Is it possible to change the speed of video in fce like in imovie?

Hi all, just wondering if it is possible to speed up/slow down/reverse video in fce like in imovie. I probably sound like a total noob, but i've only been using fce for a little while and haven't really tinkered around with it all that much. Is it possible?

Thanks man! problem solved!

Similar Messages

  • Changing the speed of video playback

    Hi Gang,
    Just wondering if there is a way to change the speed of video & audio on itunes?
    I know this can be done on iPod with the audio book function, just wondering if there's one for videos?
    Cheers
    Yong-Long

    Do you mean by a strobe effect that the brightness of the footage is changing randomly?
    Or are you saying that the motion of your footage is not smooth and moves with a sort of rhythm that feels jumpy?
    These are 2 different possiblities.
    The odds are you are experiencing field reversal caused by changing the frame rate of your footage and thereby switching the field order in the clips. I've posted many explainations of what field reversal is in past topics so search for the term.
    You could minimize the effect by using the flicker filter in the footage that is being changed. You could also send the footage to Motion and enable Optical Flow in the Time Mapping properties of the clip. But that's a fairly advanced technique. Try the Flicker Filer first.
    Without more info, I can't help you further.

  • I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD? If yes, where I find a tutorial about this? Thanks a lot and best regards all.

    Hi people,
    I'm typing from Brasil, sorry my English.
    I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
    I intend to keep the original DVD driver and install the SSD in the same HD place.
    If yes, where I find a tutorial about this?
    And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
    http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
    What brand and model of SSD do you recommend?
    Thanks a lot for now and best regards all.
    Carlos Sgrillo
    Porto Alegre, RS, Brasil

    Tukaine
    Sep 23, 2012 10:59 PM
    Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
    This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
    Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
    When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
    If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
    Fixes people have used in the past included:
    Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
    Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
    Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
    Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
    HDD Fan Control
    HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
    It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
    Instead of HDDFan Control, get the free SSDFan Control
    http://exirion.net/ssdfanctrl/

  • Is it possible to change the HD ?

    hi there
    1.8" SATA HD 5400 rpm can be now found on some websites
    i was wondering if it's possible to change the HD of the MBA rev B ?
    because even in SATA, the 4200 rpm drive is really too slow
    thx

    Yes, it's possible. Video and instructions litter the web. It's not too hard, it's just not designed for user upgrade, and it will clearly void your warranty.
    If I were you, I'd put a 128GB SSD device in it if you're concerned about speed. 1.8" 128GB SSD are showing up for reasonable prices. 64GB SSDs are downright cheap now. But in an Air, with almost no headroom and limited heat tolerances, etc., I would not put an out-of-spec drive in it. An appropriate SSD will fit the spec.

  • Changing the speed of Ethernet Link of the PC to 10 or 100 MBPS

    Hello,
    I need to change Ethernet Speed of the PC programmatically that is change the Speed to either 10 or 100 mbps.
    Is it possible, If yes , then please let me know the procedure. 
    Or atleast I should be able to read the PC Ethernet speed in LabVIEW.
    Thanks
    Solved!
    Go to Solution.

    You dont need .net 4.0 for this (.net 2.0 is good enough) or anything else installed.
    I have attached a VI with the control.
    PS: If you need to load .net 4.0 assemblies in to LabVIEW, you need to follow instructions in this link:
    http://digital.ni.com/public.nsf/allkb/32B0BA28A72AA87D8625782600737DE9
    Beginner? Try LabVIEW Basics
    Sharing bits of code? Try Snippets or LAVA Code Capture Tool
    Have you tried Quick Drop?, Visit QD Community.
    Attachments:
    network info.vi ‏7 KB

  • Is it possible to change vehicle speed calculation using CAN

    I can retrieve the speed using a PID but is it possible to change the calculation or coefficients of calculation for the speed equation?

    Hi Robert,
    Generally the CAN network is used for sharing information through out vehicles many systems. Some vehicles have reprogrammable controllers, "how" to do this is information that you would have to get from the vehicle manufacture, as they don't usually make that information public.
    Scott M.
    Applications Engineer
    National Instruments

  • Strange strips when I change the speed of footage

    so, i change the speed of footage to 200%
    and what i get:
    http://img848.imageshack.us/img848/9074/screenshot20110409at457.png
    sequence settings:
    http://img832.imageshack.us/img832/5089/screenshot20110409at503.png
    is it possible to avoid this?
    tnx in advance!

    i found the answer
    field dominance should be "none"

  • How can I change the speed of a stepper motor?

