Is it possible to charge the 5800XM using usb ?
I saw on the web saying that the 5800XM can be charged using the data cable. and i have the CA-101 cable. is it really possbiel? if then how can i do that?
Solved!
Go to Solution.
thanks for the replie. but I found the following text in the PC Suite download page for the nokia 5800 under connection type.
"USB Cable
Nokia Charging Connectivity Cable CA-101"
http://europe.nokia.com/get-support-and-software/download-software/nokia-pc-suite/download
please take a look at it and tell me. thanks
Similar Messages
-
Is it possible to read the file using File Adapter which is in client machi
Is it possible to read the file using file Adapter which is in client machine(on the same network).Then what is thee need of FTP Adapter?
You can achieve that by exposing your client machine as a drive, then you can go using file adapter.
FTP adapter will help you to communicate with different machine which is in different network.
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
Thanks,
Vijay -
It is possible to charge an iPad3 over USB and transmit data over USB at the same time?
Hello,
it is possible to charge an iPad3 over USB and transmit data over USB at the same time?
If yes, how?
Thanks
Best regardsOK!?
That is right that the USB data oins are not connected to +5V pin.
But i found a description for a self built power supply for iPad.
http://timothyb.net/DIY_iPad_2_USB_Charger.html
and
https://www.mikrocontroller.net/topic/262610?goto=2726627#2726627
The description say: data pin D- need a voltage level of 2V and D+ 2,857V
when the data pins have this special voltage levels and VCC has +5V only then the iPad is charging.
The voltage "D+/D- coding" is the key for the iPad to charge.
OK now back to my problem.
The regular USB data pin voltage level is 0,3 - 3.,0 voltage. When the iPad is charging the data pins have this special voltage level. Now i try to transmit data over the usb data pins with the. Normaly the USB port transmit the data with a voltage level of max. 3V.
And here my problem. The higher voltage level at the data pins cares therefor that the iPad stop the charging.
Is that correct? -
Is it possible to charge the expenditures/Cost to WIP Account
Is it possible to charge the expenditures/Cost to WIP Account and at the time of revenue accrual, system takes this cost to some Cost account i.e. Cost of goods sold.
Also upon closure of project,system should trasnfer all the costs from Work In Process to Cost of goods sold automatically.
Am talking about Contract Project type.
ZeeshanHi
The method called Revenue Based Cost Accruals is pre delivered billing extension, which you may assign to project types or specific projects.
If you implement that method, verify the AA rules for the costs and for the event types do match to the intended functionality. You can follow the case study example in the Projects Billing User Guide.
Dina -
My Ipad2 was stolen about a month ago. I still have the serial number on the box. Is it possible to trace the one using my Ipad2?
No.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
Cheers, Tom -
Is it possible to automate the extraction using spool command?
Hi,
I am trying to export data from table to excel. But the result i am getting will be in million records. Till now i am manually extracting the data using plsql developer. but it is hampering my work alot when i am extracting.
i am able to extract the data using below spool command in sqlplus
set feed off markup html on spool on
spool 'd:\filename.xls'
select * from ca_trial_milestones;
spool off
set markup html off spool off
But is it possible to run it in sql/plsql developer and schedule it on night time.
U r replies will help me alot.
Thanks alot in advance981145 wrote:
Hi,
I am trying to export data from table to excel. But the result i am getting will be in million records. Till now i am manually extracting the data using plsql developer. but it is hampering my work alot when i am extracting.
i am able to extract the data using below spool command in sqlplus
set feed off markup html on spool on
spool 'd:\filename.xls'
select * from ca_trial_milestones;
spool off
set markup html off spool off
But is it possible to run it in sql/plsql developer and schedule it on night time.
U r replies will help me alot.
Thanks alot in advanceYou can create a batch file in window and then setting appropriate environment setting you can do
sqlplus user/pass@connect @scriptnamewhere scriptname is you above script.
