Is it possible to change the volume of MPMoviePlayerController

Hi,
How to mute/unmute the MPMoviePlayerController while playing a video.

No it is not, it does not use an RGB light.

Similar Messages

Possible to change the front and back speaker volume ?

Hello, as it says in the topic, i was wondering if it is possible to change the volume of the front and the back speakers (the same way it is possible to change the volume of the center speaker).
If anyone could tell me wether this is possible at all i would largely appreciate.
Specs:
Creative Inspire T5900 speaker system
Creative SoundBlaster Live! 5.1 Digital
Windows XP

The older Mac Pros had a separate board for the front panel connectors. Looking at pictures of the 2009 Mac Pro back-plane board I can't see any soldered on connectors. Based on the link below for an older Mac Pro it looks like it could be as easy as making a cable to replace the front panel board USB cable with one that could connect to a USB PCIe card (when they are available for Macs).
http://ep.yimg.com/ca/I/lovemacs2113427757506
Edit: Assuming that there is no additional circuitry on the front panel board that has to be USB3 compliant.
Edit (again): I missed the fact that USB3 uses a different connector so you would have to replace the entire board with one that has USB3 connectors on it. It is unlikely Apple or even a third party would make one.
Message was edited by: Martin Pace
Message was edited by: Martin Pace

IBook logs off when I change the volume or try to restart

My iBook has been logging itself off every time I try to change the volume using F4 or F5 or when I try to restart from the Apple logo. I tried to run a virus scan and it came up with no viruses found. This problem started a week ago and may possibly have come from a virus from a Word document. Has anyone else had this problem? Or does anyone know how to fix this?

Hi,
Try reinstalling the HP OSD Utility on the following link.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55152.exe
After this has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can I change the volume of one specific part in a clip/sample?

Hi!
The question is: Can I change the volume of one specific part in a clip?
Im not talking about a specific track, but a specific clip/sample.
For instance you have a clip/sample with the duration of 4 sec. and you want to adjust the volume of a part that's only 0.2 sec.
Is this possible?

Juicyappleman wrote:
Can I change the volume of one specific part in a clip region?
yes, use a volume automation curve, search GB's help for "curve"

Is it possible to change the number of weeks to be displayed in the month view in calendar (mavericks)?

I'd like to know if it's possible to change the number of weeks to be displayed in the month view in calendar? Thanks!

No.
There are up to six calendar weeks that might be used to display the 31 possible days in a month.
So the month view displays six weeks.

I can't change the volume of the background music in my project even if I put it to 0%

I can't change the volume, I've tried to put it down with Itunes, stop and start again my computer but nothing work... PLEAAAAAASE HELP...

Solved it, there was a problem of the same music put it twice!

Is it possible to change the ALV report layout settings in spool request

Hi All,
Please let me know is it possible to change the ALV layout settings in background as we can change the layout settings in foreground to get correct format when download to excel.
Regards,
Jyothi CH.

Hello,
Add a parameter for layout on selection-screen (p_varmm LIKE disvariant-variant).
As you are in backgroud mode, ALV will be printed with this layout (assuming you call correctly the MF ALV_LIST or REUSE_ALV_GRID)
Regards,
Christophe

Does anyone know if it is possible to change the display in week view to show 24 hours per day for those of us that work irregular hours

Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

So in the last few days I've noticed that pressing my volume change keys actually isn't changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squar

So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
Please help!

You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379

Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID from one account to match the second account, without losing the information on each account?

Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID for one of the accounts to match the other account, without losing the information from either account.
thanks

Welcome to the Apple Community.
It's a little tricky to move data from one iCloud account to another but it can be done. But what makes you think you have 2 iCloud accounts.

How do I change the volume for a single midi instrument in GarageBand 10? Every time I move the volume, it moves back!

How do I change the volume for a single midi instrument in GarageBand 10? Every time I move the volume, it moves back!

Every time I move the volume, it moves back!
Check, if you have a volume automation set on the software instrument track.
If the track volume automation curve is enabled, the volume slider for the track will move with the automation curve.
Click the automation curves disclosure triangle in the track header and disable the volume automation.

Can you change the volume display at bottom of screen to the song time instead?

I have just bought a new Ipod Nano and really like it! The only problem I'm having is when playing songs the bottom of the screen shows the volume level rather than how far it is through the song in time (like the old nanos used to show). I find it really annoying not knowing at a quick glance how much more of a song is left to play.
I know this info is displayed by double tapping the screen (although it is only shown temporarily). Is there a way of changing the volume level icon at the bottom of the screen to display the song time instead?
Thanks in advance.

Is there a way of changing the volume level icon at the bottom of the screen to display the song time instead?
There is not. You can let Apple know how you feel about it using the form on this page.
http://www.apple.com/feedback/ipodnano.html
B-rock

Is it possible to change the video card of a pavilion g7-1075dx?

So, I have an HP Pavilion g7-1075dx Notebook with Windows 7. I'm an avid gamer and wish to play the newest games. However, there's one problem thats keeping me from doing so. Alot of the newer games require newer video/graphics cards. This particular laptop has an ATI Mobility Radeon HD 4250. The newest games seem to require ATI Radeon HD 4850 and above. This is the only thing thats keeping me from playing games like Starcraft II on the highest settings OR in the case of Star Wars: The Old Republic, it almost keeps me from playing the game, period, due to the graphics being too much for my current card to handle, causing massive lag. I was hoping I could change the video card. Upgrade. However, i've heard that with most laptops or notebooks you can't upgrade anything other than the RAM. I'm hoping anyone on here can help me out and tell me if it is possible to get a new video card for my laptop. We don't have a desktop computer so this laptop is my only hope for a long time to play newer PC games.

Alright, let me put this in a simpler message: Does anyone know if it is possible to change the video card currently in my laptop, the HP Pavilion g7-1075dx, for a newer and better one. ATI Mobility Radeon HD 4250 to ATI Radeon HD 4850 or higher.

Is it possible to change the colour of box in script from black to blue

Hi,
Is it possible to change the colour of box in script from black to blue or some other colour and background colour also...if so how....
Thanks.

No..
It is not possible in scripts..
In scripts u cannot use colors..
In smartforms u can do that..
reward if it helps u..
sai ramesh

I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD? If yes, where I find a tutorial about this? Thanks a lot and best regards all.

Hi people,
I'm typing from Brasil, sorry my English.
I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
I intend to keep the original DVD driver and install the SSD in the same HD place.
If yes, where I find a tutorial about this?
And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
What brand and model of SSD do you recommend?
Thanks a lot for now and best regards all.
Carlos Sgrillo
Porto Alegre, RS, Brasil

Tukaine
Sep 23, 2012 10:59 PM
Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
Fixes people have used in the past included:
Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
HDD Fan Control
HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
Instead of HDDFan Control, get the free SSDFan Control
http://exirion.net/ssdfanctrl/

Is it possible to change the volume of MPMoviePlayerController

Similar Messages

Maybe you are looking for