Is It Possible To Change The Name Of My Ipod

Under the Summary tab when iTunes opens, it shows the name of my Ipod. Is it possible to change this name as it shows my name before I got married recently?

Connect your iPod to your computer, when it appears in the iTunes source list click on it's name once to highlight it.
Click on it's its name again.
The text box will open for editing.
Type a new name.
Have a look here for more: How To Rename your iPod

Similar Messages

  • Is it possible to change the name of a report thanks to the report painter

    Hello,
    Is it possible to change the name of a report thanks to the report painter GRR2?
    Thanks!
    SB

    Hi,
    First of all, it's possible to change a report description(title), if that what's you mean. If you want to change a code(name), then indeed you have to copy your report under a new name. To delete the report, first delete it from the report group (via GR52) and then you will be able to delete it.
    Regards,
    Eli

  • Is it possible to change the name of the characteristic after the PA is act

    Is it possible to change the name of the characteristic after the PA is activated?
    If yes what should I do?

    Hi,
    yes its possible and it works in the same way as the creation of a new characteristic / assigment to an up- and running operating concern.
    Thats because the "name" of a characteristic is not stored in a text table but it is the field label of the data element.
    Search in the SDN forum if you are unsure how to do that.
    Best regards, Christian

  • Is it Possible to change the Name ' ASRL3::INS​TR' to COM3 instead, in a' VISA resource name' Control ?

    Hi all.
    Is it Possible to change the Name ' ASRL3::INSTR' to COM3 instead, in a' VISA resource name' Control.
    see attached  pic.  is there a control  propertie that can change this View eks.  "ASL3::INSTR"  To "COM3"?
     HFZ
    HFZ
    Attachments:
    VISA INSTR.JPG ‏12 KB

     With Measurement&Automation explorer you should be able to modify the serial port ALIAS to "COM3"
    see jpg
    CLD - Labview Certified Developer

  • How can I change the name of my ipod touch?

    I want to change the name of my ipod touch so that it shows up in itunes as a different name than it currently does. How do I do this or is it not possible?

    No you don't!
    Go to Settings >Genreal> About>Name.  Next to this you should see the existing name.Just click and type!

  • How do i change the name of my ipod without going on itunes?

    How do i change the name of my ipod without having to go on itunes and change it. i dont have a computer so i cant change it throught my itunes.

    Without a computer to run iTunes, you are basically hosed when it comes to doing anything with your iPod.
    Allan

  • How do I change the name of my ipod nano 7th generation?

    How do I change the name of my ipod nano 7th generation?

    Select it in the iTunes sidebar, click on its name, and type a new name. If you're using iTunes 11, choose to show the sidebar from the View menu.
    (73513)

  • How do I change the name of my ipod. My husband gave me his. Help please and thanks!, How do I change the name of my ipod. My husband gave me his. Help please and thanks!

    How do I change the name of my ipod? My husband gave me his old one. Help!!! Please and thank you!!!

    Open itunes, plug in ipod.
    Look under devices on the left hand side and double click the name and type whatever you like.

  • How do I change the name of my iPod touch so it shows the new name in Itune

    How do I change the name of my iPod touch so it will show a new name in Itunes? I put the wrong name on it and want to have it show the correct name?
    Any help would be appreciated!!
    Thanks!!

    Hello
    Information on changing iPod Name is documented below.
    http://support.apple.com/kb/HT1789

  • HT3965 change the name of my ipod

    How do I change the name of my iPod in the newest version of iTunes?  It's not as intuitive as it was in the older version where you simply clicked on it. 

    Go into Settings-->General-->About-->Name and type in your desired name

  • HT3965 How do you change the name of an ipod nano (6th gen.) in iTunes 11?

    How do you change the name of an ipod nano (6th gen.) in iTunes 11? Note there was an explanation for iTunes 10, but the software does not work the same way in iTunes 11.

    Click the shaded box on the top left on itunes 11. Then click show menu bar. From there click the one that says view on the menu bar. Then click show sidebar. Then click on the devices name when connected. Click change device named.

  • Changing the Name of you iPod

    This may be a dumb question but can you change the name of you iPod? I got a new one and I am giving my mini to my brother and he would like the name of the iPod to be changed. Thanks!

    Select the iPod in the iTunes source list, click on its name, and type a new name.
    (27830)

  • Possible to change the name of shared folders?

    I deleted the original shared public folder that looks like "User's Public Folder". When I went to add the Public Folder back it ends up being shared with the name "Public". Is it possible to change this name to something more descriptive? I have several Public folders being shared (several accounts on the computer) and having them all shared as Public makes it a bit hard to determine which account's Public folder you are looking at. Does anyone know how to change the name?

