Is it possible to change calculation schema in Purchase Info Record

Hello friends,
just one question. I have calculation schema assigned to PIR -> RM0002 ,can I changed it and how.
I have tried with assigning vendor to certain (other ) group that belongs to other calculation schema without success.
I hope you can help with ideas.
Thanks in advance I am waiting for feedback !!!

If you want to assign the diff schema for diff vendor than you have to create diff pricing procedure the reason is in the Pricing you are using Gross price condition PB00 which is assigned to RM0002.
so you need to create new supplement schema like RM0002 and then assigned to your Gross price condition and then assign to your main pricing procedure
Than create new schema group and assign that to vendor.
M/08 for pricing procedure
M/06 for condition.

Similar Messages

  • Pricing schema for purchase info records

    hi guys!
    does anyone knows either SAP standard got function to define pricing schema for PIR? if yes, can you please tell me how to set it up step by step?
    Thanks a lot,
    crystal.

    Hi,
    there is no separate pricing schema for reading info records.
    When creating PO, the system first searches for a purchasing                
    info record with the combination of vendor/material at purchasing           
    organization/plant level. If there is no such info record, the system       
    then search at purchasing organization level. If there is no such           
    info record here either, you must enter it manually.                                                                               
    If the purchasing info record exist, then valid conditions have             
    priority during price determination. If an info record does not             
    contain any conditions or invalid conditions, the system read from          
    last purchasing document in the info record and then suggest the price      
    from here. The price determined in this way are default values that         
    can be changed by the buyer if necessary.                                                                               
    You can save useful quotation data for a material in purchasing             
    info record. The info record can be created automatically by                
    setting the info update indicator during quotation maintenance              
    in the item detail.                                                                               
    Please first check is there any valid info record exist for this            
    material/vendor. You can always create/change/view it manually              
    via Ta ME11/ME12/Me13.                                                      
    Please read also the notes 392988, 456691.
    Regards,
    Edit

  • Mass change of text in purchase info record.

    Hi All,
    For purchasing info record, we have maintained copying rules to adopt text from material master.  In copying rule for info record, we have maintained Fixed indicator for material master text "Purchase Order Text."  The texts copied to info records from material master is having status fixed.
    The problem is, since text is having fixed indicator it is not copying to PO unless we make change or adopt it.  Now we do not know how many info record is having the text as fixed since in most PO's text is not getting copied. 
    Is there any way where we can make a mass change so that fixed indicator is removed. If LSMW, how can we know how many info records are having text as fixed indicator "*".  Or is there is some other way.
    Thanks

    Hi Alex
    You can change/ remove the "No material text' check box either by using a
    mass maintenance - transaction MASS,
    object type: BUS3003
    table: EINE
    give the Info record number/Pur org/info-category/ plant
    or using the batch input recording using LSMW.
    You can find the number entries of info-records having 'No Material text' using transaction SE16/SE16N with table EINE
    and select the 'NO Material text' with 'X: and hit number of entries..you will find it
    Thanks
    Sasi

  • Changing scale basis in purchase Info record

    Dear All
            In info record I want to change the scale basis from D: Quantity Base to G  formula based . But system is not allowing me to make the necessary changes .
            Can anybody let me know how to make it ?
    Abhijit Das

    Hi Abhijit,
    this can be done by changing the scale basis in pricing procedure , which is  Field is reflecting from Condition Type PB00 Only
    .if you Want to Change scale Basis from D to G. You Should change the m/06 Condition type -->Scales , there you have to Change the scale basis from D to  G.
    I hope it will help You...
    Thanks and Regards...
    R.R.Rao.

  • Mass Change Of Vendor Code in Purchasing Info Records

    Hi All,
    I have one query and I already search a lot for it but didn't find any specific solutions.
    I want to change a vendor code in around 1000 Purchasing Info Record, I had already tried for Mass Maintenance Through T. Code - MEMASSIN, But I found Vendor field in New Values as Grey Field.
    Is there any other way to mass change of Vendor in Purchasing Info Records.
    Why vendor field is showing me as a grey Field?
    Thanks In advance
    With Regards,
    Patanjali Bhagat

    Hi Govardhan,
    Pl correct me if i am wrong....EINA-RELIF field is to check and uncheck for regular vendor...It will not change the vendor ID...
    EINA-LIFNR...is the field to change vendor no.., but i can not see this field name is not there in the table...
    Still i think that we can not change the vendor id's once it is created for Info record...
    Pl correct me if am wrong.
    Uts

  • How to change the Qty Conversion on a Purchase Info Record.

