Is it possible to change the drafting standard used by Acrobat 9 Pro Extended?

Hi All,
I've seen some inconsistent behavior when converting CATIA V5R19 data to 3D PDF, specifically in regards to the appearance of PMI (3D dimensions, text, flag notes, etc)
It appears that Acrobat / Adobe 3D reviewer show 3D PMI according to ISO standards.(or some variation)
However, we use a variation on the ANSI standard for our drawings and 3D Models.
This results in a significantly different appearance, and I'd like to eliminate this issue.
Please see the attached files to see examples
Please let me know how I can change the drafting standard which is used by Adobe 3D Reviewer.
Thanks
~Joe

Hello Joe,
Could you please sent me your sample file in order to deeply analyse it ?
You can reach me at
[email protected]
Best Regards
William

Similar Messages

  • How to change the default Typewriter font in Acrobat 9 Pro

    This is driving me nuts. Is there a way to change the default typewriter font in Acrobat 9 Pro?
    Thanks in advance.

    Use  the Typewriter Tool bar.
    For changing Font:
    For changing Font Color:
    Be well...

  • What are the benefits from upgrading from Acrobat 9 Pro Extended to Acrobat11 Pro?

    What are the benefits from upgrading from Acrobat 9 Pro Extended to Acrobat11 Pro?

    Acrobat is a program used by a wide variety of users for a even wider number of purposes. So if we simply gave you a feature list, that wouldn't be very helpful.
    Tell us how you use Acrobat, and what you do with it, and we can suggest improvements that were made in Acrobat X and XI Pro.

  • How to change the size of page in Acrobat XI pro

    I would like to save a PDF docuemnt with another size of page.
    I can't figure out how to do it.
    For Acrobat X and earlier the advise was to go to Crop tool (or by Ctrl-Shift-T) and chose from drop down menu.
    This advice seems to eb not valid anymore with Acrobat XI, as Cropt tool doesn't have any drop down menu, but Ctrl-Chift-T leads to Insert Page dialogue.
    I'd appreciate an explanation whether it is possible in Acrobat XI Pro and how.
    Thanks!
    -Sergey-

    http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7b8a.w .html

  • Change the "Instructions Line" in Adobe Acrobat 8 Pro for fillable forms

    I have created a fillable form in Adobe Acrobat 8 Pro - Currently the Instructions say "Please fill out the following form" - I need to change it to "Fill out highlighted fields, choose "Print Form", and follow Instructions on printed Form".  I don't know how to customize the default instructions.

    You don't have the ability to change that. If you did, it could be used to spoofing purposes. You can display instructions in a popup dialog or button on the page that when clicked hides itself.

  • I am unable to create a form that I can move the fields in - using Adobe Acrobat XI Pro on a PC

    I need to make fill-in forms with little space between questions.  Adobe Acrobat XI Pro does not allow me to alter fields and sizes as I need to.  Advice?

    Is the Snap to Grid option ticked under View - Show/Hide - Rulers and Guides? If so, un-tick it.

  • Is it possible to change the window titlepane using synth?

    I would like to know if it is possible, and if so, what Regions I should be editing. If not, is there a way around this?

    When you ask java to take over the window decorations, the frame is made undecorated and the task is delegated to the JRootPane. So I believe Region.ROOT_PANE is what you want.
    Edit
    Scratch that, I don't think the SynthRootPaneUI is designed with window decorations in mind. So it's probably not possible to do.

  • Is it possible to change the path color using the pen tool?

    I know we were able to in the past but can we now>

    Here is a quick step by step on how to draw a path and stroke it with color:
    Choose the pen tool to draw a path.
    Draw your path. Below, you can see the path I drew with the pen tool.
    You then want to select the color of the path, which is the "set foreground color" block. (you can see it above in step 1, a few tools below the pen tool). Below you can see the color I selected, then click OK.
    Then select the Direct Selection Tool, you can see it circled in red below.
    Then right-click the path you drew with the direct selection tool. Select "stroke path".
    The stroke path dialog is brought up, you can select the tool form. I selected the pencil for this example.
    Below you can see the path stroked with the color and the pencil tool I selected.
    Other helpful related links:
    if you have any questions, feel free to post back.
    enjoy,
    janelle

  • Is it possible to change the PDF document on my website through in-browser editing after I've published my website?

    I've uploaded site but want to change PDF asset through in browser editing. Is this possible?

    Hi,
    It is not possible to change the PDF asset using IBE.
    Regards,
    Aish

  • Change the desktop background colour of Acrobat 9 Professional?

    Is it possible to change the desktop background colour in Acrobat 9? The reason I ask is we are supplied newspaper ads and sometimes they have a black keyline on the border of the PDF.
    The dark background on the desktop can make it difficult to see a fine keyline. We were previously using Acrobat 7 Professional which had a white background.

