one record in your webpage.
    CostCenter | Amount | PercentForDistibution |
    101004       | 1000     | NOTHING
    When you create WAD in analysis item properties set "NUMBER_OF_NEW_LINES" to lets say 1 (so in WAD you will see always one blank line for entering new data).
    Just add 6 new records:
    CostCenter | Amount   | PercentForDistibution |
    101005       | NOTHING| 10
    101006       | NOTHING| 30
    101007       | NOTHING| 20
    101008       | NOTHING| 25
    101009       | NOTHING| 5
    101010       | NOTHING| 10
    Then run planning FOX function like this:
    FOREACH Z_COST_CENTER.
    IF {Amount, Z_COST_CENTER} <> 0
    Z_AMNT_TO_DISTRIBUTE = {Amount, Z_COST_CENTER}.
    ENDIF.
    ENDFOR.
    FOREACH Z_COST_CENTER.
    IF {PercentForDistibution Z_COST_CENTER} <> 0.
    {Amount, Z_COST_CENTER} = Z_AMNT_TO_DISTRIBUTE * {PercentForDistibution Z_COST_CENTER}.
    ENDIF.
    ENDFOR.
    It is not perfect FOX, but as an idead, it should work.
    Regards.

  • Calling a BSP application on a Web-Dynpro screen

    Hi all,
    We have a requirement as below:
    In the SAP Standard Web-Dynpro screen we have a Tab-strip control, where there are 2 tabs.
    We need to enhance the tab-strip control and add a new tab. On the same tab we need to call a BSP application.
    It meas when we select the tab we should be able to see a specific BSP Application there.
    How can this be made possible?
    One way that I can think of is by creating the Service calls... However, I am not sure how can the service call can be created and used to call a BSP App to be displayed on the screen.
    Waiting for your replies.
    Regards,
    Kunjal Patel

    Hi Thomas,
    Thanks for the reply. It was quite helpful in analyzing the available options for the development.
    Now, with the further analysis from your inputs, following are the findings:
    1. BSP is a Stateful BSP.
    2. Yes, We are using this web-dynpro in the portal. How can we go about with the alternative way suggested by you about the iView? As i have very limited knowledge about the Portal hence a little more help from you will be helpful.
    Is it like we can provide a button on the screen and then when a user clicks the button the result is a new window of the browser with the given portal link?
    Please suggest.
    Regards,
    Kunjal Patel

  • Is it possible to call the Print Quote functionality from Custom ADF page

    Hi,
    We are researching if it is possible to call the Print Quote functionality from the Custom ADF application.
    Goal is to pop up the PDF report upon clicking the Print Quote button on the custom page. Is it possible ?
    Atleast advice on the direction to go forward is appreciated.
    Thanks
    Sai

    Hi ,
    Please check following thread on forum -
    Re: ADF: Calling OAF Page from ADF page
    Check this may also be useful-
    https://blogs.oracle.com/shay/entry/to_adf_or_oaf_or
    I have not tried yet but Steven Chan (Sr. Director OATG) suggest following methodolgy for this-
    https://blogs.oracle.com/stevenChan/entry/appsdatasource_jaas_ebs
    Thanks,
    Ashish

  • Is it possible to call ms-dos command in abap program?

    Hi,
    is it possible to call ms-dos command in abap program?
    Thanks.

    Hi Cemil,
    You probably have your answer here:
    [Re: DOS/Windows command in app server;
    You create your external command with SM69 (you can test it with SM49).
    Then you call this command with function module "SXPG_COMMAND_EXECUTE".
    (See function group SXPT for all the calls to external commands).
    Regards,
    Thomas

  • Is it possible to call a adobe form inside a function module?

    Hi gurus,
    i am trying to generate the pdf data source inside a custom function module,
    the function module will call the FUNCTION 'FP_JOB_OPEN' , then call the function module of the pdf interface. then get the pdf data back and return.
    but at run time i got the error message:
    FPRUNX101, the job already started.
    then the program stopped.
    i checked the service market place, there is a note for that:858325 Message "Job already started" when you display PDF forms .
    according to the notes,it seems that it's only possible to call the pdf generated function module in a program.
    my question is , is there a way to call that in a funciton module?
    best regards.
    Jun
    the note states that:
    Reason and Prerequisites
    At runtime, a PDF-based form is called using a generated function module. If you use the new interface, it is necessary to set the function modules FP_JOB_OPEN and FP_JOB_CLOSE as control structures with one or several generated function modules. In order for the single test from Transaction SFP to work simultaneously, however, the system checks for the test environment of Transaction SE37 (in which the test ultimately runs) in the single test. In this case, the function modules FP_JOB_OPEN or FP_JOB_CLOSE are called automatically.
    If you then test a function module that calls a PDF based form and therefore calls the function module FP_JOB_OPEN itself, this leads to the error message mentioned above.
    Solution
    The test should be carried out using a program that in turn calls the function module to be tested.

    sorry, i found out the reason.
    the fm can not test direct in se37, it should be wrapped by a program.
    br.
    zj

  • Is it possible to call a VI that is inside a LabVIEW executable from a TestStand sequence?

    I have created a custom TestStand operator interface and have modified the default sequential process model to display a UUT information dialog that prompts for more information than just the UUT serial number.  This UUT information dialog is a LabVIEW VI.  To distribute the operator interface, I build it into an executable.  As part of the build process, I make a copy of the UUT information dialog VI (which is part of my operator interface project) and place it in the same folder as the executable.  I have then configured the sequential process model to call the dialog VI from this location.  It would be really nice if I could embed the UUT information dialog VI inside the operator interface executable so that I could distribute just an executable instead of an executable and separate VIs.  Is this possible?  In other words, is it possible to call a VI that is inside a LabVIEW executable from a TestStand sequence just like a standard LabVIEW VI call?

