Is it possible to connect HP DESKJET 1510 All-in-One series Wireless printer without USB cable?

my mom recently bought me the HP DESKJET 1510 All-in-One series so i have an at home printer for school work. but when we bought it we did not know there was a certain USB that had to connect to the printer. so we bought the wrong one. now i have a project due and i cannot print. we have a small USB that fits it but its hard to connect it to the computer and printer because its so small. so if we can have it sent to the printer without the USB that would be perfect!

Hi,
No, in many cases printers won't come with USB cables. You need a cable which is similar to the following one:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • My brand new HP Deskjet 1510 all-in-one series Cant print

    This new HP 1510 All in one series that I just bought is not consistent in printing and most of the times it picks the paper and makes a bipping sound and then stops. It will then give a printing error report and spit out the paper with no print. This is driving me crazy. I have uninstalled and installed a couple of times but the problem persists. At times it prints and at times it doesn't. you can barely tell when it is going to print and most of the times it doesnt. I really need suggestions please

    Hello there @Drawingston , welcome to the forums
    I read your post about your Deskjet 1510 not printing consistently from your Windows 8.1 system, and when it prints, the pages are blank. I will surely try to help you!
    I would suggest that you try a few things, they are:
    Run the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. Please send me the results in a screen shot or write them in a response.
    Try a different USB cable that runs directly from the back of the printer, to the PC.
    Click this guide and try cleaning the paper rollers: The Printer Does Not Pick Up or Feed Paper
    Reset the printer and make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors.
    Try printing again from more than one program.
    Let me know all of the results
    Good luck!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How do I scan on my HP deskjet 1510 all in one series? Theres' no button on the printer?

    there's no scan button on my hp deskjet 1510 all in one series printer? how do I scan?

    Hello,
    If you go to the following location and identify what PC operating system you are using, it provides instructions on how to scan to your computer:
    http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=26675&tmp_task=useCategory&cc=us&dlc...
    I work for HP, However, I am speaking for myself and not for HP

  • HP Deskjet 1510 All-in-one series

    Every time I try to connect to printer to my laptop the usb doesn't connect them. Trying to figure out what to do at this point, it's a brand new printer.

    Ok, can you uninstall the 1510 software and download the full feature driver software from HP. (link)Do not connect the 1510 until asked.

  • Scanner not working hp deskjet 1510 all in one

    Hi.. i have hp deskjet 1510 all in one printer, at first all are working so well. but after 3 days scanner is not working. Everytime i try to scan "hp series not found" will appear. I also tried the print and scan doctor but it shows Hp twain scan error. I dont know whats the problem. i tried to uninstall and install it again using the installation cd and so with the the software and driver provided by hp but still not working. Pls help me to fix this one. Thank you...

    Hi jkshipra22,
    Thank you for your reply! For further assistance I will need to know:
    If the printer is able to make copies by itself. Copy Text or Mixed Documents.
    If the power cable plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    In the meantime, please try our HP Print and Scan Doctor, and let me know what happens.
    Hope to hear from you, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • My HP Deskjet 1510 All-in-One Prints Test Page But not emails or Web Pages, ect

    My Deskjet 1510 All-in-One Printer is Hooked up. All tests show a Green Arrow, It is Turned on, and Online. It will Print a TEST PAGE, but nothing else. I have Run the HP DR Support program several times to no avail. No Error Codes or Signs appear. It simply will NOT WORK other than printing a TESTPAGE or Scanning Copies on the Printer/Copy Machine. Please Help. I have been trying to get it to work for a week. It IS a New Printer. I have tried it on 2 seperate Computers which work well with other Brands of Printers. One Runs Windows 7 Home Premium 64 Bit, Acer Aspire Desktop. The Other a Dell T5400 running Windows 7 Professional 64 Bit . Printer is set as DEFAULT. ALL SOFTWARE is UPDATED AND INSTALLED. It says it is installed properly, and that it is Hooked up Properly, Yet it will NOT work properly. Thank you.

