Is it possible to change positions of pages using Adobe X?

Is it possible to change positions of pages using Adobe X? I have a 4 page report that has page 4 where page 3 should be.

Can you advise what software I need to do this please?

Similar Messages

Updated, changed, adjusted, etc. pages using Adobe reader are not opening?

Information and/or Pages were not opening.
Tried to go through all steps of updating
Ended up with plugins, add-ons, all updated and inadvertently got Firefox 4 instead of 3.6
Things are not better
Believe it is Adobe Reader pages not opening
The pages are opening in Explorer
Have been wasting lots of time working on this for days
Also, Browser activity seems to be happening slower since these changes (like there are two systems fighting)

I checked for newer driver and the result is in attachment. I have a doubt my system has NVIDIA GeForce GT520MX already there. If I download GeForce 314.07 driver will it harm my system ? Pls.revert.

Is it possible to perform a photomerge Panorama using Adobe Photoshop Elements 13?

Is it possible to perform a photomerge Panorama using Adobe Photoshop Elements 13?

Barbara,
The step I was missing was to change the mode via the control button at the top of the user interface from "Quick" to "Expert". Under the "Quick" mode Photomerge Panorama is grayed out. Thank you for your input!

How to extract pages using adobe reader 11?

Hi Webmasters,
I want to extract pdf pages using adobe reader. Currently I am using version 11. Could anyone please advice on this?
Thanks
Srinath

Adobe Reader has no such functionality; you will need Acrobat for this.

Is it possible to change vehicle speed calculation using CAN

I can retrieve the speed using a PID but is it possible to change the calculation or coefficients of calculation for the speed equation?

Hi Robert,
Generally the CAN network is used for sharing information through out vehicles many systems. Some vehicles have reprogrammable controllers, "how" to do this is information that you would have to get from the vehicle manufacture, as they don't usually make that information public.
Scott M.
Applications Engineer
National Instruments

I have a new 64bit computer to which I have transferred all my files and re-installed all my programsWhen I try to print a page using Adobe Acrobat 9, Firefox crashes. This has never happened before, and does not happen with other browsers.

I have a new computer. I transferred all my data files and installed my programs. Now, when I try to print a page ti pdf using Adobe Acrobat 9, Firefox crashes, and Adobe hangs up.

Thanks for your reply cor-el. I had never heard of nor seen the pref network.http.max-connections until I read about it in some of the replies in this support forum. People were saying 256 was the old setting and a new setting of 48 would correct my problem. When I followed the instructions to get to - see - and change the setting I discovered that my network.http.max-connections was already set to 48. I never did this. The only way I can think of that this setting was changed is that it happened by an automatic update to my Firefox browser. So, the problem I have was probably happening while this setting was at 48 all along. It is still set at 48 and I am still having the same problem. I will try as you suggest and set it to 30 and see what happens. I'll let you know the results. That's again for your response.

How to crop pages using Adobe LiveCycle ES2 PDF Generator and Acrobat 9.2 Pro Extended

Hi all,
I'm evaluating the possibilities of Adobe LiveCycle ES2.0 PDF Generator in order to convert on the fly (programmatically) MS Office Documents and Visio drawings into PDF files.
I'm able to trigger this process using the Webservices API (from within C#). However when generating the PDF files in this way, each and every PDF file has a lot of white margins around it as it is generated as an 8x11 inch page.
I have been looking in ways to crop these white margins from around the information, so that the PDF content is only showing the actual content (in order to be used as an image).
I found a way of doing this manually by opening the generated PDF file of LiveCycle in Acrobat 9.2 Pro Extended and using the Document > Crop Pages... option.
So my question is: Can this be done programmatically using Adobe LiveCycle ES (and/or API functions of the Acrobat tool).
The envisioned solution would run on a server (without interaction/monitoring requirements by a human).
Any input about this is highly appreciated.
Kind Regards,
Raf
Raf Snijders

Hi all,
I'm evaluating the possibilities of Adobe LiveCycle ES2.0 PDF Generator in order to convert on the fly (programmatically) MS Office Documents and Visio drawings into PDF files.
I'm able to trigger this process using the Webservices API (from within C#). However when generating the PDF files in this way, each and every PDF file has a lot of white margins around it as it is generated as an 8x11 inch page.
I have been looking in ways to crop these white margins from around the information, so that the PDF content is only showing the actual content (in order to be used as an image).
I found a way of doing this manually by opening the generated PDF file of LiveCycle in Acrobat 9.2 Pro Extended and using the Document > Crop Pages... option.
So my question is: Can this be done programmatically using Adobe LiveCycle ES (and/or API functions of the Acrobat tool).
The envisioned solution would run on a server (without interaction/monitoring requirements by a human).
Any input about this is highly appreciated.
Kind Regards,
Raf
Raf Snijders

Is is possible to convert Chinese to English using Adobe ExportPDF?

I would like to convert Chinese documents in our company to English using Adobe ExportPDF. Is this possible?

HI Sheryl,
ExportPDF is not a translation service. What you're asking to do is not possible with ExportPDF.
-David

A page using Adobe Flash will not load in Foxfire. Have latest Foxfire and Adobe Flash downloaded. What now?

I am taking a class in Dreamweaver CS6. We created a page with a clip that uses Adobe Flash. The page renders like it should in I.E.10 but the clip doesn't even load in Firefox. I have downloaded the latest version of Firefox and Adobe Flash. Have 'reset' Foxfire. It still won't render correctly. Any suggestion of what I can try next?

