Is it possible to configure IDOC with Business service

hi
Is it possible to configure IDOC with Business Service
Thanking you....
aravind...........
<Interview question locked, please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]>
Edited by: Mike Pokraka on Sep 18, 2008 9:25 AM

Hi Chary,
Check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
Regards
Seshagiri

Similar Messages

Can we design the scenario with Business service

Hi,
I have IDOCXIFile Scenario
Can we design the scenario with Business service for SAP R/3 and As well as for File system also????
I dont have details abt the SAP R/3 system to create the Tech system in SLD
Regards
Suman

Hello Suman,
Go through this Blog..
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
These are the steps which u have to do
STEPS IN DESIGN
1. Import idoc from the SAP System (SAP02) through imported objects.
2. Create Data Type, Message Type, Message Interface for the Outbound File.
3. Create Message Mapping with file Message and idoc (Matmas04)
5.Create Interface mapping between File Interface and the idoc.
Steps to be followed in Creation of Technical and Business System
Technical System
In SLD, click on technical landscape->New Technical System->WebAS ABAP.
Business System.
1.Goto Business Landscape->New Business System->Name the business system.
2. Choose the technical system that needs to be attached->WebAS ABAP->Technical System Name.
Preconfiguration steps for transfer of data to IDOCS
1.Create a RFC Destination in SM59 of XI Server of type.
2.In transaction IDX1 ,create a port for the client of XI server.
3. The port has to be displayed in the idx2 transaction and we should be able to view the idocs which we imported through integration repository.
Steps in Configuration
1. Goto service without party, right click->Assign a business system.
2. Choose the business system to be added.
3. Create a File Sender Service with communication channel for the same.
4. Create an idoc receiver channel under the business system.
7. The Idoc type( which data is to be written) is mentioned as inbound parameter.
8. Mention the logical Name in the Service->Adapter Specific Parameters of both the File Sender Service as well as the business system.
9. Make the Sender Agreement for theFile Sender with communication channel.
10.Create the Receiver Determination and Interface Determination for the business system.
11.Create the Receiver Agreement for the Business system.
Step for Configuration fo IDOC in R/3
SM59-rfc destination
IDX1-port
IDX2-load metadata
we05-IDoc status records
BD54-Create Partner Number
We20-Create Partner Profile
WE19-Testing IDoc Processing
Do these configurations in R/3 and in XI...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Reward Points if it is useful..
Thanks,
Satya Kumar

Logical system with business service

hi,
can we have a logical system with business service just like we have with business system?? If yes,how can we create logical system for business service??
Ratna.

Hi,
If you intend to use it with IDoc adapter it might be also necessary to set up corresponding Logical System (tcode: BD54) in adequate backed system.
Refer conversion routine (logical system vs. service) in this presentation [Using the IDoc-Adapter|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b2b4035c-0d01-0010-31b5-c470d3236afd] - page no 6.
Regards,
Jakub

Read Timeout is not working with business service in OSB 11.6

HI All,
We have set below configuration in "Http Transport Configuration" of a business service.
Read Timeout- 8
Connection Timeout - 8
Authentication - None
Proxy Serve
Follow HTTP redirects - Disable
Use Chunked Streaming Mode - Enable
Even though backend is taking more than the configured value in Read Timeout but timeout is not happening in OSB, Connection time out also not worked, when we tested with wrong backend URL.
Any help for this configuration would appreciated.
Thanks,.

Hi,
Have you invoked any Services before calling the Business Service.
If Yes, then the problem with the Invoked service.In this scenario even if you set the time out period it will not work..
If No, your request payload is high
Regards,
Kiran

Caching in OSB with Business Service

Hi All,
I am done with business service development, but I need to configure caching to fetch the data from cache if TTL (Time to Live) <24 if is more then my request to interact with the database can please help how I can I do it, as I am new to caching concept.
Thank You,
Vinay Kumar

Hi Vinay, Select the Business Service - Message Handling Configuration - in Advanced Settings section, you can configure caching for the business service; select Result caching as Supported, and specify cache token (unique key) and expiration time (TTL). Note- once the TTL exceeds for a particular data, the business service will fetch the result from the target system/database and cache it, and the cycle repeats (no specific configuration to be done for this). Also, before configuring the above, first enable the caching globally in OSB; go to Operations - Global settings - select Enable Result caching, and activate the changes.

