Is it possible to change the devices that are connected to my iCloud?

Hi!
When my mom first bought her ipad last year, I gave her my Apple ID so that she doesn't have to create one and so that we could share apps. However, now that we also have an iPad, we both agreed that it would be much simpler if she could have her own Apple ID. We created her a new one. However, we have discovered that she is still connected to my iCloud and we just can't figure out how to go back and unable her ipad to have access to my iCloud! (which is already used for our computers, iPad, Apple TV)
Thanks!
Manon

On the iPad, tap "settings / iCloud". You should see a way to delete the current iCloud Apple ID listed near the bottom. Once it is deleted, just add in her iCloud Apple ID.

Similar Messages

HT204023 Is it possible to delete other devices that are connected to your personal hotspot?

When I turn my personal hotspot on I have quite a few people that are already connected to my personal hotspot connecting automatically and I don't want them. Is there a way of resetting it so people don't automatically connect?

Again: Change the password:
You can change your Wi-Fi password by tapping Settings > Personal Hotspot or Settings > General > Cellular > Personal Hotspot and then tapping the Wi-Fi password.
Your Wi-Fi password must be at least eight characters long and use ASCII/Unicode characters. Use of non-ASCII characters (Japanese, Russian, Chinese, and so on) will prevent other devices from connecting.

I Wanna See All Devices That Are Connected To My Router

I have a E1200 router and it's pretty good however I've noticed that there are 12 devices connected to my router when infact there should only be 4 devices connected. I would like to see all the devices that are connected and disconnect the ones that don't belong HELP!
Solved!
Go to Solution.

Are you using a software to see all devices that are supposed to be connected to your router? You can reset and start over with your router. Make sure you have a security enabled on it like WPA Personal. You can try DHCP Reservation as well to ensure that the devices that will have access to your router are only the ones you included on the list.

Is it possible to change the compiler that is built into Sun Creator?

Is it possible to change the compiler that is built into Sun Creator?
I would like to compile my project to run under the JNI. I have tried to use the command line to run the javah -jni filenames but I always get errors and my assumption is that I need to change or adapt the IDE WITHOUT violating any licensing agreements to get the JNI working in this IDE.
I would appreciate any help that I could get in regards to this issue whther someone from SUN wants to comment or if any developer's have had this issue and have solved it...

Okay, I just tried this. I changed the default location of J2SE JDK in the creator conf file. Saved the file.
For example:
#netbeans_jdkhome="C:\Program Files\Sun\Creator2_1\java"
netbeans_jdkhome="C:\Program Files\Java\JDK1.5.0_04"
On restarting the IDE the new path is taken. To see the change: go to main menu -> Help -> About Java Studio Creator . Go to Detail tab. You will see the values for Java and Java Home changed as per your change in the creator.conf file.
Hope this helps.

My iMac holds my main iTunes account. How do I find out a list of all the devices that are authorized from this computer?

My iMac holds my main iTunes account and it shows 4 devices are authorized to play iTunes. I can only name 3. How do I find out a list of all the devices that are authorized from this computer?

I don't believe this is possible, but you can deauthorize all your computers and start over if you are concerned.
See here
Best of luck

In Blackberry Z 10 "HUB MANAGEMENTS", automatically changes the items that are included in my main View of the Hub Managements.

In Blackberry Z 10 “HUB MANAGEMENTS”, automatically changes the items that are included in my main View of the Hub Managements.
I really don’t know how it happens, “Off or On” thing, without knowing me. When any Email hits to my device and not shows in my “HUB MANAGEMENTS”, at that point of time I come to know, it’s Off again.
Then whole process again, I go in “HUB MANAGEMENTS” and switch it on again and again.
I need Blackberry Z10 OS developers focus on this issue…

I can confirm this behaviour and it defeats the purpose of having a hub.
Could a BBTA confirm that this has been filed or even solved internally?
Olivier - interfaSys ltd
Developing for BlackBerry 10 devices using the Sencha Touch framework.

Is it possible to add the games that are on my childrens iphones to the imac?

is it possible to add the games that are on my childrens iphones to the imac? I downloaded all of them from the Apps store. Is it because they need a touch screen for most of these game and therfore will not convey?

coolerforme wrote:
... Is it because they need a touch screen for most of these game and therfore will not convey?
No, the reason is that iOS and OS X are completely different operating systems. Apps written for one will not work for the other.

How to see all devices that are connected to Apple ID

How to see all devices that are connected to Apple ID

Are you using a software to see all devices that are supposed to be connected to your router? You can reset and start over with your router. Make sure you have a security enabled on it like WPA Personal. You can try DHCP Reservation as well to ensure that the devices that will have access to your router are only the ones you included on the list.