    I am trying to change the Quantity Conversion for a particular Purchase Info Record as it is incorrect.  The inputs are greyed out on the Purchasing Organization1 Data Screen.   I have also gone to the Conditions screen and the Menu Selection is greyed out when I go to the Menu for EXTRAS->Conversion Factors.  The Conversion Factor has been changed at the Additional Data Screen of the Material Master.   Any help would be greatly apprectiated.  Thanks in Advance.

    I have solved this problem.    From the Condition Record I went to the Menu Path, GOTO->ADDITIONAL DATA.  From here I was able to go to the Conversion Factor and make the changes.

  • Change/modify  Purchase info records (EINE table)

    Hi,
    Could you pls help to in providing FM to change/modify purchase info record.
    I have tried to use FM - >  ME_UPDATE_INFORECORD
    and ME_DB_UPDATE_INFORECORDS. but, it's not working .
    Kindly advice.
    Regards,
    Bharat

    hi,
    try report <b>RM06IBI0</b> and read docu to that abap
    A.

  • Purchase Info Record Change (ME12) using BDC

    Hi All,
    We are trying to change the Purchase Info Records using BDCs. We have about 20 condition records to change. Not all condition records change all the time. How can we use page control to identify the particular condition records that we want to change.
    Thanks
    Hari

    Hi Krishna,
    The BDC that we are trying to build will have the changes. For ex: When we created the info record (using a BDC) we had 15 condition records. This is coming from an external source.
    Now, there has been a change in the pricing (outside the system). This is communicated from the external system. We need to pinpoint which condition types to update in SAP, based on the values in the external system through the BDC.
    Regards
    Hari

  • Changing Purchase Info Record

    Hi,
    I've  a requirement to update a Purchase info record with a new condition. Can any one suggest me a bapi or a FM to update an existing PIR with new condition.
    I've tried FMs : ME_DIRECT_INPUT_INFORECORD and ME_DB_UPDATE_INFORECORDS but found out that these FMs and mass change transaction MEMASSIN are helpful for updating Purch org data. & general data.
    I'll appreciate any help in this regard.

    Experts,
    request your kind suggestions on this. the requirement is urgent.

  • BAPI  for create/change purchase info record

    Hi All,
    Could any one suggest me the BAPI for the create/change purchase info record(ME11/ME12).
    Earliest can be appriciable.
    Regards
    Anil

    Hi,
         I did not get any bapi related to create/change purchase info. But i can give u list of purchase info . if u got revert back to me
    Reward if it is usefull..
    Bye.
    BAPI_INFORECORD_GETLIST

  • Change of Purchasing Info Records

    Hi Team,
    I have a requirement to change some values in existing purchasing info records. I was looking for a BAPI or a Function Module to do this and performed a search in SE37, but could not find any. Does anyone know about a BAPI or Function Module by which I can maintain a Purch. Info record? Thanks for your time.

    If you are looking to have the users maintain the PIR data,  you don't really need programming to do mass maintenance of PIRs.   I have found that the MEMASSIN transaction is very helpful when changing PIRs in mass.  Maybe this will work for you.
    Regards,
    RIch Heilman

  • Pricing not updated in Purchase Info Record using INFREC01. is it possible?

    Hi Gurus,
    I am using IDoc INFREC01 to create Purchase info record for material, but when I see in ME13 that PIR is created successfully but price is never updated, though I have populated field NETPR and EFFPR hence condition PB00 (basic pricing condition) not created.
    Is it possible to update only single pricing (basic price PB00) condition through INFREC01 ??? or should I use another BAPI or some standard report ...??.
    I am extending Pricing Conditions for Purchase inforec through seprate IDOC: COND_A01, but it could only do that if there is basic pricing condition i.e. PB00.
    Please advice.
    Thanks in advance.
    Robin

    HI,
    You can update pricing field for conditon type PB00, please use correct validity period.
    Even there are no basic Price condition PB00, you can add new condition types with existing types.
    Price vaue can depend on the pricing conditions that you have maintained.
    Thanks....

