Is it possible to change the status from Bid Rejected to Bid submitted?

Hi there.
We are working in SRM 4.0.
One user rejected a bid, but it was a mistake. Is it possible to change the status from Bid Rejected to Bid submitted?
We would like to modify the status from Bid Rejected to Bid submitted or Awaiting Approval to Bid submitted in order to solve errors.
Thanks and regards.
Raúl Moncada.

Hi ,
Use Function Module : BBP_PD_BID_STATUS_CHANGE
Supply Activity = 'QOSU' .
Regards,
Sachin S M

Similar Messages

  • Is it possible to change the costing from moving average to standard??

    hey all,
    i wana know is it possible to change the costing from moving average to standard or vice-versa in the item master??
    cheers

    Hi Satish
    Please look at the documentation from SAP for using this function. I just looked on my drive and can't find the document I used to have for this.
    Just setting quantities to zero will not work as all open P/O, S/O, etc must also be closed before you can run the Inventory Valuation Method function. This is all detailed in the document.
    I have done this successfully before for a client with over 4000 items, so I have been through the process. Please let me know if you need assistance.
    Kind regards
    Peter Juby

  • Sharepoint Designer - Two step List Workflow task item is not changing the status from not started to Complete

    Hi 
    Using SPD i am creating list workflow.
    Scenario: Employee submits a request . Task assign to manager. Manager can either approve/ reject. If approve then change the state column to "done". If rejected the state column to "Rejected".
    Problem is "Assign a to do item" is assigning the task to manager. But after manager approves the status in the task list not changed to "Completed". Still it is showing "Not started". I dont want to manually complete the task.
    Please help me for automatic process. 
    What i should do to change the status to "Complete" automatically after manager approval
    Regards
    Jhanani
    Janani.R

    Hi Janani,
    From your description, you would like to create an approval workflow for a list. When an employee submit a request to the list, an approval task should be assigned to manager, then manager could approve or reject the request. From the request list,
    we should be able to see the Approval task’s status.
    Not understand the reason of designing the workflow to two steps, an approval action should be enough from my understanding. For producing, I create a list named Request list, then customize it in InfoPath form to add a Request field for stating request
    content. Then add a workflow to list named Approval task, add the action of Start an approval process with administrator and make the workflow automatically start when item is added.
    The image below shows the status of Adding items, Approving and Rejecting. Please check if it could meet your requirement.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Possible to change the datasource from a business-view to a Sql Command ?

    Hello,
    When a business view contains a lot of elements it takes a while just to open the report.
    We'd like to keep the BV as the dictionnary, but,
    once the report design completed,
    we'd like to disconnect the business view and replace it by the Sql command which can be seen in the menu option 'show SQL query'.
    Is it possible via the RAS sdk ?
    Did somebody experience this ?
    How to proceed ?
    Thanks a lot
    Alain

    Hi Ted,
    I'm thinking opening a Case for this problem of opening reports based on a big BV.
    We can't really reduce the BV, since it is the dictionnary and we need the whole thing...
    I'm wondering why it is impossible to change the Datasource if the tables and fields underneath are identical.
    Is it impossible to change the fields' mapping ?
    The other solution, as you suggest, is to create a report from scratch, create a new Datasource with the Sql command format, and rebuild the report... I agree it looks like a big job...
    Do you know if it is possible to export the report in XML for instance, change the XML, and then re-import ?
    Thanks for your Help.
    Alain

  • It is possible to change the display from a macbook pro

    I have a late 2011 macbook pro 15", it is possible to do an update to the display? Like change it for one with more resolution.

    Yes, there is a company that switches apple computer displays.  The one I have heard a lot about removes your screen, and puts on a touch screen display.  It essentially turns it into a mac version of the windows computers that have a screen that flips around and lays flat for easy writing.  I cannot remember the name of the company but I will look around for it.  Just search around on google.  But to be honest it is probabaly cheaper to buy a new mac then to have the display swtiched.  If I remeber correctly its about $1000.  I will keep you updated!

