Is it possible to change the orientation with the Ken Burns effect?

Friends,
I would like to change the orientation of the Ken Burns effect for a particular photo that I've insterted into a movie. In other words, the KBE crops the image in landscape mode -- I'd like to crop it in portrait mode (which is how the photo was taken). How do I do this?
Thanks!
Steve

Tom,
You broke my heart, but I figured out a way around it using cropping and keyframes.
Thanks!
Steve

Similar Messages

How can I modify the Fit, Crop, or Ken Burns effect for the entire movie?

How can I modify the Fit, Crop, or Ken Burns effect for the entire movie? I've been having to go through them all individually which takes forever.

You could try Edit > Select All then click on the crop button and change the setting from Ken Burns to Fit.
I find that this only works if you do not have the Automatic Cross Dissolve transitions in place.
If you do, File > Project Theme and uncheck the transitions and remove them.
After you have changed from Ken Burns to Fit, you can re-apply them.
Easiest way in future is to set up your project (File > Project Properties) before you start adding photos.
z.

Pausing at the end of a Ken Burns Effect

Hi,
I have a number of photos that I am using within imovie. I am applying a Ken Burns effect to scroll or zoom on the photo. At the end of the effect I would like the photo to pause.
The viewer would see a photo, the zoom/scroll get to the final position, then the photo held for a couple of seconds.
Is there a way of acheiving this - i know i can import the photo twice, the first doing the effect, the second with no effect - but how do i get the second photo exactly the same as the first photo after effect?

I don't understand what "Option-click" means: how is this executed? I
Hold down the Option key on the keyboard, then click on the Start end of the Start/End thingy. In this context, Option-clicking applies the End settings to the Start, so the clip no longer has an animated zoom.
I also don't see how one selects the duration of the "pause".
The whole clip we're making is the pause. It's a second clip that plays after the first (zooming) clip. These directions create a second clip that "pauses" after the first clip zooms.
Option-dragging the first clip makes a copy that we change into a pause. (Holding down the Option key and dragging the clip to another location duplicates the clip.)
Hope it makes better sense.
Karl

Not happy with slideshows / Ken Burns effects / lesser quality in iDVD

I am a new iPhoto user, having created my first slideshow of old photos to play at my mother's 80th birthday party this week. The whole process of arranging photos, testing visual effects and adding music went swimmingly! BUT (!!!!) I am hugely disappointed now that I've rendered the show through iDVD.
-- The Ken Burns effects keep changing! Once a slideshow was created and the Burns effects seemed perfect, I sent that show to iDVD. But viewing the project once burned to DVD, I see that the cropping, zooming, etc. are all different. Is there a way to "save" a show and maintain the effects?
-- Moreover, the crystal clear image sharpness and clean edges seen when viewing a slideshow in iPhoto are "dumbed down" once the show is sent to and rendered in iDVD. Even at the "quality" setting, moving effects look raggedy-edged. This really makes me unhappy.
Any thoughts or ideas to share on this? Thanks.....

SixPack:
Welcome to the Apple Discussions. As TD pointed out, making a QT movie file of a slideshow involves rendering which is then encoded once again in iDVD. IMO, the best image quality for a slideshow is obtained when you create the slideshow entirely within iDVD. Of course there's no KB effect.
If you create the show in iMovie you can get around the double encoding by closing iMovie once the slideshow is finished. Then open the iMovie project file/package (Option-click on the project file and select Show Package Contents option), find the iDVD folder and drag the .mov file in it into the open iDVD window. This will let iDVD do the rendering of the various transitions and special effects and provide a better final product.
You must remember that iDVD's final resolution is only 640 x 480.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Limited ken burns effect and exporting out the slide show

im trying to create podcasts of photos ( perhaps 50 )
with OPTIMAL ken burns effects panning and zooming
with my own musical scores using garageband. Using transitions and Voice overs and eventually uploading to a web account with iweb.
Is it better to create this all in imovie?
Iphoto is too limited with its very limited KenBurns effect.
I also dont see the individual time setting option for each image. where is that in iphoto. It seems that every photo has to be the same duration.
some have recommended iphoto then garageband
but i see too many limitations with iphoto.
anyone have similar experiences?

