Is it possible to connect multiple R/3 systems to one APO system?

Hi,
Is it possible to connect multiple R/3 systems to one APO system?
Kind regards,
Kris De Smedt.

Hi Kris,
Yes, you can connect multiple R/3 systems to one APO system. All you need to do is to maintain connection parameters of all the R/3 systems with APO. (i.e. RFC Destinations, logical systems, partner profiles etc.)
Regards,
Naveen.

Similar Messages

  • Consideration during Multiple ECC systems with One APO system for PP/DS

    Hi All,
              We have a scneario that Multiple ECC systems and Third party ERP systems and Legacy systems .What are the points to be considered for this scenario when using with PP/DS?

    Hi,
    The factors to be considered will greatly depend how the multiple ERP systems are split, if they are split on geographical aspects only (all modules in all ERP systems then no major issues) - the problem will become a little challenging when Multiple ERP are split with different modules in different instances then major thought has to go in your CIF design (the IMs has to properly though of ).
    It is not a detailed explanation but just the line of thought.
    Regards,
    Vineet

  • Is it possible to have multiple search results page using one Search Enterprise Center site?

    Hi,
    We're using SharePoint 2013 and I'm trying to modify the search results page for one site collection. By default, it uses the search results page from the parent site which is the search center being used by default for the web application. I need to make
    sure that the site collection will only retrieve search results within the site collection (search everything has to be disabled). I found a way but I had to create another search center site to accomplish this, otherwise, it will affect the search center
    site of all other site collections on the web app.
    Now is it possible to have multiple search results page using one Search Enterprise Center site?

    Hi,
    According to your description, you want to retrieve the search results within the site collection.
    As a workaround, you can create a custom result source for the site collection and you will retrieve the search result within the site collection.
    More information about how to create result source in SharePoint 2013, please refer to :
    http://technet.microsoft.com/en-us/library/jj683115(v=office.15).aspx
    http://techmikael.blogspot.com/2013/04/limiting-search-results-in-sharepoint.html
    Best regards

  • Connecting to Multiple ECC systems via one Gateway system(Dynamic System Selection)

    Hi Experts,
    We have multiple ECC systems and one Gateway server. We want to connect to these different ECC systems using one GW system.
    I have created System Aliases for these ECC system in GW system. For a service, i added 2 system aliases.
    Now we are looking for the solution where UI can provide the system alias (it wants to connect) as a parameter while calling oData Service.
    Please help.
    Regards,
    Rohit

    Hi Rohit,
    we have a similar scenario where we have two system aliases for one service. Both aliases point to the same system, but different clients; it should not make a difference though, having different systems. The feature you are looking for is Multiple Origin Composition (MOC).
    There are a couple of things you have to consider:
    in the SEGW the entity to be called has to be marked as addressable
    the URI of the service needs to include the tag for MOC (;mo) --> http://sapgw.domain.org:8000/sap/opu/odata/sap/ZSOME_SERVICE;mo/entityset
    Without the ;mo the call will be routed to your default alias. The ;mo will route the call to both systems. Using MOC will generate an additional key property into your entities --> SAP__ORIGIN. The property is the alias. If you want to route to a specific system you have to provide the SAP__ORIGIN like providing normal key properties in your requests.
    This will look like this:
    <content type="application/xml">
      <m:properties xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices">
        <d:SAP__Origin>SOME_ALIAS</d:SAP__Origin>
        <d:Identifier>SOME_IDENTIFIER</d:Identifier>
        <d:Doublet />
      </m:properties>
    </content>
    The original Entity only consists of the key property "Identifier" and the property "Doublet". "SAP__ORIGN" is added via the ;mo.
    Hope it helped...
    Holger

  • Possible to connect multiple R3/Systems to one XI?

    Hi,
    is it possible to connect mutiple R3-Systems to one XI?
    How does it work?
    Regards
    Stefan

    Stefan,
    You can certainly connect multiple R/3 systems to one XI.
    1. If your R/3 system release is 4.7 then use point 8 from the configuration guide. (RZ70 transaction collects the system data and creates a technical system in the SLD)
    2. If your R/3 system release is < 4.7 (means 46c or 46B, 40B) then you should create a technical system in the SLD.
    3. For any other SAP product with ABAP stack (including R/3 47 system), you should check the SAP_BASIS release if it is 6.20 you should apply XI Add-on to use XI Proxy adapter. For SAP_BASIS < 620 you cannot have XI Proxy adapter. For SAP_BASIS > 6.20 you do not need any add-ons (from this point onwards it is NetWeaver)
    To find SAP_BASIS release -> SPAM Transaction -> Click on Package Level.
    Then create a business systems for each one of them and import them into the Int. Directory when needed.
    Regards
    Shravan