You can then schedule this in windows schduler
However excel can not handle more than 1,048,576 rown as of version 2010
You can save the spool as html file and you will able to view the resultset. -
Can I Charge the iPad using a 115V / 400Hz power supply?
The charging unit specifies 100-240V and 50-60Hz. Will the iPad be damaged if I use a 115V and 400Hz power supply. The 400Hz power supply is what I've got access to using an aircraft power supply. Thanks.
The increase in frequency will cause a higher input impedance to the transformer inside the charger itself. The charger will therefore have less charging current available and therefore charge the ipad slower. If the compensation circuitry inside tries to overcome the reduced current on the output, it could cause damage.
The formula for input impedance on an inductive device is XL = 2piFL. If you increase input frequency (F), you increase input impedance (XL).
Note: If it's a military aircraft, I am surprised the Plane Commander will let you use the device on the aircraft due to there being transmitter(s) inherent to the ipad. Military aircraft are EMP-hardened from outside emissions only. A transmitter on the inside of the aircraft can cause interference to certain sensors and equipment.
Additionally, the power supply does not meet military standards for grounding, as there is not a grounding pin on the power plug. -
Can i charge the ipad using a 220 v outlet?
Can i charge my ipad2 using a 220 v outlet?
Look at the answers on this page. http://store.apple.com/us/questions/product/MC359LL/A
Cheers, Tom -
Is it possible to get the Button used in a JComboBox?
As i can retrieve the editor of a JComboBox to make change to its editor i want to know if its possible to do the same to the Button of the JComboBox any ideas?
Thanksi want to know if its possible to do the same to the Button of the JComboBox any ideas?I'm sure people in the Swing forum would know, but since you refuse to post your questions there, good luck.
By the way each LAF has its own button.
why does this method in JComboBox act wired it returns false irrespectively of the condition of the Popup. Maybe if you actually posted you SSCCE in the Swing forum you would get some help.
We are know up to 9 times you have been asked to post in the correct forum.
It has now become obvious you never search so I doubt you will be getting help in the future. -
Is possible to import the TR using TP.EXE with local system user
Hi ,
Currently I am trying to import the TR using the TP.exe. Could please let me know is mandatory to use <SID>adm user. If yes could please let me know the procedures.
Because I try with local user but it was failed. Even though I set same environment variable (Both User and System).
Regards,
VivekHi ,
Please find the log below
I am using the correct commend. if i try in SIDADM user it working fine.when i try with local user is not working.So i was confused.
This is tp version 372.04.40 (release 701, unicode enabled)
TRACE-INFO: 1: [dev trc ,00000] Thu May 12 00:09:50 2011 1042 0.001042
TRACE-INFO: 2: [dev trc ,00000] load shared library (dbsdbslib.dll), hdl 0, addr 0000000186C80000
TRACE-INFO: 3: 5 0.001047
TRACE-INFO: 4: [dev trc ,00000] using "E:\usr\sap\EC6\SYS\exe\uc\NTAMD64\dbsdbslib.dll"
TRACE-INFO: 5: 5 0.001052
TRACE-INFO: 6: [dev trc ,00000] } DbSlSdbControl(rc=0) 81 0.001133
TRACE-INFO: 7: [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=0000000000000000)