    HSI bipolar Linear Actuator Size14, HSI Chopper Driver 40105, NI PCI-6052E, NI SC-2345, 2 SCC-DO01 modules, and SCC-FT01
    The motor works at one speed with a boolean array input, using the SCC-DO01.  But I need to be able to change the speed of the motor.  Specifically it needs to operate on several frequencies of functions of as displacement vs. time, such as sine wave, triangle wave, and square wave.  I tried to find information about using a digital pulse train but had no luck.  Is it even possible to accomplish with this hardware?
    Message Edited by Draben on 01-22-2006 09:43 PM

    In general E-Series DAQ-boards like the PCI-6052E are not very good for motion control tasks. The 6052E doesn't provide hardware timed digital I/Os so you can control the digital lines only by software. This is both slow and inaccurate as long as you are running the board under a non-deterministic OS like Windows.
    On a real-time OS the jitter would be better but still the frequency would be low and it would still be hard to program accurate acceleration and deceleration ramps.
    If you use the counter/timer instead of the digital I/Os you could reach higher velocities and a much better timing accuracy but it would be even harder to program acceleration/deceleration ramps which you will need if you want to reach higher velocities with your stepper motor. Additionally for motion control applications you may want features like limit switch monitoring and following error tracking which require again real-time capabilities.
    With this said I don't recommend the usage of a multifunction DAQ board as a motion control board. Please have a look at the NI motion control boards like the PCI-7332 which does all the motion I/O and trajectory control onboard.
    Best regards,
    Jochen Klier
    National Instruments Germany

  • Is it possible to change the number of weeks to be displayed in the month view in calendar (mavericks)?

    I'd like to know if it's possible to change the number of weeks to be displayed in the month view in calendar? Thanks!

    No.
    There are up to six calendar weeks that might be used to display the 31 possible days in a month.
    So the month view displays six weeks.

  • Is it possible to change the ALV report layout settings in spool request

    Hi All,
    Please let me know is it possible to change the ALV layout settings in background as we can change the layout settings in foreground to get correct format when download to excel.
    Regards,
    Jyothi CH.

    Hello,
    Add a parameter for layout on selection-screen (p_varmm LIKE disvariant-variant).
    As you are in backgroud mode, ALV will be printed with this layout (assuming you call correctly the MF ALV_LIST or REUSE_ALV_GRID)
    Regards,
    Christophe

  • Does anyone know if it is possible to change the display in week view to show 24 hours per day for those of us that work irregular hours

    Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
    Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
    The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

    Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
    Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
    The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

  • Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID from one account to match the second account, without losing the information on each account?

    Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID for one of the accounts to match the other account, without losing the information from either account.
    thanks

    Welcome to the Apple Community.
    It's a little tricky to move data from one iCloud account to another but it can be done. But what makes you think you have 2 iCloud accounts.

  • Is it possible to change the video card of a pavilion g7-1075dx?

    So, I have an HP Pavilion g7-1075dx Notebook with Windows 7. I'm an avid gamer and wish to play the newest games. However, there's one problem thats keeping me from doing so. Alot of the newer games require newer video/graphics cards. This particular laptop has an ATI Mobility Radeon HD 4250. The newest games seem to require ATI Radeon HD 4850 and above. This is the only thing thats keeping me from playing games like Starcraft II on the highest settings OR in the case of Star Wars: The Old Republic, it almost keeps me from playing the game, period, due to the graphics being too much for my current card to handle, causing massive lag. I was hoping I could change the video card. Upgrade. However, i've heard that with most laptops or notebooks you can't upgrade anything other than the RAM. I'm hoping anyone on here can help me out and tell me if it is possible to get a new video card for my laptop. We don't have a desktop computer so this laptop is my only hope for a long time to play newer PC games.

    Alright, let me put this in a simpler message: Does anyone know if it is possible to change the video card currently in my laptop, the HP Pavilion g7-1075dx, for a newer and better one. ATI Mobility Radeon HD 4250 to ATI Radeon HD 4850 or higher.

  • Is it possible to change the colour of box in script from black to blue

    Hi,
    Is it possible to change the colour of box in script from black to blue  or some other colour and background colour also...if so how....
    Thanks.

    No..
    It is not possible in scripts..
    In scripts u cannot use colors..
    In smartforms u can do that..
    reward if it helps u..
    sai ramesh

  • Is it possible to change the order of the fields in the int table?

    Hello
    Is it possible to change the order of the fields in the int table?
    Lets say itab has the following fields :
    F1, F2, F3
    I would like to see it as F2 F3 F1
    Thanks

    >
    Comandante Che Guevara wrote:
    > Lets say itab has the following fields : F1, F2, F3
    >
    > I would like to see it as F2 F3 F1
    What do you mean by "like to see" ? You can WRITE the fields in any order you want. If you want to display the internal table in an ALV you can manipulate the fieldcatalog.
    If you want something else other than display the field, you have to explain your req. in detail.
    BR,
    Suhas

Maybe you are looking for