Is it possible to chenage logical system and how after a system is beeing u
Hello
I wander is it possible to chenage logical system and how after a system is beeing used for a while and how?
Hello Tina,
If the system is NOT a production system transaction BDLS can be used to change the logical system. This would be necessary after refreshing a dev system from a production system, for example.
If the system is a production system, I would agree that this is NOT advisable.
Regards
Greg Kern
Similar Messages
-
Is it possible to trigger FIPP event (and how?) when parking an FI document
Hello
I wander is it possible to trigger FIPP event (and how?) when parking an FI document with transaction fbv1(and not fv60)
Thx in advanceHi,
In Financial Accounting --> Accounts Receivable and Accounts payable > Business Transaction> Incoming Invoices/Credit Memos --> Make and check settings for Document Parking --> Create Workflow Variant for Parking Documents (Click this)
There you have to assign your workflow.
Regards,
Surjith -
Administration differences between an As Java system and an As ABAP system?
Hi, I'm not that familiar with SAP systems that are As Java based only, so apologies in advance if I ask real stupid questions here!!
Can someone please explain how one logs onto an As Java only system?... ie without the ABAP stack does one still use the SAP logon pad or am I getting confused here totally???
Also how does one do transports in an As Java system?
If you could send me a document that explains the main differences between an As ABAP system and an As Java system, particularly the differences in administrating these systems that would be very useful. My email address is [email protected]
Many thanks
AshHi,
Can someone please explain how one logs onto an As Java only system?.
You can login through browser, use NetWeaver Administrator for most of your activities. There is also Visual Administrator/ Config tool etc these have seperate GUIs.
It would not be easy to list out the options but i suggest you read understand info from help regarding the details below so that you can administer Java servers:
Visual Administrator
NetWeaver Administrator
Config tool.
SDM
With the knowledge of the tools above you can start of administrating Java servers.
Also how does one do transports in an As Java system?
You install Portal on Java server and then do transports. You should be having a system administration role.
Please do a search in help.sap.com and you will find loads of data on WEBAS Java administration.
Thanks & regards,
Vijith -
I noticed a difference the references appearance in Development System and in Run Time System. It seems to have no effect in the executable version but, per curiosity, someone have an explanation?
Development System
Run Time System
Jean-Marc
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharp
Solved!
Go to Solution.tst wrote:
When LabVIEW builds an executable, it removes the parts which are not needed from the VIs (like BDs, or FPs of VIs which will not be opened). I'm assuming this is an extension of that where the icon is not copied over. Another option is that the RTE is simply missing the code necessary to display this specific this.
In any case, I would say it's a bug, albeit a minor one.
I don't think this is a bug, the references refere to a given CTL file, which is not present in the RTE, I think LabVIEW disconnects the reference form the typedef and only saves the properties needed.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be! -
What is the Weigh Bridge System and How to Implement
Hi All,
I have a requirement from a client to interface with Weigh Bridge systen and to generate the delivery order record.
Could someone explain to me what is the Weigh Bridge system and how it is being implemented in SAP.
Thank you!
Regards,
YvonneHi,
this is to inform you that,
this weigh bridge concept is very simple its an interface with other or software which the company which is implementing SAP.
for EG:
my company is cement company in production plant you will be getting raw materials in tons and out going finished products will also be in tons.
in that plant there is weigh bridge where in flow of materials will be wieghed and if it matches to the paper which is getting along with then he ticks OK other wise NOT.
the above case applies to out going of goods in tons also.
regarsd,
balaja -
TS4006 Is it possible to revert to 'find and lock' after I clicked to erase?
Is it possible to revert to 'find and lock' after I clicked to erase?
Kryan73 wrote:
… after I import a new file, I have to then go searching for it amid all the other files…
in a perfect world, you do know the recording date, and you simply scroll to that date.
in a very perfect world, all your other imports are already tagged, so just have to create a smart list 'unrated' ...
(I know those messy Events… a friend of mine constantly ignores my advice to check the time/date on his camera; on every battery swap, the cam creates a very erratic timestamp ... his actual recordings are listed as made in "2004" or in "2020" .... ) -
How to Purchase group configer in dev system and how to traverse quality
Hi All
I need ur help regarding for how to configer the Purchaseing group in dev system and how to traverse to Quality and production.
Thanks
HappyHi,
You can create the Purchasing Groups using the following settings.
SPRO-MM-Purchasing-Create Purchasing Groups.
Create a new entry for Purchasing group & save it in a Transport request & transport it to QAS & PRD.
Note: We define the Purchasing Groups @ client level
Thanks & Regards, -
Why are the Creative Cloud system and the Adobe Support system so expensive and so gawdawful lousy?
Free market at work in a gullible or irrational population.
