Is it possible to connect and external Harddrive via ethernet?

I have an external Harddrive and the USB port on it has stopped working. It has an Ethernet which I have tried plugging into then onto my mac. It says it is conected but I can't access the Harddrive. Is it possible to do this?

I don't think that is possible the hard drive is designed to be part of a network. You should try plugging it into a router.

Similar Messages

Is it possible to connect an external camera via bluetooth to the Iphone 4 and use it with Facetime, if not.. why?

Is it possible to connect an external camera via bluetooth to the Iphone 4 and use it with Facetime, if not.. why?

Ok, in 2015 is it possible now? I would like to use an iPad and Face to share content between a dressmaker in Asia and a customer in the US, and I would like to attach better camera's than the built-in camera's on the devices.
Any thoughts? Any updates to the original post?
Thanks,
James

Is it possible to connect an external USB 2.0 hard drive to a Thunderbolt Display?

Hello,
Is it possible to connect an external USB 2.0 hard drive to a Thunderbolt Display and back up a MacBook Air to the external hard drive using Time Machine?
I intend to connect my MacBook Air to the Thunderbolt Display using a Thunderbolt cable.
I would also like to connect my printer via USB 2.0 to the Thunderbolt Display. Will this also work?
Effectively using the Thunderbolt Display as a USB hub or docking station.
Regards,
Ben

Ok, thanks.
My 1 cable to ThunderBolt Display objective
MacBook Air -> (via 1 x Thunderbolt cable) -> Thunderbolt Display -> (via 1 x USB cable) -> USB 2.0 external hard drive
I would like to know if this configuration is possible and Time Machine will run correctly.
Your 2 cable suggestion (I think)
MacBook Air -> (via 1 x Thunderbolt cable + 1 x USB cable) -> Thunderbolt Display + USB 2.0 external hard drive
This configuration requires 2 cables to disconnect/reconnect from my MacBook Air.

Is it possible to connect an external blue ray drive via USB with a mac mini to watch HD videos?

Is it possible to connect an external blue ray drive to a mac mini to watch HD videos? Iy yes, what additional software / hardware is necessary?

Saul in PA wrote:
There is some new software that allows playing:
http://www.macworld.com/article/160977/2011/07/blu_ray_movie_playback_comes_to_t he_mac.html
Did you even read the article you linked to?
Here's a quote from it
"The video itself looked fine when it played properly, but it stopped and started constantly, and often displayed with huge, ugly artifacts. And at times, the app would freeze completely and require a force quit.
Just to make sure it wasn’t a problem with one Blu-ray disc, I tried some others. With Hot Tub Time Machine the results were much, much worse. It got a few seconds into the United Artists logo before the movie and completely froze playback. On several attempts. With David Cronenberg’s The Fly, playback was generally better—but the software played the ‘making of’ movie instead of the actual film. I thought there might have been a preference to help with the movie selection, but—wait for it—the Preferences item didn’t do anything when I selected it."
Not very promising is it

Hello, is it possible to connect an external camera to my iphone to take pictures that transfers the pictures via bluetooth to my iphone's photo library ?

Hello, is it possible to connect an external camera to my iphone to take pictures that transfers the pictures via bluetooth to my iphone's photo library ? So my iphone can send the picutres directly to my photo stream. Sorry for my poor english! Not my first language.
Thank you.

You could buy one of these:
http://www.sony.co.uk/hub/lens-style-camera

Why do I get error "The LDAP server is unavailable" while connecting to external domain via sync connection in SharePoint UPSA ?