  • Possibility of connecting multiple BW systems to single ECC system

    Hi all,
    I have a requirement in my company to connect multiple BW systems to single ECC system. Would like to confirm whether this may not be supported by all BW extractors in particular the delta mechanism?
    For logistics extractor in ECC side in RSA7 it stores BW System as target which shows they support multiple BW systems as target, but for FI extractors which keeps delta timestamps in BWOM2_TIMEST table, it doesn't store the target system. I'm afraid if we connect multiple BW systems to single ECC system, some of the delta records might go to one BW system and some others go to the other BW system when we execute delta load in both BW systems.
    Thank you very much in advance.
    regards,
    arie

    Hi,
    You can very well connect multiple BW systems to single ECC system and you will not miss any delta as well. In the source system for each delta data source a delta queue is maintained for each target system.
    for e.g. I have two BW systems ABW and BBW connected to AEC system then for 0FI_AP_4 data source we will have DQ1_ABW and DQ2_BBW as two different delta queues (I am not following any naming conventions, actual names will be as per the target system logical name).
    The settings maintained in BWOM2_TIMEST table are across the system and they define some global settings e.g. till what time the FI data should be extracted in BW system, for e.g. the time maintained is 2.00 AM then though you do extraction from multiple systems same data will be extracted till next time interval occurs.
    In summery you can very well connect multiple BW systems to a single ECC system.
    Regards,
    Durgesh.

  • Is it possible to connect Multiple DUT's in parallel to a single NI 6552 HSDIO for characterization?

    I would like to know if I could connect two parallel DUT's to one NI 6552 HSDIO to obtain characterization for both DUT's simultaneously?
    Also, I would like to know what the specifications are for CLK OUT if such a configuration is to be done.
    Thanks for your help!

    How many pins do your DUTs need to use? What kind of responce are you expecting? If you are looking to test a communication protocol, like I2C, these cards are not really built for these kinds of tests. Are you expecting the DUTs to respond at the same time?
    Noah | Applications Engineer | National Instruments

  • Connecting Multiple R/3 Systems to one BW System / What is to be considered

    Dear All,
    I have the following requirements.
    We have the following requirement to connect to 2 different R/3 systems (RS1 & RS2) to one BW System (BWS).
    In BW , we will build two flows corresponding to project A et B. Both flows are independant.
    In BW System (BWS) the flow for project A already exists.
    We have to build the flow for project B
    1. What is to be considered?
    2. Is there any approach to be followed?
    3.How to maintain or handle master Data and infoojects issues? This question because all standard Infoobjects will be used by
       both.
    4. How can i differenciate between data comming from system RS1 & RS2?
    5. How to get only data for the corresponding system loaded?
    6. What are the points to be considered?
    7. What about the authorization?
    8. Any Document or how to?
    Thanks

    Hi Gilo
    1. What is to be considered?
    Nothing much, different ECC systems will have different logical system names, so creation of source system is not a problem. All the DataSource related tables also have LOGSYS name as a key. So you can identify same datasource from different sources
    2. Is there any approach to be followed?
    See below
    3.How to maintain or handle master Data and infoojects issues? This question because all standard Infoobjects will be used by both.
    Master Data need to be compounded with source system id if they are different in different system.
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6399e07211d2acb80000e829fbfe/content.htm
    4. How can i differenciate between data comming from system RS1 & RS2?
    Refer to ans of 3 for master data. Transaction data as you said would be in different flow altogether.
    5. How to get only data for the corresponding system loaded?
    You will have different PSA and InfoPackage for DataSources as DataSource is source system specific. So you can have completely independent process chain for each system.
    Normally loading delta is not a problem, but loading CO-PA data from both the systems via delta method is not possible.
    6. What are the points to be considered?
    already discussed.
    7. What about the authorization?
    Authorization is based on BW objects, not source system. So that will remain same.
    8. Any Document or how to?
    Need to search
    Check this thread
    http://forums.sdn.sap.com/thread.jspa?threadID=1792256
    Regards
    Anindy
    Edited by: Anindya Bose on Feb 16, 2012 8:29 PM

  • How to connect two BW systems to one ECC system?!?

