Is it possible to connect labview with opc server without using NI dsc Module ?

Hellow sir,
I want to get data over labview using OPC server and i am not using any dsc module vi (Alams, print, GUI, security).I am using share variable to get data from OPC server to labview. Now i want to deploy that application to third party computer. (where there is no NI software is installed)
i am using labview 8.6 and 2009.
Many ? like....
1) what is the procedure to install that application in third party computer.
2) Do i need to use my dsc run time licence..?
waiting for your valuable feed back.
Thank you.
CLAD
Labiew programmer

Hi, When you connect to NI OPC Server by creating New I/O Server > OPC Client. You will see all registered OPC Servers running on local machine or remote machine. I used KepServerEx from Kepware and LSIS OPC Server from LG with no problems. Just make sure that the OPC server is running.
Hope it helps
Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
Assistant Lecturer
Mechatronics Department
Faculty of Engineering
Misr University for Science & Technology
Attachments:
LG.png ‏57 KB

Similar Messages

TCP Connection Issues with OPC Server and GE Versamax

Hi there,
I have an installation of Lookout 6.0 coupled with the OPC Inductrial Automation servers. In my application, we are running two instances of the GE Versamaz Ethernet driver to communicate with two remote (over the internet) GE Fanuc Versamax PLCS.
Every few days, the two PLCs lose connectivity. It does not appear to be a LAN connectivity issue as I can still log into the PLCs using the GE software. To fix the issue, the Lookout software must be restarted.
Has this been seen by anybody else? This poses a significant problem as lookout is used to monitor the PLCS at sewage stations - each time the connections are lost we have to deploy technicians to the sites to ensure all is working.
-andrew

Hello Andrew,
When the connection is terminated are you getting any errors or alarms? If so what are they? Also you can try to replace the object that is connected to the PLC and make sure it has the correct settings. It may also be due intermittent networking issues, losing connection and not able to connect with the object again unless Lookout is restarted again. I have not heard about any such networking issues. The attached document can be used for reference.
Regards,
RMM
http://digital.ni.com/public.nsf/websearch/5ECD2AFA039B45C186256B1300621722?OpenDocument

Is it possible to insert row with timestamp field without to TO_TIMESTAMP

hello
is it possible to insert row with timestamp column without using to_timestamp unction
somthing like insert into app.master values (3,333, 'inser tmstmp', 6.7, '2010-11-10 15:14', 'f','9','2010-12-22')

784633 wrote:
hello
is it possible to insert row with timestamp column without using to_timestamp unction
somthing like insert into app.master values (3,333, 'inser tmstmp', 6.7, '2010-11-10 15:14', 'f','9','2010-12-22')If you don't like the answers in your previous thread (Re: how can i set timestamp format don't expect to get different answers just because you start a new thread.

I have found a person who has a driver software to connect Labview with PCI card. But he says that i need to download a freeware software to configure the PCI card. But you have mentioned that freeware is for GPIB boards. Is it correct ??

I have found a person who has a driver software to connect Labview with a general PCI card. But he says that i need to download a freeware software from NI website to configure the PCI card. But you have mentioned that freeware is for GPIB boards. Is it correct ?? Is there any other way out ??

I would ask the person who told you about the freeware software to help you find exactly where it is. I am not aware of any freeware software for configuring motion PCI cards but maybe the person you know might be able to help you locate it.

Connect Labview with Adobe Flash

Hi,
How can i connect Labview with Flash? I know one way: write a text file with labview and open with Flash but this method have some errors sometimes. I thinking in something like an open connection like sockets, i have labview 8,5. i saw that in the labviewm 8,6 that have a webservices, it's something like that but with labviewm 8,5.

will post no 4 of this thread will help you?

Trouble connecting to an OPC server

Hi guys,
The problem is connecting to a mass spectrometer, for which I have a dedicated LAN cable connection and an IP address. I can ping the device, and connecting to the OPC server works with the Softing OPC client, by manually entering the IP address of the server. However it does not show up in the remote machines list when I try to connect to it with via new I/O server. Is there a way to connect directly to an OPC server having only it's IP address?

Our lab was shut down for the holidays period, so I couldn't try anything for a while. Back on it now though.
Thanks for your suggestions! However, I still can't reach the server. Some more details in this post.
The server explorer doesn't see the device either. I think both the
server explorer and LabVIEW actually browse the network looking for
machines running some kind of Samba (SMB) server? That's at least
suggested by the characteristic '\\' added to the machine name I put in
there. I don't think the Mass Spectrometer is running an SMB server. It
does run http and OPC servers, and I believe that's it. So it's not 'visible' on
the Windows network. Is that a problem?
When I enter the IP address of the machine at the new IO server window,
it automatically adds the '\\' in front and gives the 'No such
interface supported' error described in the previous post. When I put
in the IP address of a non-existing machine it gives a different error
('The RPC server is unavailable') after a few seconds. So it does seem
to know there is a machine there, just it can't interface with it.
Reconfiguring the client side DCOM settings according to recipe above didnt seem to make a difference.
Anyone?