Yes you can do this with vertical photos.
Click on the little icon at the top left of the photo thumbnail in your project. This will bring up the photo editing panel.
If you want the vertical photo to show up full screen, click crop, and pick which portion of the vertical photo you want to show.
If you want to see the entire vertical photo, click "Fit" and the entire photo will be shown, but there will be black space on either side.
Now click on "Ken Burns" to add the motion effect.
When finished click "Done".

What are the possible reasons why I cannot reactivate using my AppleID, even though I already change its password with the help of Apple personel

What are the possible reasons why I cannot reactivate my Iphone5 using my AppleID, even though I already change its password with the help Apple personel

If the password for your Apple ID works at id.apple.com > Manage Apple ID, then it's likely that the Apple ID the device wants you use is not the same as the Apple ID you are using.
Exactly what screen are you at on your iPhone? It sounds like it is in Activation Lock.

Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.

Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
Best of luck.

How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or password. If I delete my apps and start over, I may lose the apps that I purchased...

How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....

Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well.

HT1212 Is my screen supposed to change from the screen with the charger and the iTunes circle to my lock screen while it's in recovery mode?

Is my screen supposed to change from the screen with the charger and the iTunes circle to my lock screen while it's in recovery mode?

Is Find My Phone turned on, on your phone? If so, eject from iTunes, login to iCloud.com, locate your phone, then erase it.
Does the same thing...removes the passcode. Then, either restore from backup, or setup as a new device.

I am setting up ipads for use in an elementary, and I would like the "home screen" to be the apps, rather than the default with the chat, mail, etc icons. how do I change that?

Can anyone answer this question?
I am setting up ipads for use in an elementary, and I would like the "home screen" to be the apps, rather than the default with the chat, mail, etc icons. how do I change that?

Depending on exactly what you want to do, there are a couple of ways of handling this. You may want to access teh user guide for some ideas: http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
In particular, check the sections on Customizing iPad and Settings > Restrictions.

Is it possible to play civilization V with the macbook air

Is it possible to play civilization V with the macbook air

Civ V system requirements: http://www.aspyr.com/product/game_specs/125
Check against the tech specs of your MacBook Air http://support.apple.com/specs/#macbookair
Stefan

It is possible to include the jre(not the installer) with the application?

Is it possible to include the jre(not the installer) with the application, so that the application will run on its own jre.??
If so please provide me instructions,how to do it.
Thanks
Isma

See http://java.sun.com/javase/6/docs/technotes/guides/deployment/index.html

How to change a connection with the database in Runtime?

How to change a connection with the database in Runtime?
My connection was made using ADF Business component (ApplicationModule).
ADF Swing.
JDeveloper Studio 11.1.1.4.0.

When deploying ADF applications with database connection, you should be using JDBC data sources configured in the weblogic server.
You could change the JDBC data sources to a different DB instance or location - by changing the JDBC data source and restarting the weblogic server.
For more details, check
http://techiecook.wordpress.com/2010/12/02/oracle-weblogic-adf-datasources/
Thanks,
Navaneeth

Changing tab focus with the keyboard

I've read about changing the tab focus from one page to another programmatically; however, I would like to have shortcut keys to change tabs (like many programs that use CTRL+Tab to change windows within the program).
I could use an event structure to capture keyboard button presses and then change the value of the tab control, but is there a more straightforward approach?
Thanks!
mlloyd

You can set all other controls not to be tabbed through and the tab control to have its pages tabbed through. That way, when you use tab, only the tab control's pages will be on the tabbing list. This, however, is probably less straightforward.
I'm not sure what's the problem with the method you outlined. In most cases, if you want something to happen, you will have to code it. This appeares to be one of those cases. You can make a subVI to do the tabbing for you, if you don't want to have to code all of it in your VI. Pass the reference of the tab control into the VI after you detect the event and use that to decide whether to increase or decrease the tab value. Be sure to cycle the number back to the first page when it reaches the end.
Try to take over the world!

Is it possible to change the orientation with the Ken Burns effect?

Similar Messages

Maybe you are looking for