Is it possible to change settings in "Help System info"?

Is it possible to change Photoshop settings by clicking on Help and then System info? Since there is the possibility to type and the OK-button, I just started wondering.

All Help > System Info does is to report your system specifications so you can copy and paste them in the forums for troubleshooting purposes.
You can choose what to highlight and copy, but it does not change anything in your system like editing a configuration file would.

Similar Messages

  • Is it possible to change the search help to have Scroll capability instea

    I am using ABAP Webdynpro.  is it possible to change the search help to have Scroll capability instead of Next Page/Next line/Last line.  We would rather use a search help to do this as the user wants to have their own personal value list.

    Found the answer on SDN

  • Possible to change settings on share iphoto?

    I was just wondering if it's possible to change settings when sharing photos via iphoto in ichat (such as music and transitions)?

    To Play a Slide Show in iPhoto you can select it to play the whole library as a Slide Show by clicking on the Button
    You can see by the option to show All Events above the pics that this is a Single Event rather than the whole Library but I have highlighted the Button
    I have then this Pop Up which I have Selected the Music Tab and then the Disabled the Play Music Option
    When I use iChat Theatre I get to the same Library, obviously, and can select the group of photos or single Photo I want.
    If I select a Group and then hit the Play Button I get the Pop Up.
    I find that the Play Music options always show the default Play Music when selecting a new group of Pics no matter if I have set a Setting on another group
    SO Unlike I said Previously you will have to either preset it for the group of Pics or change it every time you want to show more than one Pic.
    7:37 PM Thursday; July 3, 2008

  • Is it possible to change settings of one single wi-fi network stored in my iPhone?

    Hi all,
    my parents bought a new wi-fi router, set up new wi-fi network with the same name, but with another password. My iPhone remebers the old password and doesnt ask for a new one, just writes "Unable to connect" ... is it possible, to change or reset settings just for this one network? I stored in the phone a lot of networks and passwords (home, parents, many friends, more workplaces, etc.) and dont want to set all of those again just because of one network change. Is there another option?
    Thanks a lot,
    Fuges

    Thank you very much, it was caused by a bit confusing translation to my native language (Czech) - "Ignore this network" instead of "Forget this network" ... Thanks and have a nice day.

  • Help / System Info causes PSE 11 to Crash

    When I select Help, then System Info, PSE 11 crashes with a "Elements 11 organizer has stopped working".
    Any suggestions? 

    There is no import option in Full Screen. You need to be in Windowed mode to import.
    Regards
    TD

  • Is it possible to change settings for an existing sequence?

    I am cutting a short "crowd-sourced" class play, shot by parents. I have 4 different types of footage from 4 cameras: Two are 720p (30p), one is a 640x480 .mov and the other was shot in 720p but burned to a PAL DVD so they are .VOB file rips at 25fps, 720 x 576 w/1.2 widescreen.The main camera is an .MTS file (AVCHD 720p)
    Since I am planning on ultimately making widescreen NTSC DVD's, I sync'd the cameras in a widescreen-DV sequence, then nested that into a new widescreen-DV sequence and activated the multi-cam. I did all of my actual editing in the new muti-cam sequence - but now I am thinking that I should have started with an AVCHD 720p sequence to sync cameras and just maintained 720p thoughout - until exporting the MPEG-2 file for the DVD.
    I can make a new 720p sequence and cut/paste everything from my timeline - but they would still be nested multi-cam cuts that link back to the original widescreen-DV sequenece I setup to sync the 4 cam views. I cannot seem to change the settings for the existing sequence - so is there maybe a workaround for what I am trying to do? Essentially, to trick the new 720p sequence (with all the actual multi-cam edits pasted into it) to linking to a new 720p sequence with the already sync'd cam footage pasted into it? And secondly, will it actually effect the quality of the final DVD output? I may also want to make a 720p web version for Vimeo if feasible...
    Any help would be greatly appreciated.

    I have created the new 720p AVCHD and cut/pasted all of my edits. That is not the problem.
    Almost of my edits (other than a few titles amd stil pics I added) are cuts from the original nested sequence called (4-CAM SYNC). It is a regular NTSC widescreen sequence. In this original sequence, I am scaling the the cameras down to fit the frame and sync'ing the four cameras. I am attempting to get this new sequence to link to a new 720p nested sequence that has my sync'd cam footage - to replace 4-CAM SYNC on the time, while still retaining all the edits I have made - I will just have to change some of my scaling settings in a few clips.
    It sure would be easier if I could change the "Editing Mode" parameter under Sequence Settings...

