Is it possible to change the first page of a web application that was built using the UI?

Hello Community
    Using Sharepoint 2010 Server and the UI I built and application and would like
to continue building the web application using the UI.
    The application's first page was built using a Blank Site template and
the subsequent subsites were built using the Team Site template.
    In retrospect the first page should also have been built using a Team Site template.
    It may be unnecessary to make to delete the application
and create the first page as a Team Site and then have to create all of the
subsites (Team Sites) all over again.
    As a solution to prevent deleting the whole application and creating application
with all of the subsites all over again whether it is possible to do any of the
following:
    - Convert the Blank Site page into a Team Site page which would allow
me to leave all of the subsites as is.
    - rename the Blank site page which would in effect would be renaming the application
then create a new Team Site page which would be essentially creating a new application and
then adding all of the subsites contained in the renamed application that has the first page
as a Blank page.
    And if is possible to add, copy or move the subsites from existing sites to a new Team Site
page, how do you add, copy or move the subsites from one application to a diffent application?
    Thank you
    Shabeaut

Hi Shabeaut,
According to your description, my understanding is that you want to change the template of the root site without creating the susites in another web application.
I recommend to export all the existing subsites and import them to new web application.
More references:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/cc7c11ec-e4da-4ddb-babd-db76ccb35664/move-subsite-to-new-site-collection?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd321bac-16a7-47e4-842e-00b7ca0f7f05/move-subsite-to-other-site-collection-as-subsite?forum=sharepointadminprevious
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Similar Messages

After installing an application that was created using the Application Builder

After installing an application that I created using the Application Builder I get this error if I try to run " ANY " LabVIEW App's that I have built. "Executable Version 7.1.1 doesn't match Resource File 7.1. Check your configuration."
The way that I tried to fix this is to reload LabVIEW 7.1 and DAQmx 8.0. I am using two NI-6528 switch cards.
After I reload LabVIEW and DAQmx I can run my applications but as soon as I install one on this development machine the error begins again.
The executable that I built works fine on the development machine and any other machine that I try it on but it appears that the Run-Time engine 7.1 becomes corrupt after I run setup.exe for the newly created application.
I have built numerous Installers, setup.exe's in the past without this error. Just this latest one caused this problem to start.
I can NOT upgrade to 7.1.1. I am doing work for many different sections of this factory and I can not force them to upgrade. I've asked. Others supply code for the same machines using LabVIEW 7.1.
I am stuck creating executables and manualing moving the correct files to the target machines.
What can be done?

No. The KB article was talking about a machine with 7.1.1 installed. I have LabVIEW 7.1 installed.
The machine that I am having trouble with is my development machine. LabVIEW 7.1, DAQmx 8.0.
If I build the executable all is fine. I can still run old executables including the one I just built.
If I create the installer all is fine. I can still run old executables including the one I just built.
When I install the app on my development machine the corruption occurs. I can " NOT " run old executables including the one I just built. The subject error pops up.
I have not moved any executables to the other machines yet. I don't want to corrupt others.

What is the proper way to deploy a Web application, that was developed in Visual Age for Java Professional edition 4.0 IDE, to iPlanets Web server Enterprise edition 6.0?

Oh man it looks like a problem with the web server.
Its an error that happens on SAP, even my dad reported an error like this to me but i wasn't able to solve it.
What i find is that its an error with browser incompatibility,
Check this http://scn.sap.com/message/10338540

Is it possible to change the color of imported art in pages, say from B&W to a color? ... or even to make it a gradation of color?

Is it possible to change the color of imported art in pages, say from B&W to a color? ... or even to make it a gradation of color?

Make a Shape > Inspector > Graphic > Tinted Image Fill > Scale to fit > browse to image > click on the color patch to change the color to what you want
or
Drag in an image > overlay it with a Shape > select the color for the shape and change its Opacity
Shapes may have Gradient and Advanced Gradient (multiple colors) fills both linear and radial. Both are in the Graphic Inspector as is Opacity.
Peter

Is it possible to change the page of a linked PDF without relinking?

