Is it possible to connect home cinema new iMac?

As in title
Is it possible to connect home cinema harman kardon bds to new iMac through thunderbolt-hdmi or other way?
Thanks,
A.

are you trying to hame your imac play out of your stereo
or are you trying to input audio from your stereo into your imac?

Similar Messages

  • I have 2 external drives connected to my new iMac. I can see but no one else can, the other can be seen but not written to.

    I have 2 problems, i have 2 external drives connected to my new iMac.
    Both are formatted to FAT 32, one I can see but no one else can and I can write to that drive,. The other can be seen by all but not written to by me or anyone else (This drive was used on PC but is FAT32 (have been back to the PC & told it to read write).
    Permissions are correct on both that I can see. Thats the extent of my knowlege.Please help

    Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
    OS X 10.9 Mavericks
    OS X 10.8 Mountain Lion
    OS X 10.7 Lion
    OS X 10.6 Snow Leopard
    OS X 10.5 Leopard
    OS X 10.4 Tiger
    OS X 10.3 and earlier
    OS 9, OS 8 & System 7
    OS X Technologies
    OS X Server
    iPad
    iPhone
    iPod
    Other

  • Connecting Macbook to new iMac

    I recently bought the 24 inch iMac because my Macbook (purchased April 2006) is slow, unresponsive and has a broken optical drive. I have all of my recent photographs on my Macbook and would like to transfer them to my new iMac using a brand new Firewire 800 9-6 pin cable. My macbook is in working condition and this should work.. however my Macbook in FW mode isn't showing up on my iMac! Help!

    That should be working. Try restarting the iMac with the MacBook connected in target mode. Also, if you run Disk Utility, does the MacBook's drive appear in the sidebar?
    If you have never used that new cable for anything else, it is possible the cable is bad. It is also possible one of the FireWire ports is faulty. Do you have any FireWire 400 device? If so, use that cable to connect it to the iMac's FireWire 800 port, as a test. That will test the iMac's port and the cable. Also try connecting it to the MacBook with a normal cable, to make sure that port is working.
    You can also connect the two Macs using +File Sharing+ over the network. Using an Ethernet cable to directly connect the two Macs will be faster than using wireless (as long as you use a Cat-5e or better cable). Just turn on +File Sharing+ in System Preferences Sharing pane on the MacBook. On the iMac, the MacBook should appear in the sidebar of any Finder window. Select it and click on the +Connect As+ button over to the right. Provide a username and password for an user account (on the MacBook).

  • HT1151 I have my iTunes library on an external hard drive that was connected to a PC, now I want to connect to my new iMac and load the iTunes library onto that computer, can I do that?

    I have my iTunes library on an external hard drive that was connected to a PC, now I would like to connect that hard drive my new iMac and load the iTunes library onto that computer, can I do that?  Looking for a solution that keeps me from re-ripping my CD collection.

    Here are the official Apple Support instructions:
    http://support.apple.com/kb/HT4527
    Ciao.

  • Is it possible to hang/mount the new IMAC on the wall???

    Just curious...just go one for my fiancee' and was wondering if it was possible to mount it to the wall to save a little space??? thanks Mike

    No. Unlike the first two iMac G5 versions, the new iMac Intel CD---like the G5 iSight version it follows--- cannot have its stand removed from the back and is not VESA compliant.
    Too bad, if you ask me, because the iMac would have been perfect if you could wall-mount it...

  • Connecting on a new iMac G5

    Trying to help a friend get his new iMac G5 on to the net, transferred his old setting from his old mac running 10.2.8 which used a usb cable, connected to a external modem/single router which then goes direct to the phone line. But with the new mac's there is no setting for internal modem and hence we cannot set up his broadband connection to work using the usb port.
    Any help greatly welcome

    I'm not clear about all the details, but I am assuming you are talking about a DSL modem with only a single USB port connection for the computer, not a regular dial-up modem, which is what an internal modem network port setting would be for on Macs that support them.
    If this is the case, I'm afraid your friend will need a DSL modem with an ethernet port or wireless link because Tiger doesn't seem to support high speed USB modem connections. (Apple sells a USB dial-up modem for the new iMacs -- see http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=MA0 34Z/A -- but I don't think from your "broadband" comment that this is what you want.)

  • AirPort not connecting consistently on new iMac aluminum

    Just got a new iMac. Awesome toy but with a couple of bugs. I am having the freezing (beachball) issue but the most anoying one is the AirPort disconnect.
    I have a wep connection and when I boot sometimes it connects automatically, sometimes it doesn't. Other times it just drops the connection. Signal strength is always good at 100%. (router 10 feet away)
    To re-enable, i have to turn off air port, wait about 10 seconds and turn it back on. 9 times out of 10 it works. If not I have to keep doing this until it connects. If I just try to connect to the network ssid, it never works.
    Anyone else have this issue or know of a fix.

    try:
    from the Airport (little radar in menu bar) pull-down menu,
    turn-on "Interference Robustness"
    the next step would be changing the channel settings in the router from 11 to 6
    +any 2.4Ghz cordless phone around?+
    Thanks,
    den
    .

