Is it possible to close a project in FCP 10.1?

Right now I have three projects open. (I can navigate between them using Command + ] or [ )
I am doing quite a bit of copy/paste between the 1st and 3rd projects and would love to close #2.
There doesn't seem to be any way to close a project. What am I missing?

Only by closing the app or closing the library.

Similar Messages

Issue with turning on project 2010 / 2013 - "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."

I get the following error after the installation and configuration window of MS Project: "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."
It happens both with MS Project 2010 and 2013 on a Windows 7 desktop.
I tried installing / uninstalling Office 2010, MS Project, tried installing 32 and then 64 bit versions, clean up, disk error checker, startup changes (msconfig), anti virus, running as Windows 7 and then Windows XP compatible mode.
Nothing helps. I see this issue reported as early as 2007 version of MS projects on Microsoft forums, but I do not see any solution anywhere. Any suggestions on how to fix the issue without having to reformat hard drive? Every other application, including
all other Office programs work seamlessly.
I also tried Microsoft support, after an hour and a half of basically doing what I did before, I was told I have to pay 99$ for "premium" support, so someone can look at this bug.
I have 16 Gb RAM and more than 200Gb or hard drive free, so actual memory is not the problem.

This issue was originally reported with MS Project 2007 and keeps popping up since.
A quick Google search provides more than 200K pages of results of this issue:
https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren't+using%2C+and+then+try+again.
And 193K results on Bing:
http://www.bing.com/search?q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&go=Submit&qs=n&form=QBLH&pq=there+is+not+enough+memory+to+complete+the+operation.+to+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&sc=0-0&sp=-1&sk=&cvid=4cb023c1fbd94ec2bba9821b095f21f2
Computer was defragged already. I run more tests, and specifically when MS Projects tries to run, it tries to take all memory, more than 300Gb, on the computer. (DropBox was running at the same time, and warned that there were no space. As soon as MS Project
stopped attempting to configure itself, everything came back to normal and the available space became available again.)
Looking through older forum posts, looks like this application tries to take "unlimited" amount of memory. Some registry fixes are mentioned potentially, but I was not able to apply them.
Since everything else works, this is a MS Project bug reported by multiple users on various versions of Windows, including Vista and 7, so please provide a fix and not 'not a know bug' lie. All the premium support will say, is to format the hard drive, unless
they have a patch or a registry edit solution. If the latter is true, since the issue exists for multiple years, it should have been already been provided to users.
Also, I am not running a SQL server, or any server, this is an installation on a local machine.

Is it possible to build a project with Labview 2010 on a Windows XP system, that is useful for a system with windows 7 on it?

Hi there,
I am planning to use Labview 2010 in a short time.
But before I'm going to use it I have some questions.
I know it is possible to run Labview 2010 in an XP environment. But is it also possible to, when running Labview 2010 on a XP system, to build a project to a version that is useful in a Windows 7 environment?
Or do I have to run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?
Please give me some information.
I hope to hear from one of you soon.
Regards,
Kenny
Solved!
Go to Solution.

Is it possible to build a project with Labview 2009 on a Windows XP system, that is useful for a system with windows 7 on it?
Thanks.
Philippe B.
Certified Associate Developer / Dépt Moyens d'essais
www.ingenia-system.com

1 new update have been added to the project would you like to close the project and apply these updates message in project 2010

1 new update have been added to the project would you like to close the project and apply these updates message in project 2010.
One of the PM is getting above message and not any recent changes happened?

Hi,
This message appears when an update has been sent for his approval and is pending. It could happen while opening the project plan, or when clicking on something like "retreive tasks updates" from the backstage menu of MS Project Pro.
The PM should go to his approval center and check for any approval pending.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

In Premiere Pro, is it possible to change the project aspect ratio once started?

In Premiere Pro, is it possible to change the project aspect ratio once started?

On a side note, 'projects' do not have as aspect ratio, sequences and footage do. And a project can contain any number of sequences or footage.

Service po short close for project closure

Dear All,
My client has a project which is to be closed but there is committment in service po we have tried to set a final service entry indicator and final invoice still the commitment remains is there any other way that can be closed
Regards,
Reena

Goto ME22N, block that PO line item (select PO line item and lock it), balance commitments will be blocked. Then system will allow you to close the project.
with regards
M Umapathy
Edited by: Maripalli Umapathy on Dec 6, 2011 4:29 PM
Edited by: Maripalli Umapathy on Dec 6, 2011 4:30 PM

Is it possible to make my project exe

dear members
my project is composed of 30 fmx file in addition to
60 rdf file
my question is
is it possible to make my project executable package (setup file that runs under winows98 or xp)
and how?

You will have to contact Wise about getting their software. See the link provided.
We have the clients install the forms runtimes before installing our application.
As an alternative, you can use the Oracle installer to install both the Forms Runtime and the forms files. You need to search Oracle TechNet for the Oracle Installer documentation. The oracle Installer does not build a single executable, but can handle installing both the Forms Runtime and the Application in one step.

Is it possible to start a project in FCE and finish it in FCP?

Hi all!
I am at home trying to work on a school project and was wondering if anyone had experience with working on a project in FCE then sending it to FCP to finish.
Is this possible?
Thanks!

Hello and welcome to the forum.
You can open your FCE project in FCP, but, once you save it in FCP, you can't take it back to FCE.