Replace E1- Adapter with Business Services

Hello,
We are using E1-adapter to communicate with web Methods ( like calling business function, table IO etc..), now we are planning to replace E1- adapter with Business Services. We are using tools 8.98.11 and Application Release E812.
Question is , is it possbile to create a wraper to call any business functions just like E1-adapter? Any help is greatly appriciated.
Thank you.
Edited by: user3448054 on Oct 12, 2009 1:09 PM

Yes, you can use the JDE Business Service Server to simulate the E1-Adapter associated with webMethods. Oracle provides out of the box Business Services for a majority of the E1 transactions. We have implemented Business Services Server with our webMethods and it is working very well.
-Eric

How to pass parameters to servlet with POST with Business Service OSB

Hi all.
I am newby in OSB. I am trying to send some values through a POST call to a servlet. I know how to call the servlet with Business Service of type "Messaging Service". I send the parameters of type Text.
I have tried several ways, but I don`t find the proper way yo do it. I have tried to insert the param into the body and into the header.
The problem is that I don`t know exactly where to put them, I don`t know if it must be done in the header or in the boy. I neither don`t know if there is a common way to do this.
Please, could you give me a good example of an insert activity to isert a post parameter inside the call?
For example: now I am using this one:
Expression => "accountType=test"
Location => as first child of"
XPATH => empty.
In variable => body.
Where do I have to insert this, in the body or in the outbounds?
I have followed this posts:
https://blogs.oracle.com/jeffdavies/entry/enhanced_rest_support_in_oracl
http://www.yenlo.nl/en/using-osb-with-rest/
Thanks a lot.

Hi,
Please be carefull about passing values such as Strings or number that contains ',' .
using the way described above.
the best way is to pass an ID and then use a select Statement to get the other Values in the target page.
regards
MDK.

How to use security certificate with Business service

Hi,
Information:
I need to use a security certificate for connection from Business service to legacy system.
I have created PKI mapper in WebLogic console, deployed keystore on server and Service Key Provider in OSB.
I can see can connect the certificate in OSB console through the Service Key Provider.
I have done Authentication setting in the Business service "HTTP Transport Configuration" as "Client Certificate".
Problem:
Now whenever I try to invoke BS, the username, password and security key provider is asked at the prompt. Should not the BS collect security certificate automatically? Again,
when i put username and password as that of WebLogic sbconsole; the error pops up with following message :
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
     <env:Header />
     <env:Body>
          <env:Fault>
               <faultcode>env:Server</faultcode>
               <faultstring>Failed to process signature.null</faultstring>
          </env:Fault>
     </env:Body>
</env:Envelope>
If I don't supply username password and certificate at the time of invoking the message pops up as : "The service requires a digital signature, you must specify a service key provider which has a digital signature credential."
I think some mistake is done in the above steps, could anybody please clarify?

The problem was resolved with upgrade to version 10.1.3.4.

Problems with Business Services using Email

Hi,
I'm trying to create a business service to use an email protocol.
In ALSB Console, I go to the "Create Business Service" page and select the "Messaging Service" Service Type. When I get to the Transport Configuration, and select the protocol dropdown, I only see HTTP, HTTPS, JMS and Tuxedo. The documentation says email should be only of the supported protocols here, so whats wrong ?

When creating the business service you specify the service type of your service. If the service type you select is not supported by the email transport it won't show up in the drop-down list. If you selected MIXED type, you can't specify a response, you can't select WSDL based service either or any soap based service.

