Is It Possible To Connect PS2 To Internet Using The AirPort Express

Hi...
i was wondering if it is possible for me to connect my PS2 Slimline to the ethernet port on the AirPort Express and then connect my AirPort wirelessly to my router and get PS2 online
Is it possible to do this?

Callumpy, Welcome to the discussion area!
Yes but only if your AirPort Express (AX) uses WDS to wirelessly join a network.
If your wireless network is created by another AX or an AirPort Extreme base station (AEBS) it shouldn't be a problem.
If your wireless network is created by any other product, it probably won't work since most 3rd party devices are not compatible with Apple's WDS.

Similar Messages

  • Can I connect multiple Mac's using the Airport Express?

    As subject. I have got an Intel iMac and a MacBook. Can I connect them using the Airport Express? Or in another word, to create a network among them that I can see the other Mac on one Mac?
    Sorry, if I raised a silly question. But really like to know.
    Many thanks in advance.
    Gary

    Can I connect them using the Airport Express?
    Yes
    Or in another word, to create a network among them that I can see the other Mac on one Mac?
    Yes

  • How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

    Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

    Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
    To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

  • Can i use the airport express in my hotel with wired connection?

    I'm going to be traveling quite a bit coming up and staying in hotels with wired internet connections in the room.  Can i use the airport express to connect with the hotel's internet connection and then my ipad and/or iphone 4S?  I'm new to Apple products so will certainly appreciate any info that may help.  Thank you!

    You will need to have AirPort Utility installed on the iPad and/or iPhone. It is free on the App Store
    App Store - AirPort Utility
    Connect the AirPort Express 802.11n to the hotel Ethernet jack using an Ethernet cable
    Power up the AirPort Express and wait 40-45 seconds
    Tap Settings, then tap Wi-Fi on the iPad
    Tap the AirPort Express under the heading of Set up an AirPort Base Station
    AirPort Utility will take a moment to to analyze the connection and then you can proceed with the easy guided setup
    Once the AirPort Express is configured, you should not have to set it up again at the next hotel. But, you could if you want to.

  • Can I use my iPhone hotspot for internet through the airport express?

    I want to use the airport express with the internet from my iPhone hotspot without a regular ISP

    Lahoman wrote:
    Don't try to charge ur iPhone with ur iPad charger or else u will regret like my iPhone battery life is very weak now..!!
    You may be having problems with your battery. However, they were not caused by using your iPad charger. The iPad charger is compatible with the iPhone and can safely be used with it. If your phone is less than a year old, you may want to take it to your nearest Apple Store and have them take a look at it. If the battery is not functioning correctly, they will replace it for you.

  • Can I use the Airport Express only with a LAN connection?

    Because I want to connect my macbook (+ all other hardware) via WLAN with my Speedport Router. Which is connect via LAN cable with the Airport Express. Can I then deactivate the WLAN function in the Airport software?
    When I try this, I can configure the setup. This works till a restart, after that I cannot find the Airport Express. Already I connect the macbook with the LAN-cable it works again.

    look that
    so i have connected my components.
    i only want to deactivate the WLAN in the Airport Configuration. if i connected in this way it works without problems. after restart i cannot find the airport express.

  • While using the airport express can I listen to music streaming from the Internet?

    While using the airport express can I listen to music streaming from the Internet?

    The music must be in your iTunes library.
    Or, you can try to add a special application like Airfoil that may allow you to stream any audio signal on your computer to the AirPort Express. It might work.
    http://www.rogueamoeba.com/airfoil/

  • HT1515 do you have to do to get internet from the airport express?

    what do you have to do to get internet fron the airport express?

    Plug in your Cable or DSL modem into the Airport and setup the Airport for wireless Internet.

  • Is it possible to access my DVR from the Internet using an Airport Express and Airport Extreme?

    I would like to use my Airport Express to connect to my DVR and use it to access the Internet by setting it up to wireless extend my Airport Extreme network?
    This would allow me great flexibility to place the DVR wherever I wanted.  I would create a static IP address for the DVR but would I also have to create one for the Airport Express as well?  What would I put as my Gateway address?  Would it be the IP address of the Airport Extreme or the Airport Express?
    Looking forward to the advice to see if this is possible...

    It may not be compatible with the iPad. See below for reference.
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • Can I use the Airport Express to connect to a Linksys Wireless Network and then use the Ethernet port on the Airport for a wired connection to a device for internet access?  Would I be able to then also use that Ethernet pt to a Ntwk Hub for more wired c

    Thanks for the help.  Looked but not clear on what I am trying to do as being possible.  Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it? 
    I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located.  Would prefer to replace Linksys with all Apple, but just not possible financially yet.  Thanks for the help.

    If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.

  • Using the Airport Express to connect iPod Touch to internet

    I'm getting an iPod Touch for Christmas but I don't have a wireless router.
    How exactly do I connect through the Airport Express?
    Do I just plug it into a wall socket and plug my Ethernet cable into it?
    http://img528.imageshack.us/img528/4391/specstop06072004hp0.jpg
    Message was edited by: VIPea7

    You own an Airport Express and use it for Wlan?
    If this is the case just connect to your wlan via the new Ipod touch.
    What you can't do:
    Use your Airport Express without any connection to a dsl-line or another router that is connected to the net. It would be helpful if you could describe your complete setup.
    Joachim

  • Can I use the airport express as a repeater/range expander but without being connected to the modem with the ethernet cable?

