Is it possible to change online 'voice' on the Mac?

Is there any software or hardware that can convert voices while streaming into a real-time role-playing web environment? E.g. female>male, male>female, etc?
As far as software goes there seems to be a lot available for Windows, but nothing for Mac that I have seen. PCs seem superior when it comes to voice issues (for example Dragon is PC-only and yet its the best by miles). Is voice conversion another poor relation? Do I need to buy a PC to do this?
Does anyone have any ideas? I would prefer a hardware solution that I could plug a headset into, but software I would also consider. After all, it should be easy enough - it's just a matter of altering the pitch up or down, while reducing or increasing bass frequencies at the same time. Something a schoolkid could design, but I don't know where to even look for it, so any help would be appreciated.
iMac G5 17" 1.5Gb RAM   Mac OS X (10.4.9)  

Maybe I wasn't quite clear enough?
I'm talking about streaming voice chat into online environments such as World Of Warfare or Second Life. I want to convert my own voice (from a headset, say) through a piece of hardware, or software, that will take my voice, process it, and output it as an audio stream. I DON'T want it output to a file (as Djay does for instance), I want it as an uninterrupted stream - my voice as input, the processed voice as output - with maybe a half-second delay to allow for the processing.
E.g. I want to change my voice from male to female? Or vice versa?
iMac G5 17" 1.5Gb RAM   Mac OS X (10.4.9)  

Similar Messages

  • Is it possible to use 2 displays with the mac mini

    is it possible to use 2 displays with the mac mini

    I wanted an extended desktop using 2 monitors.
    I am using a Dell Ultrasharp ( has 1 VGA and 1 DVI-D) and a LG W2286 (has 2 HDMI, 1 DVI-D and 1 VGA)
    I ran into a similar issue where initially the mac would not detect the 2 displays and I thought I would share my solution.  I have a Mac Mini 10.8.2 i7 Late 2012.
    I bought a "Cable Matters" brand Mini Display Port | Thunderbolt to DVI Male Cable to have dual monitors.
    I am also using the included in the box  HDMI to DVI-D Adapter from Apple.
    Initial configuration was:
    Mini-Display (Thunderbolt connector) to DVI connected to the LG DVI-D input.
    Apple HDMI to DVI Dongle connected to the Dell DVI-D input.
    What happened was that my desktop was on the LG clear as day but OSX did not see the dell monitor.
    I called apple support and they could not figure out why the mini cant see the dell monitor. I think I discovered that the mac mini could not support 2 dvi monitors.
    I switched the monitor connections.
    The connections that works:
    HDMI out to HDMI in on the LG using a standard HDMI cable.
    Display port | Thunderport to DVI-D on the Dell's DVI-D in.

  • HT204370 Is it possible to change my purchase to the same cartoon, but with another spoken language?

    I bought the movie Cars for my kids on my apple tv. It was the english version, but I thought it was possible to change the spoken language to Danish. It wasn't. Now it seems I should have bought a different version of the film; the danish version. Is it possible to change my purchase?

    Is the Danosh version available in your country's store (what languages a film is in should be on its description page in the store) ? Purchases are considered, but you can try the 'report a problem' page to contact iTunes Support and see what they say (we are fellow users on here) : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Online streaming of the Mac screen and audio onto Apple TV

    I am aware of the possibility of streaming saved videos on the Apple TV but I was wondering whether it is possible to do it online: namely to have what happens on the mac to appear also on the tv. The objective is to view the Elgato tv on the tv screen connected to the Apple TV. So I would like to know if in any way iTunes may configured to do so or if there exists some third party software performing that.
    Thanks, Fabrizio

    That I knew. I was asking whether someone is working at a fix either at Apple or at some private developer's.

  • How can i change when i start the mac book pro, between mac and win?

    when i start the mac book pro, between mac and win?

    If you want to set which OS your system boots into (provided Windows is installed using BootCamp and not a virtualization option such as Parallels, Fusion, or VirtualBox), just hold the "Option" key down when you turn your computer on.  Continue to hold the key down until you see the options for booting into the OS of your choice.  Just click on the arrow under the one you wish (tap to click won't work here if you have it enabled... you'll need to physically click the trackpad).  If you want to change which OS your system normally boots into, just go into System Preferences in OS X and select "Starup Disk".  Whichever OS you select here will be the OS your system will automatically boot into.

  • Possible to change from CS3 Windows to Mac?

