Is it possible to combine multiple IR into one Internal order?

Hi,
Is it possible to combine multiple internal requisitions into one internal order in OM? Thanks
Regards
Leo

Oracle Order Management provides one to one mapping between Order and (orig_sys_document_ref & Order source). You may need to go for custom solution to consolidate requisitions to create a single internal sales order.

Similar Messages

How to combine multiple webservices into one WSDL file

Gurus,
I have 4 four webservices(ws1,ws2,ws3 & ws4) defined in XI. Normally in XI when we define webservice ,WSDL file will be generated for each interface. Now I have 4 related interfaces, so 4 WSDL files will generated. Suppose if I have 100 webservices then 100 WSDL files need to be generated & need to send to other party to consume our services, which is very tedious task & to track also. So is it possible to combine related webservices into one WSDL file? Your inputs will be highly appreciated.
Regards,
Santhosh

Hi,
Instead of trying to combine the interfaces, you can try to define your interface mapping with 4 sender interfaces with in one interface mapping . I think this may give you the result you are expecting.
If you want entire content to be in one interface , then, define single interface which can accomadate, all message ocntent of all 4 interfaces.Means your sender message to contain the 4 datatypes internally.
Regards,
Reyaz

HT4059 I'm trying to organize my PDFs in iBooks on my ipad2 and I can't figure out how to combine multiple PDFs into one. Any thoughts?

I'm trying to organize my PDFs in iBooks on my ipad2 and can't figure out how to combine multiple PDFs into one. Any thoughts?

I'm trying to organize my PDFs in iBooks on my ipad2 and can't figure out how to combine multiple PDFs into one. Any thoughts?

What product do I need to just combine multiple pdfs into one pdf

What product do I need to just combine multiple pdfs into one pdf. Thanks

Are these files fillable forms?
Could you need to combine more than 100 MB of files?

How do I turn off automatic bookmark creation when combining multiple PDFs into one?

When I combine multiple PDFs into one, I need Adobe to use the CUSTOM bookmarks I created in the original PDFs. I do NOT want the additional PDF name as a bookmark in this instance. Is there a way to turn this option OFF in Acrobat Professional? I have version 9.

You can not automatically turn off this action nor can you remove the 'file_name.pdf' heading, but you could add a button or menuitem to remove the 'file_name.pdf' from the bookamarks. Yes, it is one more step to perform when combining PDFs, but is you want until you have all of the PDFs combined you only need do it once.
Removing filename bookmarks created by Acrobat by Sean Stewart
From the above article:
"With the release of Acrobat 6 came the ability to create a composite (binder) document from multiple files, (i.e. File > Create PDF > From Multiple Files.) When this is done, Acrobat automatically inserts a new top level bookmark at the start of each new file. The bookmark title will correspond to the source filename of the source file. While this level of separation can be helpful, it is counterproductive when the user wants the bookmark tree in the merged document to be continuous.
"Here's a sample JavaScript to remove the top level bookmarks from the bookmark tree. This script will look for a ".pdf" extension to decide whether to remove the bookmark."
With some additional coding you can add menu item or toolbar button.

Combine multiple drawings into ONE SHEET

Hello, this is a question on Acrobat Pro, ver 8, using Windows XP. I guess I understand how to combine multiple files into a single PDF-file. However, this morning I happened to see the option mentioned in the subject line. When you go to "Combine files" > "Getting started with combined files" and select "CAD drawings" the description reads: "Combine multiple drawings into one sheet that's easy to navigate and print". How can this be done? I need to combine 8 ea CAD drawings (already converted to PDF) into ONE SHEET for printing without having the need taping 8 pieces of paper together. Arranging the drawing within the CAD application is not an option because the files were delivered by a 3rd party company and they only deliver PDFs

Hi Priya,
You can do this by merging the requets.
   1. goto Se10 and right click on the request and seelct merge requests.
   2. It will ask you from request and to request. Give the request names.
   3. After merging first request contents will be added to second request and
       first request will be deleted.
Like that you can merge 3 requests to one request.
Let me know if you want more info.
Thanks & Regards,
Siri.

How can I combine multiple pdfs into one document?

I need to consolidate multiple docs into one. How do I do that?

It's pretty easy. Open multiple PDF documents in Apple Preview that came with your Mac. Choose View/Thumbnails so you can see the page thumbnail icons. Select any number (or all) of the page thumbnail icons of one document and drag them to any point in the thumbnails of another document.
For example you can drag page 6 of one PDF between pages 40 and 41 of another PDF doc. But it sounds like you want to select all pages of one PDF and drag them to the end of another PDF doc.
If you need more powerful document combining you can use PDFpen or Adobe Acrobat Professional, but they cost money.

