Is it possible to connect Multiple DUT's in parallel to a single NI 6552 HSDIO for characterization?

I would like to know if I could connect two parallel DUT's to one NI 6552 HSDIO to obtain characterization for both DUT's simultaneously?
Also, I would like to know what the specifications are for CLK OUT if such a configuration is to be done.
Thanks for your help!

How many pins do your DUTs need to use? What kind of responce are you expecting? If you are looking to test a communication protocol, like I2C, these cards are not really built for these kinds of tests. Are you expecting the DUTs to respond at the same time?
Noah | Applications Engineer | National Instruments

Similar Messages

  • Is it possible to connect multiple R/3 systems to one APO system?

    Hi,
    Is it possible to connect multiple R/3 systems to one APO system?
    Kind regards,
    Kris De Smedt.

    Hi Kris,
    Yes, you can connect multiple R/3 systems to one APO system. All you need to do is to maintain connection parameters of all the R/3 systems with APO. (i.e. RFC Destinations, logical systems, partner profiles etc.)
    Regards,
    Naveen.

  • Possible to connect multiple R3/Systems to one XI?

    Hi,
    is it possible to connect mutiple R3-Systems to one XI?
    How does it work?
    Regards
    Stefan

    Stefan,
    You can certainly connect multiple R/3 systems to one XI.
    1. If your R/3 system release is 4.7 then use point 8 from the configuration guide. (RZ70 transaction collects the system data and creates a technical system in the SLD)
    2. If your R/3 system release is < 4.7 (means 46c or 46B, 40B) then you should create a technical system in the SLD.
    3. For any other SAP product with ABAP stack (including R/3 47 system), you should check the SAP_BASIS release if it is 6.20 you should apply XI Add-on to use XI Proxy adapter. For SAP_BASIS < 620 you cannot have XI Proxy adapter. For SAP_BASIS > 6.20 you do not need any add-ons (from this point onwards it is NetWeaver)
    To find SAP_BASIS release -> SPAM Transaction -> Click on Package Level.
    Then create a business systems for each one of them and import them into the Int. Directory when needed.
    Regards
    Shravan

  • Possibility of connecting multiple BW systems to single ECC system

    Hi all,
    I have a requirement in my company to connect multiple BW systems to single ECC system. Would like to confirm whether this may not be supported by all BW extractors in particular the delta mechanism?
    For logistics extractor in ECC side in RSA7 it stores BW System as target which shows they support multiple BW systems as target, but for FI extractors which keeps delta timestamps in BWOM2_TIMEST table, it doesn't store the target system. I'm afraid if we connect multiple BW systems to single ECC system, some of the delta records might go to one BW system and some others go to the other BW system when we execute delta load in both BW systems.
    Thank you very much in advance.
    regards,
    arie

    Hi,
    You can very well connect multiple BW systems to single ECC system and you will not miss any delta as well. In the source system for each delta data source a delta queue is maintained for each target system.
    for e.g. I have two BW systems ABW and BBW connected to AEC system then for 0FI_AP_4 data source we will have DQ1_ABW and DQ2_BBW as two different delta queues (I am not following any naming conventions, actual names will be as per the target system logical name).
    The settings maintained in BWOM2_TIMEST table are across the system and they define some global settings e.g. till what time the FI data should be extracted in BW system, for e.g. the time maintained is 2.00 AM then though you do extraction from multiple systems same data will be extracted till next time interval occurs.
    In summery you can very well connect multiple BW systems to a single ECC system.
    Regards,
    Durgesh.

  • Is it or has it ever been possible to select multiple PDF's and print into a single print stream using Reader

    We have Multiple users who claim they have been able to select multiple PDF's and select print. It then would send to a single stream and end up as one document. These are reader users.
    We have tested under reader 10.1.4 and 11.0.06 and haven't been able to make it work. Has this ever been possible?

    Thanks everyone. That's what I needed to know.

  • How best to connect multiple (not Apple) monitors to mac mini

    Hi all,
    I'm looking to purchase a Mac Mini and need some advice about setting up two non Apple monitors that have both HDMI & VGA ports.
    Can I use USB ports?
    If I connect one on the Thunderbolt and the other to the HDMI port will it work well?
    Can I connect two monitors through one HDMI or Thunderbolt port?
    Can I add other monitors later of I want to?
    Also what cables/adapters will I need.
    Thank you
    Drew    

    Connect one to the computer's HDMI port and the other to the Thunderbolt port using a Mini DisplayPort to HDMI cable or adapter
    <http://www.kanexlive.com/mdphd10ft>
    <http://store.apple.com/us/product/H1824ZM/A/moshi-mini-dp-to-hdmi-adapter-with-a udio-support>
    It is possible to connect multiple displays to the HDMI port by using a HDMI splitter, but all will show the same picture.
    It is possible to connect two displays to the Thunderbolt port but at least one must be a Thunderbolt display, and you can't use the HDMI port.
    It is possible to connect extra displays via USB, but performance is limited
    <http://www.newertech.com/products/viddu2dvia.php>

  • Is it possible, to add multiple USB devices to TC

    Is it possible, to add multiple USB devices using a hub to Time Capsule (as stated for Airport Extreme)?
    Thanks in advance.
    Stefan

    The Time Capsule is an AirPort Extreme with a built-in hard drive, so you can add multiple USB devices if you use a powered USB hub.

  • Can we run multiple sapinst programs in parallel?

