Is it possible to change the values of fields In Me21n tansaction?

I Have to put in some logic to change the values of already existing Shipping condition field in the SHIPPING subscreen at the Line item level in ME21n transaction.
I searched for the user exit to do soo. Did not find anything to do this. I would like to know if it is possible through some other way.
thanks
shubha

Hi Shubha!
You might use BAPI_PO_CHANGE. Even if there would be a user exit / BADI, then execution is not sure.
You said: 'already existing shipping field' -> exits of a transaction are only executed during maintenance, not afterwards.
So maybe you have to make your changes completely outside of PO.
Still have a look at BADI ME_PROCESS_PO_CUST, there are a lot of methods and one might help you.
Regards,
Christian

Similar Messages

Is it possible to change the value of "maxdatafiles" after creating a db??

Hi, all.
Is it possible to change the value of the followings after creating a database??
-maxdatafiles
-maxinstances
-maxlogfiles
-maxlogmembers
-maxloghistory
Thanks and Regards.

Hi Chris,
Thanks for updating that but here's what in Oracle Doc:
From Oracle Documentation (Oracle® Database New Features Guide 10g Release 2 (10.2))
Eliminate Control File Re-Creation
With the control file enhancements, there is no longer a requirement to re-create the control file when changes in the configuration parameters are made. These include the MAXLOGFILE, MAXLOGMEMBERS, MAXLOGHISTORY, MAXDATAFILES, and MAXINSTANCES parameters.
This feature eliminates database downtime when a configuration parameter change is made in the control file
http://download.oracle.com/docs/cd/B19306_01/server.102/b14214/chapter1.htm#sthref12
Regards

Where it is possible to change the value separator in Custom Field?

Hello,
This is a question around the "Custom Fields" and "Lookup Table"
I linked a "Custom Field" to a "Lookup Table".
I select the option "Allow multiple values to be selected from lookup table"
When I used this "Custom Field" in a view, the selected values are separated by a comma ",".
Where it is possible to change this value?
I saw another project server where the character is a semi-column ";" and I would like to test with ";".
Thank you in advance
Pascal Jean

Hi,
This will be triggered by your regional settings.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |
Hello,
Thank you for the answer.
Do you mean the "local regional settings"?
Because, depending on the PWA site I'm connected to I don't have the same values. I'm obviously using the same workstation.
Regards

Is it possible to change the email "To" field from what's in Address Book?

I would like to change the name displayed in the "to" address from the way it's entered in the address book but can't find how to do this. I like to have the address book sort alphabetically by last name (so it's set up with last name first), but I don't always want to send an email in that format. For example, I'd like to change "Smith Family" (address book) or "Smith John" (address book) to "John Smith" when I'm sending an email, or even just the email address (without a display). I could do this in Outlook, but I can't find the same feature in Mac Mail. Even when I delete the display name and try to retype just the email address it just "bounces back" to whatever the name is in the address book. I hate to have to make multiple entries in the address book for the same family/email address just to get different display names. Is there a way around this??

I'm sorry, but I'm still not clear on the problem. Do you mean that you have both "Smith Family" and "John Smith" tied to the same email address? If so, again, that "friendly" name isn't sent to the recipient, so the person receiving the email will get exactly the same thing regardless of whether you select the "Smith Family" entry or the "John Smith" entry. The "friendly" name doesn't go along as part of the email.
It would only matter on your end when looking at your Sent email, and if that's an issue, it should be no problem to select which one you want; just start entering in the email address/name and wait a second; you'll get a dropdown with all the addresses that meet that criteria and you can just pick the correct one.
Forgive me if I'm still not understanding what the difficult is or what you're trying to accomplish.

Change the value of a variable used in a View query

I am using JDeveloper 11g to develop a simple portlet application which displays data loaded from database. I am displaying the data by dragging the ViewObject from the AppModuleDataControl to the View.jspx page and selecting the option ADF Read-only Table. My ViewObject has a single variable :empId. Now is it possible to change the value of this variable with a value that comes from the request object. On the internet I found the following code:
        FacesContext facesContext = FacesContext.getCurrentInstance();
        Application app = facesContext.getApplication();
        ExpressionFactory elFactory = app.getExpressionFactory();
        ELContext elContext = facesContext.getELContext();
        ValueExpression valueExp =
        elFactory.createValueExpression(elContext, "#{data.AppModuleDataControl.dataProvider}",
        Object.class);
        ApplicationModule am = (ApplicationModule)valueExp.getValue(elContext);
        ViewObject emplVO;
        emplVO = am.findViewObject("EmployeeView1");
        emplVO.setNamedWhereClauseParam("empId", "1");I have put this code in the public void processAction(ActionRequest request, ActionResponse response) method. However this does not work when I deploy it.
Does anyone know if the above code is correct in this case and if there is a better way how I can set this up?

