Is it possible to change the number of weeks to be displayed in the month view in calendar (mavericks)?

I'd like to know if it's possible to change the number of weeks to be displayed in the month view in calendar? Thanks!

No.
There are up to six calendar weeks that might be used to display the 31 possible days in a month.
So the month view displays six weeks.

Similar Messages

Smartforms table: how to fix the number of rows to be display in the table.

Hello.
I´m having problems with a smartform. I have defined a window with 7 cm high. Then I have define a table to print the content of a table.
I'm using the header, the main area, and the footer. It seems to be ok. But the main area is sizeble. I mean, that if in the table has 2 records, it dispaly the 2 records and inmediatly display the footer. It probably use only 3 cm of the 7 cm defined for the high of the window.
And I want that the footer of the table would be display at the end of the 7 cm of the window. Is that posible ?
Please, tomorrow we will have our kick off the module and this is the last issue we have.
Thanks in advance for your help.

Better idea wud be to create a WINDOW, just Below you Main window (After table) ..
In Form Layout (Form Painter) you can fix this Window on any place , Pass the FOOTER text node over there .. So you will get a Static FOOTER diplay ..
That what you need ?? Let me know
Edited by: Lokesh Tarey on Jul 22, 2010 7:15 AM

My calls wont go through and and the number and four others are displayed at the top of the screen

I already posted it once. What happened?

If you can't connect to celluar data, you'll need to take that up with AT&T.

How to determine the number of rows to be displayed in a report

hello experts,
Has anyone ever come across this requirement before? Before a report finishes being executed and before it displays the results, is there a way to determine the number of rows to be displayed as the result?
Many thanks in advance.
Regards,
Inma

Hello Arun,
Thanks for your reply but do you know which method I should use for this purpose if I use the table interface?
Thanks,
Inma

How to limit the number of characters a label displays?

Can someone please tell me how I can limit the number of characters a label displays from the text property?

Ok. What I am trying to do is display a number with the format
x.yy
I need the display to show all characters all the time. For example let me show you what I currently get and what I require.
Current     Require
0               0.00
0.1            0.10
etc
To me its like the label is truncating the number appropriately and I dont want it to do that. I need a fixed 4 character format.
Hope this clears it up.

Is it possible to change the number of rows to be displayed in adf query ?

Hello,
is it possible to change the number of rows that are displayed in an adf query similar to an adf form ?
I need to display approx 5 rows per column instead of displaying all the fields in a single column ? Thanks.

Thanks , how do you add in the code ,is it something like follows :
<af:query id="qryId1" headerText="Search" disclosed="true"
                            value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
                            model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
                            queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
                            queryOperationListener="#{bindings.ImplicitViewCriteriaQuery.processQueryOperation}">
                    <af:inputText value="#{bindings.PrtDesc.inputValue}" label="Desc"
                                  required="#{bindings.PrtDesc.hints.mandatory}"
                                  columns="#{bindings.PrtDesc.hints.displayWidth}"
                                  maximumLength="#{bindings.PrtDesc.hints.precision}"
                                  shortDesc="#{bindings.PrtDesc.hints.tooltip}" id="it3">
                      <f:validator binding="#{bindings.PrtDesc.validator}"/>
                    </af:inputText>
                  <af:column>
                   <af:outputtext/>
                    <af:outputtext/>
                 </af:column>
                  </af:query>

Is it possible to change serial number in FCP?

I have two licenses of FCP. Just installed on a new Mac Pro, and I installed with the wrong serial number (which results in protection error when both FCP programs are open). Is it possible to change serial number without reinstalling (takes hours..)?

Further to my above comment Tom, I have done a quick test.
Removing the FCS System ID had no apparent effect on launching FCP.
Removing the ProAppsSystemID brought up the serial number etc. window.
Any idea why I have got 2 of these things?
Anything to do with having FCE installed as well?

Error: List View Threshold. The number of items in this list exceeds the list view threshold, which is 5000 items.

Hi, i had created a SharePoint List in cloud ( office 365) using List Template.
List template contains 12000 items taken as template from SharePoint on Premise.
I am getting this error message, in SharePoint Online (Office 365)
The number of items in this list exceeds the list view threshold, which is 5000 items. Tasks that cause excessive server load (such as those involving all list items) are currently prohibited.
How to resolve it, to get data in my SharePoint list, any help will be appreciated.

With O365 lists over 5k items are now officially supported but they will have limited behaviour due to the threshold. There are no workarounds or options to increase the threshold either temporarily, for specific users or for the list itself as you have
with on-prem.
You'll need to remove enough items to get it below the threshold limit, add indexed columns to support indexed views, then re-add the items again. This article is for 2010 but the section around indexed columns and views is still accurate:
https://technet.microsoft.com/en-us/library/cc262813(v=office.14).aspx
It may be possible to add the indexes on your on-prem list where you can increase/avoid the threshold, then re-export the list. That would rely upon the list creation script adding indexes before it uploads items but it's a logical assumption.

HT4623 I received a ticket iOS diagnostics ticket number 72181, however every time i press quick test. It says the ticket number was not found. Verify the number and try again. But that the ticket number i received.

