Is it possible to change the font size of the PO terms only in the email?

Hi all,
Is it possible to change the font size of the PO terms only?
We are emailing PO and terms to the Suppliers.
Is it possible to reduce the font size on terms only so that the file size is smaller and easy to print on the supplier end?
TIA

Are we talking out Purchase Order PDFs here.
If you are mailing PDFs I think you can take a look at the XSL FO Stylesheet which is being used to generate the PDF for a PO.

Similar Messages

I cant' control the font - size displayed during edition is different from the ones (1 or more - never know) sent.

1) When I edit my e-mail, the font is always the same - arial 10 pts. But once the e-mail is sent, what I can see in my 'sent' box and what the receiver gets is all messed up, especially when I have pasted some text. There are parts with huge font and there are with such a small one that it's difficult to read it. Or the whole text is extremely large or tiny.
I need to write in HTML for I often must highlight some parts. I searched many forums but nowhere found any answer.
2) When i get an e-mail the problem is similar: it can be written with the letters you can distinguish from the other side of the room or on a contrary - you would use binoculars to read it comfortably. The least font is set to 10 pts.
Thunderbird 31.3.0, Win 7 (64).

From John Waller: “If you're using IE8, hit F12 to launch Developer Tools which give you a point and click method of locating the relevant CSS rule on screen.”
I have Internet Explorer 8 (IE8) so tried this method.
This sounded like another promising possibility; however, I have not been able to change the font size in my post using this method.
I have gone to Dashboard > Posts > Edit > then moused-over my post > clicked on "edit" and then hit F12. An enormous amount (20 pages or more) of CSS appears. I tried picking out the font size that I thought pertains to the post (under Text Area), and I have changed the font size from 13px to 24px; however, I have not been able to “save” the new setting. When I go back to it, it is back to 13px.
As a result, I have not been able to use a trial-and-error method to establish which font size I must change in order to change the font size of my post.

Somebody please help me with adjusting the font size for itunes on my pc. The font in the itunes store is to small for me to read.

I can't find a way to adust the font size when I am in itunes on my pc. I know how to adjust the display setting, but that seems to be an overkill. I don't need to use the largest font size all the time. Surely there must be a simple way to just adust only what I need to in itunes.

You are not addressing Apple here. We are all just users like yourself.
First, log into your account on a computer and go to your purchase history and look for charges.
Next contact iTunes if necessary
Apple - Support - iTunes - Contact Us

How do you change the font size?

This is a rather simple question.
How do you change the font size in flex builder 2?
In the preferences for flex>editors there is no option to
change any font settings.
i'm sitting quite far away from my LCD and can hardly make
out the text.

Window -> Preferences -> General ->Colors and
fonts

How can I change the font size and placement of photo descriptions in an iPhoto slide show?

With an iPhoto slide show, how do I change the font size for titles and descriptions and position the text when preparing a slide show?

to change the pixels crop to 100x100 and export with maximum dimension of 100 - see the user tip on exporting foo details on Export options - Exporting From iPhoto
As to DPI - digital photos have no DPI since DPI is Dots Per Inch and digital photos have no inches hence no DPI - when you print a photo then DPI is a mathematical calculation - dots divided by inches - it is not a setting
Print a 480 pixel photos as a 1" square and the print it 480 DPI (480 / 1 = 480) and print the 100 pixel image as a 1" square it will be 100 DPI (100 / 1 = 100) - print a 480 pixel photo as a 4.8 inch square and it is 100 dpi (480 / 4.8 = 100) - just a calculation - not a setting
LN

8350i: Changing the font size results in screen redraw problems

Hey everyone.
BlackBerry 8350i
v4.6.1.204 (3.0.0.73)
BBAlpha Sans, size 8
When the screen redraws to account for a change in font or font size, there is a redraw problem that overwrites portions of the menu. Steps to repro and some supporting dialogue from a 3rd party software developer are below.
Steps needed to observe the problem:
Go to Options -> Screen / Keyboard.
Select Font size.
Roll up and down between the different available font sizes.
Observe that sections of the font size menu disappear and reappear as the "Quick brown fox" example text is redrawn.
I have always thought that menus should receive visual preference, meaning that anything redrawn in the background should not overwrite them. The 8350i does not seem to honor this convention, however. Instead, the sample text renders in front of portions of the font size menu list, making those portions of the menu disappear.
Case in point: AstraSync 3.0, just out of beta, uses some nice stylization for its main email presentation screen. However, when you click the menu button, the menus are slowly devoured by the background text and eventually become invisible. I reported this issue to AstraSync tech support and they have stated that this appears to be a bug in the 8350i, not their software:
James and others, Unfortunately the problems with the menu disappearing
appear to be a device issue and as such is not something that we are
able to fix.
-Vicky Cwilewicz, Wednesday, April 08, 2009
http://forum.astrasync.com/Default.aspx?g=posts&t=649
This conversation occurred while the AstraSync software was in beta, and I have confirmed that the issue continues now that the software is out of beta. Given the phone's own rendering issues within Screen/Keyboard, I think their claim, that this represents a bug in the phone itself, has some merit. Any thoughts or advice on a workaround? Assuming that this is truly a bug in the device software itself, will RIM please consider addressing it?
Thanks,
James
Message Edited by jmegna on 06-02-2009 01:16 PM

