Is it possible to configure 2 SSIDs without using multiple VLANs?

I am trying to set up a 1231G to allow normal users to connect using WEP and visitors to connect with no encryption in guest mode. Using one SSID, I can get one or the other to work using the guest-mode command on the SSID, but have the problem that WEP mandatory or optional on the radio interface disables either the normal user or the guest. If I set up 2 separate SSIDs for each of these user groups is it necessary to assign a separate VLAN for each to make this work? The AP is on a network that is not trunked.
Thanks for any help or direction you can give me.
--Sara

Hi Sara,
Hopefully the attached docs will answer your question:
Cisco Aironet 1200 Series
Using VLANs with Cisco Aironet Wireless Equipment
Deprecated versions of Cisco Aironet software permit binding multiple SSIDs to one VLAN. Current versions do not.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801d0815.shtml#
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points, 12.2(15)JA
Configuring Multiple SSIDs
vlan vlan-id
(Optional) Assign the SSID to a VLAN on your network. Client devices that associate using the SSID are grouped into this VLAN. You can assign only one SSID to a VLAN.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a00802085c4.html
Also this answer from Cisco Aironet 1200 Series FAQ;
Q. How many service set identifiers (SSIDs) can you have per VLAN?
A. You can have only one SSID per VLAN. The use of multiple SSIDs over a single VLAN is not supported with Aironet APs.
Hope this helps! (sorry to be the bearer of bad news)
Rob
Please remember to rate helpful posts.......

Similar Messages

Is it possible to create .ncd file without using MAX?

Is it possible to create .ncd file without using MAX? I am trying to read the data given by hundreds of possible Arb. IDs on one of the CAN port without having to create it from the MAX.
Thank you

Hi,
the NI-CAN driver software does not provide functions/VIs to generate
*.ncd files. However the *.ncd file format is just plain XML (ASCII text). Take a
look at the example.ncd file that gets installed with NI-CAN
(<ProgramFiles>\National Instruments\NI-CAN\):
<?xml version="1.0" encoding="UTF-8"?>
<nican_config version="0.1">
<saved>8/8/2005,17:58</saved>
<message name="TransmissionFluids">
<id extended="0">82</id>
<dbc>C:\Program Files\National Instruments\NI-CAN\example.ncd</dbc>
<conflicts>0</conflicts>
<bytes>6</bytes>
<interface>1</interface>
<comment></comment>
<channel name="ClutchPressure">
    <conflicts>0</conflicts>
    <bitfield start="0" bits="8" order="0" type="1"/>
    <linear_scaling factor="1.600000e+001"
offset="0.000000e+000" max="4.000000e+003" min="0.000000e+000"
default="0.000000e+000" unit="kPa"/>
    <comment></comment>
</channel>
</message>
</nican_config>
Thus, you could generate *.ncd files with simple file I/O. Having XML-specific file I/O functions simplifies this task.
-B2k

Is it possible to display unrelated info without using a subreport?

Hi,
I'm trying to create a report that displays 2 different sets of information without using a subreport.
The first section of info (the part I'm having trouble with) is simple displaying the info in the db. It is just the differnt security settings of the system.
The second section of info is each users info and their personal security settings. This part is not a problem and displays correctly.
How can I get the first section to be displayed at the top of the report without it affecting the second section which uses the group header and details portion of the report? When I try and put it in the Page header it throws off the second section and causes the information in the details to be repeated multiple times.
Is it possible to do this without a subreport? I'm using Crystal Reports 2008.
Thanks Mike
Edited by: Mike Swift on Aug 21, 2008 5:35 PM

Mike
Have you tried selecting the "Select Distinct Records" box in report options.
Maybe this has nothing to do with your problem but I thought I would throw that out.
Good luck

Is it possible to install Windows 7 without using BCA to install drivers and using the support 5 software for drivers on my iMac 2014?

What I am wondering is if I can install Windows 7 on my iMac 2014 without using BCA to install drivers and using the manual download Support software without bricking my system. The issue is that I recently moved into the country without a reliable data connection, so I'd like to download all the drivers from when I'm in town generally. Any info is appreciated.

