Is it possible to change settings of one single wi-fi network stored in my iPhone?

Hi all,
my parents bought a new wi-fi router, set up new wi-fi network with the same name, but with another password. My iPhone remebers the old password and doesnt ask for a new one, just writes "Unable to connect" ... is it possible, to change or reset settings just for this one network? I stored in the phone a lot of networks and passwords (home, parents, many friends, more workplaces, etc.) and dont want to set all of those again just because of one network change. Is there another option?
Thanks a lot,
Fuges

Thank you very much, it was caused by a bit confusing translation to my native language (Czech) - "Ignore this network" instead of "Forget this network" ... Thanks and have a nice day.

Similar Messages

  • Possible to change settings on share iphoto?

    I was just wondering if it's possible to change settings when sharing photos via iphoto in ichat (such as music and transitions)?

    To Play a Slide Show in iPhoto you can select it to play the whole library as a Slide Show by clicking on the Button
    You can see by the option to show All Events above the pics that this is a Single Event rather than the whole Library but I have highlighted the Button
    I have then this Pop Up which I have Selected the Music Tab and then the Disabled the Play Music Option
    When I use iChat Theatre I get to the same Library, obviously, and can select the group of photos or single Photo I want.
    If I select a Group and then hit the Play Button I get the Pop Up.
    I find that the Play Music options always show the default Play Music when selecting a new group of Pics no matter if I have set a Setting on another group
    SO Unlike I said Previously you will have to either preset it for the group of Pics or change it every time you want to show more than one Pic.
    7:37 PM Thursday; July 3, 2008

  • How do I remove my personal text msgs from appearing on my new iPad.  Rec for Christmas didn't realize texts appeared on iPad, changed settings, new ones didn't appear but old ones still on it.

    New iPad showing my iPhone texts, changed settings new texts stopped but old ones still appear on iPad .  It is a family iPad and don't want kids to see text from adults even g rated, glad they didn't see Christmas texts with present pictures and questions from relatives.

    As far as I know, deleting the messages on the iPad should not affect them on the iPad. I delete messages on one device and it doesn't affect the messages on the other device since they are stored locally on the device. And ... I am using my iPhone number as the contact address on both devices,
    You can create another ID for texting on the iPad, but it's not an absolute must. You just need to use your Apple ID email address, or any other working email address for that matter - as the contact at address on the iPad for texting. As long as you use the iPhone number on the phone and the email address on the iPad, texting paths shall never cross.
    this should be of some help.
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

  • Is it possible to change settings in "Help System info"?

    Is it possible to change Photoshop settings by clicking on Help and then System info? Since there is the possibility to type and the OK-button, I just started wondering.

    All Help > System Info does is to report your system specifications so you can copy and paste them in the forums for troubleshooting purposes.
    You can choose what to highlight and copy, but it does not change anything in your system like editing a configuration file would.

  • Possible define changed at least one importance in tabular form?

    There is example of the code?

    Sorry, I’m having difficulties figuring out what it is you’re trying to do. Are you asking if it is possible to change a tabular form? If so, the answer is yes, when editing your page, you can click on the report link and start editing your tabular form definition.
    Marc

  • Is it possible to change settings for an existing sequence?

    I am cutting a short "crowd-sourced" class play, shot by parents. I have 4 different types of footage from 4 cameras: Two are 720p (30p), one is a 640x480 .mov and the other was shot in 720p but burned to a PAL DVD so they are .VOB file rips at 25fps, 720 x 576 w/1.2 widescreen.The main camera is an .MTS file (AVCHD 720p)
    Since I am planning on ultimately making widescreen NTSC DVD's, I sync'd the cameras in a widescreen-DV sequence, then nested that into a new widescreen-DV sequence and activated the multi-cam. I did all of my actual editing in the new muti-cam sequence - but now I am thinking that I should have started with an AVCHD 720p sequence to sync cameras and just maintained 720p thoughout - until exporting the MPEG-2 file for the DVD.
    I can make a new 720p sequence and cut/paste everything from my timeline - but they would still be nested multi-cam cuts that link back to the original widescreen-DV sequenece I setup to sync the 4 cam views. I cannot seem to change the settings for the existing sequence - so is there maybe a workaround for what I am trying to do? Essentially, to trick the new 720p sequence (with all the actual multi-cam edits pasted into it) to linking to a new 720p sequence with the already sync'd cam footage pasted into it? And secondly, will it actually effect the quality of the final DVD output? I may also want to make a 720p web version for Vimeo if feasible...
    Any help would be greatly appreciated.

    I have created the new 720p AVCHD and cut/pasted all of my edits. That is not the problem.
    Almost of my edits (other than a few titles amd stil pics I added) are cuts from the original nested sequence called (4-CAM SYNC). It is a regular NTSC widescreen sequence. In this original sequence, I am scaling the the cameras down to fit the frame and sync'ing the four cameras. I am attempting to get this new sequence to link to a new 720p nested sequence that has my sync'd cam footage - to replace 4-CAM SYNC on the time, while still retaining all the edits I have made - I will just have to change some of my scaling settings in a few clips.
    It sure would be easier if I could change the "Editing Mode" parameter under Sequence Settings...

  • Is it possible to change a new one if the Iphone 5 wake button is not working?

      I heard the iphone 5 wake up button has a disign defect. Will they give me a free repairing even my iphone is over warranty?

    Heard from who?  Unless it was Apple, assume they are full of manure.
    There are no design issues with the iPhone 5.
    Warranty is one year from date of purchase, beyond that, hardware issues are handled via an Out of Warranty replacement which is $269US.