I received a ticket iOS diagnostics ticket number 72181, however every time i press quick test. It says the ticket number was not found. Verify the number and try again. But that the ticket number i received.

I have never read so much information. There is no charge to change your cell number. However only the account holder can log in to My Verizon Web Portal http://www.verizonwireless.com and click on her second line (your phone should be shown)
I cannot fathom unless your sister gave you account access the ability to pay each line separately.
Just pay your sister and have her pay the complete invoice when due. Problem solved.
You could also to an assumption of liability on that second line on your sisters account. Call *611 or 1-800-922-0204 and make sure your sister is right there with you to do this. Then the line comes off her account and you can then set up your own account with verizon.
You can also switch to T-Mobile now and they will pay off that early termination fee and give credit for your old verizon device, but you have to buy a new phone over time payments from T-Mobile. Please note a hard credit check will be done by verizon if you break off of your sisters account for one of your own, and T-Mobile also does a hard credit check before they provide service. http://www.T-Mobile.com
Good Luck

Can I change the way iCal displays events in Month view?

I don't like the way iCal in the new OS displays events in Month view. It's counter intuitive to have the time of the event be at the far right and grayed out. I find myself staring and slowly scanning down the display just to find out when I have to be at an appointment. I wish they had stayed with the other display, not only was it much clearer, it also word wrapped so you could see the entire description. I have blank space at the bottom of the day, and at the same time missing information because of the lack of wrapped text.

Hi Daniel,
The option you have there is to change the calendar of the event (currently the "University" calendar in your screen shot) not the colour. It is the calendars that have colours in iCal not the events.
To change the calendar colour in OSX 10.7:
Click Calendars (in the top-left corner of the iCal window), and select the calendar by clicking its name in the Calendars pop-up list.
Choose Edit > Get Info.
Choose a new colour from the pop-up menu in the top-right corner of the Info window.
To customize the colour, choose Other, and then make your colour selections in the Colours window.
I hope that helps.
Best wishes
John M

Limiting the number of files being picked up by the sender file adapter

We are running a file adapter to collect xml files from a legacy system in a shared network location. The files are picked up, information is sorted and mapped, and then sent to a proxy on our CRM system to store the data. Very simple and not-complex.
Our initial data load will consist of somewhere in the neighborhood of 900k records, which is killing CRM.
A co-worker with a bit more experience was telling me that he believes there is a way to limit the number of files that will be pulled per iteration of the file communication channel. If this is the case, can someone share with me the parameters that need to be set?
My apologies if this is a duplicate post - I have tried to look for a good answer in the forums and have come up empty.
We are running PI 7.1, and I believe it is SP 6.
Thanks in advance for the help,
Ben

Hi Ben,
There is no standard way to limit the number of files to be processed by the communication channel.
On the Sender File CC, there is a parameter " Maximum File Size" which restricts the files bigger than the specific size, but this is just a prevention not a solution.
If you have a single big size file, then somehow you have to create small sized files out of it.
Thanks,
Pooja Pandey

Want to change my16giga byte ipad mini with retina display to the 32giga one because i think its capacity is insufficient. So could i change to 32giga by giving an extra charge. I bought 16giga ipad mini on thanksgivingday, maybe 30. November

I want to change my16giga byte ipad mini with retina display to the 32giga one because i think its capacity is insufficient. So could i change to 32giga by giving an extra charge. I bought 16giga ipad mini on thanksgivingday, maybe 30. November

If bought directly from an Apple Retail store or Apple Online store, and is still within the 14 day return period Apple Offers you can take it back and get a full refund which you can then use towards buying the other version.
If its already past the 14 day period then you won't be able to return it for a refund no.
If you did not buy it from an Apple Retail store or Apple Online Store you will have to consult with the store you bought it from about their return policies.

How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

Hello,
I apologize for submitting this question. Soon after I posted it I saw a similar question that had my answer..
Again, my bad for not looking first.
Ron Morris

Where do I find the "number of apps to update" button on the new iTunes?

I can't find the "number of apps to update" option in the new iTunes. Where has it gone?

Hi Janice
If you are talking about the Hard Drive, click on the Hard Disk on your Desktop to highlight it and then from the Finder menu > File select *Get Info*. You can also press Command + i to get the same dialogue box to open.
There you will see, the Capacity of the Hard drive, how much is used and how much free space remains.
If you are talking about the RAM, that shows in the first opening window of System Profiler.

I am having trouble activating my new version of Lightroom on one computer where it says it has been fully installed and it is stuck on 90% on my laptop. I tried phoning the helpline but was told the number dialled was incorrect but it is the one given o

I am having trouble activating my new version of Lightroom on one computer where it says it has been fully installed and it is stuck on 90% on my laptop. I tried phoning the helpline but was told the number dialled was incorrect but it is the one given on the Adobe help page. So what is the correct tel no for support?

carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

Is it possible to change the number of weeks to be displayed in the month view in calendar (mavericks)?

Similar Messages

Maybe you are looking for