    Welcome to the HP Community , I read through your post about the printing issues you have been having, and I hope to help you! Seeing how the printer will make copies and test print tells us that the printer itself is fine and there is no hardware issues. However, seeing how printing from two different computers will not work, flags a software problem on the computers. Please try out the steps below and get back to me with the results and we will go from there. If you did not install the Full Driver, run the HP Printer Install Wizard for Windows to search and install the complete driver and software. This will need to run on both computers individually. Manually restart the print spoolers on the computers:1. Click Start
    2. Type "Services" in the search field.
    3. Open SERVICES
    4. At the bottom, click "Extended View"
    5. Search for Print Spooler
    6. Right-click it and choose Properties
    7. Select as Automatic in the drop down box, close the Window
    8. Right click on Print Spooler and choose "Stop", wait until it stops and then right click again and "Start".
    9. Close out of Services and try printing from Notepad.10. Try printing from a web browser now, if there is a problem with the print, try a different web browser.  Show thanks for my reply to help you today by hitting the "thumbs up" icon below!I hope to hear from you, good luck! 

  • Upgrade Deskjet 3050 all in one J610 to print Apple AirPrint?

    Anyone knows if you can upgrade Deskjet 3050 all-in-one j610 to print AirPrint from my Ipad?
    Or in a way to work around printing to this J-model from my Ipad?

    The Deskjet 3050 does not support AirPrint.  AirPrint requires firmware in the printer that understands the AirPrint format.
    You can use the HP ePrint application,
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02775166#N58
    https://itunes.apple.com/us/app/hp-eprint/id299531647?mt=8
    or
    Try the HP All-in-One Printer Remote application,
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03561640
    https://itunes.apple.com/us/app/hp-all-in-one-printer-remote/id469284907?mt=8
    I am an HP employee.

  • I NEED A FREE DOWNLOAD FOR MY PRINTER/DESKJET F300 ALL IN-ONE-SERIES/HP

    I NEED A FREE DOWNLOAD FOR MY HP DESKJET F300 ALL-IN- ONE SERIES,OR ANY 325 SERIES.

    Hi,
    You will definitely get FREE from the following link:
       http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?cc=mx&taskId=135&prodSeriesId=11293...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do i connect HP Deskjet 3050 All-in-One J610 Series to my Laptop

    I need help to connect my HP Deskjet 3050 All-in-One J610 Series to my Samsung Laptop, can any1 help pls

    Hi,
    What is the operating system on your Samsung ? How do you want to connect it ? The following link is for Windows drivers:
        http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4066452
    For Android, please use the following app:
       https://play.google.com/store/apps/details?id=com.hp.android.print&hl=en
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Deskjet F4200 All-in-One-series printer

    My printer shows an E in the start copy window and it says by black ink is low, which I just replaced brand new last week and it was printing great until last night. What do I do?

    Welcome to the forums Natalee!
    I saw your post about the issue you are having with your F4200 model showing you an E and giving you a low ink alert for the black cartridge. If you have already tried a new cartridge, please let me know which model of F4200 you have and I will look for troubleshooting guides for you to try.
     HP Deskjet F4210 All-in-One Printer
     HP Deskjet F4235 All-in-One Printer
     HP Deskjet F4240 All-in-One Printer
     HP Deskjet F4280 All-in-One Printer
    Thank you
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Download deskjet f380 all in one driver and printer

    windows 7  64   installed on my computer sucessfully.
    i was downloading hp deskjet f380 all in one  driver and software off HP website and
    lost electricity to computer before completed.   Then computer tried to recover
    cleanupprogress rollback and was removing unnecessary components and the computer
    appeared to  be working but stuck at 45% progress  for 2 hrs.    obviously something is wrong.
    any ideas what to do?

    Hello there Beezntrees,
    We have a great many bundles that offer our customers some savings when in need of purchasing multiple devices. With so many options to choose from, our sales associates should be able to direct you in the right direction to get you set up with devices that meet your needs. It is discouraging to hear that it took a few visits to the store with a couple exchanges to get you to where you should have been left after one.
    I am glad to hear that you were able to speak with a manager at the store, and that she offered you a resolution to this experience. I have some further information for you, which I would like to provide to you in a private message. You can check your private messages after you have signed into the forum by clicking the envelope icon in the top right corner of the page.
    Sincerely, 
    Tasha|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Connecting hp deskjet 2540 all in one

    How do I connect my go desckjet 2540 all in one to my iPad and iphone?

