Is it possible to change the Presets Scripts Folder Location?

Hi,
I work with Photoshop on a daily basis for my job, but my company has the C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Presets\Scripts folder admin-locked (due to it's location in the Program Files folder. I've already asked IT, but they told me that they are unfortunately unable to give me access to that folder because my user profile can't be given admin-rights (due to company policy). I'd really like to change the location of the scripts folder so that I can add some scripts of my own to be able to use in Photoshop.
Is this possible or is there any sort of workaround?
Thank you all in advance!

You can always use browse to go to a different location - I know it's not ideal, but it does tend to remember that folder once you navigate to it. I would push your IT people about getting you access to that folder. I also work in for a company that severely limits access to program files, but I made my case that I need to have access to the Photoshop subfolders to do my job. They should be able to grant you access to just that folder.

Similar Messages

I just installed iTunes on my computer, where I already have all my music. I went to Edit Preferences Advanced, and changed the iTunes Media Folder Location to where I have all my music, in the "Local Disk." But iTunes wont import all my music. Help?

I just installed iTunes on my computer, where I already have all my music. I went to Edit > Preferences > Advanced, and changed the iTunes Media Folder Location to where I have all my music, in the "Local Disk." But iTunes wont import all my music. Help?

Have you looked in the Music App on your iPhone? On the iPhone music is played by the Music App not iTunes.

Can I change Illustrator's Script folder location?

Is it possible to change the location of where illustrator looks for scripts, or is it possible to add a location?

Not sure if it is possible from what I have seen. But I could be un/misinformed. ;-)
You can have a slug script per say, that is merely used as a reference file, that uses an #include statement to reference a script location.
// Example:
#include /origPath/subPath/continuedPath/blahBlah/fileLocation/scriptName.js
I did also see the following, which talks about going in and manually altering presets, which may be an option but not too simple to maintain perhaps. If it does work let us know.
http://forums.adobe.com/message/4753174
Hope something proves useful, keep us posted.

Possible to Change the Plug-Ins Folder Used by Safari?

I'm trying to set up Firefox with no plug-ins and Safari with plugins, to switch back and forth as needed.
Both want to use the same Library/Internet Plugins folder.
Any way to alter the plug-ins directory for either of them?
Is a Unix command going to come to my rescue to set Safari's plug-ins path?

I would expect both applications to call the same system command to locate the plugins directory. It's not going to be as straightforward as a string of text in a preference file.
The only way I can see this working is to move the plugins in/out of the plugins direcotory before you launch each app. Of course, that may be problematic if you want to run both browsers at the same time.
If you want to run both browsers at once, one thing that might work is changing the plugins directory mid-stream. Most apps will only check for plugins during startup (which is why you usually need to reboot to activate new plugins). Therefore you may be able to move your plugins out of the directory, launch FireFox, move the plugins back and launch Safari.
In this setup Firefox should see no plugins and Safari sees them all. A script could automate this process if it works for you.

How do I change the iTunes media folder Location and save it?

I have a seagate drive where I store my music and have it shared as "M". Each time iTunes starts up, it defaults back to C:\...... and if there is a device connnected, it transfers the purchases from that device to this directory.
I need to manually go in and change the location each time iTunes starts. Is there a way to save this location as the default? I am on Version 10.
thanks in advance

If iTunes starts up and it can't get access to the location that you have declared as the media folder it will revert to the default subfolder of the library folder. Any downloads or rips will be put in that location until you correct the media folder location via Edit > Preferences > Advanced.
Either make absolutely certain the drive is active and available before starting iTunes or place the library folder on the other drive as well (see this post) so that iTunes either opens normally or warns that it cannot find the library. Note if this is a networked drive rather than locally connected USB/SATA there may be noticeable performance issues with the latter solution.
tt2

Is It Possible To Change the Order of Folder in Local View (i.e. Move Up or Down?)

Hi,
This would make it easier for me to locate files.
I am not sure when I was creating folders in what order they appear in my root folder

Unfortunately the lists are only allowed to be ordered by the headers (name, size, type, modified, check-in/check-out). If you would like to see more options available please submit a feature request to Adobe. The more detail you can provide the more likely your request will be looked at for future consideration:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

How do we change the default profile folder location?

I work for a university in Manhattan. We are trying to install Firefox 5 for our users but Firefox profiles are stored in the AppData folder which is a problem for us as it exceeds the user profile space.
We need a way to have Firefox create the profile elsewhere. Is anyone aware of how to do this?

Hi,
Thank you for taking the time to offer a solution to our problem. Unfortunately, the Firefox profile information set under the administrative account does not transfer to the user accounts. Even though we created a Firefox profile set to open to a different location, when a user logs in the default profile, located in AppData, is created for them and they do not have access to the new one.
Are you aware of any way to set the profile of each user to automatically be created elsewhere? Thank you.

Is it possible to change the colour of box in script from black to blue

Hi,
Is it possible to change the colour of box in script from black to blue or some other colour and background colour also...if so how....
Thanks.

No..
It is not possible in scripts..
In scripts u cannot use colors..
In smartforms u can do that..
reward if it helps u..
sai ramesh

I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD? If yes, where I find a tutorial about this? Thanks a lot and best regards all.

Hi people,
I'm typing from Brasil, sorry my English.
I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
I intend to keep the original DVD driver and install the SSD in the same HD place.
If yes, where I find a tutorial about this?
And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
What brand and model of SSD do you recommend?
Thanks a lot for now and best regards all.
Carlos Sgrillo
Porto Alegre, RS, Brasil

Tukaine
Sep 23, 2012 10:59 PM
Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
Fixes people have used in the past included:
Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
HDD Fan Control
HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
Instead of HDDFan Control, get the free SSDFan Control
http://exirion.net/ssdfanctrl/

Is it possible to change the page of a linked PDF without relinking?