When combine multiple PDFs into one, some letters are missing and display wrong letter

Hi all. I get a problem with combine multiple PDFs into a single PDF document. There are some PDF documents and they are working fine to open each document separately. But after I use Adobe Acrobat 8 Standard to combine them into one, some letters are missing and some display wrong letter (e.g. "forums" display "fo ums"). Our company has Adobe Acrobat 8 Standard, Adobe Acrobat 7 Professional and Standard. But all of them have some problem. Does anyone have idea for that? Please help me! Thanks very much!

I have a similar situation, but my PDFs look fine in Acrobat Pro 8,Acrobat Reader 8, and Apple preview, but are missing letters in Acrobat Pro 7. I think it stems from the files being combined all having the same font, but each having a unique subset stored in the respective files, but with the same name (and ID?), and when they are combined, the character sets are getting hosed somehow.

Combine multiple jars into one product jar

Hi everybody,
I use multiple third party jar APIs in my applet project. When I built the project, I get one product jar and the other jars in LIB folder. I am wanna produce only one jar including other jars inside. I use netbeans.
Shortly How can I combine all jars into one jar ?
Thanks...

woaw, Got it: http://www.oracle.com/technetwork/articles/javase/single-jar-141905.html
Other jars were signed jars in project. Now, I got only only one jar and unsigned.
If I sign this unique jar, will I see a problem ?

Selecting from multiple tables, into one internal table

Hi,
What is the best & most efficient method of selecting from multiple table (in my case 6,) into one internal table?
Thanks,
John
Points will be rewarded and all responses will be highly appreciated.

I have simple example :
First one - Join 5 tables
data : f1 type i,
          f2 type i,
          f3 type i.
start-of-selection.
get run time field f1.
write the query 4 or 5 tables join.
get run time field f2.
f3 = f2 - f1 ( Total time).
Second one - joins 3 table and use for all entries
data : f1 type i,
          f2 type i,
          f3 type i.
start-of-selection.
get run time field f1.
write the query 3 tables join and use for all entries
get run time field f2.
f3 = f2 - f1. ( Total time )
Finally you can have time diffrence between the both sql statement.

Combining multiple projects into one larger project?

If I have multiple separate projects and now want to combine them, edits, titles and all into a larger project, is it possible? I expected that it might be possible to drag one project into another and place it intact onto the timeline for the new project. Since every combination of dragging a project around has evidently failed to accomplish what I'm expecting... is there a way to do this?

welcome phiphika to the  board…
in terms of convenience, I would indeed export/share all 6 movies.
to tape, or as Quicktime/FullQuality…
both methods create a lossless copy of your final movie(s).
in step II, import all 6 project into a new iM project, as said above, you don't loose ay quality with that back'n forth copying... only some time ;-)… you can set then chapter markers etc....
besides, your workflow is as mine on larger projects: not 678 clips into one monstrous project of some dozends Gigabytes, just segments…

Combine Multiple Worksheets into one table

Hello Everyone!
I have 2 Excel worksheets within the same workbook. Both have identical tables with almost the same fields except for 2 or 3 different columns in one of the sheets. Currently I have a macro assigned to a button on one of the sheets and I have to click on
it to combine the 2 sheets. I also have a Pivot Table on one of the sheets which pulls data from the table on that sheet and displays it on the existing sheet.
I wish to :
1. Combine (merge) these two sheets into one table on a new worksheet when Excel file is opened rather than clicking on the button.
2. Once the Excel file is opened, i would like to have the Pivot Table to pull data off the combined sheet and display it next to the combined table. Essentially I would like the Pivot Table to be refreshed with the new data from the Combined table rather
than from one table.
Is this possible ?
I use the following code to combine the two sheets, but I don't know how to proceed further. Can someone please help me with the rest ?? Thanks in advance.
Here's the code:
Option Explicit
Sub Combine()
Dim J As Integer
On Error Resume Next
Sheets(1).Select
Worksheets.Add
Sheets(1).Name = "Combined Results"
Sheets(2).Activate
Range("A1").EntireRow.Select
Selection.Copy Destination:=Sheets(1).Range("A1")
For J = 2 To Sheets.Count
Sheets(J).Activate
Range("A1").Select
Selection.CurrentRegion.Select
Selection.Offset(1, 0).Resize(Selection.Rows.Count - 1).Select
Selection.Copy Destination:=Sheets(1).Range("A65536").End(xlUp)(2)
Next
End Sub
The problem with being punctual is, there's nobody there to appreciate it !!!