    We are planning to upgrade our EP, XI and BW simultaneously. These SIDs all reside on the same server and same OS. Is it possible to run multiple sapinst programs in parallel? I know it may require specifying separate ports for the 2nd and 3rd instance of sapinst. For example: sapinst 1 gets default ports 21212, 21213. sapinst 2 will take 21214, 21215 and sapinst 3 takes 21216 and 21217.
    Has anyone attempted this sort of a thing before? Appreciate your thoughts.

    Never done that before, maybe it works .. however it could run into problems when the sapinst are trying to access the same paths / files.
    Regards,
    Siddhesh

  • Business Contact Manager 2010 - is it possible to connect a Contact with multiple Accounts

    Hi, I'm proficient with Outlook but new to BCM. Currently setting things up but have some Contacts who own more than one company or are on another companies Board etc.  
    My questions is - Is it possible to connect a Contact to more than one Account?
    Many thanks

    Hi,
    Currently it's not possible. The workaround may be to duplicate the contact in Business Contacts to make that happen.
    Regards,
    Melon Chen
    TechNet Community Support

  • Is it possible to connect a mac book pro via thunderbolt and a dvi switchbox (multiple computers) to a thunderbolt display?

    Hi,
    I'm planning to buy a thunderbolt display.Since I have not only apple computers with a thunderbolt port I wonder if it's possible to connect my mac book pro via thunderbolt and a DVI switchbox via a "mini displayport to DVI connector" to the thunderbolt display at the same time. Thunderbolt is a bus architecture. Thus there must be an ingoing and an outgoing port on the display. The rearview of the display I've seen so far don't show this:
    If this is not possible then I must question the market chances of this product. Seems as if the product marketing guys exaggerated the launch of the thunderbolt technology.
    -ais-swiss

    ais-swiss wrote:
    How to connect windows laptop (vga) to thunderbolt display?
    AHHH??!!!!!!  Was that your original question??   I assumed you were trying to output FROM your computer (MacBook Pro w/ Thunderbolt) to the new display and then OUT to be the video source to a DVI switcher.
    MB Pro w/TB ---> TB Display ---> mDP-to-DVI adapter ---> DVI switcher
    So it seems as if it's not possible to use the thunderbolt display with the mini display port adapter to DVI you've mentioned.
    I did not understand that you were trying to use other PC's into a switcher and then THAT Video source to connect INTO the TB display.   If THAT is what you're trying to do, then NO....  You can NOT use the new TB Display to be used to display "FROM" a DVI switcher (and also can NOT be used to display from other Non-TB-Apple computers).
    I've also called apple. The statement was that one needs a computer with osx 10.6.x in order to connect the thunderbolt display. That makes it impossible to hook a windows pc or older mac to the new and shiny thunderbolt display.
    I wonder why apple doesn't state this in their technical descriptions...?
    -ais-swiss
    Actually, the state that information all over the Tech Specs on the Apple Store website.
    http://store.apple.com/us/product/MC914LL/A?mco=MTY3ODQ5OTY
    Here are two different statements from that webpage:
    So yes.... other NON-Apple PC's (or non-TB devices) do Not have the Thunderbolt technology (hardware/software) to be able to communicate with the TB display or other TB devices.

  • Is it possible to connect to Mysql multiple databases?

    Hi all,
    Is it possible to connect to 2 or more Mysql databases from a single report using Crystal report and if yes, then how can I do that ??
    Thanks,
    Prashant

    Hi Prashant,
    you can user Business view manager to connect to more than one datasource using Dynamic data connection.
    here is the link for a PDF which contains all the details
    [BVM|http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_bv_admin_en.pdf]
    hope this helps
    Regards
    Aditya Joshi

  • Can you connect multiple VMM Instances to a single Operations Manager 2012/R2 Deployment

    Hi Everyone,
    Just seeking some clarification around the Operations Manager and Virtual Machine Manager integration.  Is it possible to integrate multiple Virtual Machine Manager 2012 Deployments with a single Operations Manager 2012 Deployment or is the connection
    between VMM and OM a 1:1 relationship?
    Thanks in advance,
    Hayden

    Yes VMM and OM 1:1 is supported. 
    Theoretically many VMM can integrate with single OM but its not very realistic and well tested as it puts several configuration and performance constraints on each of the VMMs.
    I’d recommend installing SCOM (inside a VM is fine)  per VMM if possible .
    [Disclaimer] This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all.

  • Connect Multiple Ingrian server in same JVM

    Hi All,
    I have faced an issue where I have to connect multiple Ingrain server depending on some choice in same JVM.However I can able to set one server for jvm by placing the IngrianNAE.jar and IngrianNAE.properties in jre/lib/ext and every things running well, but if I tried to modify the Ingrain properties file during runtime through System.setProperties(), it always  pick the old  value instead the new one. So my question is that whether it is possible to configure  for same JVM or not.
    Thanks & Regards

    Any Inputs...?

  • Is it possible to use multiple displays on mac mini?

    Is it possible to use multiple displays on mac mini?
    I have a mac mini that I think is from 2009. The processor is 2.26 GHz Intel Core 2 Duo and 2 gb memory that I´d like to use with multiple displays (2). Is this possible??

    Baddoll wrote:
    Is this possible??
    yes.
    connect monitor #1 with the Mini DVI to DVI adapter (should have come with your Mini)
    connect monitor #2 with the mini-displayport to DVI adapter (needs to be procured separately)

  • Connecting multiple services together: Google Drive, Drop Box, and Cloud.

    Is there a way to connect multiple services  such as Google Drive, Drop Box, and Cloud into one program that allows to you manage all three at once? I am trying to look for a program that can connect all three together into one. Is there such a thing?

    No such program exists that I've seen, and given the proprietary nature of each service, particularly iCloud, I very much doubt such a program would be possible.
    Regards.

Maybe you are looking for