  • Crop Settings: CC different from CS5/Possible to change settings?

    I just recently joined CC; I used to use CS5. Back in CS5 when I would crop a picture/change the dimensions simply by dragging a corner with no additional buttons pressed. It would show me the entire picture, but the parts that were not within the crop box would be faded, to show exactly which parts of the picture would not be shown. In CC, those faded parts are completely gone. It will not show me the entire picture as I am cropping it. Is there a way to change that setting, back to what I had with CS5?

    Oh so that's what "Delayed" does. Thanks Peter! Your solution worked perfectly

  • Is it possible to change calculation schema in Purchase Info Record

    Hello friends,
    just one question. I have calculation schema assigned to PIR -> RM0002 ,can I changed it and how.
    I have tried with assigning vendor to certain (other ) group that belongs to other calculation schema without success.
    I hope you can help with ideas.
    Thanks in advance I am waiting for feedback !!!

    If you want to assign the diff schema for diff vendor than you have to create diff pricing procedure the reason is in the Pricing you are using Gross price condition PB00 which is assigned to RM0002.
    so you need to create new supplement schema like RM0002 and then assigned to your Gross price condition and then assign to your main pricing procedure
    Than create new schema group and assign that to vendor.
    M/08 for pricing procedure
    M/06 for condition.

  • Is it possible to change brightness in video play back?

    Is it possible to change brightness in video play back, without having to go to settings?
    If not, then who agrees this should be possible?
    I’m sure most iphone users have the stock brightness setting set to low to save battery power, but it’s very irritating when you go to watch a video in bright lighting conditions and in order to see it properly you have to go back out and change it.
    I am not computer programmer, but I’m sure it would be possible to have a slider (just like the volume) and could be introduced in a update.
    I think it would improve the overall iphone experience just that little bit more.
    What do you think?

    All Help > System Info does is to report your system specifications so you can copy and paste them in the forums for troubleshooting purposes.
    You can choose what to highlight and copy, but it does not change anything in your system like editing a configuration file would.

  • Still need JavaScript to change settings in iTunes 7.2 + .....

    Here what I am looking for. Once a while ago I found this neat JavaScript that allowed me to find and remove all those dead tracks that turn up in iTunes. This have been very useful to me.
    Recently I posted asking if someone could create a JavaScript that would allow me to change the Options in a specific menu found in iTunes. To get to the menu you select the podcast or song and then right-click on it. Then you select the Options tab from the window that opens. On that window I need to check that checkbox that says, "Remember Playback Position". I have grown tired of hunting for all the newly added tracks to iTunes so I thought someone out there could create a JavaScript for me that allows me to double click on the script and have the script go through some 400 files and turn this Option on. This would make my like a lot easier!!
    I hope someone here can do this. I think it is simple. I would try it but I don't Code and I don't know how to access and control iTunes by script.
    A very nice man named Robert gave it a try in VBS but I don't know if it works. I can't get the script to run.
    I'd feel safer if it was a Javascript over VBS. All I remember is changing settings on my system to make it harder for VBS to run.
    If anyone can help, wants to help of has any suggestions, please reply. I'm am just tired of making these changes every time Juice update my iTunes Playlists.
    There must be a better way!
    P

    The first time I posted this, Robert solved my scripting issue with a VBS code. I would like to have something in JavaScript so it can live along with the existing JS files I use. I guess this doesn't have to happen because Robert did such a fine job. And the scripts can still live in the same directory.
    If there is anybody out there willing to give it a try please do so. I would appreciate having the final JS file.

  • I have HDMI connection to the receiver and on to the TV - but no audio from my new Apple TV.  I have checked all connections and the video is xlnt.  Have also toggled thru every possible Dolby/Audio combination in settings.  Help!  Any suggestions?

    I have an HDMI connection to the receiver and on to the TV - but there is non audio from my Apple TV.  Not for movies, music, YouTube etc.   I have checked all of the connections and the video is xlnt.  Have also toggled thru all possible Dolby/Audio combinations in settings.  Help!  Any suggestions?