Is it possible to change the page of a linked PDF without relinking and going through the import options?
I'm trying to import seveeral pages of the same PDF. The process would be quickest if I could import it once, then duplicate the image box a number of times, then just change the page number each image box is linking to.
At the moment I'm having to relink (or place), then go through Import Options, then choose the page - it's a long process that feels like it should be quicker.
Any ideas?
Thanks

The short answer is no, that's not possible, but it IS possible to import multiple pages at one time.
My favorite script for this is from Scott Zanelli: InDesignSecrets » Blog Archive » Zanelli Releases MultiPageImporter for Importing both PDF and INDD Files, but there's also a sample script included with ID.

Is it possible to change the colour of the Pages' skin, since it is grey, is there any way to change it and make it less tedious?

Is it possible to change the colour of the Pages' skin, since it is grey, is there any way to change it and make it less tedious?

fruhulda wrote:
If you see any grey"background" if is on the left and that is the comment field.
Hi fruhulda
It's not the comment field which is a restrictive description.
In fact it's the window's background.
Yvan KOENIG (VALLAURIS, France) lundi 26 septembre 2011 12:08:45
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Is it possible to change the spell check dictionary in "pages for iPad" from Spanish to UK English? The app was downloaded in Spain.

Is it possible to change the spell check dictionary in “pages for iPad” from Spanish to UK English? The app was purchased in Spain and I am living in spain temporarily

Spell checking should be based on the keyboard layout that you've got selected in Settings > General > Keyboard > International Keyboards - if you have an English 'UK keyboard' selected then the spell checking should be English

Is it possible to have a link/button inserted into the end of my flash video that makes up the first page of my web site

i am not sure if this will make sense so please tell me if it
doesn't. is it possible to have a link/button inserted into the end
of my flash video that makes up the first page of my web site. the
video plays showing the name of the site then fades to show the
text "enter" which i want to make the link to the next page.

> the video plays showing the name of the
> site then fades to show the text "enter"
in FLASH set a gotourl action on the last frame of the move.
If this is a "splash page" and has a dancing company logo and
a throbbing
drumbeat- reconsider. Just make the homepage of the website
the homepage.
Don't make people wait to see some content.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

How is it possible to change the page of 1 tab to Page 2 then to page 3 etc using a boolen control?

Hi sir,
I created A tab control of 4 pages.How is it possible to change the page of 1 tab to Page 2 then to page 3 etc using a boolen control?
Please Mark the solution as accepted if your problem is solved and donate kudoes
Solved!
Go to Solution.

You have a couple of possiblities:
Keep the tab value in a shift register and use a value changed on the boolean to increment or decrement the tab. Write to a local variable of the tab as needed (I would recommend against value property nodes as in the above examples by others).
You could also hide the tabs and make the tab control an indicator. Now you can write directly to the terminal if the boolean changes and you don't even need a local variable.
Here is an example showing both (LabVIEW 8.2).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
TabSwitcher.vi ‏18 KB

Is it possible to change the color of the regions in GB 11?

Is it possible to change the color of the regions in GB 11?

Gourmet Pizza wrote:
Is it possible to change the color of the regions in GB 11?
only an imported orange region (to purple):
http://www.bulletsandbones.com/GB/GBFAQ.html#orangetopurple
(Let the page FULLY load. The link to your answer is at the top of your screen)

Is it possible to change the URL of an application?

Hi All,
I was working with the oracle apex and created few applications almost a year back, due to my higher studies there is a gap with the tool..and finally I am in.
Am planning to create an application which will be similar like a personal website.My doubt here is ..whether it's possible to change the URL by keeping a simple one which includes my name also
instead of having this big..
http://apex.oracle.com/pls/apex/f?p=10221:1:116416608594529
I can understand that the whole URL describes the appln no,page no and session ID but its my doubt possible or not..If possible then how to proceed?
Thanks
with Regards,
Ramya.