    I bought an imac recently, it has CS3 Master collection pre-installed (updatable and working as it should), it's just that it's the windows version and I'm running it through Parallels 3. Would it be possible that Adobe would allow me to change the version to a Mac version??? so i can run it from Leopard??
    I have contacted technical support about this 4 days ago, but are yet to reply.
    Thanks
    Adam.

    adam,
    I read their eBay Web page.
    >The software will come with a burnt copy of the disc as we have to keep the originals for future installations. These discs are provided with a serial code so you can re-install a new copy on that machine should the need arise.
    I'll be polite. These guys are out-and-out pirates -- they're actually admitting it! NO legitimate dealer does this B.S. story. If a legitimate dealer sells you or bundles software and installs it for you, they always give you the ORIGINAL factory disks, manuals or quick-start guides, serial numbers, and registration paperwork for you to file.
    Plain and simple, you were ripped off. No telling how many other unsuspecting folks (most likely Windows users) were robbed as well.
    My recommendation: Please report them immediately to eBay, to Adobe ([email protected]), and law enforcement in their UK jurisdiction. If they have a business license, they should have it revoked. And, by the way, be sure to get your money back.
    I'm telling you, if you call Adobe for the crossgrade, you're likely to be very unhappy with their response.
    The lesson here is: if a deal sounds too good to be true, it probably is.
    Neil

  • Is it possible to change image quality on the iPhone 4S?

    What's happened is that all images viewed on the phone used to have good quality to them (note not actual images taken by the camera but safari related) but something has changed and now they are small and poor. Have tried to research what it could be but have been unsuccessful.
    Can anyone help? Is it a possibility that settings on the phone have been changed somehow and if so how do I change them back?

    No Flash for iPads, iPhones, or iPods
    Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
    Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
    So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
    Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
    Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash.
    Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
    Apps that can display some Flash from the Web:
    Puffin
    SkyFire
    Photon Flash
    Browse2Go
    iSwifter
    Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that."

  • Since recent updates, I have noticed that my apps close automatically when I am distracted. In some cases it is time consuming to sign back in and get back to the task I was doing. Is it possible to change a setting so the apps will stay open?

    Since recent updates of iOS, I have noticed when using my iPad that my apps close automatically when I have to leave the room or am otherwise distracted for a few minutes. It is sometimes time consuming to sign back in and get back to the task where i left off. Is there a setting I can change so it will keep the apps open until I am ready to close them? Thanks for your help.

    Did you have this problem before Restoring you iPad?
    If you did then did you restore with a backup. You may have reinstalled something that is conflicting in this back up
    If not then sounds like either something went array with the clean install or a hardware issue.
    I know it's long winded but have you tired a clean install then downloading the apps again?
    PJRS

  • Is it possible to Change Directory structure once the project is developed?

    Hello,
    I am a Newbee to OAF development, I recently developed a JSP page using the oracle recommended directory structure "<companyname>.oracle.apps.<custom directory>." ie., for ex: "*xxcom*.oracle.apps.xxco.xxco_mapping.server", the page worked perfectly fine when I ran it from jDeveloper.
    but when I tried to deployed the same in the server to run from Oracle Applications, I found that our organization's unix directory structure where I need to deploy the files is not the same, they are excluding the "<companyname>" directory in there structure, the directory structure in unix looks like this "$JAVA_TOP.oracle.apps.<custom directory>...." ie., for example: "/u06/appsw/appdevcomn/java/oracle/apps/xxco", so now I cannot deploy the page I have developed.
    How do I resolve this issue? can I change the directory structure in jDeveloper now to match that on the server, ie., change it to "oracle.apps.xxco.xxco_mapping.server" instead of "*xxcom*.oracle.apps.xxco.xxco_mapping.server"
    Thanks

    Yes, it is called refactoring. PLease see the link below:
    http://jdeveloperfaq.blogspot.com/2010/04/faq-20-how-to-refactor-adf-components.html
    Kristofer Crus

  • Is it possible to get a virus on the Mac OS X v10.6.4 Snow Leopard?

    Hi, I was just wondering if it is possible to get viruses on the new system and I was also wondering if someone could give me some help/suggestions on what I should do about a problem I had with my iMac today. When I turned on my computer from sleep today a page popped up onto my iMac computer screen saying I had trojans and viruses on my computer. It also stated I needed to download software in order to fix the problem, luckily while I was in the middle of downloading this software I noticed that the page was not from apple but it was from the internet.. thankfully I cancelled the download just on time and none of the software downloaded... I am new to Mac and I'm now really paranoid that there is viruses on my computer.. should I be worried? What should I do? If anyone has any suggestions/advice/ or help to give to me on iMac computer's -viruses-protecting them etc..I would really appreciate it
    Thanks,
    kateos9

    These 'warnings' are usually pop-unders from a web page you've visited (i.e. they stay behind the page you're viewing so you don't see them until later).
    They claim to have scanned your computer and found viruses: this is complete rubbish and a scam - aimed really at Windows users (the details given are often applicable only to windows).
    You don't have any viruses: there are no Mac viruses in the wild. There are trojans and malware, but in all cases you have to actually install them (usually they try to make you think you are installing something else) and you would have had to give your admin password to do so.
    You were right to stop the download. Never ever download or click any links on anything of this nature. Unless you have specific anti-virus software installed (which would identify itself in any warning) no warning of this nature can be genuine: it's an attempt to get you to install malware, some of which can be very nasty.