Mikhailov wrote:
Hello,
I'm trying to purchase inexpensive computers for my classroom. One of the computers I'm looking at is the new $200 HP Stream 11. My school's IT department said it might be difficult to install the district's copy of Windows 7 on these computers if I purchase them. Does anyone know if it's actually possible to uninstall Windows 8.1 and install Windows 7 using an external USB or external CD Rom Drive? Any help would be greatly appreciated.
The District is right to say what they told you they can't install Disctrict Windows 7 on your computer because they have a license agreements with MS and doing so will violate their Terms of Agreement. And you shouldn't be asking something like that to start with. If that laptop can't install Windows 7 it then your stuck with WIndows 8 unless HP has downgrade to go back to Windows 7 on it otherwise if none exist you will not get any drivers or support for it. You best luck is to find a used Windows 7 laptop and order the HP recovery media for it and wipe it clean to factory install and register it to you and that will give you a Windows 7 maching to start with.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Is it possible to sync a clip without using multicam ?

Hi there,
I have some video clips recorded on 2 videos, we just say Video A & B.
On the timeline, I mostly used clips from Video A.
But for one 10 sec duration I prefer clip from Video B.
How to I sync this 10-sec clip form video B to video A without using multicam and without using the trial & error method to match the audio wave. I am looking for a sync function, is there one ? One where you click sync and the clip auto move the clip to match. (Just like how you do in in mulitcam editor where u select the clip to sync with the clip in monitoring angle).
Is it possible ?
Thanks

Russ H wrote:
If I understand correctly, you want the 10 second B clip synced to As audio. In other words, are you using A's audio throughout your project?
Yes that is correct ...
Russ H wrote:
If that's the case, I'm not sure why you wouldn't just make a short multiclip and over-write (or replace) what's currently there. That would be the easiest. The manual way would only be slightly more difficult; stack them with a connect edit; zoom in and align the wave forms.
Yes, I want to put the short clip B over A. But I want to avoid the difficult way of stacking it up bcos the positioning is always not synce. Very cumbersome to match the audio waveform.
But before I make a short multiclip (I assumne you mean compound clip), I still need clip B to sync to clip A. With only one B clip, I do not want to create a multicam ...
Thanks Russ, any ideas ?

Is it possible to develop struts application without using JPF in workshop 8.1?

Hi,
Is it possible to develop application based on struts framework without using
Java Page Flow in workshop 8.1?
I developed one application without using JPF , but it is showing some Deployment
errors.
rgds,
girish

Girish--
Sure, though, I'd still encourage you to take a look at JPF. :)
If you remove the JPF runtime files from WEB-INF/, WEB-INF/lib, and JPF specific entries in
web.xml, you can start defining a struts-config.xml file against the Struts 1.1 runtime in the
webapp, or you can replace that with a different version as you need. You'll also need to define
the Struts runtime in web.xml including the servlet, taglibraries, etc.
One note, the JPF flow view and other JPF specific editors don't work over a normal
struts-config.xml file.
Hope that helps...
Eddie
Girish wrote:
Hi,
Is it possible to develop application based on struts framework without using
Java Page Flow in workshop 8.1?
I developed one application without using JPF , but it is showing some Deployment
errors.
rgds,
girish

Best way to ensure combinations from the ValidationSet parameter attribute are processed correctly in PowerShell without using multiple IF statements?

I have an advanced function I have been working on that looks something like this:
Function Do-Something
[cmdletbinding()]
Param
[Parameter(Mandatory=$true,
[ValidateSet('Yes', 'No', 'Y', 'N', IgnoreCase = $true)]
[string[]]$Param1,
[Parameter(Mandatory=$true,
[ValidateSet('Yes', 'No', 'Y', 'N', IgnoreCase = $true)]
[string[]]$Param2,
[Parameter(Mandatory=$true,
[ValidateSet('Yes', 'No', 'Y', 'N', IgnoreCase = $true)]
[string[]]$Param3
Begin {}
Process
My question is, how do I get the values such as "Yes", "Y", "No", and "N" that's located in the [ValidateSet()] validation attribute processed correctly without having to use multiple "If" and "ElseIf"
statements.
For instance, I want to avoid the following, because I know there is a faster and more efficient way (less typing) to do it:
If ($param1 -match "Yes" -or "Y" -and $param2 -match "Yes" -or "Y" -and $param3 -match "Yes" -or "Y")
#Do something here
ElseIf ($param1 -match "No" -or "N" -and $param2 -match "Yes" -or "Y" -and $param3 -match "Yes" -or "Y")
#Do something
I was reading that splatting may help me here, but I am new to the splatting technique and need some help with this one.
I appreciate any help that anyone can offer.
Thanks