Hi there:
Did you add a break point and debug the code to see what is the value for the :empid parameters passed in to your view object?
If you are sure you have passed in the correct value for ":empid" parameter, then do the following:
String amDef = "yourAmDef";
String config = "yourConfig";
ApplicationModule am =
Configuration.createRootApplicationModule(amDef,config);
ViewObject emplVO;
emplVO = am.findViewObject("EmployeeView1");
emplVO.setNamedWhereClauseParam("empId", "1");
empVO.executeQuery();
which will execute your view object with the new bind variable value and refresh the view.
Please mark my answer as 'Correct' if it solves your problem, or 'Helpful' if it does.
Thanks,
Alex
Edited by: Alexbie on 27-Aug-2010 8:52 AM

How to change the value in an Integer object?

Hi,
Is it possible to change the value that is contained in an Integer object.
I know Integer objects are immutable. So it might not be possible to chage to value in an integer object once its been initalized a value @ the time of construction.
Also does autoboxing and unboxing feature of 1.5 help acheive this?
Please let me know of any other alternative
Thanks
Deepak

Tried the autoboxing and unboxing feature doesnt
help.It doesn't help in general. But in this special case it doesn't help because it doesn't anything to do with it. Do you really know what you're doing?
So across the function its not changing the value.
As I have created an object of Integer class and
passed a reference of that object into the chage()
,So any changes should have been reflected
acrosss method calls.?Since you let the newly created parameter-reference a point to a new Integer object: no. Why? You have two references to I(31). Then you move one reference to I(33). Why should 31 get another value?
Does the the java compiler creates a new Integer
object each time it does autoboxing Not necessarily. Some values are pooled. Actualy, the JVM does it. The compiler never creates any object.
so that the value
is lost across method calls?That's not the compiler's or the JVM's fault. It's all a misconception of yours.
Is there any means to achieve this?What for?
int a = 0;
a = change(a);
int change (final int i) {
return i + 12;
}Does exactly what you want, without side-effects.

Is it possible to Change the pooling interval time in XI3.0 or XI3.1

Hi,
For every 15 sec the CMS will check the scheduled jobs status and act accordingly ,by default the value will be 15 sec now We want to change the pooling interval time to 1 min.
-- Where do i have to change the pooling interval time.
-- Is it possible to change the value or not.
Please help..
Thanks.

Hi Collin,
Could you le me know the resolution
Regards
Alan

How to change the value of a Wrapper object?

Is there any way to change the primitive value inside a wrapper class object like Boolean?
Or else if its not possible any work arounds are available?
Thanks

No it is not possible to change the values, they are 'imutable'.If you want mutable versions then it is simple enough to write your own! You can use the source of Boolean etc as a starting point!

Is it possible to change the VBAP-ADRNR item address field value?

Hi,
Is it possible to update the VBAP-ADRNR item record field value?
I am trying to update this field value from BAPI_SALESORDER_CHANGE but it is not changing the value.
I am only able to change the corresponding address for that address number.
But I need to change the address number( I want to replace with header address number) itself.
If any ideas please let me know.
Thanks,
Mohan.

ajitabap wrote:
Hi
>
> Schedule Lines related Data USING BAPISDORDER_GETDETAILEDLIST Then Pass them to BAPI_SALESORDER_CHANGE Then It work and update the field.
>
> Regards
> AJIT
eh????
What's the relevance of schedule lines and ADRNR?
@OP: Don't. There is a reason why SAP gives out a new ADRNR. And manually changing the value of a primary/foreign key is never a good thing to do.

Is it possible to programmatically change the value of a LV8.2 project symbol at runtime?

I need to programmatically change what a conditional disable structure will execute at runtime. (See this thread for more details if you're interested.) As far as I can tell the only way to do this is to change the value of a project symbol at runtime.
I've tried to find a property that allows me to do this but so far it eludes me.
Anyone know how to do it?
Troy
CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
Beware of the man who won't be bothered with details. - William Feather
The greatest of faults is to be conscious of none. - Thomas Carlyle

This is definetly not possible. When the conditional disable structure is compiled, only the actual case is compiled. The other cases don't even have to have valid code, they can have broken wires or bad VI's in them!
Like Mike suggested, you need to load VI's that do the task dynamically.
Regards,
Wiebe.

Is it possible to change the asset value after depreciation posted for 4 months

Hi
Is it possible to change the asset value from 50000 to 60000 after posting the depreciation for 4 months.
If it is possible kindly share the process..
Thanks
Srikanth KVS

1. In the explorer page, settings dialog, you can change the display format to show only name.
2. We cannot use other freeform attribute as DisplayFormat, rather than Code Name. So there are 2 option here:
a. Remove HierarchyName attribute and just use Name attribute. In the next release, we will allow give Name, Code attribute a displayname, so you can give Name display name as "HierarchyName" in the SQL Vnext release.
b. Make a Business Rule to update Name when HierarchyName is changed.