Hello,
I am trying to connect to external domain via UPS Account having "Replicate Directory changes" permission on external domain while creating sync connection in UPSA.
I have checked below URLS :
http://social.technet.microsoft.com/Forums/en-US/1912bf88-8fec-4b5d-9d1e-a42db8318e33/ldap-server-is-unavailable-sharepoint-2010-user-synchronization?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/en-US/6525d3aa-9197-42a2-aea0-190b84ac8356/the-ldap-server-is-unavailable?forum=sharepointadminprevious
And looks like its network connectivity issue - and hence I have verified that port 389 is open by infra team.
Note : I am able to connect to local AD , does it make sense that port is not open for external domain ?
Can anyone please let me know what can be the issue ?
Your help will be highly appreciated as I am struggling to fix this issue since quite long time but no luck yet.
Thank you in advance.
Kind regards,
Dipti Chhatrapati

Hi Dipti,
If you have Two-Way trust relationship then not sure if you have tried below:
Create a folder on the SharePoint server
Go to Folder properties - Security tab
Try adding user of the external domain on the folder
Please let us know if you are able to add the user or not. If you are able to add then it means that the connection and trust is proper and you should be able to create sync connection in UPA without any issues or else there is some issue with the connectivity
or the trust which is configured.
Please also make sure that you have given permissions to sync account as per below TechNet:
http://technet.microsoft.com/en-us/library/hh296982(v=office.15).aspx
Replicate Directory changes permissions are also required on cn=configuration container, below are the steps:
Grant Replicate Directory Changes permission on the cn=configuration container
Use this procedure to grant Replicate Directory Changes permission on the cn=configuration container to an account.
To grant Replicate Directory Changes permission on the cn=configuration container
On the domain controller, click Start, click Run, type adsiedit.msc, and then click OK.
If the Configuration node is not already present, do the following:
In the navigation pane, click ADSI Edit.
On the Action menu, click Connect to.
In the Connection Point area of the Connection Settings dialog box, click Select
a well know Naming Context, select Configuration from the drop-down list, and then click OK.
Expand the Configuration node, right-click the CN=Configuration... node, and then click Properties.
In the Properties dialog box, click the Security tab.
In the Group or user names section, click Add.
Type the name of the synchronization account, and then click OK.
In the Group or user names section, select the synchronization account.
In the Permissions section, select the Allow check box next to the Replicating
Directory Changes (Replicate Directory Changes on Windows Server 2003) permission, and then click OK.
Kind regards,
Bhavik K Jain
Please ensure that you mark a question as Answered once you receive a satisfactory response.

I have att u verse modem and it wifi was not working. So i got netgear wifi an d i connected my apple tv via ethernet cable to att uverse modem . i did not want slow dowm my wi fi speed. Now airplay is not working .

i have att u verse modem and it wi fi was not working. So i got net gear wi fi and connected to att modem . i connected my apple TV via Ethernet cable to att uverse modem . i did not want slow down my wi fi speed. My Apple phone is on Netgear wifi .Now airplay is not working .

Make sure that the Att Modem goes to the netgear router via ethernet cable. Then connect your Apple Tv with a ethernet cable to the back of the net gear router. Airplay wants it to both be connected to the same device, usually.

Morning, is it possible to connect your apple Ipad via bluetooth with a blackberry phone?

Morning, is it possible to connect your apple Ipad via bluetooth with a blackberry phone?
Lastly can you download from a wwindows computer to your Apple Ipad?

No.
You can use iTunes on a PC to sync content to an iPad.

Connecting Two Airport Express Via Ethernet

I have a unique situation in which I would like to connect two airport express via ethernet. Here is the situation: I can connect the first AX directly to the internet and set up a WDS for the second AX. Unfortunately, the second AX signal does not reach where I need it to go. I can run an ethernet cable between the two. Is this setting valid for a WDS? Or does the WDS have to be wireless? If I can set up the WDS using an ethernet, will the relay AX broadcast the internet wirelessly then?
Are there any specific settings I should know about?
Any help would be great.
Thanks in advance,
Debbie

I currently have an old snow basestation at this location. Can I plug an ethernet cable into it and connect it to the AX?
Yes that will work.
My understanding was that the older basestation could not do this?
I think you have it confused with extending a network wirelessly. That is not possible with the snow AirPort base station (ABS).