-
How to Configure logical path and how to retrieve physical path for an IDOC
Hi ,
I want to configure logical path for an IDOC,
and then I need to retrieve Physical path from this logical path
using a FM (eg. FILE_GET_NAME).
How to configure the logical path for an idoc ?
Regards ,
Harshit RungtaUsing Logical Files in ABAP Programs
To create a physical file name from a logical file name in your ABAP programs, use the function module FILE_GET_NAME. To insert the function module call in your program, choose Edit ® Insert statement from the ABAP Editor screen. A dialog box appears. Select Call Function and enter FILE_GET_NAME. The parameters of this function module are listed below.
Import parameters
Parameters
Function
CLIENT
The maintenance tables for the logical files and paths are client-dependent. Therefore, the desired client can be imported. The current client is stored in the system field SY-MANDT.
LOGICAL_FILENAME
Enter the logical file name in upper case letters that you want to convert.
OPERATING_SYSTEM
You can import any operating system that is contained in the list in Transaction SF04 (see Assigning Operating Systems to Syntax Groups). The physical file name will be created according to the syntax group to which the operating system is linked. The default parameter is the value of the system field
SY-OPSYS.
PARAMETER_1
PARAMETER_2
If you specify these import parameters, the reserved words in the physical path names will be replaced by the imported values.
USE_PRESENTATION
_SERVER
With this flag you can decide whether to import the operating system of the presentation server instead of the operating system imported by the parameter OPERATING_SYSTEM.
WITH_FILE_EXTENSION
If you set this flag unequal to SPACE, the file format defined for the logical file name is appended to the physical file name.
Export Parameters
Parameters
Function
EMERGENCY_FLAG
If this parameter is unequal to SPACE, no physical name is defined in the logical path. An emergency physical name was created from table FILENAME and profile parameter DIR_GLOBAL.
FILE_FORMAT
This parameter is the file format defined for the logical file name. You can use this parameter, for example, to decide in which mode the file should be opened.
FILE_NAME
This parameter is the physical file name that you can use with the ABAP statements for working with files.
Exception Parameters
Parameters
Function
FILE_NOT_FOUND
This exception is raised if the logical file is not defined.
OTHERS
This exception is raised if other errors occur.
Suppose the logical file MYTEMP and the logical path TMP_SUB are defined as in the preceding topics and we have the following program:
DATA: FLAG,
FORMAT(3),
FNAME(60).
WRITE SY-OPSYS.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
LOGICAL_FILENAME = 'MYTEMP'
OPERATING_SYSTEM = SY-OPSYS
PARAMETER_1 = '01'
IMPORTING
EMERGENCY_FLAG = FLAG
FILE_FORMAT = FORMAT
FILE_NAME = FNAME
EXCEPTIONS
FILE_NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE: / 'Flag :', FLAG,
/ 'Format :', FORMAT,
/ 'Phys. Name:', FNAME.
ENDIF.
The output appears as follows:
HP-UX
FLAG :
FORMAT : BIN
Phys. Name: /tmp/TEST01
In this example, the R/3 System is running under the operating system HP-UX, which is member of the syntax group UNIX. The logical file name MYTEMP with the logical path TMP_SUB is converted into a physical file name /tmp/TEST01 as defined for the syntax group UNIX. The field FNAME can be used in the further flow of the program to work with file TEST01 in directory /tmp.
Suppose we have a logical file name EMPTY with the physical file name TEST, connected to a logical path that has no specification of a physical path. If you replace the EXPORTING parameter 'MYTEMP' with 'EMPTY' in the above example, the output appears as follows:
HP-UX
FLAG : X
FORMAT :
Phys. Name: /usr/sap/S11/SYS/global/TEST
The system created an emergency file name, whose path depends on the installation of the current R/3 System. -
Is it possible to restore individual apps and files after clean install of Lion?
My new iMac is one of the small group that is having HDD drive replaced due to issue with 1TB Seagate drives.
When I get it back I'd like to install a clean copy of Lion and not restore whole system from TimeMachine.
However I don't want to lose my iTune or Aperture Libraries. Is it possible to restore just these libraries form TimeMachine backup or is there a better way to go? Email is all IMAP so not an issue, F/Fox & Safari bookmarks and all contacts & iCal material are likewise MobileMe/cloud based so not an issue.
Just after safest and best solution.
ThanksThe short answer is: yes you can restore only these libraries from the last Time Machine backup. It's quite easy
1) Clean install Lion
2) Enter time machine from the menu bar while pressing "option" (Browse other Time Machine disks).
3) Restore the Libraries.
Individual apps are tricker - depending on how they were installed in the first place. Anything that used an installer, and may rely on library frameworks (e.g iwork or MS Office) is not going to work easily with this method. -
Rename of Business systems and channels in PRD system
Hi all,
I am doing a rework of some scenarios in PI. I will rename business systems and channels.