Is it possible to change the page of a linked PDF without relinking and going through the import options?
I'm trying to import seveeral pages of the same PDF. The process would be quickest if I could import it once, then duplicate the image box a number of times, then just change the page number each image box is linking to.
At the moment I'm having to relink (or place), then go through Import Options, then choose the page - it's a long process that feels like it should be quicker.
Any ideas?
Thanks

The short answer is no, that's not possible, but it IS possible to import multiple pages at one time.
My favorite script for this is from Scott Zanelli: InDesignSecrets » Blog Archive » Zanelli Releases MultiPageImporter for Importing both PDF and INDD Files, but there's also a sample script included with ID.

Is it possible to change the colour of Path segments/lijnes in PS CC?

Hi all,
Is it possible to change the colour of path segments/strokes in PS CC in order to make them more
visible when used in eg B&W pictures??
Thanks in advance!
[Moving to Photoshop forum... JTS]

No..
It is not possible in scripts..
In scripts u cannot use colors..
In smartforms u can do that..
reward if it helps u..
sai ramesh

Is it possible to change the settings in AR Properties Advanced tab with Adobe Acrobat XI?

I noticed when I went to print a PDF double sided, that despite the following the guidelines from Adobe on this process, it still printed single sided. I checked the properties of the PDF itself and on the Advanced tab, the DuplexMode was set to Simplex and was greyed out.
Is it possible to change the settings in that tab with Adobe Acrobat XI?
Regards
Sharon

Dear Sara
Thank you for your reply.
I have two printers, both support automatic duplexing. Any PDF we receive
or create we are unable to print double sided on our mac mini¹s. I didn¹t
make it clear in my question that we were fine on Windows XP, but, having
recently changed to Mac have encountered this frustrating problem.
I did a lot of research prior to recording the question and it appears I am
not the only one who has come across this problem, and I have followed the
guidelines that Adobe promote on their website to be able to print double
sided, which doesn¹t work on the mac mini Osx Mavericks.
Because the Properties, Advanced tab has ³Print Dialog Presets² that are set
to simplex and greyed out I took that to mean that no matter what printer
settings I make, and I think I¹ve gone through all that I can, the pdf will
not print double sided on Mac but will on XP.
Sorry this isn¹t the reply you must have been hoping for and look forward to
receiving further advice in regard to this matter.
Regards
Sharon

Is it possible to change the formatting of Excel in place

Hi,
is it possible to change the standard formatting of columns and texts when using Excel inplace (Excel on the web for the BPS )?
Many thanks,
Simon Cohen

Simon,
I am afraid you can't modify styles using excel in place.
Note 632333 says the following :
List of the features the Excel OWC can use from the template:
Text format - font, size, colour
Cell format - background colour, border, alignment
Number format
"Simple" formulas
Panes Split and Freeze (only for Office versions 2002(XP) or higher)
Nevertheless this applies only for cells which are not filled by BPS runtime. All texts and values written by BPS runtime into the template use standard styles. The styles cannot be changed, see below.
List of features that are not available in the Excel OWC:
Styles. Consequently no changes to the SAP standard styles are taken over to the OWC. Therefore the features mentioned above are available only for the cells not containing a transaction specific data
VB Macros. When needed, the designer can use a script language (VBScript, JavaScript) to access the DOM of the OWC. You can include HTML into a text component in the Web Interface customizing (tn BPS_WB) and place your script code there.
Cell and text formats not mentioned above (e.g. text orientation,...)
Line brakes within a cell
Panes Split and Freeze (only for Office version 2000)
Embeded elements (like form objects, pictures, background picture,...)
Having more than one worksheet in the Excel OWC
In comparison to HTML based planning layouts the Excel layouts do not identify the position of the documents.
Hope it helps,
Alberto

Is it possible to change the wait time for when you enter an incorrect password on your iphone/ipad?

I reaaally hate how anti-procrastination apps like ColdTurkey don't work for apple products, because what's the point of restricting internet usage on the computer when you can just access it from your apple device? There's no point in using the parental controls or setting passwords for obvious reasons, either.
So I had an idea: from what I know, after guessing the password incorrectly 6 times, the device is locked for 1 min, 7 times, 5 min etc. So I was thinking, is it possible to change the settings, for example, to lock the phone for 60min after 3 wrong password attempts? This would be incredibly helpful!!
(if you know a way but don't want to post it here, please email me instead!)

Thanks a lot Rob. That works.
"Rob Woollen" <[email protected]> wrote in message
news:3f29b665$[email protected]..
java -Djava.io.tmpdir=<tmpdir path> weblogic.appc
-- Rob
Bernhard Lenz wrote:
I realized that weblogic.appc creates a working directory
/var/tmp/appcgen
when compiling ejbs. What happens if 2 developers run weblogic.appc atthe
same time? Will they be using the same temp directory and therefore getin
each others way? I'd rather like to create a temp directory which isunique
for the machine. Our build scripts would be able to create such adirectory
but I couldn't find anything in appc to set the temp directory.
Do you have any advice?
Thanks for your help.
Greetings
Bernie

Is it possible to change the system's default font?

It is difficult to explain my question, but is it possible to change the system's default font of the script at the top of all windows, and desktop icons? I really think that would add personality to my powerbook. Thanks for any input.

It is possible, and may be changed using the Terminal if you know the commands. However, the easier way is to use TinkerTool <http://www.bresink.com/osx/TinkerTool.html>.
Enjoy!
bd

Is it possible to change the Presets Scripts Folder Location?

Similar Messages

Maybe you are looking for