  • Changing Icons (After reading the Mac 101 Topic)

    I'm trying to change icons on my hard drive. The problem lies in the icon in which I am going to replace the default icon with. When I go to the "Get Info" section of the icon, the image in the top left corner is the generic ".gif" file icon or the generic ".tif" file icon, instead of the actual image itself. Therefore, when I copy that file icon, it copies that generic ".gif" file icon onto the hard drive. But when I get info on other default mac icons (such as a folder), I see the folder icon in the top left corner.
    The crux of my question is: how do I have the actual image show up in the top left corner of the "Get Info" section of the icon?
    Thanks.
    Powerbook G4   Mac OS X (10.4.9)  

    You can either create an actual builtin thumbnail for the file, using an Automator action or a third party utility, or simply open the file in Preview and copy it there, then do GetInfo on the drive, select the wee little icon, and paste.
    Francine
    Francine
    Schwieder

  • How do i change my email on the mac

    This will not work for me. I have my icloud email set up... But i wanna change that.!

    You have to actually have another email account with a email provider. Whether that is your ISP or one of the free/paid email providers like Gmail, Yahoo, MS Outlook.

  • Is it possible to change voice back to female in voice over in ios5?

    recently upgraded ipad to iOS 5 from 4, my sister is blind and requires voice over to use ipad. but she can't stand the new voice so is it possible to change it back to the female from iOS 4 or downgrade to iOS4. Thanks

    recently upgraded ipad to iOS 5 from 4, my sister is blind and requires voice over to use ipad. but she can't stand the new voice so is it possible to change it back to the female from iOS 4 or downgrade to iOS4. Thanks

  • Can i change siri voice?

    Hello there, does any one know how to or if its possible to change siri voice?

    Unlocked iPhone 5s in the UK bought from Apple online. No such settling for changing the gender, the only way you can is by using 'American English' I have not seen this feature on any iPhones in the UK that friends have either on 5c or 5s.

  • Disk Utility: For one Disk it isn't possible to change anything

    Good Morning everybody
    First I think my Spec's are important:
    MacBook Pro (13-inch, Mid 2012)
    2.9 GHz Intel Core i7
    16 GB 1600 MHz DDR3
    Two Disks: Samsung SSD 840 EVO 250 GB (normal Startup Disk)
    Toshiba HDD 750 GB
    Intel Hd Graphics 4000 1024 MB
    OS X Yosemite Version 10.10.1
    And now to the thing I did that the Problem appeared:
    After a very long discussion with the Apple Support Help Hotline I decided that, after a Backup, I wil do this: OS X Mountain Lion: Erase and reinstall OS X to try something out, and then will restore my backup.
    It all went perfect till the thing with restoring my backup. In the Menu I get when I press (CMD + R) I tried to restore the backup. But then, in the middle of the process, the system cancelled the process automatically and shut down. So I started the Mac again, it automatically came into this CMD + R menu. So I went into the Disk Utility to watch what happened. Since then my two Disks are shown the same way (picture): It is not possible to change anything, except running the First Aid thing. Luckily it was possible to install the OS X and my Backup on the HDD, but for me this is only a temporarily version because the SSD is at the moment completely blocked.
    Goal:
    It would be great when I can add/remove/change partitions on both Hard Disks and when, at the end, it would be possible to install my Backup to the SSD and use the HDD as a "external Storage" again.
    Thanks for all your responses & you can ask me everything if you need more information.
    David

    This solved my problem.
    http://derflounder.wordpress.com/2013/06/29/erasing-a-filevault-2-encrypted-volu me/

Maybe you are looking for

  • PDFing Spot Colour Transparencies from Indesign CS2

    Hello!, I think this is a common question, but I can't find a definitive answer. I am trying to PDF a file which has an image and then a spot colour transparency over part of it. When I PDF the file at Press Quality the spot colour transparency is wh

  • Adding text to a photo

    i'm currently trying to make a simple cd cover using iPhoto to add to itunes. Is there any way i could add text to a photo that i have in the iPhoto library?

  • Trackable fields odn response message

    Hi, I've developed a routing service with both request and response message. Then I went on ESB console to configure Trackable Fields. When I try to set a Trackable Fiels on a response message the combo box "Message" lost the value, living a blank di

  • Reinstalling Oracle 10g

    Incidently, I had forgotten my oracle userid & password for my oracle. I had installed on to my laptop for my personal learning purpose. I uninstalled it and now when I planned on to reinstall oracle again, the install engine is crashing and I am not

  • NEF on photo trying to be imported intp Photoshop elements 5

    Tried to import recent photos taken into Adobe Photoshop Elements 5. 100 photos saying JPG were imported but 100 photos say the number of the picture and "NEF" and there is no photo. What has happened? Have I lost these photos. I am very new to digit