Communicate With OPC Server

I am Using the PLC of Unitronics they have there OPC server called uniOPC sever i need to communication the OPC server using DSC what are the steps to communication.I am new with Labview.

How Do I Connect to an OPC Server Using DataSocket?

Help Needed in establishing connection between Kepware OPC server and UDS 4

Hi All,
I am in the process of establishing connection between Kepware OPC server and UDS 4.0,
Can anyone guide me through the process of configuring UDS 4.0 to establish conection with the Kepware.
Any standard documentation on UDS 4.0 will be of great help.
Thanks in advance,
Shyam

HI Rajesh,
I am creating OPC DA instance and when i try to browse for the OPC servers available in the machine, the list is blank. i am not able to view any OPC servers.
Actuallt the Kepware OPC server and UDS are installed in the same machine.
Can you plz through some ligh on this
Regards,
SHyam

My old mac screen broke down and I would like to transfer my photos and documents to my new mac. Is it possible to transfer it with the cable without fixing my screen?

My old mac screen broke down and I would like to transfer my photos and documents to my new mac. Is it possible to transfer it with the cable without fixing my old mac screen? Please help!

Sure! If the two Macs have Thunderbolt ports, attach a Thunderbolt cable between them. If they have FireWire, or if one has FireWire and one Thunderbolt, connect a FireWire cable (with a TB adaptor if necessary). Reboot the old Mac holding down the T key. Make sure it's connected to power. You'll now see its system drive appear on the desktop of the other Mac and you can use Migration Assistant to automatically transfer files, or drag them over manually.
Matt

Connection pooling with SQL Server 2008 and Tomcat 6.0

Hello Everybody,
I'm creating a web application using struts 2.0 , tomcat 6.0 and sql server 2008.
Everything works fine but i'm unable to create connection pooling with sql server 2008.Please help me to solve this issue.
Code for this is as foolows:
in my META-INF/context.xml
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/spas" docBase="spas"
debug="5" reloadable="true" crossContext="true">
<Resource
name="jdbc/spas_new"
auth="Container"
type="javax.sql.DataSource"
maxActive="20"
maxIdle="10"
maxWait="-1"
user="spas_user"
password="spas123"
driverClassName="com.microsoft.sqlserver.jdbc.SQLServerDriver"
url="jdbc:sqlserver://HGL-0053\dbo:1433;databaseName=spas_new;responseBuffering=adaptive;"/>
</Context>
in my web.xml
<resource-ref>
<description>SQL Server Datasource</description>
<res-ref-name>jdbc/spas_new</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
and in my ConnectionThread.java file i've used:
Context ctx = new InitialContext();
if(ctx == null )
throw new Exception("Sorry! No Context Exception");
DataSource ds = (DataSource)ctx.lookup("java:/comp/env/jdbc/spas_new");
System.out.println("ds:"+ds);
conn=ds.getConnection();
Following is the exception:
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Login failed for user ''.)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1225)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880)
at login.V_SPAS_ConnectionThread.getConnection(V_SPAS_ConnectionThread.java:87)
at org.apache.jsp.login.v_005fspas_005flogin_005fpage_jsp._jspService(v_005fspas_005flogin_005fpage_jsp.java:95)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:337)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:630)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:436)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:374)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:302)
at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1085)
at org.apache.struts.tiles.TilesRequestProcessor.doForward(TilesRequestProcessor.java:263)
at org.apache.struts.action.RequestProcessor.internalModuleRelativeForward(RequestProcessor.java:1023)
at org.apache.struts.tiles.TilesRequestProcessor.internalModuleRelativeForward(TilesRequestProcessor.java:345)
at org.apache.struts.action.RequestProcessor.processForward(RequestProcessor.java:572)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:221)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:630)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:436)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:374)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:302)
at org.apache.jasper.runtime.PageContextImpl.doForward(PageContextImpl.java:694)
at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:665)
at org.apache.jsp.index_jsp._jspService(index_jsp.java:54)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:337)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at login.V_SPAS_SecurityCheckFilter.doFilter(V_SPAS_SecurityCheckFilter.java:108)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Login failed for user ''.