    Hi Experts!
    We want to connect our ECC system (P11) to multiple SAP BW systems. Therefore we made a system copy of our productive BW System (P81) and create a new second BW System (T81). When I want to restore to connection to the P11 in the T81, Iu2019ll get the following error message:
    u201CDie Verbindung CA wird im Quellsystem P11_001 als Verbindung zum BW T81CLNT001 genutzt.
    Soll diese Verbindung im Quellsystem gelöscht werden? Nach erfolgreicher Löschung wird der Anschluss wiederholt.u201C
    In English this message means something like that: u201EThe connection CA is used as a connection to the BW T81CLNT001 in the source system. Should this connection be deleted in the source system? This connection can be repeated after successful deletion.u201D
    Now I ask myself: How can I connect our new BW System to our ECC System, without destroying the old connection to our productive BW system?!?
    Have anyone of you an idea how we can handle this issue?
    Thanks in advance!
    Regards, Alex

    Hi
    This happens because of RFC settings duplication as your new BW system is copied from Old one.
    First you restore the Production system connection by deleting the existing RFC.  But this will delete the new connection you have created ( that is what your dialog message is saying) 
    Basically , before creating new connection you need to delete some table entries manually , then you can connect both the system to your same source system
    Please find the link below where I mentioned the table names from where you need to delete duplicate entries manually.
    How to delete old source system assignment and assign new source system.
    Regards
    Anindya
    Edited by: Anindya Bose on Oct 13, 2011 9:01 PM

  • Connect two BW systems to one source system

    Hi Experts!
    I would like to know if I can set up two BW systems connect to one source system.  We copied and built new BW system (BW2) from existing BW system (BW1).  We need to have both system connect to one source system.  When I execut Restore from BW2 - RSA1 - Source System, I'm getting a following prompt:
    "Connection cannot be used. The connection BB is used in the DEV400 source system as a connection BW1400 to BW. Do you want to delete this connection in source system".
    If I select "Delete" then it replace exising connection between BW1 - DEV and creates new connection BW2 - DEV.  If I go back to BW1 and do restore then same thing happens as BW2 connection removed.
    Is there anyway we can set up two BW systems connection to one source system with restore?  Connection works fine since each one can connection with no issues.  Just when I do restore, it removes other connection.
    Thanks.

    Check if it helps:
    Loading two different SAP BW system from one SAP R/3

  • Is it possible to connect 2 Creative Web Cameras to one computer?

    Hi all.
    I want to connect 2 Web cameras to one computer and see li've video in two windows simultaneously. I have bought 2 identical LabTec Web Cameras, and when I connect to both cameras simultaneously the both video streams freezes.
    Does anybody have any experience connecting 2 identical Creative Web cameras to one computer? Can they stream simultaneously without freezing?
    I am planning to buy 2 Creative WebCam NX Pro, can they stream simultaneously without freezing?
    Im using Windows XP SP2 and USB 2.0.
    Regards,
    Hemmingsen

    Thank you for your reply!
    I have tried to connect to different Web cameras to the same PC - and that worked!
    I have tried to connect to identical LabTec Web cameras to the same PC - and that did NOT work!
    It looks like it could be a driver problem.
    I am working on a litte robot project and in connection to that, I need two identical cameras simultaneously to take 2 pictures. I that way I can analyse the 2 pictures and calculate the distance to objects. But the two pictures MUST be as identical as possible - therefore I want to use 2 identical cameras.
    I would like if anybody who has 2 identical Creative Web cameras could do this little test:
    1) Connect 2 identical Creative Web cameras to 2 different USB controllers (WebCam NX Pro preferred)
    2) Open "My computer"/"WebCam "
    3) Open "My computer"/"WebCam 2"
    4) Check that both windows shows li've video simultaneously
    5) Reply the result and the camera model to me
    I get bankrupt if I buy more cameras that I cannot use - so I hope anybody can help me.
    Regards,
    Hemmingsen
    Message Edited by hemmingsen on 09-27-2005 05:31 PM

  • How do we connect multiple Apple ID's to one common account?, How do we connect multiple Apple ID's to one common account?

    My wife and daughter both have iPhones - they like different music and Apps.  How can we keep their iTunes accounts separate, but allow them to both get access to the paid apps and music we currently have in the one account?

    Hello JamyandTami,
    It sounds like you purchase all the apps and music for your wife and daughter with one Apple ID, but you want to sync different information to each iPhone.  I recommend using method 2 in the article below and just syncing the information you want to each phone using a playlist for the music and selecting only the apps you want on each device:
    Method Two
    You may use multiple devices on a computer without the need to create multiple user accounts. To do this, you can set iTunes to update each device with only certain playlists. This method allows you to put all your music on, say, your iPod and keep your iPod shuffle updated with only your workout music. Here's how to do this with iTunes:
    Create new iTunes playlists that contain all the music that you want to sync to each device.
    Learn how to sync your device.
    I recommend reviewing the full article if you would like to see other options:
    How to use multiple iPhone, iPad, or iPod devices with one computer
    http://support.apple.com/kb/HT1495
    You can also download only what you want from the App and iTunes Store to each respective device using the steps in this article:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    With either of these methods, you would want to disable automatic downloads on each device so that any new purchases are not automatically downloaded on your wife's phone when your daughter downloads something and vice versa:
    iTunes Store: How to enable Automatic Downloads
    http://support.apple.com/kb/HT4539
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Is it possible to connect HP DESKJET 1510 All-in-One series Wireless printer without USB cable?

