Is it possible to control the cursor of a XY-graph via Keyboard and read the y value of the curser x-position?

I have following problem when I control the cursor via an attribute note, it is neccersary to free the cursor, but then it is not possible to read the y-Value of the cursor position. I want to control the cursor via keyboard and buttons, but with the funtionality of attribute setting "cursor fixed to plot".

You know the X position so just read the Y value by reading it straight from the Y array instead of from a property node...
Alternatively unlock the cursor if the position control has changed...and lock it again if it is constant for n milliseconds; to produce the Y value from the Y property.
MTO

Similar Messages

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

Is it possible to control the duration of a video clip in IMovie? Speed

Is it possible to control the duration of a video clip in IMovie? Speed
it up/slow it down?

I actually think the content gets smoother in faster mode. But maybe that's just my opinion.
By the way, the fast/slow/reverse effect is pretty sensitive, i use it for my fight scenes in movies and I can only raise the bar one notch faster before it starts to look cheesy.

Is it possible to control the parallel port with Lookout 5.0

I want a simple demo setup on a PC, so I can control the 8 data bits of the parallel port. Example, to use START p/b that would toggle bit 0 and data returned on bit 1.

It is possible to send bytes to the parallel port using the ASCII object within Lookout. However, it is presently not possible to control the state of the individual bits on the parallel port with Lookout.
If you need to control the individual bits on a parallel port, consider using LabVIEW. It is much more powerful when programming serial and parallel ports.

Is it possible to controll the positioning of a new window when someone clicks one of my links

I was wondering if it was possible to control the positoning of a new window that pops up when someone clicks one of my site document links on my dreamweaver site. When a link is clicked and the new window pops up, I'd like to control the window size and positioning of the new window. Is this possible without having to use a tooltip or other option?

Some browsers will display pop-up windows in the parent window, some will open them in a new tab or new window. I'm afraid there is nothing you can do about end user settings.
Creating link to open in a Pop-Up window using DW and the Behaviors Panel
http://www.cbtcafe.com/dreamweaver/popup_text/index.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Can I control the change bar position?

In my attach file, I want to control the change bar position. the "red " change bar position.

You can move the change bars farther away from the text frame, you can change the color and thickness of the change bars, but you cannot tell FrameMaker where to start and stop a change bar. In your case, FrameMaker is showing a change in each row of the table; hence, each change bar is shorter than the height of the row. This is the way FrameMaker indicates changes in the content of table cells. You cannot change it. You cannot tell FrameMaker to make consecutive change bars in consecutive table rows continuous.

Is it possible to control the order that text flows appear when using them as text insets?

I want to create multiple flows in a FrameMaker file which I can then insert as text insets. I would like to choose the inset using the Body Page Flow: dropdown list. However, there seems to be no order, alphabetical or otherwise, in which these flow appear in the drop down list. Is it possible to control this order, or is there a particular reason it appears the way it does?
Cheers,

IIRC, the flows are displayed in the order that they were created.

Programmatically changing x axis and reading y axis value of multiplot cursor on xy platform

Hi Wonder if it is achievable. I had a go but failed!
I cant create multiplot cursor xy graph from properties list. However it seems to be possible using cursor legend. Which is fine for my application as cursor could be created once and i do not require to show cursor legend. However, I do need to read each value of plot into numeric indicators (not cursor legend) especially when x scale is moved along the graph. Is it possible or am I asking too much?
Best Regards
K Waris

Read the post just before this one! (Its mine, migth help you)

Control your mac from apple tv using bt keyboard and mouse

Hello, is there a way to control a mac from the apple tv using the mouse and keyboard paired with the apple tv?
My mac and apple tv are in diferent rooms and I would like to use my mac with the mouse and keyboard from the living room.
I have trayed some ipad/iphone apps to control my mac while mirroring mac to apple tv but it doesn't work very well for me due to the lag of time...
I have been searching in internet about this but I didn't find much. I am wondering if maybe there is an app or something that can do what I want.
I have this devices to work with:
Macmini with apple bluetooth keyboard and magic mouse
Apple TV3
Ipad 3
Iphone 4s
Thank you very much

Welcome to the Apple Community.
Jorge1981 wrote:
Hello, is there a way to control a mac from the apple tv using the mouse and keyboard paired with the apple tv?
No.