    I have a mac pro (2010 mid) to set up the airport

    My 2003 Airport Extreme I guess does not provide this "enable extension of other Wireless Device" option in Airport Untility under "Wireless",  because it is too old?
    Correct. You will need one of the "square" AirPort Extreme versions if you want to do this.
    Another question, do I need to buy a new Airport Extreme to be able to extend my Wi-Fi signal with the New Airport Express I just bought?
    Yes, or another new AirPort Express. But, you cannot connect a hard drive to an AirPort Express. You can with an AirPort Extreme in case you were planning to add a hard drive.
    One last question, I believe I understood that if I have the new Airport Extreme and use it with my Airport Express to extend the Wi-Fi Signal, I will be able to do this without my DSL Ethernet cable connected to the Airport Express?
    The DSL cable will need to be connected to the AirPort that you designate as the "main" router on the network....assuming that you want to be able to connect to the Internet.
    The other AirPort will connect using wireless only....assuming that it is located where it can get a good wireless signal.

  • I cannot set up either of my HP printers wirelessly using the AirPort Express.  Can't connect my iTouch either.

    I have an HP1102 Laser Printer and an HP7520 All-In-One Printer.  I am unable to set up the wireless connection with either of them using a new AirPort Express.  My Internet Provider is Time Warner, and I am using the AirPort is connected to their modem.  I have internet access with my iMac, iPad, iPhone, and MacBook, but cannot access the internet with my iTouch [4th generation I think].  I get the message "unable to join the network" after I put in my password.  I successfully connected to the internet at my neighbor's house, so I know it's not the iTouch.  HELP!  I have been struggling with this for over a month.  First my old router went out.  I tried to additional routers before I went to the Apple Router and I am still having trouble.  Time Warner says it's not the modem.  Sorry this is so long ... but I am soooooo frustrated.

    At this point I would recommend that you perform a complete power recycle of your networking hardware. Check out the following AirPort User Tip for details. Please post back your results.

  • Possible to connect hub or bridge out from Airport Express?

    Sorry if this is redundant; I've looked for a post like this but not specifically found it.
    I'm running a network that is comprised: DSL Modem -> Cisco Wired VPN Firewall/Router -> Airport Extreme (via Ethernet) -> Two Airport Express (One in Living Room, One in Bedroom), via wireless and set to extend the network (connecting the AX to the AE via wire is not possible). The entire network works just fine; both AX work fine, connect fine, good signal, etc. My dilemma is that as it sits, the AX ethernet out can be connected to either +(choose one)+the television OR the DirecTV receiver OR the AV receiver.
    +*Obviously, I'd like to connect to all three.*+ I'm considering two options, and wondering about their viability.
    1. Connect a hub or bridge to the ethernet out of the AX, and connect the TV, DirecTV and AV Receiver to the hub/bridge.
    2. Replace the AX in the bedroom with an AE, which would be set to extend the network and use the ethernet ports on it.
    I would appreciate comments on this; if both will work, is one approach necessarily better than the other? Also, if appropriate, any tips on settings as well. *Thanks in advance!*

    I added a Cisco switch ( I trust their stuff for reliability...even though it's just s awitch, I'd rather pay the $12 more to buy Cisco vs. Fry's house brand), and it is working like a charm. Netflix is streaming to our Flat Screen, internet radio is streaming to our AV Receiver, we're able to stream our iTunes from several computers in the house to our AV Receiver, and we are receiving on demand DirecTV. Thanks for the help!

  • Connection problems when I use multiple Airport Expresses

    I have one Mac that I use to stream music to multiple Airport Express's. Its seems that when I connect to 3 expresses things work fine. If I connect to 4 the sound cuts out on all speakers.
    Is 3 the limit or am I doing something wrong?

    Yes you can but....
    With the apex in the ceiling you may get a signal loss from your main wireless system. To be able to do what you want in a whole home sound system they all need to be on the main wireless system. You also have to plug them in to a wall outlet which may be an issue with your fire regulations with them inside the walls/ceiling. With airplay you have some limitation also. If she has an ios device and likes say pandora she can only do it to one set of speakers/APex. Only itunes from a computer can do multiple/house party sound. I have 2 APex in my house and love them all. If your main wifi is out of range for some of the new APex's you can run 1 cat5/6 (APex is 10/100)  and make a new network and bridge the rest to it. As long as your new wire is connected to your main network you will stay on the same network.
    So now you get sound and a roaming wifi through out the house. (that's what I did but not in the ceiling.)
    Sonus are good but $$$. by then rewire!

Maybe you are looking for

  • Values not getting populated in sapscript

    Hi, i have written a subroutine pool with ENTRY form . which is configured in NACE. when i run the T-code VT03N. in debugging mode in the subroutine i am getting the values . But the values are not gettng populated in sap script. open_form , write_fo

  • Error "Part1 will not be done for the excess GR quantity" in STO GRN

    Hi, While posting STO grn the error message is displayed "Part1 will not be done for the excess GR quantity". We have checked CIN settings for Excise groups, the "GRs per EI" is maintained as "2 Multiple goods receipt, multiple credit". In J1ID, for

  • Fscm ageing report

    Dear experts, We have implemented the FSCM functionalities: Credit and Collection Management. what is the FSCM report for ageing? We know ukm_bp_display, is it the only one? We wish that the ageing reports start calculating it from invoice expire dat

  • Creating a Form in Acrobat Professional 8

    I am attempting to create a fully-interactive PDF form, using an MS Word Document which I created using Word 2007 on my system, which is Windows Vista Home Premium.  I want the colleagues to whom I send this form to be able to complete it on line, an

  • Can't get my yahoo email to work

    Hi there,After the battery of my 9360 Blackberry died, I just bought a new 9720 two days ago in Dubai, thinking that I can just put the same SIM card (from the 9360) of my home mobile provider SwissCom into the new 9720, and that I can just continue