Issue with 2wire dsl router when connecting power pc g4 via ethernet

Issue with 2wire dsl router when connecting power pc g4 via ethernet. The 2wire will keep resetting. When I connect my macbook pro via ethernet to the 2wire all is ok, but as soon as i connect the power pc. . . .reset. I have emailed 2wire support. They recommended using a different patch cable. Tried that.. .. anyone else having this issue???? Any help would be appreciated. . .

Search the discussions for issues with 2wire dsl routers. This has come up before in a discussion I've been involved with, but probably not to do with the MDD. I do remember it being a design issue with the router, something that was done to it before dispatch.
Let us know if you can't find it and we'll have a look.
If you afford it, bin the 2wire and go buy something decent like a Netgear.

Macbook Pro suddenly will not connect to the internet via ethernet cable.

I know this is a long shot... but I figured I would give it a try.
My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue. Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.

As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

Not without a player..
The AE is a dumb file server.. the hard disk you plug in is an even dumber hard disk.
There are no smarts in this setup.. not even DLNA. So the TV would have to be an extremely smart one to read raw files on a network drive.. none do that I know of.
A solution is WD live TV.. it can read files from just about any file source on network and play them to the TV.
Nothing apple makes will do that.. ATV is a streamer not a media player. Everything in the Apple world is tied up with itunes. So you must have a computer running itunes to use it.
You can download a more generic player for ipad, and put that as part of the network.. but you still need ATV to display the video.

Connected to the internet via ethernet, BUT...

I turned off my computer, modem, everything and uplugged it all because of a severe lightning storm Saturday. Since I turned it back on the next day I haven't been able to access the web or my mail. However, the problem must be with my G4, because I have an iBook on Airport and I'm able to connect to the web and email with it. So the cable modem and Airport are evidently working properly. My G4 network settings all appear normal. I've got a green light saying I am connected to the internet via ethernet, but I'm really not. My email won't go online and no browser works, although I don't get a "can't connect" message on the browser screen, it just stays white. I had this problem before but I can't remember what I did to correct it. I just remember unplugging the modem and Airport over and over, in different order, and resetting preferences. But I don't remember what I did, if anything, to actually make it work again. Does anyone have an idea on what I can try to REALLY connect?
Thanks in advance for your help.
Frustrated in Florida,
EG

Tough to troubleshoot lightning in person, moreso at a distance!
Things to try...
Type 17.112.152.32 into your browser... thinking it may be off looking for a DNS server that doesn't exist.
Launch Network Utility and see if you can Ping like that addy, or your other computer.
Results may help us get further.

PowerMac G4 will not connect to the internet via ethernet

I am normally a very mac savy person, but I cannot get this to work...
I have an Airport Express connected to speakers, a USB printer and an ethernet hub, which is connected to a cable modem and also a PowerMac G4 via ethernet. There is also a wireless iMac thrown into the mix. All hardware has up-to-date software.
The wireless iMac gets online, prints and plays music wirelessly.
The wired PowerMac G4 will not connect to the internet via ethernet, it is killing me.
I have gone through all the settings and cannot figure this one out. I really appreciate all advice.
Thanks,
G4 Mac OS X (10.4.8)

Hi pradagirl,
Welcome to Apple Discussions!
Leaving the other peripherals out, tell us the connection sequence from the G4 outbound.
Also, you might gain more insight at the Networking Forum
Regards,
John
G5Dual 2Ghz  23" ACD  iSight Mac OS X (10.4.8)  20" Intel iMac 

Question re AEBS Connected to Airport Express via Ethernet

If I have an AEBS that is being used to extend the range of my wireless network, if I connect an Airport Express via Ethernet to this AEBS for purposes of itunes airtunes will this work and will the wireless network remain wireless-n?

Yes, it will.
You also have the option of (a) completely turning off the radio on the Airport Express or (b) leaving it on, and using it to create a b/g point of access to your LAN thus allowing you to run the AEBSn in n-only mode for your n-capable wireless clients.

Is it possible to connect and external Harddrive via ethernet?

Similar Messages

Maybe you are looking for