This could be related to the HTML tags for the Flash media. If you use an <object> tag with a clsid, then Firefox will ignore it. Typically in that case, there is an <embed> tag within the object for browsers that do not use ActiveX.
If the page is online, you could provide a link so volunteers can take a look.

Is it possible to change the first page of a web application that was built using the UI?

Hello Community
    Using Sharepoint 2010 Server and the UI I built and application and would like
to continue building the web application using the UI.
    The application's first page was built using a Blank Site template and
the subsequent subsites were built using the Team Site template.
    In retrospect the first page should also have been built using a Team Site template.
    It may be unnecessary to make to delete the application
and create the first page as a Team Site and then have to create all of the
subsites (Team Sites) all over again.
    As a solution to prevent deleting the whole application and creating application
with all of the subsites all over again whether it is possible to do any of the
following:
    - Convert the Blank Site page into a Team Site page which would allow
me to leave all of the subsites as is.
    - rename the Blank site page which would in effect would be renaming the application
then create a new Team Site page which would be essentially creating a new application and
then adding all of the subsites contained in the renamed application that has the first page
as a Blank page.
    And if is possible to add, copy or move the subsites from existing sites to a new Team Site
page, how do you add, copy or move the subsites from one application to a diffent application?
    Thank you
    Shabeaut

Hi Shabeaut,
According to your description, my understanding is that you want to change the template of the root site without creating the susites in another web application.
I recommend to export all the existing subsites and import them to new web application.
More references:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/cc7c11ec-e4da-4ddb-babd-db76ccb35664/move-subsite-to-new-site-collection?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd321bac-16a7-47e4-842e-00b7ca0f7f05/move-subsite-to-other-site-collection-as-subsite?forum=sharepointadminprevious
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Is it possible to change the drafting standard used by Acrobat 9 Pro Extended?

Hi All,
I've seen some inconsistent behavior when converting CATIA V5R19 data to 3D PDF, specifically in regards to the appearance of PMI (3D dimensions, text, flag notes, etc)
It appears that Acrobat / Adobe 3D reviewer show 3D PMI according to ISO standards.(or some variation)
However, we use a variation on the ANSI standard for our drawings and 3D Models.
This results in a significantly different appearance, and I'd like to eliminate this issue.
Please see the attached files to see examples
Please let me know how I can change the drafting standard which is used by Adobe 3D Reviewer.
Thanks
~Joe

Hello Joe,
Could you please sent me your sample file in order to deeply analyse it ?
You can reach me at
[email protected]
Best Regards
William

Change position of SWF using load method

Hello,
I'm a new Flash user, so I apologize in advance if this is a
dumb question. I'm trying use the load method to load an external
SWF, which I've done. However, the SWF loads in the upper-left
corner. How can I manipulate its position?
(I want to position it more in the center?)
Thanks

you must have loaded it into a holder movie clip correct? you
can use the x and y properties of the holder movie clip to
manipulate the position. The SWF must be loaded first before those
properties are available. It is best to use the MovieClipLoader
class to load the SWF so you can use the onLoadInit event to
manipulate the properties.

Is it possible to change the window titlepane using synth?

I would like to know if it is possible, and if so, what Regions I should be editing. If not, is there a way around this?

When you ask java to take over the window decorations, the frame is made undecorated and the task is delegated to the JRootPane. So I believe Region.ROOT_PANE is what you want.
Edit
Scratch that, I don't think the SynthRootPaneUI is designed with window decorations in mind. So it's probably not possible to do.

Is it possible to change the path color using the pen tool?

I know we were able to in the past but can we now>

Here is a quick step by step on how to draw a path and stroke it with color:
Choose the pen tool to draw a path.
Draw your path. Below, you can see the path I drew with the pen tool.
You then want to select the color of the path, which is the "set foreground color" block. (you can see it above in step 1, a few tools below the pen tool). Below you can see the color I selected, then click OK.
Then select the Direct Selection Tool, you can see it circled in red below.
Then right-click the path you drew with the direct selection tool. Select "stroke path".
The stroke path dialog is brought up, you can select the tool form. I selected the pencil for this example.
Below you can see the path stroked with the color and the pencil tool I selected.
Other helpful related links:
if you have any questions, feel free to post back.
enjoy,
janelle

Possible to Change Plug-Ins Folder Used by Safari?

I'm trying to set up Firefox with no plug-ins and Safari with plugins, to switch back and forth as needed.
Both want to use the same Library/Internet Plugins folder.
Any way to alter the plug-ins directory for either of them?
Is a Unix command going to come to my rescue to set Safari's plug-ins path?

Looks like good features for Apple to add to the next Safari release...
Indeed. In the meantime, SAFT offers compelling features specific to the needs you outlined in your initial post. I suggest you give it a try.
Glad I could help. Please mark this post "answered" to let others know your question has been addressed. Also, please consider marking this post "solved" or "helpful" next to my name. Helpful for others looking for helpful suggestions to a similar question, also helpful for me.
Aloha from Big Island.
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac OS X (10.4.8) LaCie 160gb d2 HD Canon i960 printer, Airport Express (2 units)

Is it possible to change positions of pages using Adobe X?

Similar Messages

Maybe you are looking for