    Okay, after some searching around, I figured it out. Primarily I got most of it from here: http://discussions.apple.com/message.jspa?messageID=6266526 , but I added something else to make it work better. The linked post mentioned that they got it to work so you can see "username's Public Folder" when someone file shared from another Mac, but in the Sharing Preference, it would still read as "Public". Well I managed to figure out how to fix that too. Bare with me.
    1) Make sure the Public folder in question is set up to be shared in the Sharing Preferences
    2) Go to System Preferences > Accounts
    3) Control Click the username in question and click Advance Options.
    4) Copy the data (the bunch of numbers & letters) from the UUID field. (you'll need it for later, save it to a txt file temporarily, you'll be overwriting your clipboard later)
    5) Close System Preferences
    6) From the Finder Menu click "Go" > "Go to Folder..." and enter this /var/db/dslocal/nodes
    7) Then do a "Get Info" on the "Default" folder and allow EVERYONE read+write access
    8) Do the same for the the following two folders, CONFIG and SHAREPOINTS
    9) "Get Info" on the "Public.plist" file and allow EVERYONE read+write access (BACKUP THIS FILE)
    10) Rename the "Public.plist" to "Username's Public Folder.plist"
    11) Open the file in a text editor and change every instance of "Public" with "username's Public Folder" (except for <string>/Users/USERNAME/Public</string>. Thats the actual folder location you don't want to change that.
    12) Now what you need to enter this
    <key>sharepointaccountuuid</key>
    <array>
    <string>NUMBER</string>
    </array>
    It goes between <key>name</key> & <key>sharepointgroupid</key> sections. It should look like the following:
    </array>
    <key>name</key>
    <array>
    <string>Username's Public Folder</string>
    </array>
    <key>sharepointaccountuuid</key>
    <array>
    <string>NUMBER</string>
    </array>
    <key>sharepointgroupid</key>
    13) Now Paste the UUID number you got before where I have NUMBER written above. Make sure the line spaces and indents match the other entries on the file.
    14) Save the file and change the permissions to your new "Username's Public Folder.plist" and the other folders you changed back to EVERYONE "no access".
    15) Now the link said to restart File Sharing. I decided to reboot for good measure.
    Once done you should see "Username's Public Folder" in the Sharing Preferences and when other Macs try to file share.
    Works perfectly for me, and I hope that works for you too!

  • Is it possible to change the name of my podcast?

    I want to change the name of my podcast. Is it possible? Please help.

    This depends on the situation. If you were hand-writing the feed (which I assume you aren't) you could just change the 'title' tag. Some podcast creation programs or online service will let you change the podcast name, and doing that and re-publishing will get your name change onto the Store after a couple of days.
    However, some programs or services create the feed with a file name which is drawn from the title. If you change the name you will change the feed URL and then iTunes won't know where to look for it and your podcast will cease to update.
    So you need to take that into consideration before changing the title.

  • Is it possible to change the name of the application in webdynpro

    Hi ,
             I created one application with 2 views .It is running perfectly.Now the problem here is i want to change the name of the application.Is it possible to edit the name of an application
    Regards
    Padma N

    hi,
       I want to create an application with name Z_XXX but while running the application it has to show only XXX at the top of the Application window
       i dont think which u have mentioned is possible or Even i may be ignorant in that.
    better give the Application name as XXX instead of Z_XXXX
    Thanks and reagrds
    Fistae

Maybe you are looking for

  • Using 32 bit integers

    I need to use a 32bit integer in my app, but Java Card only supports 16 bit integers. What's the best way of handling this? I've been trying to do it with a 4 byte array but I'm having problems add/subtracting. I've made the following function to add

  • Report Group 1SIP Consistency Check

    SAP reccomends the following to be consitency check for CO customers for system copy: "CO customers: An additional consistency check can be performed by running the report group 1SIP before the system copy in the source system, as well as after the c

  • Unlike IE When back button is pressed it takes too long. pleas do something for that. thnx.

    Unlike IE When back button is pressed it takes too long. pleas do something for that. I like firefox and i get to use the back button more often. thnx

  • How can I turn this line and its intersection into a separate object?

    My initial object is #1, then I draw a line on #2. How can I turn the highlighted area into a separate object? (I cheated and filled this area with Photoshop, but I'd like to know how to turn this red area into a separate object so that I can fill it

  • SICF- only in display mode

    Hi all, I want the tcode SICF to be in display mode alone. Under which authorization object it comes? Can I make only in display mode. Regards, R.Suganya