Is it possible to control the height of the Portfolio panel via the PDF Portfolio itself?

Hi All,
Is it possible to embed into a PDF Portfolio kind of a directive to Adobe Acrobat Reader what should be the height of the Portfolio panel (red line on the image below)?
The idea, basically, is to adjust the height of the panel to the number of files in the portfolio.
Alternatively, is there a way to embed a directive to open by default the Layout pane instead of the Files pane?
Thank you all in advance for assistance!

You can control it at initial view time, but not dynamically. Once its displayed it's user-controlled.
AFAIK, you can't open it into Layout mode.

Is it possible to control the naming convention used by Aperture when importing photos? If so, how

When I import photos from my camera, I have them placed into projects based on the date the photos were taken. However, I do not like the naming convention used by Aperture as it causes the projects to sort into a non-chronologial order. The convention is MMM-DD-YYYY and I want to change it to YYYY-MM-DD. Is it possible in Aperture 3.2.4 to do this?

In the Import panel you can edit the preset for the file name format to "Image year - image month - image day - index" for example; the preset for folder names seems to be gone in Aperture 3,3 - at least I cannot find it any longer. You only seem to be able to enter the folder name manually in the Import panel.

Is it possible to control the visibility of an annotation?

I would like to turn on and off an annotation, such as an oval:
oval1.hidden = true;
Is that possible?
TIA,
-RFH

I have set the opacity to 0, that way the information shows on roll over, which is what we wanted.

Is it possible to control the zoom percentage in FCE?

I've got some interview clips where I'm too far away from the subject, and I'd like to reframe and tighten the shot while editing. Is this done using zoom? On my 3.5 FCE the zoom drop down has fixed selections (50%, 100%, 200%, etc) and no obvious way to set it for a particular size, like 75%.
Also, when I zoom into a clip and then drag the resulting clip onto the timeline, the result is that the timeline has an image that has returned to the same size as the raw file -- not resized as seen in the viewer. What am I doing wrong (or not doing)?
Thanks

Hi - the drop down menu you are using is not adjusting the size of the clip, it is adjusting the size of the +display in the canvas or viewer window.+
To actually zoom in on the clip itself, you need to edit it to the clip to the timeline.
Then double-click on the clip so that the timeline clip loads into the viewer.
In the Viewer, click on the motion tab.
Adjust the Scale control to zoom in or out of the clip.
Now you have actually adjusted the scale of the clip. Depending on the power of your computer and the material you are working with, when you make that adjustment you may need to render the clip to see it play back smoothly.
Hope this helps.

Is it possible to control the rate of fading in transitions?

Hi,
I've tried searching but can't come across anything specific to the actual rate of fading and changing it.
I have two clips that I want to change between. From the first clip, I want to gradually fade-to-black over a time of maybe 3 seconds. BUT, for effect in bringing in the second clip, I want it to fade-in-from-black much quicker in a time of maybe 0.2seconds.
Anyone any idea how to achieve this? All I seem to be able to do is change the length of transition that determines the rate of fading, but it's equal at fading out and in, I can't find how to change the fade out and fade in rates so they are independent of each other?
Thanks,
Crispy

Crispy,
To do that will require two transiitions and a clip of black.
The first transition is from clip A to the clip of black. The second transiiton from the black clip to your clip B.
To create a black clip you can use Centered Title without any text.
Matt

Is it possible to control the number of elements read from queue

The data write into the queue follows the format of
(Data Length) + Data Block + (Data Length) + Data Block + (Data Length) + Data Block
When I read the data, need to read the Data Length first, then can read one Data Block.
Is there any function in queue to do it?
Thanks
Solved!
Go to Solution.

Hi turbot,
"Is there any function in queue to do it?"
No, but there is the FOR loop to fetch datalength elements from the queue.
Or use the "flush queue" command the empty the queue - but you have to parse the element array afterwards...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Is it possible to control the cursor of a XY-graph via Keyboard and read the y value of the curser x-position?

Similar Messages

Maybe you are looking for