This problem is also evident in Opera Mini. A bit of googling revealed it was introduced in OS version 4.6.1.128. This is quite clearly a device bug and we would appreciate a response from RIM on the matter.
Cheers

Is there a way to adjust the font size in the digital signature?

The attributes, of Name, Date, Location, Reason, Distinguished Name, etc. Is there a way to adjust the size of the font and the display?
Thank you.
Chunkee

Hi Chunkee,
I know it's not what you want to hear, but the answer is no. You can change the font, but not the font size because Acrobat will try to fill the signature field using dynamic sizing. I've found that id the default Helvetica is too big you can experiment with different fonts as they have different proportions and will come out different sizes.
Steve

The font size in web page composer 7.3

Hello,My corporate is using SAP NetWeaver Portal 7.3 now.
I want to use Web Page Composer 7.3 to build a firstpage for my company,but I find a strange problem.
When I create a web form,for example Link List or Paragraph,after I preview ,the disalpy font size is very big.
but I remember in the release 7.0 the font size is very proper.
I find the types configures ( km > etc > wpceditor > types) is the same in both release7.0 and 7.3
Now I don't konw what to do ,anyone can help me ?
Thanks a lot!
Best regards!
lexian.

Hi,
now we have the tinyMCE editor, where you can insert and edit html-code. It works fine now for the layout,
but there are still a few problems with the links..
In the edit mode there are displayed all km images out of the km. But the images aren't displayed under the portal role, when i publish the page. And all the links like one to a wiki or the TBN links doesn't work, too.
Can anybody help me further?
Thanks in advance,
Lydia

How can I increase the font size in the Apple Mail app window?

My 83yo mother has been having trouble with Mail on her iMac. The font size used to be quite large in the app window, but it is back to normanl. How can I increase the size so it defaults to large when opened?
thanks

Hi Bob,
In Mail>Preferences>Fonts & Colors you can set the size for several areas of Mail...

There is a problem with the font size of the itouch 4.

I was given a new ipod touch gen4th (ios 4.3.5) by the Apple authorized repair centre in Hong Kong three days ago. However. i found that there is a problem with the font size of it. It is different from my original one. Either the playlist or the words in the webpages , the font size is not uniform. Most of the words are boldfaced. Sometimes, there are some words are smaller in size. I don't know whether I can or cannot figure out the problem and tackle it, so, should I take it back to the repair centre? Or does anybody help me to fix it or give me some suggestions? Millions of thank.

What language is set in Setting>General>International?
Have you tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factoery defaults/new iPod

Is it possible to change the font size and weight in an ADF table?

Is it possible to change the font size and weight in an ADF table? I have tried to change the various font size and weight settings for a table and its columns and they seem to have no effect on the font size or weight in a table row.

You would use skinning to modify font-size & weight for the table.
In addition to the link suggested by Vinod,
Take a look at http://biemond.blogspot.com/2009/01/adf-skinning-in-jdeveloper-11g.html
Thanks,
Navaneeth

How can I change the font size on the post of WordPress?

I have found three websites which address WordPress style sheets:
Playing With Fonts: http://codex.wordpress.org/Playing_With_…
Font Size and Color: http://en.support.wordpress.com/editors/…
How to Change Font Size In Wordpress: http://www.ehow.com/how_5469172_change-f…
Here are the instructions from the third website above:
Things You'll Need:
Site designed in Wordpress
Administrator access
Step 1
First, to change the font size on a Wordpress site you need to log into the site as administrator. If you do not know how to reach the login page, simply add "/wp-login.php" after the "www.url.com" address. Then login using the admin sign in.
Step 2
Next, get to the Wordpress file editor by going to Appearance->Editor.
Step 3
Once in Editor, identify the Stylesheet file (style.css) and click to edit. This is usually located on the right hand side under the "Styles" heading.
Step 4
Once in the style.css file, you want to conduct a search for "fontsize". This parameter is used throughout the style.css file and is the parameter used to control font size. Next to "fontsize" you will see something like "16px". Simply increase or decrease the "16" to change font size. The tricky part is to figure out which "fontsize" you want to edit.
The way to do this is to first look at the heading it is under. If it is under "comment-template", it is obviously related to either the font size of the comments themselves or perhaps the comment form or the date/time stamp of the comment.
It may take a little trial and error to find the right "fontsize" to modify. Simply modify the one you think is correct and in a separate window, reload the page with the font you are looking to modify. If it did not change, undo the previous edit and try a different "fontsize".
I went to the Dashboard and clicked on the “Appearance” icon on the left-hand side, and then clicked on editor. I clicked on Stylesheet (style.css), but I have not been able to find the “fontsize” that would change my post font size. As the author writes: "The tricky part is to figure out which "fontsize" you want to edit." Some of the font sizes are given as a percentage, and I don’t know if these come into question, i.e., if I should try changing one of these to see what happens.
The end result is that I still have not been able to change my post font size, other than by using the Heading-1-through-6 option, which, I understand, is not the best way to do it.