    Doesn't work
              ^                                                                                    ^
    Obviously, I can't, in this particular screenshot show everything.
    This is what the fellow is talking about.  Naturally if his keyline item is in Black it ain't going to show up  In Acrobat previous to 9 all this back Ground was grey.

  • Install Acrobat 9 Pro Extended from Acrobat 9 Standard

    I attempted to do an upgrade from Acrobat 9 Standard to Pro Extended having purchased the software from a sales rep who said I could do this as did technical support.
    My system is XP Pro/SP2 32-bit.
    During the install I ran into this problem. http://kb2.adobe.com/cps/401/kb401731.html. Being stupid I continued on
    instead of stopping. Once I got to the section that I am asked to input the Pro Extended serial number and then my STandard serial number I ran into further problems. The dropp down menu asked for which current version of Acrobat, which of course for me was 9 Standard.
    The problem was the drop down menu has no option for Standar only Professional.
    Since the sales rep had told me I could upgrade I hadn't read the label on the Extended Pro box, which says it's only an upgrade for Professional If I had called in at that time I would have resolved that issue, but not the missing DLL.
    I then found out I couldn't uninstall the mess so I did another stupid thing and did a system restore, which just compounded the problem. To make a longer story shorter I downloaded MS Windows Cleanup Utility and removed  Acrobat.com and Acrobat 9 STandard. I then downloaded WinCS4Cleanupscript and unzipped and ran it. So far so good.
    Then I was advised to install Pro Extended as a trial and customer support would take care of the license issue. Ok, again so far so good.
    I then attemped to install Pro Extended as trial and ran into a printer problem similar to what I had
    encountered before, but not exactly the same.
    "Setup can not copy file PSCRPTFE.NTF" and issues about printers not being Windows logo compliant I believe it was.
    (I have a new wireless Brother HL-2170W laser and Canon MP830 inkjet and just updated the driver and firmware...maybe that will load the missing driver)
    A this point the installation was terminated and I was advised to follow Adobe TechNote KB403613. The only item that I could possiblity help with this printer problem is the Hotfix kb-930627, but this is for a 64-bit system not 32? Do I download or not?
    I also just found out that I still have some vestige of Pro Extended on my system though the MS Cleanup Utility doesn't list anything. Do I run WinCS4Cleanupscript again?
    a) How do I fix the PSCRPTFE.NTF issue with my printer(s)
    b) Do I download a 64-bit hotfix kb-930627to my 32-bit system...and will that solve the printer problem?
    c) Do I just ignore what's left of Pro Extended on my system or run Winc cs4Cleanupscript again. I can't run it directly from all programs, but if I click
    on Acrobat 9 Standard under start it opens up or at least that's how it's identified.
    d) Anything else?

    I might as well update my own question:
    I followed the instructions given in the Adobe TechNote kb403613 after running WINCS4Cleanupscript.
    However, I did NOT download the hotfix as that's for a 64-bit system. The phrasing of the hotfix wasn't very
    clear to me, but I don't think when it stated XP Home or Professional meant a 32-bit system rather only 64-bit.
    If anyone knows better let me know. I checked out that specific hotfix and said was for 64-bit OS.
    1) Created a new user account with Admin rights
    2)  I did the "intermediate troubleshooting" listed in kb403613 and found a few files to delete and I also ran the disk defragmenter.
    Might as well catch any problems up front instead of waiting.
    3) There were several directories on the DVD but only copied Acrobat 9 Pro Extended to my desktop in the new user account.
    4) Ran msconfig and disabled all programs under the start up tab. Once you click OK a small window pops up
    and you press restart. Remember to write down any programs listed in startup that are not enabled so you
    can deselect those when you enable the startup menu again.
    5) On restart and booting up press F8 to get the start up options and select VGA mode.
    7) Once you in Windows log back into the account you created to just install Acrobat
    8) Open Acrobat 9 Pro Extended on your desk top and run the installer
    Desktop>Acrobat 9 Pro Extended>Acrobat9>Acro3D
    9) Run the install. In my case I selected trial version.
    10) I still ran into a problem with Windows Logo compatiblity issues with  my printers.
    I could either continue or stop the installation, which I did to attempt to determine just what's
    causing that problem.
    11) there was some auto backout of files, but I still had to run MS Cleanup Utility again and remove Acrobat 9 Pro Extended.
    Also ran WINCS4Cleanupscript though nothing there.
    12) I then did a restart and booted into normal Windows mode from VGA mode.
    13) Logged into my account and ran msconfig to enabled my startup menu and then deselected the ones I didn't want.
    OK, I am back to square one. I checked the Windows Logo Product List and found my Brother HL-2170W is
    XP, VISTA and W7 Windows Logo certified.
    I checked my other printer a Canon Pixma MP830...well not so good. It's logo certified under Vista and W7, but not XP.
    I had downloaded the lastest driver and firmware, but that didn't seem to help. I did email Canon. Now these printers had
    no problems when I was running under Acrobat 9 Standard.
    Right now my only option appears to be to just run the install and continue on when I get to the printer issue. Still don't know what
    will happen when I get to the serial numbers. I am suppose to call support and they will fix activation. So I am told...