Issue with Business Services on 11.1.1.8

I am creating DBAdapter services in jdev and then trying to create Business Services in OEPE. I was using the 11.1.1.4 with no issues, but had to upgrade so the server and dev tools were in sync for easy deployment.
Basically when you select the WSDL in the business service it does not see the port binding so you can't complete the creation of the service. It appears the new version does not import things correctly. In the previous version it referenced the WSDL but the new import WSDL looks nothing a like the previous version. I have a fair amount of experience doing this so I am kinda scratching my head as to the deltas and it not recognizing the port binding in the wsdl. Not sure if I need to upgrade jdev 10 11.1.1.6 as I am using 11.1.1.5.
Any help would be appreciated.

I found what the issue is but not sure what the fix is. I selected a sequence when on the last step of the wizard and that is causing issues with the wsdl file. If I remove that things work correctly

URGENT: How to Configure Ruote to Business Service that invokes 2 methods

Hi,
I am using ALSB 2.6.
Currently I am working on a project, in which i have to configure business service and proxy service.
Now the problem which i am facing is the following :-
I'm trying to configure my Proxy service to route to 1 Business Service which in turn invokes 2 methods.
I want to know how can i configure this route to business service that invokes 2 methods.
Right now, to execute/ invoke any of the method i need to invoke each method by changing manually in the rotuing flow.
Can any one tell me how can i configure both the methods for the same business service in a single rotuing flow only.
Presently i am configuring it in this way:
Route to BUSINESSSERVICE invoking METHOD1.
At the place of method 1 theres a drop box from where you select the desired method.
I want to know how to configure both the methods in single rotuing flow so that it invokes the desired method without manually editing it each time.
What is the best solution to this problem? I would very much appreciate any help on this!
Regards,
Samir

Hi,
You can create a pipeline pair, add one (or more stages), and inside of the stage, invoke the a service callout to your business service.
Regards,
Fabio Douek.
Regards,
Fabio Douek

Possible fix for problems with Location Services!!!!

Alright, I had just bought a brand new iPod Touch 5th Generation and was having trouble with any app that used Location services (Siri, Weather, Maps, etc) and it was driving me absolutely crazy. Now, I live in a very VERY rural area in Pennsylvania (basically the middle of nowhere) and my new iTouch kept saying "cannot determine location" no matter what app I was using that utilized Location Services. After 4-5 days straight of searching various websites looking for help (including this one), I came up completely empty handed and had pretty much given up on getting it to work correctly. Somewhere along the line, I found out about Skyhook Wireless and the process for adding my wireless network to their database. I thought to myself "What the heck? It can't hurt to at least try..." even after reading on multiple websites that Apple no longer works with Skyhook. So I gave it a shot,..
I went to the following website: http://skyhookwireless.com/howitworks/submit_ap.php
I entered my address into the first empty text field and then clicked the "MAP IT" button.
It deteremined where I was (pretty darn accurately if I say so myself) so I moved on and entered my Wireless Router's MAC Address in the corresponding field.
Then I entered my email address in the corresponding field, completed the CAPTCHA, and hit "SUBMIT".
I received an email a few moments later from Skyhook letting me know they had successfully received my submission and then I sat back for a few moments, crossing my fingers and hoping for the sake of my sanity that it had worked.
After about an hour or so, I tried to get my local weather using the Weather app that comes pre-installed on iOS. Still, it couldn't find my current location. the Maps app gave me the same result.
I sat here planning my next course of action and came up with...you guessed it....nothing!
I said screw it and went about my business for the day. A few days went by and I was visiting a very good friend of mine and I had my iTouch with me. Now my friend lives even further in the sticks than I do but for some unknown and shocking reason, my location services worked PERFECT at their house (every single app I tried that in one way or another used Location Services, it worked every time) so I asked my friend if it would be alright with them to go grab my wireless router and switch with them for a day or two, just as a last ditch effort for the sake of science and my own sanity. They said it wouldn't be a problem at all. So we traded wireless routers for a day or two.
Upon hooking their router up at my house and using the Weather & Maps apps, it still showed up that I was still at their house and showed the local weather for the town that was nearest to them. I was like "Hey, it's better than nothing!" so I left it go for a day or two.
Upon arriving at my friends house to grab my original router and give them back their original router, I checked my iTouch and, lo & behold, it showed my home as my current location and the correct local weather for the city/town closest to my home address, even though I was at their house. I felt so dumbfounded and almost cried because I had actually gotten it to work. I unhooked my original router, hooked my friend's back up, and it showed up that I was exactly where I was supposed to be - at my friend's house.
I brought my original router back to my house, hooked it up and Cha-CHING! It WORKED!!!!! It showed that I was at my house and showed the correct local weather.
And there you have it, How I was able to solve my location services woes.
I'm not saying it will help out everybody else's location service problems but it is worth a shot, it worked for me.
If this DOES help anyone else out, please reply so as to confirm that it wasn't just me that it works for.