When we move the new objects to Prduction and activate what is the best order to stop processing in PI before the switch over.
Is it
1)Stop PI inbound queues.(Deregister queues)
2)Check all outbound queues are empty.
3)Stop outbound queus (Deregister queues)
4)Stop all channels
5)Import all new objects
6)Delete old configuration and business systems and channels.
7)Activate all new configuration.
8)Activate all channels.
9)Register all queues.
10)Check all sender systems for failed (eg Outbound IDoc) and resend.
Have i missed anything?
What is the best way to handle sender for the following adapter types(HTTP , Proxy, RFC, SOAP)
Thank you for your input.Hello,
The following note provides details on this procedure:
#870864 Starting and Stopping an XI 3.0 / PI 7.0 System
For 7.1:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/12/5dd23aaad7b3408dde3c1577fda5b3/content.htm
Kind regards,
Sarah -
How to createWebservice from Functional Module inECC system and how to test
Hi all
i have one functional module in backend system i.e BAPI_GL_ACC_GETLIST. now i want to create a Webservice from the above functional module. once the webservice is ready in ECC system then how do we access in webdynpro thru model. i want to test the same webservice in ECC system itself, what is the procedure??
can any body send the clear steps on starting from create of webservice and till to access the same in webdynpro.
if we want to access from webdynpro thru model for the same webservice which did in ECC system, is it require to deploy on J2ee engine by creating the same webservice or we can access that directly in Webdynpro??
can you please tell me clear steps on the same rather than documents??
Regards
Suresh babuHi Suresh,
refer This ppt link will help you.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/244e7923-0a01-0010-5887-fe0b0c6dbb8d
Supraja -
How to take flash archive zoned system and how to deployee from jumpstart s
Hi All
How to take flash archive zoned system and that flash archive how to deployee from Jumpstart server
please help me in this,it is very urgent for me
Thanks
Muraliwhen you've created the flar image just setup the jumpstart server accordingly
1) create a profile for a flash installation
install_type flash_install
archive_location nfs js1:/data/server.flar
partitioning explicit
filesys c0t0d0s0 2000 /
filesys c0t0d0s3 6000 /usr
filesys c0t0d0s4 2000 /var
filesys c0t0d0s5 2000 /export/home
filesys c0t0d0s6 520000 /export/zones
2) create the jumpstart client just as you would normally
3) jumpstart the server
As far as i know this should work -
No username of Source system is avbl after livecache system copy
Hi Experts
I have done a livecache system copy from the source system to target system. Here the steps are
Assume my Source SYstem Livecache is RP1 and Target System livecache is RS1.
1. Taken Source system livecache DATA and LOG Area backup RP1.
2. Defined the same source system backup medium name in Target System (RS1 and moving the Source system Liveacache backuped files to Target system and defined the medium name as per that)
3. put the livecache db_admin mode
4. db_activate RECOVER <medium_name>.
5. recover_start <log_medium_name> LOG <nnn>
6. db_online.
Here we faced that
ERR
-24622,ERR_AUTOLOADSYSTAB: Automatic loading of the System Tables failed
-24907,ERR_DBAWRONG: Wrong database system administrator
-24988,ERR_SQL: SQL error
-4008,Unknown user name/password combination
So we activated the SUPERDBA as " db_activate SUPERDBA,<password>
then it came to online. and afterwards we have used the load_systab command to load the tables.
BUT we could not find any Source System name like "RP1ADM" in the tables of the livecache database. Only there are CONTROL,SUPERDBA username availbale. Usually there will be also the source admin name . I dont know why it is missing
Before a month we have done livecahe restore same as now in that time we got the source system name admin also. ( RP1ADM) and also tables which owned by RP1ADM. alos i could find APPSYSPARAM table and the instance also registered.
But now in this restore we could not find the above.
We followed the same procedure and there is no change in the steps also.
Could anyone help me...
Regards
balaHello Bala,
1. As I wrote you already, the notes:
886103 System Landscape Copy for SAP SCM
877203 Post steps after the Homogenous liveCache copy using backup/
457425 Homogenous liveCache copy using backup/restore
has all recommended steps to do, when you will run the u201CSystem Landscape Copy for SAP SCMu201D
2. If you run the u201CHomogenous liveCache copy using backup/restoreu201D you should pay attention to the note 457425. After you imported the complete data backup < step 2. > you need to update the system tables.
To update the system tables you need to know the correct database SYSDBA user & password.
After you restored the databackup of the source database, start the database online & run u201Cselect * from usersu201D SQL command to see the SYSDBA user. Then check that you know the DBA user ( DataBase Administrator ) & password of the source database instance => Open the SQL session with this
user & password.