It should be possible to close a thread without saying it's answered.

It should be possible to close a thread without saying it's answered.
Maybe closed - resolved or closed - not resolved.
Edited by: Mike Angelastro on Jan 29, 2010 6:43 AM

Mark it answered may not mean your question is answered. If you do not satisfy all replies, you simply do not assign any points. Everyone will know it is not answered. You may post the last message as No satisfied answer.
Thanks,
Gordon

Premiere CC 2014 unexpectedly quits every time I close a project

Premiere CC 2014 unexpectedly quits every time I close a project. We edit a lot of high end commercial work and everyone in the office has the same problem. Not impressed, seems so unstable.

I don't think the smartest PP person at Adobe could help you without more information.
What if the tables were turned and I was asking your question and you were an Adobe PP expert.
You would want more information.
Be specific about your situation.

After implementing EHP3, is it possible to close/open MM posting period at

Hi,
After implementing EHP3, is it possible to close/open MM posting period at segment level ? Do you people have any idea?
Is there any way to close/open MM posting period at a level lower than company code?
Regards,
Jayant

No, the period is at company code level. This is same as FI.

How do I make labview quit completely when I close a project?

So in the latest verson of Labview that I have (2012) Labview doesn't quit when you close a project or standalone VI. Instead it opens up a Labview browser that shows recent projects, has links to find drivers, forums, etc.
I want labview to quit when I close a project with the red X. Is there a setting to do that, or do I have to close my project, wait for the Labview browser to finish reloading itself, then quit that?
Ro ma wa ichi ni chi ni shi te na ra zu

apok wrote:
try this...as you press the "red X" , panel closes down with "quit LV" completly shutdown of application only if it is a "stand alone/run time engine" executable
A better way here would be to use the Discard? input. In the RUN_TIME_ENGINE == TRUE case, put in a FALSE constant and a TRUE in the default. If there are no front panels open and there is no code running, the Run Time Engine will shut down. It is a lot cleaner than the Quit LabVIEW function since you can close things down properly.
But from the Dev Environment, CTRL+Q will quit LabVIEW. Otherwise, just close the getting started window when it comes back up. As was said, just because you close your project does not mean you are ready to close LabVIEW.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Opening FCE 4 project in FCP 7? Is it possible?

Hi All
I am on the verge of buying FCE 4 to rough-cut a doc project that will likely end up being finished on FCP. Budget is tight at the moment and my current 'field' machine is too slow to run FCP 7 properly.
I know that FCE cannot export an edit decision list, but that FCE 4 projects can be opened in FCP 6, according to Tom Wolsky (see http://forums.creativecow.net/thread/8/995580).
I assumed that FCE 4 projects could thus be opened in FCP 7 -- but this website http://www.answers.com/topic/final-cut-pro says that FCE 4 is NOT compatible with FCP 7.
Can anyone advise on this? Is it possible to rough-cut a project in Apple Intermediate Codec in FCE 4 and then open this project in FCP 7, re-import footage as ProRes, and finish?
I look forward to your responses!
Adam Welz

Hi Tom
I've split this question into two parts:
A) I'm not entirely sure what the implications of FCE 4 losing 'all timecode' when converting (in this case AVCCAM .mts) files to AIC on import are. Apparently the original timecode is still there -- it's just not visible unless you use a filter like FCE Timecode Display (http://web.mac.com/piero.fiorani/PieroFFCE_Effect/TimecodeDisplay.html).
I'm on a steep learning curve here, so please excuse me if I sound a bit dumb, but does the fact that AIC 'loses timecode' mean that if I open an FCE 4 project file in FCP 7 and try to re-capture media (and convert to ProRes while recapturing) from my original AVCCAM files using FCP 7, that FCP 7 will not know where to find the clips to re-capture?
B) I'm also not sure what you mean by capturing media as DV anamorphic downconverted to retain timecode. Presumably this does not apply to AVCHD footage, as you have indicated elsewhere in this forum (and chapter 16 of the FCE users manual says) that the only transcode (ingest) option with FCE is to convert AVCHD footage (including AVCCAM footage) to full-size AIC? Please clarify.
Thanks for all your help!
Adam
Message was edited by: adamwelz

Is it possible to close the MacBookPro display

Is it possible to close the MacBookPro display without getting it to sleep?
I want to close the display and leave the computer working

Try SleepLess…
http://www.versiontracker.com/dyn/moreinfo/macosx/17893
… else InsomniaX…
http://www.versiontracker.com/dyn/moreinfo/macosx/30315

Error when trying to close the project.

Hello all,
When i m trying to close the project i m getting the error "Complete" is not allowed (NTW 5039365),Message no. BS007
The performance assistent show the message as below.
Diagnosis
The current status of object 'NTW 5039365' prohibits business transaction 'Complete'.
Procedure
To process business transaction 'Complete', you first have to change the status of object 'NTW 5039365' to allow the transaction 'Complete' ('BABS').
This gives you an overview of the system and user statuses that affect the transaction. A transaction can only be executed if there is at least one status that allows it and there is no status that forbids it.
please help me regarding this.

Hi
Check this SAP note
https://service.sap.com/sap/support/notes/1533419
BR/Håkan

Is it possible to close a project in FCP 10.1?

Similar Messages

Maybe you are looking for