    Ryan,
    The dialog that you've created isn't being directly called by the OI at all and shouldn't need to be included in the same directory as the OI for distribution. Since you are modifying the PreUUT of the default process model, you will give the path to the VI in that step, create a deployment and then manually copy the VI to the directory referenced in the step. The VI is considered a support file for the process model and is not related to the OI at all.
    Test Engineer - CTA

  • Is it possible to call a 9i Forms from a 6i Forms ?

    Hello,
    I have a customer using CRM 11.5.10.2 ( Database 9.2.0.6 / 6i Forms) and will be created a functionality in the CRM screen, where end user will call (via button) a custom application running on 9i Forms.
    Customer believes that there is a technical limitation to achieve that. That is, call a 9i Forms from a 6i Forms.
    Is it possible to call a 9i Forms from a 6i Forms ?
    Thank you in advanced for help,
    Marcos Souza.

    I should have thought so, as Forms 9i is exclusively web-driven, so how you launch the URL is immaterial as long as you use a supported browser. As your Forms 9i apps will invariably be on a remote web server, you'll not encounter compatibility issues either. And Forms 6 and 9 development is possible on the same PC using multiple Oracle Homes. Ask Oracle beforehand if you are still not convinced.

  • Is it possible to call custom designed RFC function module, apart from BAPI

    Hi Friends,
    1.     Is it possible to call custom designed RFC function module, apart from BAPI.
    2.     Why we call it Adaptive RFC layer, Since every time the JCO layer updated with SAP, Why can’t be dynamic.
    Thanx for Ur time.
    Cheers,
    Sam

    Also check <a href="http://help.sap.com/saphelp_nw04/helpdata/en/41/38bc8f813719488ddc9d9b21251ec3/frameset.htm">here</a> for more information on aRFC. Here you can find why it is called adaptive.
    Regards,
    Christophe

  • HT5071 Is it possible to call a locally installed ibook from a hyperlink? What about to a bookmark?

    Is it possible to call a locally installed ibook from a hyperlink? What about to a bookmarked page?
    I have 2 questions..
    1. Can I send a link via email that when launched will open an ibook that has already been downloaded to the bookshelf?
    2. If question 1 is possible, can I take it a step further and call a bookmark, i.e. chapter 3.
    Our company has it's own appstore and I want to send out links to sections of the ibooks using bookmarks or at the very least take them to the start of the ibook.
    I don't need to give them a link to install the ibook as they already have it installed.
    Any help would be much appreciated.
    Chris.

    That would be cool, but it's not possible. The ibook is not accessible by URL in the user's bookshelf.

  • Is it possible to call the contact number indicated in the cell?

    Hello! Tell me please, I want to move a lot of contacts in the electronic form and organize a list of contacts in Numbers. Is it convenient to use it on the iphone? Is it possible to call the contact number indicated in the cell? That is an example: name, contact, etc. A few columns. I click on the number of human cell, and then what would happen if a set of user (as it happens in the notes for example)?
    Sorry for my english.

    Your post is now in the iWork for iOS community. You should be able to get to it using the link in the email you receive with this message.
    Regards,
    Barry
    PS: Interesting that I received the notification of your post in Russian (except for the first and last words).
    Here's Googles translation of my reply above:
    Ваше сообщение в настоящее время в IWORK для IOS сообщества. Вы должны быть в состоянии добраться до него по ссылке в сообщении электронной почты вы получите с этим сообщением.
    С уважением,
    Барри

  • Is it possible to call a Web Application from OSB Business Service

    Hi,
    Is it possible to call a Web Application that has URL - http://host:port/parse.php using a business service in OSB?
    What I have seen is it is able to call the service but the data we are sending that is the string in the form of the URL encoded data is not going there. Any help would be appreciated.
    Regards,
    Anuj

    What I have seen is it is able to call the service but the data we are sending that is the string in the form of the URL encoded data is not going there. Any help would be appreciated.How did you configure your BS. My guess is some thing to do with what your BS is configured and what the Back-end is expecting? HTTP Get Vs HTTP Post
    Manoj

  • Is there a way to answer the 5c without swiping? It really is a pain and hard to do at times one handed. Maybe allow favorites to be answered with a click of the home button or possibly all calls with a home button push

    Is there a way to answer the 5c without swiping? It really is a pain and hard to do at times one handed. Maybe allow favorites to be answered with a click of the home button or possibly all calls with a home button push. First smart phone I have owned and the old flip phone was much easier to answer.....just press one button.

    Is there a way to answer the 5c without swiping? It really is a pain and hard to do at times one handed. Maybe allow favorites to be answered with a click of the home button or possibly all calls with a home button push. First smart phone I have owned and the old flip phone was much easier to answer.....just press one button.

  • Calling a BSP application in ABAP webdynpro

    Hi Friends,
    Is there any chance that i can call a BSP application from WEBDYNPRO.
    regards
    Nalinikanth.

    Hi Yashpal/ Pankaj,
    I have one question regarding this.
    The usage of the UI element link "link to URL" is pretty much understandable to call a stanalone application.
    Whereas the usage of suspend and resume plugs, how does it work for BSP applications? For two WD components we can connect the plugs and it works.
    As I do not know about BSP, does it have in/out plugs like WD components?
    If so how to create the navigation link for this.
    Please explain.
    Sankar.

Maybe you are looking for