TRACE-INFO: 8: 8 0.001141
TRACE-INFO: 9: [dev trc ,00000] } DbSlSdbControl(rc=0) 8 0.001149
TRACE-INFO: 10: [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=000000000202EBE0)
TRACE-INFO: 11: 8 0.001157
TRACE-INFO: 12: [dev trc ,00000] } DbSlSdbControl(rc=0) 4 0.001161
TRACE-INFO: 13: [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000140E5A1E8)
TRACE-INFO: 14: 15 0.001176
TRACE-INFO: 15: [dev trc ,00000] } DbSlSdbControl(rc=0) 5 0.001181
TRACE-INFO: 16: [dev trc ,00000] { DbSlSdbConnect(con_info_p=0000000000000000) 18 0.001199
TRACE-INFO: 17: [dev trc ,00000] DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32) 18 0.001217
TRACE-INFO: 18: [dev trc ,00000] MAXDB shared library (dbsdbslib) patchlevels (last 10) 7 0.001224
TRACE-INFO: 19: [dev trc ,00000] (0.024) Default value for max. input variables is 2000 (note 655018)
TRACE-INFO: 20: 9 0.001233
TRACE-INFO: 21: [dev trc ,00000] (0.024) Profile parameter to define max. input variables (note 655018)
TRACE-INFO: 22: 9 0.001242
TRACE-INFO: 23: [dev trc ,00000] (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
TRACE-INFO: 24: 8 0.001250
TRACE-INFO: 25: [dev trc ,00000] (0.024) Input parameters for SQL statements increased (note 655018)
TRACE-INFO: 26: 7 0.001257
TRACE-INFO: 27: [dev trc ,00000] (0.018) Create index serial for MaxDB 7.6 (note 1267841)
TRACE-INFO: 28: 8 0.001265
TRACE-INFO: 29: [dev trc ,00000] (0.018) More trace in case of packed to string conversion error (note 1262799)
TRACE-INFO: 30: 13 0.001278
TRACE-INFO: 31: [dev trc ,00000] (0.016) R3trans export aborts with signal 6 (note 1262245)
TRACE-INFO: 32: 7 0.001285
TRACE-INFO: 33: [dev trc ,00000] (0.009) IA64 alignment errors (note 1245982) 7 0.001292
TRACE-INFO: 34: [dev trc ,00000] (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
TRACE-INFO: 35: 7 0.001299
TRACE-INFO: 36: [dev trc ,00000] 4 0.001303
TRACE-INFO: 37: [dev trc ,00000] -> init() 6 0.001309
TRACE-INFO: 38: [dev trc ,00000] -> sdb_malloc(size=18) : 0000000002810EB0 (34 bytes allocated)
TRACE-INFO: 39: 18 0.001327
TRACE-INFO: 40: [dev trc ,00000] STATEMENT_CACHE_SIZE = 1000 46 0.001373
TRACE-INFO: 41: [dev trc ,00000] -> sdb_malloc(size=152000) : 00000000028B9FA0 (152050 bytes allocated)
TRACE-INFO: 42: 16 0.001389
TRACE-INFO: 43: [dev trc ,00000] -> sdb_malloc(size=656000) : 0000000002C200B0 (808066 bytes allocated)
TRACE-INFO: 44: 13 0.001402
TRACE-INFO: 45: [dev trc ,00000] -> sdb_malloc(size=288000) : 0000000002CC10B0 (1096082 bytes allocated)
TRACE-INFO: 46: 11 0.001413
TRACE-INFO: 47: [dev trc ,00000] -> sdb_malloc(size=16144) : 0000000002D080B0 (1112242 bytes allocated)
TRACE-INFO: 48: 11 0.001424
TRACE-INFO: 49: [dev trc ,00000] -> sdb_malloc(size=32048) : 0000000002D0C020 (1144306 bytes allocated)
TRACE-INFO: 50: 11 0.001435
TRACE-INFO: 51: [dev trc ,00000] -> loadClientRuntime() 358 0.001793
TRACE-INFO: 52: [dev trc ,00000] Loading SQLDBC client runtime ... 7 0.001800
TRACE-INFO: 53: [dev trc ,00000] SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
TRACE-INFO: 54: 339 0.002139
TRACE-INFO: 55: [dev trc ,00000] SQLDBC Library Version : libSQLDBC 7.6.5 BUILD 011-123-196-300
TRACE-INFO: 56: 8 0.002147
TRACE-INFO: 57: [dev trc ,00000] SQLDBC client runtime is MaxDB 7.6.5.011 CL 196300 21 0.002168
Regards,
vivek -
Windows 8.1 laptop cannot connect to the internet using USB Mobile Broadband stick.