Is this what you are trying to ask how to do? Your posted script is written incorrectly and will not work at all.
Function Do-Something{
[cmdletbinding()]
Param (
[Parameter(Mandatory=$true)]
[ValidateSet('Yes','No','Y','N')]
[string]$p1,
[Parameter(Mandatory=$true)]
[ValidateSet('Yes','No','Y','N')]
[string]$p2
Begin{
Process{
# parse the strings to booleans
$p1a=if($p1 -match 'Yes|Y'){$true}else{$false}
$p2a=if($p2 -match 'Yes|Y'){$true}else{$false}
if($p1a){Write-Host 'P1 is good' -ForegroundColor green}
if($p2a){Write-Host 'P2 is good' -ForegroundColor green}
if($p1a -and $p2a){
Write-Host 'All conditions met' -ForegroundColor green
}else{
Write-Host 'Conditions not met' -ForegroundColor red
PS C:\scripts> Do-Something Y n
P1 is good
Conditions not met
PS C:\scripts> Do-Something n n
Conditions not met
PS C:\scripts> Do-Something y y
P1 is good
P2 is good
All conditions met
This handles case and creates a tracking Boolean fo reach parameter so you can just build simple logic.
¯\_(ツ)_/¯

Is it possible to update my iPhone without using a computer?

Hello, new iPhone user here!!
I'd like to update to the latest iPhone software, currently I'm on 4.0.2 I think but want to go to 4.1!
I've not got access to my computer though assist in storage for 3 months!! I've got wi fi though, is it possible to update the phone or not?
Thanks

Ah brilliant thanks for the quick reply, looks like a long wait for me then ha!!

Is it possible to read native encodings without using native2ascii

Hi All,
I have a text file containing japanese characters saved in a UTF8 format. I can read this into my java application after converting it using the native2ascii tool.
However i'm wondering whether i can read this directly into my java application without going through the native2ascii tool since this file is already in UTF8 format. I have tried, but it doesnt work. Please advise.
Thanks.

You missed reading the java.util.Properties documentation:
"When saving properties to a stream or loading them from a stream, the ISO 8859-1 character encoding is used. For characters that cannot be directly represented in this encoding, Unicode escapes are used; however, only a single 'u' character is allowed in an escape sequence. The native2ascii tool can be used to convert property files to and from other character encodings."
What's so bad about using native2ascii?

Is it possible to install Flash extension without using the Extensions Manager?

I am so frustrated with Aodbe releasing new versions incompatible with older versions! I work with Flash CS3. There are many good reasons why I cannot and don't want to upgrade. I have recently updated to Mountain Lion. Everything is good except that the extensions manager 1.8 (CS3) doesn't work on Mountain Lion - it crashes. But all the newer Extensions Managers don't see any older versions of Flash. So basically I cannot install any of the extensions, which are essential to my work!
I am thinking going back to Snow Leopard because of this ridiculous issue. Unless there is any other way to install extensions into Flash CS3...

I am not sure whether the root cause for EM CS3 crashes is the same as EM CS5/5.5 on Mac 10.8. If the root cause is the same and you have installed InDesign CS3 and don't need install extensions for it, you can rename XManConfig.xml under InDesign folder to anything, then EM will not try to import pre-installed extensions for InDesign, EM should start up correctly. If you have to install extension for InDesign, you can remove all pre-installed extensions of InDesign, which should be located in "/Library/Application Support/Adobe/InDesign/Version XXX/<Locale>/Extensions" (I haven't installed InDesign CS3, so the folder may be a little different).

Only one SSID broadcasted using multiple radios, multiple SSIDs.

This topic has been kicked around quite a bit, but I still can't find the answer. I have a Aironet 1200 with the internal 802.11b radio and an upgrade 802.11a radio. I've defined two SSID's, one for each radio. The status page shows both radios as up, but the 802.11b radio is the only one I can use. The upgrade radio doesn't broadcast the SSID, nor will it allow me to connect to it if I manually type in into my suplicant configuration. What's the trick to getting this to work? My 1200 is running IOS 12.3(7)JA2.