Hi,
This is the forum to discuss questions and feedback for Microsoft Excel, the issue is more related to Excel DEV. I'll move your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Combining multiple HDs into one big 'un

So I see where one can make multiple libraries and one can have multiple devices, multiple accounts etc etc... but here's my question. I have an external HD that is holding all my media and is running out of room... Is it possible to "daisy chain" some drives together (i.e. LaCie d2 Quadras, both at 320 GB) and have iTunes read this as one 640 GB drive? In essence so that when I open iTunes and proceed to play content, I don't have to switch out to get it to shuffle music around... I'll prolly end up buying a TB drive but I wanted to ask some of the more enlightened folk on the boards... 'preciate any info!
Cheers!

If you go into the iTunes preferences, you can set the location of the iTunes library. What isn't immediately apparent to most people is that this setting only sets the location of FUTURE additions to your library. Anything already in the library will remain where it is and continue to be accessed from that location.
So to answer your question, you can add an additional drive, point iTunes to a location on the new drive, and everything already in your library will stay on your current external drive. Anything new will be added to the new drive.
Once you get your BIG drive that can hold everything, you can change the location to that drive. NOW use the consolidate command which will then copy everything NOT in the current iTunes library location to that location. In other words, anything stored outside the currently set iTunes folder location will then be copied in there and the library updated to reflect the new location.
You can not delete the stuff off the other drives if you wish.
Cheers,
Patrick

Combining multiple SWFs into one then optimize file size

I am new to Flash and have been asked to combine six
different SWF files into one. What is the best way to do this? This
seems like the file size would blow up. Can anyone share some
thoughts on how to optimize the final file size so that it is
managable?
Thanks

Ok I will take the last question first, since that is probably the easiest.end
A merged file or a flattened file is the same thing as a composite.
A merged file still has its transparency and data that is outside the canvas area.
A flattened file is a merged file that is converted to a background layer that does not support transparency or data outside the canvas.
A composite can be a merged copy of the existing layers if you use the multiple key strokes I mentioned above. Whereas a merged file is a composite of the original layers. So I personally use the term composite to mean a copy as merged and flatten already explain that process, no need to give them an additional term to mean the same thing.
Generally blend modes work by selecting individual layers before changing the blend mode. However you can group the layers or convert them to a smart object and apply a blend to that group or object.
Normally you set the blend mode as you work on each layer. But you could set all of them to overlay or reduce the opacity to 30 or 50 percent to see through all the layers, then adjust them later on.
I am not sure how it works on the mac, but on windows you can select the blend text box then use the up and down arrow keys to change the blend mode to see how it looks.
I recommend that you go through the free videos on layers, masks, opacity, and layer styles. This will help you dramatically. Also a few books on the subject will help has well.
(free)
http://creativesuitepodcast.com/
http://kelbytv.com/
http://tv.adobe.com/
http://www.youtube.com/
(pay)
http://kelbyone.com/
http://Lynda.com

Stop iTunes from combining multiple albums into one? Or easily reordering tracks once combined?

I'm trying to put a 4-cd compilation of b-sides into iTunes, but iTunes is combining them into ONE huge album. This is only a problem because there are now four Track 1s, four Track 2s, etc. What is the easiest way to fix this? I do NOT want to go through track by track changing them to the correct numerical order. :/ AN help?

Hi Mhwal. I think this may help you.
Here's a test for you to try.
Make sure your iTunes library is updated with your edited album names;
Find a song on your iPhone where the album name is incorrect;
Delete the song from your iPhone;
On your iPhone go to "Settings>iTunes & App Store" and tap your Apple ID (highlighted in blue).
Tap "Sign Out";
Go back to your iTunes library and select the song/album that you want back on your iPhone;
The iPhone should now show your edited album tag;
Once your done you can sign back to "Settings>iTunes & App Store" and sign back in. Your edits will hold.
In addition, this also works with artist pictures. I did not like the stock images iTunes associated with my artists - I wanted album art instead. After you sign out of your Apple ID, when you move a song/album from your iTunes library to your iPhone the FIRST album you move over will be associated with that artist.
For example, I have seven AC/DC albums but I want the cover of "Back in Black" to be associated with AC/DC on my iPhone's artist listing. After I've signed out of my Apple ID, I transfer "Back in Black" to my iPhone and then the other six albums in any order. "Back in Black" will be the album picture associated with AC/DC on the artist page.
Just remember, after your changes you can sign back into iTunes through "Settings>iTunes & App Store" and your changes to edited albums and artist cover art should hold.
I hope this helps!

Is it possible to combine multiple IR into one Internal order?

Similar Messages

Maybe you are looking for