  • Is it possible to change settings in "Help System info"?

    Is it possible to change Photoshop settings by clicking on Help and then System info? Since there is the possibility to type and the OK-button, I just started wondering.

    All Help > System Info does is to report your system specifications so you can copy and paste them in the forums for troubleshooting purposes.
    You can choose what to highlight and copy, but it does not change anything in your system like editing a configuration file would.

  • BAPI for Sampling scheme and Quality Info Record in QM Module.

    Hi techies,
    I have a two object(Sampling Scheme,Quality info record)  for which i need a BAPI for uploading the data.
    Please tell me if any one knows.
    Richard.

    Vineeth,
    Usually, I wouldn't think the follow-up action would be an issue with system performance.  You say 7000 items, but do you mean 7000 UD's?  I.e. an inspection lot of 1000 units isn't unusual and that would be 7 inspection lots.  You've also now said that the program needs to look across plants for UD rejections and for notifications.  That is another level of complexity.
    While the UD follow-up action should still be able to handle that, I can't say it won't affect performance.  I was going to suggest you have it only run on certain UD codes, but since you now need to reveiw this across plants that might not work.
    What happens if my vendor/material is in a skip stage at plant A and Plant B opens a notification agains the vendor?  Since there is no UD, the follow-up action wouldn't run and change the DMR at plant A.
    If you need to look at a bunch of stuff, instead of the follow-up action, you may need to run a program in batch and have it run once an hour or every 10 minutes.  Depending on how you write it, it could be pretty efficient. 
    Craig

  • Delivery time calculation from purchase info records in MRP

    Hi experts.
    I am using MRP -manual reorder point planning . I have maintain the delivery lead time as 10 days . This material has a info-record for a vendor and a contract also. we maintain the delivery time for the supplier is 20 days in the info records. And a source list is also maintain for this material with reference to the contract and assigned as MRP relevant.
    We run  MRP of this material and create the PR directly.
    we run ME59N for automatic creation of PO also.
    what I see is the delivery time defined in the PR is consider as 10 days from the material master MRP view. But when we convert the PR to PO the delivery time is updated from the inforecord. but the delivery date in the PO line item is not update. It is showing the same delivery date as PR.
    Is it possible to update the delivery date bas eon the info record when we convert from PR to PO automatically?
    regards
    DP

    I don't know the answer to your question, but can point you in another direction; you can set the system up in such a way that already MRP (as per the way you have described that you work) will take into consideration the planned delivery from the Info record/Contract:
    In transaction OPPQ check the "Scheduling: Info Rec/Agreement" box!
    This will make MRP take the planned delivery time from the IR or Agreement, whenever the source (vendor) is identified during the MRP run.
    Regards,
    Mario

Maybe you are looking for

  • Can I create a full backup on google drive by moving my user folders to Google Drive Folder?

    Can I create a full backup on google drive? Google suggested I simply move my folders (Pictures, Music, Downloads, Documents, etc) into the google drive folder. But these seem to be automated files involved with Mac's organization... will this create

  • Best way to create Math-Book for several devices

    Hello, I have written some Books about Mathematics and past months I rewrote the first one directly in iBooks Author - My original files have been written in WinWord 15 years ago, so there was only plain text, I could copy/paste into iBooks Author. T

  • Why is the layout viewed on Google Chrome different from IE and Firefox?

    I am using Windows 7 Pro, I have the latest updates for IE 9, Firefox and Chrome. On the landing page (Home), Chrome shows one of my "boxes" that I created with MUSE (the box to the right that says "Check out other services we offer!) extended about

  • IDVD hangs up in "creating your DVD"

    I just got a new iMac and am using the latest iDVD version to write a short video I shot (only 14 minutes long) as a test. It has two simple chapter marks. The iMovie encodes well and I send it to iDVD. It asks for a disk (I am using DVD-R) then the

  • Fusion OTL and EBS Payroll - Integration

    Hi I have a client who currently has EBS for OTL and Payroll, and is thinking about moving OTL to the cloud (along with other HR modules). They are unable to move Payroll to cloud at the moment because Australian legislation is not yet available in F