Hi Dennis,
issue the command
show controllers dottRadio 0 (maybe 1 too, depending on your interfaces setup.)
Multiple basic SSIDs are supported if the results include this line:
Number of supported simultaneous BSSID on radio_interface: 8
I may be wrong, but afaik the mbssid command is supported with version 12.3(4)JA or later.
Hope that helps
Best regards,
Frank

Can you split internet bandwidth without using any vlan?

i have a Catalyst 2960, 3560v2, Cisco 3600 and Cisco 3900.
I wanted to split the 10mbps from the isp connected to two routers the 3600 and 3900. any suggestion on how to configure this?
Posted by WebUser Steven Bardies from Cisco Support Community App

You posted a route/switch question to the contact center community. I suggest you move this to a more appropriate area of the forum.

Sending mails without using sendmail service. Is that possible?

Hi all,
I am considerably new to Solaris.
I have a query,
Is it possible to send mails out without using sendmail service?
If so how can they be implemented in,
Solaris 7?
Solaris 8?
Solaris 9?
If it is not possible, are there any workarounds to achieve this or else this cannot be implemented at all?
It would be really great if someone could shed light on this query.

Your question is a little ambiguous. However, I will try to answer it.
You need to use a program to send the email for you. On Solaris by default this is sendmail. However, it can be used in a number of modes.
1. It can be run as a daemon, listening on port 25 for new messages to be delivered to it.
This is enabled by default but is not necessary for sending email. If you wish to switch sendmail off as a service in Solaris10 then you should type 'svcadm disable svc:/network/smtp:sendmail'. If you wish to switch it off on earlier Solaris releases you will need to move/erase the startup script in either /etc/rc2.d or /etc/rc3.d.
2. It can be run in 'immediate mode' to send mail immediately.
This allows you to send a mail directly to someone. On a normally configured sendmail instance it will try to deliver the mail immediately - if the server at the other end is unavailable, the mail will be queued locally to be potentially delivered at a later date.
3. It can run in delivery only mode to attempt to send queued mail
Queued mail will not automatically get processed. Sendmail needs to run at a later date to attempt to deliver any queued mail. This can either be done via cron using 'sendmail -q' or sendmail can be left running the whole time and told to rerun the queue in given periods ie 'sendmail -q15m'
There are alternatives to sendmail for delivering mail - postfix, exim, qmail are just three examples. I would advise against trying to deliver mail without using a specific mail agent to do it. Whilst the SMTP mail protocol is pretty simple in basic use cases the protocol does get complex. There is no real downside in using an established program.
HTH.

Configure a database without installing grid agent

Hi,
is this possible to configure a database without installing grid agent
regards,

maja wrote:
Hi,
is this possible to configure a database without installing grid agent
regards,With grid agent you mean the agent for the Grid Control ? If yes, the answer is yes , you definitely can create a database without it.
Aman....

DAC output without using DAC configure mode

Hi,
I am using NI-5640R and labview 8.2.
Is it possible to send out anything without using DAC configure (single or quadrature) mode?
Actually, what I am trying to do is to send out to DAC whatever comes in, like attachment
Ahmet
Attachments:
ADC to DAC (FPGA).JPG ‏36 KB

Hi there:
I am also using the the NI PCI-5640R and I've been "studying" the program: "Frequency Translation", my intention is to modify it and produce a closed-loop between I and O.
I am also interested in transferring what i am reading through the
input port, directly to the output port but filtered and with a
phase-shift (final Objective: Q-Control).
I need to visualize the signal in the HOST, so I need both FIFOS (DMA FIFO and Local FIFO), and the "Quadrature Mode DAC Configure"
I would like to know:
1. How can I directly transfer the data acquired through the ADC port into the DAC? (it is unclear due to the Event structure in the "Frequency Translation" example)
2. How can I configure the "Quadrature Mode DAC Configure.vi" for it to bandpass-filter the signal comming from the ADC at a given frequency and BW, specified by the user in the HOST?
3. Is it possible to configure the "Quadrature Mode DAC Configure.vi" to produce a phase-shifted signal (phase shift also specified by user in the host)
I've been working for almost 2 months trying to program the 5640R, doing examples, and modifying them. After playing with different examples I've come up to the conclusion that the "Frequency Translation" example is the one that best-suites my application. My problem now is that I AM LOST because i need more information regarding the configuration parameters of ALL the different VI's inside the NI-5640R VI Tree to exploit them correctly, specially the "Quadrature Mode DAC Configure.vi".
Can anyone please help me?
Cheers, Antonio

Is it possible to configure 2 SSIDs without using multiple VLANs?

Similar Messages

Maybe you are looking for