    my mom recently bought me the HP DESKJET 1510 All-in-One series so i have an at home printer for school work. but when we bought it we did not know there was a certain USB that had to connect to the printer. so we bought the wrong one. now i have a project due and i cannot print. we have a small USB that fits it but its hard to connect it to the computer and printer because its so small. so if we can have it sent to the printer without the USB that would be perfect!

    Hi,
    No, in many cases printers won't come with USB cables. You need a cable which is similar to the following one:
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to connect multiple nanos and minis to one computer and share content

    I have 3 iPod nano's and 1 iPod mini in my house and would like to make a central repository of music on one computer that can be shared across nanos where users can select all or some of the available tunes. How can I do this?
    Dell   Windows XP Pro  
    Dell   Windows XP Pro  

    You could use the update option "automatically update selected playlists only" would allow you to create a playlist specifically for each iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used by the other iPods. Make your playlist a Smart playlist and limit the size to just below the advertised capacity of your iPod ( for example, around 3700MB for a 4GB or 1800MB for a 2GB Mini or Nano). You can read more about playlists at these links:
    iTunes: Creating playlists of your favorite songs
    How to create a Smart Playlist with iTunes
    To select the update option.
    iTunes 6
    Connect your iPod to your computer and when it appears in the Source list go to Edit>iTunes>Music Tab (iTunes>Preferences>Music tab on a Mac).
    Automatically update selected playlists only. With this option, iTunes automatically copies the playlists you have selected to the iPod when you connect it to the computer.
    iTunes 7
    Connect your iPod to your computer and when it appears in the Source list click on it to show the preference tabs in the main pane. Choose the following option and click "Apply".
    Sync Music - Selected playlists. With this option, iTunes automatically copies the playlists you have selected to the iPod when you connect it to the computer. You'll find this in the Music Tab.

  • Error connecting multiple BW systems to one OLTP system

    Hi BW Gurus,
    As part of a major project we had to create a copy of our production BW system and thus have two BW systems connected to one production R/3 system. Before we proceed with the production systems, we decided to try it out with our staging systems.
    1) Created a copy of STG BW (already connected to STG R/3) and renamed it to TST BW.
    2) Transaction BDLS, renamed the logical system ID
    3) Made sure all partner profiles were available and active
    4) Since there was no connection between TST BW and R/3 STG, tried to activate the source system in TST BW. As per OSS note 886102, tried the restore functionality but we are running into a strange error.
    Table RSBASIDOC in the source system already has an entry for STG R/3 and STG BW with IDOC TYP ZSSA015 and Prefix "SA" and now it complains that since this prefix alrady exists, it cannot create another entry with the same prefix for TST BW and STG R/3. It gives us the option to delete the existing entry and create a new one for TST BW. This in turn de-activates the delta between STG BW and STG R/3 and we can successfully initialize with the new system.
    This process turned the queue entry in RSA7 red for STG BW and created a new one for TST BW (green). Delta stopped working for STG BW.
    How can I have both the systems connected and run delta process simulataneously? I have read OSS note 775568 but this is after the fact that the two systems are already connected.
    If I have to start from scratch, can someone please outline the steps involved?
    Do I have to restore the source system or is there an alternate way? I cannot see how the delta would work if there is no connection betweeen the two systems.
    Do I even need to worry about initializing with the TST BW System or can I just run the delta process and it would automatically add another entry in RSA7.
    Any help would be truly appreciated and rewarded!!
    Thank You.
    Sreedhar

    Looks like a much bigger issue than that. We did create the partner profile in WE20 but that didn't help either. It still complains about the prefix. This 2 Character prefix value is actually derived as the concatenation of the first letter of the BW system name and starting alphabet in a sequence. In our example STG BW has prefix of SA and the basic idoc type is ZSSA015. Based on this, TST BW system should have prefix of TA and basic idoc type might be ZSTA016. The program initially looks at RSBASIDOC table for source system and finds value SA and complains that this cannot be used again.
    I have seen messages in this forum where people have actually done this and hopefully someone would reply back as to how to resolve this issue.
    My main question though is, do we have to restore or activate or do not have to do anything to the source system after the copy of BW systems? None of the above three options seem to work for us right now.
    Any ideas?
    Thank You
    Sreedhar

Maybe you are looking for