  • While Changing the status system gives error

    Dear Experts,
    In Solution Manger,  While changing the status from Tcode SE38 with Program CRM_SOCM_SERVICE_REPORT system gives error.
    Document 8000002519 refused for technical reasons: ERROR_FREE
    Message no. SOCM_ACTION_LOG203
    Diagnosis
    The status value cannot be changed.
    The document may no longer be modifiable as a result of its status, or it may be being edited by another user.
    System Response
    This change transaction is skipped during report processing.
    Procedure
    Analyze the corresponding document during transaction processing and perform the status change manually if necessary.
    Also if i select the status as in process, then it executes sucessfully.  Please help me in this.
    Ramesh Jaiswal
    9867936636

    Hi Ramesh,
    Pls check your SP level because till SP17 this (CRM_SERV_REPORT) Tcode is not present
    I just checked.
    So it seems this is availabe only after SP18.... we can use the above report.
    Kindly confirm once you solve your problem.
    Dirk
    Can you please tell us a document which wil tel us what technical things have been changed in this new SP18.for e.g the source for this information.
    Regards
    Prakhar

  • Restricting changing the status of an order

    Hello,
    When creating an order (tcode va01), it is possible to change the status of the object. Some of the statuses are for example:  
    u2022 1 Napp Not Approved
    u2022 2 App Approved
    u2022 3 Reje Rejected
    u2022 u2026.
    Is it possible to restrict people in choosing the status? For example  one can only choose Napp and the other one can only choose App.
    I have checked the va01 auth obj in su24, but did not find any auth obj related to this matter.
    Thank you very much for your help in advance.
    WR
    Salameh

    Hello,
    I think no status objects are present for customization in sap and for this you can use STATUS_OBJECT_CREATE (functional module) and it will generate for you a temporary OBJNR and you can fill at least OBTYP and replace it actual one, for replacement you can use function module STATUS_OBJECT_SWITCH_NUMBER.
    Hope this helps
    Dheeraj

  • How to change the status of a process chain

    Hi,
    I went through Siegfried's blog and knew how to restart a process chain at a failed step which doesn't have "Repeat" option.
    But is there any other function module through which we can change the "Actual State" of the process chain, in siggi's method we can change only the "i_state" of a particular process but not the "Actual State"(refer to RSPCPROCESSLOG table) of the process chain.
    Please do give your suggestions if there is any way to change the "Actual State" of a process chain.
    Regards

    hey Vamshi,
    We can directly change the status of the process chain.
    there is a specific way to do it, you can go in se38 and change the status from one to another ...go to se38 .... type....rspcprocessmonitor*.........presss f4...
    you will get a standard program ..
    now go to this program ...and give the set of inputs .... like PID and all from RSPCPROCESSLOG table ..
    and in the state give the state you want and press f8.
    this should work.
    Assign points if it answers your queries.
    Thanks,
    Dennis

  • Cancelling a absence request haas not changed the status by the user

    Hi experts,
    An absence request has been cancelled,. Looking in Status Monitor, i will see that the reuest has been cancelled, but the user see the status stay on "Pendig For Approval". Normally the user will see the Absence Category set to Cancelled, but not "Pending For Approval". The reason is unknown to me. Thus i need your support.
    Thanks in advance
    Mehdi

    Just to confirm my understanding, are you saying that:
    1) Employee requested an Absence through SSHR Leave of Absence
    2) An administrator queried the absence in the Workflow Status Monitor and Cancelled it
    3) Now that absence is showing to the Employee as 'Pending Approval'
    Is that right? You mention 'Normally the user will see...'. When you say 'normally' what is the behaviour you expect?
    If I've understood you correct this is the behaviour I would expect: cancelling a workflow does not change the status from 'Pending For Approval' and it definitely does not change the Absence Category on the absence. Cancelling an absence via this route isn't really recommended because - as you are seeing - it gets stuck. It's best to get the approver to reject the absence instead.
    To remove this cancelled absence, take a look at these Oracle Support articles:
    Unable To Remove Cancelled Workflow Item Related To LOA Transaction [ID 1123714.1]
    How to Purge Obsolete Workflow Runtime Data (FNDWFPR) for HR Workflow Completed Processes [ID 237564.1]
    How to Run the HR Workflow Cleanup Process (HRWFDFCT) [ID 237524.1]

  • Is it possible to change the way QuickTime X records audio?

    Is it possible to change the settings from recording in stereo, to recording in mono? When doing a "New Audio Recording" in QuickTime X

    Try the QuickTime forum.