Example:
after db_activate recover <medium_name>
login as control,password
db_online
sql_execute select * from users
sql_connect superdba,<password of source system>
If you didnu2019t get error with the last command, then you could update the system tables with the superdba,<password of source system> using load_systab command.
The system tables will be updated & the correct SYSDBA user & password will be updated in *.UPC file.
3.
user_sysdba:
You make the database system administrator known to Database Manager. It is only necessary to use this DBM command if the database administrator is not known or is incorrectly known to Database Manager.
u201CI have tried like this
after db_activate recover <medium_name>
login as control,password
db_admin
user_sysdba superdba,<password of source system>
db_onlineu201D
You could update the .upc files with the wrong SYSDBA user password u2026
You was lucky, that you knew the correct SYSDBA user and password of the source database.
Example < NLK is my local database >:
A. I could update the .upc file with wrong password of SYSDBA user:
dbmcli -d NLK -u control,control
dbmcli on NLK>user_sysdba superdba,test
OK
dbmcli on NLK>db_online
OK
dbmcli on NLK>load_systab
ERR
-24909,ERR_DBAUNKNOWN: SYSDBA unknown
dbmcli on NLK>exit
B. I could update the .upc file with wrong SYSDBA user:
dbmcli -d NLK -u control,control
dbmcli on NLK>user_sysdba test,test
OK
dbmcli on NLK> user_get test
OK
u2026
dbmcli on NLK>sql_connect test,test
ERR
-24988,ERR_SQL: SQL error
-4008,Unknown user name/password combination
dbmcli on NLK> dbmcli on NLK>sql_connect superdba,admin
OK
I could connect as test,test; but the test user is NOT SYSDBA user u2026
dbmcli -d NLK -u test,test
dbmcli on NLK>
Itu2019s recommended to user the load_systab command, so the .upc files will be updated with the correct SYSDBA user/password or
you will get error.
4. http://maxdb.sap.com/doc/7_7/86/68627a1bc642e6a6f73d3bc7a55fe1/content.htm
You got error:
ERR
-24622,ERR_AUTOLOADSYSTAB: Automatic loading of the System Tables failed
-24907,ERR_DBAWRONG: Wrong database system administrator
-24988,ERR_SQL: SQL error
-4008,Unknown user name/password combination
The automatically updating the system tables, according to the default value, is switched on.
After you will run the update system tables with the correct SYSDBA user & password the *.UPC file will be updated,
and with the next liveCache restart you will not get this error.
5. See more information in the MAXDB library:
http://maxdb.sap.com/doc/7_7/45/11cbd6459d7201e10000000a155369/content.htm
Thank you and best regards, Natalia Khlopina
Edited by: Natalia Khlopina on May 19, 2010 2:58 PM -
Re: Data Exatraction form R/3 - One BW system and Multi R/3 systems
Hi Experts,
In my current project there is a requirement to bring data from two different R/3 clients(systems) into one BW sytem.
The inforsouce is the same. For example The FI GL data needs to upload into BW through the Infosource 0FI_GL_4 from two different R/3 clients ; 100 and 150. Is it possible?
Curreny set up is to bring data only from R/3 system 100. Now the requirement change and have to bring data from R/3 system 150. This is the situation in production client.
Please advise and share your view.
Thanks in advanceIt is possible.
You have different logical system name in different R/3 system (or client), in the infosource you should add logical system infoobject.
By this way even you loaded data from multi R/3 system into single data store (eg. same InfoCube), you are still able to distinguish the source of the data by using logical sysetm infoobject.
You should find in the BI content, many of them had the logical system infoobject already.
Maybe you are looking for
-
TS1424 My iPod wont download apps it tells me "cannot connect to iTunes " what should I do?
my ipod wont let me download apps it tells me its bot connected to itunes what should i do?
-
Wireless drivers will not work properly in Win XP
Hi, I have a late 2007 white macbook and when I got the computer then I immediately installed Windows XP so I could have Microsoft Office. When I did so I installed the Boot Camp Drivers from the Mac instal disc 1. It worked fine for about a year, I
-
Where do I find my Update Adobe Photoshop CS6 downloaded on my computer
where do I find my Update Adobe Photoshop CS6 downloaded on my computer. because when i work on my computer without an Internet connection i can update also when i make formate again i can update. thank y
-
Problem: Web.Show_Document with separate frame = True
We run our application in a seperate frame, so the applet is running outside our browser. When I change the URL in the browser-window the Forms Built-In Web.Show_Document does not work anymore (no browser window will be shown). Is it possible to solv
-
Any way to change speed of a clip in "over-write edit" mode?
I want to change the speed of a clip in the timeline without having to lock all the other tracks or having to move the other following clips out of sync. For example I have a clip which lasts for 1 sec, which I want to change to 3 secs. Normally when