    Hi @Krissy13 
    Welcome to the HP Forums. I would be happy to help you get your Deskjet 2540 onto your network. I use this method for iPads, iPhones and other devices that do not have software.
    Restore the network defaults on the printer by pushing the wireless button, going to settings, and then restore defaults. The wireless button should then start flashing, this means it is now in autowireless mode.
    Connect your iPad to the network that the printer is broadcasting. It is usually HP-setup-2540 and then part of the MAC address (printers hardware address). The wireless light will still be flashing on the printer at this point, this is normal since this is not an actual adhoc connection.
    Open an internet browser and load up the Embedded Web Server (EWS) by entering the IP address into the address bar. The default IP for autowireless is 192.168.223.1.
    Go to the network tab along the top of the EWS.
    Click on Wireless Setup Wizard along the left hand side to begin configuring the printer.
    Once the printer is on the network, you can put your computer back on your own network and print again.
    If for any reason this does not work, please let me know what operating system , and version you have? Mac or Windows?
    If this does resolve the issue, please let me know by marking this post as "Accept as Solution". Thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Connecting HP Deskjet F4100 All-in-one to WRT400N

    I need to connect this printer to my network which has one desktop plus two laptops..Question is how do I do it? It is not wireless-ready..do i need to buy adapters, etc? That seems a bit much... The adapters are more then the cost of the printer itself  was..or am i missing a simple way of doing this?

    Well there are 2 options how you can share your printer on the Network.
    1: Enabling File and Printer Sharing on all your computer, and this will let you print from all the computers connected to your Router, But whenever you want to Print anything from other computer your desktop computer should be turned on always. 
    2: Buy WPSM54G, Its a Wireless Print Server. 
    To Enable File and Printer Sharing click Here. 

  • HP Deskjet 3050 All in One Mac not working w USB or Wireless

    I have tried to setup my nen to me printer both via USB and Wireless connection. The computer did locte the priinters wifi signal but that was as far as i could get with that. The USB connection was a little better but when I added the printer there was not an option for the software matching the product number so i used the generic. Once setup I have tried to print and the printer icon comes up momentarilly then  disapears. I am lost. Help please!!!

    Hello there! Welcome to the forums @colemanthompson ,
    I understand you are running into troubles when connecting your Deskjet 3050 to your Mac. I will certainly do my best to help! Please first respond to me with which Mac OS X you are running.
    Thank you
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Deskjet 3050 All-In-One J610 only prints blank pages

    Hi,
    All of a sudden, my printer stopped printing. The ink levels in the cartridges look fine in the HP utlity, and I did the self-cleaning steps, but when I print something, only a blank page comes out. There is some ink around the edge of the paper, though, but nothing on the actual page.
    Any idea how I can fix this?
    Thanks.

    Hello jennydel,
    Welcome to the HP Support Forums!
    Cleaning the printheads is a great way to resolve print quality issues on the Deskjet 3050. On the cleaning page, does anything print on it?
    In this HP document: Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems you will see the full HP suggested troubleshooting steps. I hope they are able to help get the printer working again.
    Thanks for posting.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Maybe you are looking for

  • GR/IR clearing account is being assigned to a acct assignment object

    Hi there! My key-user asked me a question which I really don't know how to answer.  He asked me about the reason why in an accounting document automatically generated by MIRO the item which contains the GR/IR clearing acct is always assigned to an ac

  • I'm not able to connect to internet through my wifi router, which is Sitecom 150N working fine with pc

    I'm not able with ipod touch to connect to internet through my wifi router, which is Sitecom 150N working fine with pc

  • Printing JTable

    Hi I ahve created a print method in order to print various reports. However, This is set up to print results of queries. One of the reports that I wish to report is a lot more complicated than just a query...and realistically I need to print a JTable

  • Have you got the same problem?

    Hello, I've been editing some code and wanted to use the 'insert destination path' tool in the editor. On pressing the icon Flash CS3 just...... QUIT. No saved work, no message, just no window. I'm shocked, since fortunately I wasn't working over som

  • BAPI to attach document in MIR4

    Hi Gurus, My requirement is to attach file to the invoice in MIR4 t-code. We can manually do this by going to system-> services for objects. But we want to automate this process i.e. On desktop we will be having an excel sheet in which we will have i