  • Need to capture a Status date and keep it unchanged if I change the status

    Hi,
    I have a task list with multiple status like NOT STARTED, IN PROGRESS, WAITING FOR PROOF, WAITING ON SOMEONE ELSE, APPROVED, COMPLETED.
    Now, I wanted to capture the WAITING FOR PROOF date so that I can compare it with TASK DUE date and set if it is "On Due" or Over Due" so I used the following syntax:
    =IF(OR(Status="Waiting for proof",Status="Waiting on someone else"),DATE(YEAR(Modified),MONTH(Modified),DAY(Modified)))
    This works, but if I change the status from WAITING FOR PROOF to COMPLETED, the captured date is changed to "No" which I do not want to happen. I want to retain the same date captured even if I change the status.
    Many thanks,
    Vasanth

    
    Vasanth, your issue is because you are using the "modified" field whichchanges anytime you open the record. What you may need to add is a datefield that you control and will hold the date you which to compare against. You could initially capture the "created" date in that field then update it ONLY if specific field changes happen so you can change the Status field without disturbing your date comparison. This would require some calculated fields to update this date field only when it is necessary. Good luck!

  • Is it possible to change the user status of a TECO Order

    Hello Folks
    Is it possible to changes the user status of a TECO Order?
    I have tried to change it using the FM 'STATUS_CHANGE_EXTERN'. Its working fine for NON TECO Orders but not for TECO Orders.
    On the other hand I was able to manually change the user status for a TECO Order in transaction IW32.
    I need to change the user status from NFBK to FBK.
    Please provide some inputs for the same.
    Thanks n Regards
    Ramesh

    The simple way is via the Internationalization settings via ARD or RDP or Screen Sharing, either via System Preferences or (if enabled) via the menu bar. If you're looking for a lower-level approach, there's not AFAIK a direct command for this. As for one possible approach, might [threadID=2106201|http://discussions.apple.com/thread.jspa?threadID=2106201] help?

  • Possible to Change the Order Status

    Hai
    When i am booking the sales order the status is showing the Booked is it possible to change the Booked status according to the customer requirement ....
    thanks in advance
    M.Meenashi Sundaram

    Hai its possible to change the order status from the
    setup>quick codes>order management>
    type --flow status
    we can able to change it
    thanks
    M.Meenashi Sundaram

  • Is it possible to change the in process status.

    Hi,
        I am using SAP CRM 6.0 IC webclient.
    Is it possible to change the Agents inbox item status from u201CIn processu201D to u201COpenu201D.
    If yes how?
    Regards,
    Biplab Mandal

    Hi Biplab Mandal ,
    Is the user you are logon the one that have the owner of the item in process?
    If you arent the onwer i think you can't change the status. Neitherless you can manipulate the buttons on the method:
    CL_ICCMP_IN_INBOXITEMS-CHECK_SELECTION
    try force lt_buttons-reject_dis to c_false for the button to show for your case.
    hope this help.
    Best regards,
    Nuno Lopes

  • Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID from one account to match the second account, without losing the information on each account?

    Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID for one of the accounts to match the other account, without losing the information from either account.
    thanks

    Welcome to the Apple Community.
    It's a little tricky to move data from one iCloud account to another but it can be done. But what makes you think you have 2 iCloud accounts.

Maybe you are looking for

  • Report generation using Excel

    I created a VI for making a report in Excel. It works correctly, however when I built an executable files, it is unable to do the processing and announce 'error 7 open VI reference in Excel'! I was wondering if anybody can guide me that how I can fix

  • Windows server 2012 and windows xp remote desktop connection loss

    I am having this problem for a month now, and i am stumped with trying to find an answer . I have talked with several network admins in my area and with no luck i have not found a solution. I have a windows server 2012 placed with 5 pcs that are conn

  • Logical System name in Entitlement Systems

    Hi, In Authentication > SAP, I have given System and client names, but logical system name is not generated. Please let me know how to resolve this. Thanks in advance, Priya

  • [SOLVED]"[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid -

    ... remainder is 128" I get this lines since a few weeks on every ~second boot. I can't bypass it or ignore it, just a reset helps. The screen comes right after the mounting of the partitions: The monitor goes black (earlier than with a regular boot)

  • Future of JavaFx and commitment from Sun

    Hi All, I wanted to get some insight into the level of investment an organization could make into adopting JavaFX as the preferred UI technology for their products/applications. Is Sun committed to promoting JavaFX and making it production quality an