Thank you @sberman for a fast replay, I read the article, but still it doesn't explain why it doesn't show at least that I'm in Europe,while my android phone,having set just wifi as location reference, shows my position at 1km accurately(I don't live in a city,that's why such a big radius) in Google Maps.I also saw the time zone, if I set it automatically,detection through wifi doesn't work, it just keeps refreshing.

Help with Business Services

Hi,
In our company, we are going to give a new functionality to our customers. But we don't know where to start.
Yes, we have been reading the official documentation, but there are not much examples.
Please, could you give me some basic documentation and examples to start with?
And some advanced documentation too, to start with that when we master the BSSVs.
Thanks.

i waiting your help?
is the Question more difficult to answer it??

Configuring IPIB with non-default partition key

Hello
I want to put IB HCA port into non-default partition to create separate network on my IB fabric. On IB switch (Voltaire ISR9096) I created network with non-default partition key 0x7ffe and add HCA port to this partition.
But this IB-VPPA was displayed as unconfigured on Solaris host
ib::3BA0001004181,ffff,ipib    IB-VPPA      connected    configured   ok
ib::3BA0001004182,fffe,ipib    IB-VPPA      connected    unconfigured unknown
ib::3BA0001004182,ffff,ipib    IB-VPPA      connected    configured   okConfiguration of new VPPA with cfgadm was unsuccessful:
# cfgadm -c configure ib::3BA0001004182,fffe,ipib
Configure the device: /devices/ib:fabric::3BA0001004182,fffe,ipib
This operation will suspend activity on the IB device
Continue (yes/no)? yes
cfgadm: Hardware specific failure: configure operation failed ap_id: /devices/ib:fabric::3BA0001004182,fffe,ipibI unconfigured VPPA with default partition key (0xffff) on HCA port 0x3BA0001004182 and issued cfgadm for VPPA with pkey 0xfffe again - the same effect.
I tried this on Solaris 10 8/07 and OpenSolaris b72 with the same result - no success ;)
Is it possible to configure VPPA with non-default pkey on Solaris ?
Is it possible to configure more than 1 IPIB VPPA on single HCA port ?
How to perform these configurations ?
Thanks in advance.
Regards,
Denis

hi
I was able to setup the listener to serve both databases using netmgr, thanks. Apparently I was trying to use the wrong tool for this previously.
Now i'm able to access the EM Database Control and it seems to be working fine though i get the following error message
Logged in As SYS
Error
java.lang.Exception: Number of responses does not match queries
Database Instance: devel.foo.bar
Now, i'd like to be able to use EM for administering two separate databases (running on the same host). Do i need to migrate the database control somehow to grid control? How do i do that?
What about security? I'd like to use SSL and limit connections to selected clients only.
regards,
aspa

MSAD configuration with shared services issue?

Hi
i recently configured MSAD with shared services.but the problem is the hfm users are not in the same group in msad.so i am not getting all hfm users.so i configured 2 more msad groups.
now the problem is while configuring we have to give user name & password of any user in that group.here the password will change for every 45 days.and it is pratically not possible to have others password for the administrator to change for every 45 days in shared services.
is there any other solution for this problem.
HYperion 11.1.1.2
regards
bharat.tv

Can you not set up an one service account that exists in all the groups and doesn't have its password expiring?
Cheers
John
http://john-goodwin.blogspot.com/

Is it possible to configure IDOC with Business service

Similar Messages

Maybe you are looking for