I bought a new laptop and it came with Windows 8.1 installed. Well, things worked perfectly until I wanted to connect to the internet using my mobile broadband USB stick. I installed the software that came with the stick, and my laptop recognize
the stick but I still cant connect to the internet. The stick workes perfect in my Windows 7 and Windows 8 laptops, but IT DONT CONNECT WITH MY WINDOWS 8.1 LAPTOP. What can I do to troubleshoot this???
HOPE I AM SPECIFIC ENOUGH THOU...The PC Repair Guy,
If you haven't already, verify that you can connect to the internet through some other means such as Wi-Fi or Ethernet with your laptop to rule out any network setting issues. If you are able to connect successfully to the internet, use that opportunity
to make sure you have
Windows 8.1 Update installed as well as any other applicable updates your laptop may require.
You may also want to check the
Windows Compatibility Center to make sure that your device is compatible with Windows 8.1.
Another possibility is that the driver your laptop is installing for the device isn't the correct one. Check the device manufacturer's site for the most up to date driver they have available for Windows 8.1.
Hope this helps!
Mike
Windows Outreach Team – IT Pro -
How not to charge the iphone via USB
I was wondering if it is possible not the charge the iphone while it is plugged to the USB port of my laptop. I am just asking that as sometimes I just want to add new songs/apps without actually charging my iphone via the USB port as I prefer to do it once the battery is at 10% .
Many thanks in advance for your help/advices.
Regards
AlbertoIn a word, no.
There is no harm with charging a lithium based battery more frequently and when at any battery level and without having to charge the battery to 100% when doing so. -
Charging from Mains using USB Cable
Hi,
I've not been able to get my classic to charge from the mains using a plug with USB socket and the cable that came with my Ipod. The same thing works for my TomTom and Garmin.
I've only ever been able to charge from my PC, Klipsch dock and the dock in my car.
Help! I'm going on holiday soon, and won't have a computer to charge it from!The problem is that I want to be able to charge when on holiday, and even the official Apple travel charger is a glorified USB charger. As far as I'm aware, USB has a standard 5v output, and should work no matter what adaptor I have plugged into the mains as long as I use the dock -> USB adaptor included with my ipod?
-
I like offshore sailing which means that I am without mains electricty for extended periods. I am considering the use of an iPAD 4th generation with a download of iNAVX which would appear to give an iPAD excellent chart plotting capeabilities. But how to keep it charged after the battery runs out? It seems very inefficient to have to use an Inverter to get a mains voltage, only to reduce it again to the level of a USB output!
Long time sailor but never tried charging an iPad aboard away from dock power.
Try this forum > Ipad 12v charging issues. - Cruise -
Is it possible to charge the 2nd gen Ipod with a nook HD charger?
My Ipod battery died and I don't have a charger, but I do have a nook HD charger that looks exactly like the Ipod charger. on the adapter it says:
Input: 100-240V-50/60Hz 0.40A
Output: 5.1V=2A. So is it possible?I have the regular Nook Tablet but one of my family members bought me the wrong charger but from experience with nooks the charger works fine because its brand new. And I tried it with the wall charger and nothing showed up so I'm going to try it using the computer USB.
Maybe you are looking for
-
Massive copy of BW transformation between different source system
Hi all, in my BW I have different source systems. I have mapped several objects to one source system. Now I need to copy all the transformation to other source systems. These source system are different instance of ECCs, there are the same extractor
-
Error in Process Chain From ODS to InfoCube
Hi There What variants should follow to load data from ods to infocube in process chains? I created Process Chain,first delete content of ods and data load,Activate ods , further update ods , delete index , load from ods to IC and generate index and
-
Need document for User profile.
Hi, Can you please let me know where i will get the complete document for User profile. Thanks Utsav
-
SG300 cant change the Link Local address for an IPv6 interface
There seems to be no apparent way to change the Link Local address for an IPv6 interface If I create more than one interface they all appear to have the same Link Local address
-
Trying to re-install Creative Suite - it says turn off Safari Notifications to continue - how do I turn off Safari Notifications?