  • Is it possible to change the position of beining of text in a standard report

    Hi,
         I am wondering wether it is possible to change the position of the test (the starting point) in a standard report. I would like to print a label with different texts at different positions. If its not possible in a standard report is there any other way to do it.
    Thank you,
    Mudda.

    Hi Mudda, I don't see any way myself to set any particular starting position for your text. It looks like the best way to emulate this behavior would be to add a new line with lots of tab characters or spaces to place your new text at a specific offset from the left. You can also use Append Table to Report and wire in a 2D string array with only a few positions filled in with your various text labels as shown below. This will space text labels pretty well across the page. Try it out and see if it works for you. You could be more clever and build the 2D array programmatically if you wanted more control over position.
    Message Edited by Jarrod S. on 06-02-2006 05:37 PM
    Jarrod S.
    National Instruments
    Attachments:
    Set_Report_Position.JPG ‏69 KB

  • Is it possible to change the costing from moving average to standard??

    hey all,
    i wana know is it possible to change the costing from moving average to standard or vice-versa in the item master??
    cheers

    Hi Satish
    Please look at the documentation from SAP for using this function. I just looked on my drive and can't find the document I used to have for this.
    Just setting quantities to zero will not work as all open P/O, S/O, etc must also be closed before you can run the Inventory Valuation Method function. This is all detailed in the document.
    I have done this successfully before for a client with over 4000 items, so I have been through the process. Please let me know if you need assistance.
    Kind regards
    Peter Juby

  • Is it possible to change the dimension order when extracting data from HFM?

    Hello,
    When accessing Consolidation/Extract/Data is it possible to change the dimension order of the extract rather than extracting the standard order?
    I can see you can change the dimension order visually by going to "Reorder dimensions" but this does not carry through to the actual extract.
    If its not possible using this method is there another method? Trying to avoid using smartview for this purpose.
    Many thanks and kind regards,
    Rich

    Hi,
    No, it is not possible to change the order type.
    -Paul

  • Possible to change the room laout (Navigation)

    I just succesfully created a coll. room in which it is possible for peple to discuss and upload docs. Now is it possible to change:
    - The navigation: Edit names and place em in the second level navigation
    - Is it possible to customize the documents part to my needs, like add more folders, put in some opening text and color. This is all pretty standard and i want to use this to develop a customized one. So:Can i import this in NWDS or sommit?!
    Additionaly: when you would make a page for your customers that should be exactly like they wish, but has great similarity to existing collaboration tools. Would you then:
    - Use the existing collaboration and customize.
    - Create an own application
    Is it possible to download these kind of applications from others?
    Message was edited by:
            Hans Wassink

    Hi Hans,
              Yes. It is possible. You can change layout of room.
    Create custom layout for your need. And assign this layout to particular room.
    Follow the given steps to change layout of the room.
    System Adminstration -> KM Content
    You can see list of folders in content area.
    room extensions - > cm stores -> documents -> workspaces.
    There you can see one or more folders named as 'documents'. Find your folder and change the layout of that folder. It will help to you.
    Thanks and Regards,
    Venkat

Maybe you are looking for

  • Distinct Count Measure Total in Two Dimensions

    I have a report that pulls data Site and then drills down to User for Content Usage for Six Months. These are separate dimensions in the cube. I have a DistinctContent Measure that pulls for both Site and User appropriately when I use separate querie

  • How to get first index in ListItemCollectionPosition

    Hi Every One    I have one issue in SPList.ListItemCollectionPosition. it is return second page start index( query). I need to get first page index(query). I am using following code. int totalItemCount = SPWeb.Lists.TryGetList("ListName").ItemCount;

  • Issues with XML Source Code

    Has anyone seen or heard fo this issue: I was sent a new xml source code and loaded it into my .rtf file. When I went to preview the file it showed up no problem. All great and dandy! When I tried to add a field and preview the field would not show u

  • A Nice Audit Script

    Hi, I am trying to build yet an other database audit script. Actually my db target are 9i/10g. The goal is to tell if the database respect some standard and good basics practice. I want to be able to parse the result because it have to run on many da

  • OS 10.5.8 sync error message

    Since I installed a suggested security update from Apple a few days ago I keep getting the message: Database Reset Allert Inconsistencies in your sync information for Bookmarks were detected and have been repaired. The next sync for Mobile Me and Saf