  • Crop Settings: CC different from CS5/Possible to change settings?

    I just recently joined CC; I used to use CS5. Back in CS5 when I would crop a picture/change the dimensions simply by dragging a corner with no additional buttons pressed. It would show me the entire picture, but the parts that were not within the crop box would be faded, to show exactly which parts of the picture would not be shown. In CC, those faded parts are completely gone. It will not show me the entire picture as I am cropping it. Is there a way to change that setting, back to what I had with CS5?

    Oh so that's what "Delayed" does. Thanks Peter! Your solution worked perfectly

  • Is it possible to email more than one photo at a time with the iPhone? Thanks

    Is it possible to send more than one photo in an email using with the iPhone? Thank you in advance for your help

    Yes.  Open your camera roll in the thumbnail view, tap the arrow button on the top right, tap all of the photos you want included in your email, tap Share at the bottom, tap Email.  Note: all email providers have limits on the size of emails that are permitted so be careful not to try to add too many or it may not be delivered.

  • Can anyone please tell me if it's possible to change the text alert tone to a downloaded tune and how to do so? Thanks.

    Is it possible to change the text message alert tone to a downloaded tune on iPhone 4? How is it done?

    Simple answer, at the minute it's not possible. That may change with iOS 5

  • Changing controlling area from single company code to cross company code

    Hi,
    Due to my client requirement, in the middle of the year, we need to change the controlling area from being same as company code to cross company code controlling area. Although the currency is same. We are going to create a new company code. Is the changing controlling area settings possible to do? what are the precautions and changes need to be taken?
    One more question, we need to change the company code when the new company code is created in the system in Cost Center Masters in the middle of the year. Is this possible after changing controlling area from single company code to cross company code. Right now company code is not appearing in the cost center master.
    Thanks & Regards,
    Saidarao

    Hi,
          If both companies having transaction data its not possible,Normally before defining Organisational Strucutre only we have to deside both companies is assigning same controlling are or have to maitain separately for this we have to compare the Fiscal year,Operating chart of accounts ,if both having same then we will assign both the company codes to one controlling area if these two companies having different currencies also its not a problem.When we creating Controlling Area we have to choose option of controlling area as same company code (if one company code one controlling Area) for example if you assigning two companies then we have to use cross company code cost accounting.If u need any further information let me know.
    Regards,
    Satya

  • Is it possible to change the settings in AR Properties Advanced tab with Adobe Acrobat XI?

    I noticed when I went to print a PDF double sided, that despite the following the guidelines from Adobe on this process, it still printed single sided.  I checked the properties of the PDF itself and on the Advanced tab, the DuplexMode was set to Simplex and was greyed out.
    Is it possible to change the settings in that tab with Adobe Acrobat XI?
    Regards
    Sharon

    Dear Sara
    Thank you for your reply.
    I have two printers, both support automatic duplexing.  Any PDF we receive
    or create we are unable to print double sided on our mac mini¹s.  I didn¹t
    make it clear in my question that we were fine on Windows XP, but, having
    recently changed to Mac have encountered this frustrating problem.
    I did a lot of research prior to recording the question and it appears I am
    not the only one who has come across this problem, and I have followed the
    guidelines that Adobe promote on their website to be able to print double
    sided, which doesn¹t work on the mac mini Osx Mavericks.
    Because the Properties, Advanced tab has ³Print Dialog Presets² that are set
    to simplex  and greyed out I took that to mean that no matter what printer
    settings I make, and I think I¹ve gone through all that I can, the pdf will
    not print double sided on Mac but will on XP.
    Sorry this isn¹t the reply you must have been hoping for and look forward to
    receiving further advice in regard to this matter.
    Regards
    Sharon

  • Is it possible to change the ALV report layout settings in spool request

    Hi All,
    Please let me know is it possible to change the ALV layout settings in background as we can change the layout settings in foreground to get correct format when download to excel.
    Regards,
    Jyothi CH.

    Hello,
    Add a parameter for layout on selection-screen (p_varmm LIKE disvariant-variant).
    As you are in backgroud mode, ALV will be printed with this layout (assuming you call correctly the MF ALV_LIST or REUSE_ALV_GRID)
    Regards,
    Christophe

  • Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID from one account to match the second account, without losing the information on each account?

    Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID for one of the accounts to match the other account, without losing the information from either account.
    thanks

    Welcome to the Apple Community.
    It's a little tricky to move data from one iCloud account to another but it can be done. But what makes you think you have 2 iCloud accounts.

  • I live in the UK but visit the US regularly. The price of a new MacBook Pro is much less in the US, and is where I plan to buy one. However, I have read that a US machine will not play UK DVD's. Is this true and if so is it possible to change the codes?

    I live in the UK but visit the US regularly. I plan to buy a MacBookPro in the US but have read that it will not play UK DVD's. Is this so? If so, is it possible to change the codes?

    All modern & new Macs can play both PAL and NTSC DVDs.  I do it all the time and it works perfectly.
    The DVD drive is set to its first region code when you first play a DVD in it.  So when you buy a Mac, whatever type of DVD you play first will determine the initial region code that is set.   If it's a PAL/Region 2 DVD it will set the DVD drive to region 2.
    The only thing you have to watch out for is if you have a collection of DVDs that have different region codes.  In those cases you may be faced with changing the region code in the DVD drive in order to play one or more of the DVDs; and as others have noted there is a limit to the number of times you can change the region code (most modern DVD drives allow up to 5 changes; the 5th change becomes the permanent change).  This is due to industry licensing practices.
    If you have DVDs that are Region 0 or All Regions you don't have to worry about region codes.

Maybe you are looking for