From John Waller: “If you're using IE8, hit F12 to launch Developer Tools which give you a point and click method of locating the relevant CSS rule on screen.”
I have Internet Explorer 8 (IE8) so tried this method.
This sounded like another promising possibility; however, I have not been able to change the font size in my post using this method.
I have gone to Dashboard > Posts > Edit > then moused-over my post > clicked on "edit" and then hit F12. An enormous amount (20 pages or more) of CSS appears. I tried picking out the font size that I thought pertains to the post (under Text Area), and I have changed the font size from 13px to 24px; however, I have not been able to “save” the new setting. When I go back to it, it is back to 13px.
As a result, I have not been able to use a trial-and-error method to establish which font size I must change in order to change the font size of my post.

How do I change the font size of a data point label on a cfchart?

I know I can control the x axis and y axis font with the font="" attribute of the cfchart tag. But I want to change the font size of the data label in the chart series. Is that possible?

To specifically and fully answer your question, no, you absolutely cannot change the “font size” as a function of print.
First of all, there isn't a single “font size” associated with a PDF file (and we assume you are referring to a PDF file since this is an Acrobat forum).
Secondly, PDF is a final form file format meaning that the content is static in terms of location, size, etc. on the page. To change the point size of any particular text, you really need to go back to the source document and make the changes there.
- Dov

Is there any way to change the font size of the text in the Finder Sidebar?

This may sound like a bit of a dorky question but here goes nothing...
I am rather near-sighted and in need of new glasses but I am stuck in a holding pattern until I can get a referral to see my eye doctor. Anyway... I have found myself using the Zoom features far more often and increasing the font size in the Finder for the Item Names & Info.
The problem that I am facing now, is that the font size of the text in the sidebar is FAR SMALLER than the font size of the text of the actual file names & info.
+*IS THERE ANY WAY TO INCREASE THE FONT SIZE OF THE TEXT IN THE SIDEBAR??*+
So far I have looked in:
*The Finder Preferences
*The Desktop Preference Pane
*The Appearance Preference Pane
*The Seeing Tab of the Universal Access Preference Pane
And to add to my frustration I have also searched the Mac OS X Help AND all of the posts in this thread (back to 1/1/09) that had the word "sidebar" mentioned in them!!
+*DOES ANYBODY HAVE ANY OTHER IDEAS?? OR IS THIS ONE AREA THAT I AM OUT OF LUCK BECAUSE APPLE DIDN'T FORESEE THIS ISSUE??*+
Usually, Apple is really very good about foreseeing any possible trouble (ESPECIALLY when it comes to the area of Accessibility for people w/ disabilities!!)
I do hope that SOMEBODY can help me on this one!!
Also, I noticed that the size of the text that is on the Toolbar is also the same ITSY BITSY font size as the text on the sidebar, but I am guessing that there is next to nothing that can be done about that!!
Thanks a Million!!
+~Kathryn A.+
P.S. Here is the link to a screenshot that I took that will illustrate my problem more clearly...
Icon View Screenshot: http://screencast.com/t/gzDONwN3

Hi! The only way I know of is changing the screen resolution. Tom

How to change the font size in sap scripts?

hi friends,
i had a query regarding to SAPSCRIPT.
how to change the font size of a text in sap script form in which it should change it dynamically.
is it possible to change the font size dynamically in scripts.
one more query regarding to this only.
i need to get the hard copy of a script .
what is the transaction code to get the hard copy?

Hi venkata,
You can specify the font size either in the Character format or pharagraph format.
You better decide it according to your requirement. If you want to apply the same font size for the entire form create the Paragraph format and give the paragraph format in the default paragraph format.
If you want to apply that to limited text, then create character format.
The process of creating it is just after going inside paragraph format click EDIT-> Create Element and give the font size.
This applies for character format also.
Reward points if useful.
Thanks,
karthik

Is it possible to change the font size of the PO terms only in the email?

Similar Messages

Maybe you are looking for