SPEL? make REASON field required if user has changed the value in SALARY

I have a requirement to make REASON field required if user has changed the value in SALARY field. Is it possible using spel? what are my options?

Karan,
You can change the Rendered Property through personalization.
But in your requirement you need to attach the Spell through personalization & extend the existing CO to set the value of the SPELL based upon the condition.
Note - Refer this thread http://forums.oracle.com/forums/thread.jspa?threadID=2176729&tstart=0. If you have worked on SSHRParams kindly help the user.
Regards,
Gyan

Dump when changing the value for a field (of 13 decimals) in alv grid.

Hi Group,
Its giving a dump when user is trying to change the value.
dump description: Unable to interpret "70,000 " as a number.
what is happening here is, the original value is 50,000 and he is deleting 5 and replacing it with 7, here its throwing the dump.
If he removes the complete number 50,000 and then gives 70000 its taking the value.
I tried to use, the decimals options in alv field catalog but to no joy.
Please can you give me an advice on this.
Many Thanks.

the problem is the comma in the 70,000....that's an alpha character.... Normally, we expect SAP to display numeric fields in a appropriate format, based upon their numeric type, but trying to forcibly insert '70,000' into a true numeric-type field can generate an 'unable to interpret xxx,xxxx as number' error.
You could experiment with changing your ALV column to a char17 (or appropriate width) and putting your numeric value into that to display, then converting back to type P, or other field type in the table, in a column that is not displayed, when the user changes the value.... essentially two columns, one not displayed with a routine to copy/convert the numeric field into the alpha field and the reverse when the field is changed.
But, the better solution is probably for the user to understand that they're seeing a formatted numeric field, and that they need to replace the entire value with the only possible punctuation being a decimal and (if necessary) a negative sign.

How do I change the value of the Order By field in an MP3 file?

good day Guys,
I'm new here in the forum and I have a question that is "breaking" the order of my songs and my head too ...
How do I change the value of the Order By field in an MP3 file?
for example, in the photo below, the song "The Bad Touch" is coming BEFORE the song "A Little Respect", this happens because of the Name field to Order ...
My "problem" is in the photo below, the "tab" Order, iTunes will not let me erase what is written in the "Sort As" ...
I've been "collecting" several songs over SEVERAL years
I'm currently with more than 1,500 songs on HD and several backups on DVDs and external hard drives and I think, download it again, will be a "little" laborious and boring
I DON'T WANT to be filling the tags of songs (name, singer, CD, year, etc.)
I have used the program Mp3tag to remove the music tags
I've tried to download the song again and go through Mp3tag program as if it were a new song
I've changed the music access permissions, folder and even entire hard drive (my Windows has only one user)
I've tried to catch the song again, from a previous backup
I've tried to create a copy of the file at iTunes own
I've tried to create a new music file in a music recording program
NOTHING of what I did above resolved
-> I'm using Windows 7 64-bit Ultimate
-> I'm using iTunes 12.1.1.4 for 64-bit Windows
-> My iPad is the third generation (a little old, I know) with Wi-Fi and 3G, but it has served me VERY WELL
-> The iPad is updated with iOS 8.1.3 and is not unlocked
I'm sorry for the GIANT post, but well, I think I could explain as much as possible and for my English, too bad, by the way, I'm from Brazil and I'm using Google translator
Hugs and await answers,
Paulo Ricardo

hello turingtest2,
my language is Brazilian Portuguese (there are some little differences between Brazilian Portuguese and the Portuguese of Portugal, but nothing that interferes with the script)
at this time, I'm managing songs manually, I don't know if this will interfere with the execution of a script or command
as I picked up this iPad recently, I still don't understand how to set up the iTunes Music Library and the person who gave me, told me it was easier to put the songs manually
as you said, in my iTunes, 95% of the songs are with ALL the blank fields, including the Name to Sort field, only songs that begin with a/an/the standing with the Name to Sort field filled with name of the song, without the a/the
I do not know what to do...
I want to learn to ride the iTunes Music Library, that my work is less
you know any site that teaches create/manage my iTunes Music Library?
this site/forum may be in English, no problem
thanks for all your help and the help of others who responded to my request

I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD? If yes, where I find a tutorial about this? Thanks a lot and best regards all.

Hi people,
I'm typing from Brasil, sorry my English.
I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
I intend to keep the original DVD driver and install the SSD in the same HD place.
If yes, where I find a tutorial about this?
And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
What brand and model of SSD do you recommend?
Thanks a lot for now and best regards all.
Carlos Sgrillo
Porto Alegre, RS, Brasil

Tukaine
Sep 23, 2012 10:59 PM
Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
Fixes people have used in the past included:
Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
HDD Fan Control
HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
Instead of HDDFan Control, get the free SSDFan Control
http://exirion.net/ssdfanctrl/

Is it possible to change the values of fields In Me21n tansaction?

Similar Messages

Maybe you are looking for