    Hello again Parker -
    The basic setup is Digital Cable Box, DVD Player, Denon Receiver/Amp and TV Monitor.  To that I added the Apple TV.  The Receiver only has two HDMI IN slots (one for cable and one for the DVD) and one out to the Monitor. 
    [I bought a switcher to toggle the DVD and the AppleTV back and forth but just disconnected the DVD to simplify when I ran in to trouble.]
    So now I have:
         HDMI from the Cable Box to the Receiver
         HDMI from the Apple TV to the Receiver (in the old DVD slot which always worked well)
         HDMI from the Receiver to the Monitor
         RCA's from the Receiver to the Subwoofer and the other speakers
    In addition I have some backup connections:
         S-Video, Optical Audio and L/R RCA's from the Cable Box to the Receiver
         S-Video from the Receiver to the Monitor
    Wait - JUST FOUND IT! 
    By going thru the excercise to track all of the connections per your suggestion, I found an anomaly when I switched Receiver sockets for the HDMI links.  The video moved but the audio didn't.  Turns out the monitor was using the optical audio feed from the receiver.  So I disconnected the optical audio and the monitor automatically switched to the HDMI audio feed!   Looked promising...
    So I first connected an optical audio feed from the ATV to the receiver - Audio!  Then I pulled it, but the audio didn't switch to the HDMI feed.  It stopped.  Would be OK if all I was going to use is the ATV, but I need the DVD player too and I can't use a switcher to toggle between them if I have to unplug the optical audio each time.
    This is becoming a career!  Any suggestions?
    Will

  • Is it possible to change the ALV report layout settings in spool request

    Hi All,
    Please let me know is it possible to change the ALV layout settings in background as we can change the layout settings in foreground to get correct format when download to excel.
    Regards,
    Jyothi CH.

    Hello,
    Add a parameter for layout on selection-screen (p_varmm LIKE disvariant-variant).
    As you are in backgroud mode, ALV will be printed with this layout (assuming you call correctly the MF ALV_LIST or REUSE_ALV_GRID)
    Regards,
    Christophe

  • Is it possible to change the settings in AR Properties Advanced tab with Adobe Acrobat XI?

    I noticed when I went to print a PDF double sided, that despite the following the guidelines from Adobe on this process, it still printed single sided.  I checked the properties of the PDF itself and on the Advanced tab, the DuplexMode was set to Simplex and was greyed out.
    Is it possible to change the settings in that tab with Adobe Acrobat XI?
    Regards
    Sharon

    Dear Sara
    Thank you for your reply.
    I have two printers, both support automatic duplexing.  Any PDF we receive
    or create we are unable to print double sided on our mac mini¹s.  I didn¹t
    make it clear in my question that we were fine on Windows XP, but, having
    recently changed to Mac have encountered this frustrating problem.
    I did a lot of research prior to recording the question and it appears I am
    not the only one who has come across this problem, and I have followed the
    guidelines that Adobe promote on their website to be able to print double
    sided, which doesn¹t work on the mac mini Osx Mavericks.
    Because the Properties, Advanced tab has ³Print Dialog Presets² that are set
    to simplex  and greyed out I took that to mean that no matter what printer
    settings I make, and I think I¹ve gone through all that I can, the pdf will
    not print double sided on Mac but will on XP.
    Sorry this isn¹t the reply you must have been hoping for and look forward to
    receiving further advice in regard to this matter.
    Regards
    Sharon

  • Is it possible to change the touchpad settings back to an older version after updating to maverick?

    Hello!
    I just updated to Maverick (really late I know) and I found that I really dislike the new options for the touchpad.
    My question is the following:
    Is is possible to change it back to the old options while keeping the new OS?
    Hope you can help me out.
    - Kanib

    No.  If you want the prior options, you will have to revert to the prior OSX.
    Ciao.

  • WC_Spaces-It's possible to change default self-service membership settings?

    Hello everyone,
    It's possible to change the default self-service membership settings for spaces?
    The user wants that every space created on Webcenter Spaces have the "Allow Self-Service Membership os Self-Service membership Change" option always selected by default.
    It can be done?
    Thanks,
    Pedro

    thank you for the answer.. but the best approach would be customizing the task flow or there's a metadata that can be changed for this option?
    thanks!

Maybe you are looking for