  • Connecting iPad to new iMac

    I purchased a new IMac 27" a few weeks ago, I transferred everything to the new computer with no issues, but now my phones and iPad will not sync with the new computer, is there a way to force sync it?
    Thank you

    Provide more Info
    Will not sync Can range from not being detected by the computer at all
    To it playing an audio click Stating "i hate you! Wish i had never been build IN china"

  • Connecting guitar to new imac

    Just recieved the new 27" imac and i'm trying to connect my electric guitar. But there is no 3.5 audio input jack socket anymore just the 3.5 headphone socket? does this mean i have to buy a audio interface or a 6.5mm female to USB cable?

    does this mean i have to buy a audio interface
    Yup.
    or a 6.5mm female to USB cable?
    How's that supposed to work? Not without an audio interface somehow "integrated"...

  • Connection snag for new iMac G5 to AV receiver

    The user guide says that I can use an optical audio cable w/ mini-plug connector for a iMac G5-based home theater system. I bought a Sony HT-DDW670 5.1 system with an AV Receiver STR-K670P that has a digital optical in
    (SA-CD/CD in) that I connected to the optical out. When preferencing the sound setting for the selected device, Mac says that the Digital Out "has no output controls".
    The only note in the Sony guide concerning the optical hookup reads: "The sound is not output when you play a SA CD on the SA CD player connected to the SA-CD/CD OPTICAL IN jack on this receiver. Connect to the analog input
    jacks (SA-CD/CD IN jacks)." -compatible w/ 32, 44.1, 48, & 96 kHz.
    Does anyone have any ideas? The sony online support talked about a stereo mini pin adapter?
    iMac G5 PowerMac12,1   Mac OS X (10.4.2)  

    Hi there,
    Not sure quite waht your problem is!? I have my imac (iShight) G5 connected to my Sherwood amp through a monster audio optical cable with a mini concerter into the mac. As you say, the Mac ships the digital signal straight to the amp.... so you have no system volume controle. However applications can still have an influance on volume.
    I have my amp set to a hight volume and my apps to a mid level so I get a nice out put and have room to crank it up.
    My amp has a coaxcal and optical input, which is accessed through DVD input, as it assumes that DVD will have digital audio I also have to switch between coaxical and optical on the amp... depending on what cable I'm using.
    My DVD used to be coaxixal, may power mac and iMac are optical! The sound is fantastic when you get it to work!
    Did that cover your issue in any way? Sorry for rambeling!
    Stu.

  • Connect Thunderbolt on new iMac to Firewire 400 device

    I would like to connect a tape-based camcorder with a (4-pin) Firewire 400 output to a Thunderbolt port on my late 2012 iMac (which has no Firewire ports).  Apple sells a Apple Thunderbolt to FireWire Adapter (i.e., Firewire 800).  I'm thinking I could plug that into a 9 PIN/ 4PIN BILINGUAL FireWire 800 - FireWire 400 Cable  from monoprice.com.  Should that work, and if so, is it the only/best solution?
    Cary

    Welcome to the Apple Support Communities
    That should work without any problem.
    If your camcorder has got other connections like USB, I recommend you to use USB instead, so you will save money and there are more possibilities that it works. Also, if it has got a SD card, you can insert it directly onto the iMac without connecting your camcorder

  • I want to use the ethernet connection from my new iMac to my Time Capsule.  It seems only the Wifi is seen by either device.  Ive connected the Time Capsule to the iMac.  How can I get the iMac to use the wired connection

    I want to connect my iMac to my Time Capsule using Ethernet.  I have them connected via an Ethernet cable, but only WiFi seems to be working.  How can I specify the Ethernet connection instead of WiFi?  Thanks
    Welked

    Go to preferences, network and see if ethernet is indicated. Be sure it shows a green dot.  Also be sure it is at the top of the list (above WiFi).  If not click on the the wheel at the bottom and set service order.

  • Possible to stream home movies on iMac to iPad?

    So I can stream videos–that I've bought and/or rented through iTunes on my iMac–to my iPad. But I see no way to stream home videos sitting in my iMac's iTune's movie folder to my iPad. Am I missing something?

    Disregard, this was posted to wrong forum.

  • It is possible to connect the new Mac Pro at the Eizo  Color Edge CG 243 W

    Hello,
    it is possible to connect at the new Ma Pro an Screen Eizo Color Edge CG 243W, or is this model to old for the new computer?

    The display has DisplayPort, so all you neded is a Mini Displayport to DisplayPort cable to connect it to a Thunderbolt port on the Mac Pro.
    <http://www.startech.com/Cables/Audio-Video/DisplayPort/6-ft-Mini-DisplayPort-to- DisplayPort-Adapter-Cable-Male-to-Male~MDP2DPMM6>
    It also has DVI, so you could connect it to the Mac Pro's HDMI port with a HDMI to DVI cable.

  • Connecting New iMac to Server 4.0

    Have a new MacMini Server updated to Yosemite and Server 4.0.  I believe I have setup the server to provide services via Open Directory, Mail, Messages, Calendars, created Network User accounts and so on. Seems relatively easy, actually.
    But, what is the best way to connect a brand new iMac with Yosemite to the server?  A long time ago, I watched some Apple videos that showed an option in the initial OS startup to connect and configure automatically but that seems to be gone. Is there a support document or checklist that shows the best way to connect, step-by-step to the server and have things work?
    I'm afraid my initial attempts have been very frustrating -- the client machine says it's connected to the server, but cannot load any user accounts. Mail/Messages, etc., continually ask for passwords and will not work.  Obviously I have missed something!!
    Sorry ... LONG time Windows guy helping out his small company (seven clients) to transition to Apple/Mac!!
    Thanks in advance.
    Ken

    After a couple of calls to Apple Enterprise support, this was pretty much resolved.  Issue revolved around my initial choice of hostnames.
    Ken

Maybe you are looking for