HT1420 How do you find list of actual devices that are connected to your itunes account? I'd like to know before deauthorizing, exactly what devices it is showing as connected

How do you find list of actual devices that are connected to your itunes account? I'd like to know before deauthorizing, exactly what devices it is showing as connected

Click here and ask. If the iTunes Store staff doesn't give it to you, no.
(86004)

HT4859 how do you see the items that are backed up to iCloud - I have 4.5 GB that I have used but I cant find where to see those items...help

how do you see the items that are backed up to iCloud - I have 4.5 GB that I have used but I cant find where to see those items...help

That is everything in your iCloud account. Videos and camera roll photos are only included in your backup, the size and content of which you can see on your phone in Settings>iCloud>Storage & Backup>Manage Storage>tap the name of your device under Backup. This will show you the size of "Camera Roll", where these are contained. (You can't see any detail beyond that.) Photo stream photos can only been seen in your photo stream album on your phone, and they don't count against your storage so they aren't part of the 4.5 GB. Everything esle is either in the backup, the items listed in Settings>iCloud>Storage & Backup>Manage Storage, or on icloud.com, where you can see your contacts, calendars, etc.

How do I see the clients that are connected to the access point?

Hello,
In Wireless Control System (WCS), how do I see all the clients that are connected to the Access Point? I can do a particular search that if I know the mac address. But what I really like to know is that which clients is connected to the network. That means it sould be able to show me, example, Client A is connected to AP 1. The problem in WCS is that I can't do that. Can some please advice how I am able to do this? Thanks.

Two ways:
First:
Under monitor, go to Access Points, then chose the target AP and click on it to open a menu, go to the Current Associated Clients tab.
Second:
User the search tool on your upper right corner, type in the target AP name, execute the search, on the results, click view list, on the list chose you AP and then go to the Current Associated Clients tab.
Enjoy.
Phil.

It's possible to change the device address of a NI2503 board

It would be nice to change the device address of a NI 2503 Switch board.
I have several NI 2503 Switch Boards in my PXI 1006 Chassis. After installing the boards and performing a MAX Refresh the device addresses of the boards are listed in a random (?) order. So its troublesome to get the information which device is related to which slot.
I have more than one 1006 Chassis with the same configuration of NI 2503 Boards and I may avoid to have different software versions with different device numbers for the chassis.

The short answer is no you can't modify the device numbers for the switches.
The long answer is that device numbers are set by the bios and you can't modify them. In your 1006 chasssis there are 3 buses and in each bus the devices start at some number like 15 or 20. As the slot number increases the device number decreases. The best way to view what device numbers are assigned to which slot you need to open the pxisys.ini file on your computer. The slot number and device numbers are total dependant upon your controller. The best place to verify that you have the correct ini file is to see the following webpage : PXI VXI/VME and PXI Controller Peripherals. The ini file is only an indicator of
the settings in the bios. If you change any of the devices then you will lose functionality of that board.
There is some hope though. One thing that you can do is use the IVI support for the switches. If you download the Class Drivers for switches, then you will be able to create an IVI devices and logical names in Measurement and Automation Explorer (MAX). The IVI devices will hold the address of the module (i.e. PXI0::14::INSTR). Then create a logical name that points to the IVI virtual device. This logical name can then be referenced in LabVIEW instead of the module address. Then when you need to modify the slot number/device number of a device you simply need to modify the IVI device. There is a tutorial that will step you through this process found in the Developer Zone at : Using Measurement & Automation Explorer to Configure Your IVI System
Good Luck

HT4314 someone is using my account on clash of clans, can you remove all the device that are cnnected to my apple id? so i will be the one who can use it because iam the only one who knows my password. please help me guys i need my clash of clans

Hi im allen. My problem is someone is using my account on Clash of Clans. Can you remove all device that at connected to my apple id? Will I be the only one who can access my game center and apple id thanks a lot apple team!
<Email Edited By Host>

Apple is not here.
There are only users here like yourself.
We can do nothing at all about any devices on you AppleID.

How do you change the fields that are displayed on the email preview list after a search?

How do you modify the fields that are displayed in the mail preview list in the center column of Mac mail after you conduct a search of your email? All of a sudden the displayed fields changed on me whenever I do a search in mail. When I have not filtered my email with a search, the default field shown in bold at the top of each message's preview is the "From" field. However, when I do a search this changes to the "To" field. Can anyone help? Thanks, ccarey

ipicus
But why would you want this?
iTunes is responsible for the File Management, let it get on with it, you do your organisation in the iTunes window. And everything you need to do, you can do via the iTunes Window. Want to find the file of a track quickly? Right click on it in the iTunes Window and select Show File: A finder window pops open with the file already selected.
Regards
TD

Change the Client that J2EE connects to !

Hello Folks,
Our J2EE engine seems to be connected to Client 001(j2ee_admin user is actively occupying the sessions). But our active client is different.
How do we change the client that a j2ee engine connects to? We are in CRM5.0
Thanks

Hi Senthil,
If you want to just change the client then you have to go to the XCM of your application and follow the following link.
Components -> customer -> jco. here you will see the details of the client which you can change.
But if you want to keep the existing client and create another scenario which will connect to the diffrent client then you have to create a new jco, new Application configuration, new RFC connection. In CRM system you have to check the transaction SRMO.
<b>Allot points if my post helps!!</b>
Best regards,
Vikash.

Is it possible to change the devices that are connected to my iCloud?

Similar Messages

Maybe you are looking for