Hi Karthikeyan,
This is not the issue at all. I can open the management studio by the same login id and password and also i can make the database jdbc connection from plain java file.
It does not give me any problem by them.
I'm unable to find the actual problem. May be i'm missing something in connection pooling.
Please help.
Regards
Mina

Hello!!!how can I control an omron plc (sysmac cqm1)with an OPC server?I want to adquire a signal controlling its amplitude and frecuency.How can it be done with OPC server?I already have the NI CD of OPC drivers.Thank you

Hello!!!how can I control an omron plc (sysmac cqm1)with an OPC server?I want to adquire a signal controlling its amplitude and frecuency.How can it be done with OPC server?I already have the NI CD of OPC drivers.Thank you

Hola Jose David, que OPC estas utilizando?, Si tienes comunicación entre tu computadora y PLC pero falla la comunicación entre el OPC y el PLC? La configuración y direcciones entre los dos es correcta? La comunicación es por cable serial?
Espero tus respuestas
Saludos
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

Single step workflow with multiple approvers (without using a group)

Hi,
is it possible to have a single step workflow with multiple approvers without using a group? This is for a contract document.
i want to add a number of users based on particular logic. The approvers are random and do not belong to any particular group.
DO let me know if it is possible or if any of you have done that.
thanks in advance.
regards,
rubio

Hi Rubio,
I believe the behavior would be, if individual users are added as approvers then the system would require each approver to approve the document. However, if you use the user group, you could set the role so that it would be either ALL or ANY.
Regards,
Vikram

Is it possible to create a DVD in iDVD without using the themes they provide?

Is it possible to create a DVD in iDVD without using the themes they provide?

Hi
No Menu DVD
from. Mishmunken
How to create a DVD in iDVD6 without menu (there are several options)
1. Easy. Drop your iMovie in the auto-play box in iDVD's Map View, then set your auto-play item (your movie) to loop continuously.
Disadvantage. The DVD plays until you hit stop on the remote
2. Still easy. If you don't want your (auto-play) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the drop-zone (text needs to be black as well).
Disadvantage. The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
3. Still quite easy but takes more time. Export the iMovie to DV tape, and then re-import using One-Step DVD.
Disadvantage. One-Step DVD creation has been known to be not 100% reliable.
4. (My preferred method) Easy enough but needs 3rd party software. Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn.
Disadvantage. you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
5. The "hard way". Post-production with myDVDedit (free-ware)
Tools necessary. myDVDedit ( www.mydvdedit.com )
• create a disc image of your iDVD project, then double-click to mount it.
• Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
• Set permissions to "read & write" and include all enclosed items; Ignore the warning.
• Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
• Select the menu (usually named VTS Menu) and delete it
• Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned. If it works save and close myDVDedit.
• Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager.
//lonestar.utsa.edu/llee/applescript/dvdimager.html
hope this helps!
From LynnLU USA
www.mediasoftmac.com/dvd-creator-articles/convert-mov-video-to-dvd-on-mac.html#1 29
Yours Bengt W

Can i setup a wifi router with my IPad2 without using a computer ?

Can i setup a wifi router with my IPad2 without using a computer ?

This is going to depend on what wireless router got get. Some want to do all administration functions via a ethernet cable connection for security reasons.
Once the router is configured, you will no longer need a computer.
Try looking for a router that configures through a web browser & allows administration from a wifi connections.
I think the easiest thing will be to have a friend come over & configure with a laptop. I believe that you can configure the router without have a broadband connection. You could configure it at a friends house. Might not want to connect to the friends broadband so not to confuse your friends broadband. ( this is only a worry if the router also includes the broadband model. Just a wireless router without a modem is not worry ).
Robert

Connecting to a sql server database using netbeans 5.5

hi all
if you please could any body tell me detailed steps for establishing a connection to a sql server database using netbeans 5.5
i need to know what driver to use and the format of the url i use in making a new connection
thanks

Uhm SQL (Structured Query Language) is like the base
of all other type like MySQL and Oracle. Um, given the context I think the person was referring to "Microsoft SQL Server". Sometimes people will cut to the chase and refer to the product as "SQL". At those times it's understood by all parties that we're not talking about the query language, rather the Microsoft product.
I think this is one of those times.
See
something i found in two seconds with the wonder of
google http://sqlzoo.net/ & http://sqlzoo.net/w.htm
It's commendable that you're using Google. I'd argue that the OP should be making better use of it, too. But I don't think your response is applicable to this context. JMO, of course.
%

Is it possible to connect labview with opc server without using NI dsc Module ?

Similar Messages

Maybe you are looking for