My doubt here is ..whether it's possible to change the URL by keeping a simple one which includes my name also
instead of having this big..
http://apex.oracle.com/pls/apex/f?p=10221:1:116416608594529
I can understand that the whole URL describes the appln no,page no and session ID but its my doubt possible or not..If possible then how to proceed?
If you are just looking for a nice and short URL to start your application, why not just use a URL shortener service like goo.gl ?
Just put in your long URL and it will create a nice and short URL for you... for example, the above URL is now http://goo.gl/FijYxn
- Morten
http://ora-00001.blogspot.com

Is it possible to change the formating of a template.

I am new to iweb & working on a heavy web site. I use Template "modern" & Blog page for the entries.
1. Is it possible to change the Heading colour & size to a different one in the template, without changing it in each & every Blog entry.
2. I want to remove the "Read More" text from the main Blog page & want to link a PDF file in that location. Is it possible.
Please help
Thank you

I could not find any way to do that. There is no way access the song information like you do through iTunes.

Is it possible to change the URL of the browser corresponding to changes in the timeline?

Hello,
I'm trying to create a whole website in Edge. Is it possible to change the browser URL for different sections of the animation. For example me.com/part1 leads to 2.0 seconds in the animation. And for example when you type me.com/part2 the browser would go to 4th second of the animation. And vice versa, when the animation reaches the 4th second the browser URL would change to me.com/part2. It would be really great if that were possible. Any ideas on how to accomplish it?
Thanks!

Hi there, Joel's example seems to be exactly what you're trying to do. All you need to do is replace his functions with your functions.
There are two main parts to his example: 1) reacting to a URL change directly in the URL bar, 2) reacting to a button click, and setting the URL
Regarding Item 1: this line (this adds a listener for when the URL hash is changed, and calls the 'sym.animate' function in his example). Note that he is linking the value after the # with the symbol names 'panel1', etc. This line enables the functionality for you to be able to directly change the URL to: testStep95.html#panel2, and the site will change pages.
$(window).on("hashchange", function(){sym.animate(location.hash.replace("#",""), sym.onStage)});
Regarding Item 2: he's setting the page title (based on the active panel symbol) and URL hash, in the 'sym.animate' function. He calls the 'sym.animate' function on click of btn1, btn2, btn3:
document.title = panelIn;
window.location.hash = panelIn;
Props to Joel for his slick example!

Is it possible to change the position of beining of text in a standard report

Hi,
I am wondering wether it is possible to change the position of the test (the starting point) in a standard report. I would like to print a label with different texts at different positions. If its not possible in a standard report is there any other way to do it.
Thank you,
Mudda.

Hi Mudda, I don't see any way myself to set any particular starting position for your text. It looks like the best way to emulate this behavior would be to add a new line with lots of tab characters or spaces to place your new text at a specific offset from the left. You can also use Append Table to Report and wire in a 2D string array with only a few positions filled in with your various text labels as shown below. This will space text labels pretty well across the page. Try it out and see if it works for you. You could be more clever and build the 2D array programmatically if you wanted more control over position.
Message Edited by Jarrod S. on 06-02-2006 05:37 PM
Jarrod S.
National Instruments
Attachments:
Set_Report_Position.JPG ‏69 KB

Is it possible to change the default URL when creating new hyperlinks?

I'm currently working to take a 128 page catalog that was created in InDesign for print and turn it into a interactive PDF to post on our companies website. The catalog contains thousands of part numbers and I'd like to link each one to its corresponding stock status page on our website that gives current availability and pricing for any particular customer.
So say I'm dealing with part number "XXXX". When I go to add the hyperlink the default web address it spits out is " http://XXXX ". Instead of that, would it be possible to change the default to " http://forums.adobe.com/discussion/XXXX/1 ". Obviously I just used this website as an example, but it would save so much time if I could avoid having to type the exact same URL every time.
Or maybe is there a quicker way to do this other than what I am currently trying?
Thanks

I've found some external software applications that will do it, so that leads me to believe its not possible within ID CC.

Is it possible to change the first page of a web application that was built using the UI?

Similar Messages

Maybe you are looking for