Is it possible to control the rate of fading in transitions?

Hi,
I've tried searching but can't come across anything specific to the actual rate of fading and changing it.
I have two clips that I want to change between. From the first clip, I want to gradually fade-to-black over a time of maybe 3 seconds. BUT, for effect in bringing in the second clip, I want it to fade-in-from-black much quicker in a time of maybe 0.2seconds.
Anyone any idea how to achieve this? All I seem to be able to do is change the length of transition that determines the rate of fading, but it's equal at fading out and in, I can't find how to change the fade out and fade in rates so they are independent of each other?
Thanks,
Crispy

Crispy,
To do that will require two transiitions and a clip of black.
The first transition is from clip A to the clip of black.  The second transiiton from the black clip to your clip B.
To create a black clip you can use Centered Title without any text.
Matt

Similar Messages

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • Is it possible to control the duration of a video clip in IMovie? Speed

    Is it possible to control the duration of a video clip in IMovie? Speed
    it up/slow it down?

    I actually think the content gets smoother in faster mode. But maybe that's just my opinion.
    By the way, the fast/slow/reverse effect is pretty sensitive, i use it for my fight scenes in movies and I can only raise the bar one notch faster before it starts to look cheesy.

  • Is it possible to control the parallel port with Lookout 5.0

    I want a simple demo setup on a PC, so I can control the 8 data bits of the parallel port. Example, to use START p/b that would toggle bit 0 and data returned on bit 1.

    It is possible to send bytes to the parallel port using the ASCII object within Lookout. However, it is presently not possible to control the state of the individual bits on the parallel port with Lookout.
    If you need to control the individual bits on a parallel port, consider using LabVIEW. It is much more powerful when programming serial and parallel ports.

  • Is it possible to controll the positioning of a new window when someone clicks  one of my links

    I was wondering if it was possible to control the positoning of a new window that pops up  when someone clicks one of my site document links on my dreamweaver site. When a link is clicked and the new window pops up, I'd like to control the window size and positioning of the new window. Is this possible without having to use a tooltip or other option?

    Some browsers will display pop-up windows in the parent window, some will open them in a new tab or new window.  I'm afraid there is nothing you can do about end user settings.
    Creating link to open in a Pop-Up window using DW and the Behaviors Panel
    http://www.cbtcafe.com/dreamweaver/popup_text/index.html
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • Is it possible to control the order that text flows appear when using them as text insets?

    I want to create multiple flows in a FrameMaker file which I can then insert as text insets. I would like to choose the inset using the Body Page Flow: dropdown list. However, there seems to be no order, alphabetical or otherwise, in which these flow appear in the drop down list. Is it possible to control this order, or is there a particular reason it appears the way it does?
    Cheers,

    IIRC, the flows are displayed in the order that they were created.

  • Is it possible to control the cursor of a XY-graph via Keyboard and read the y value of the curser x-position?

    I have following problem when I control the cursor via an attribute note, it is neccersary to free the cursor, but then it is not possible to read the y-Value of the cursor position. I want to control the cursor via keyboard and buttons, but with the funtionality of attribute setting "cursor fixed to plot".

    You know the X position so just read the Y value by reading it straight from the Y array instead of from a property node...
    Alternatively unlock the cursor if the position control has changed...and lock it again if it is constant for n milliseconds; to produce the Y value from the Y property.
    MTO

  • Is it possible to control the height of the Portfolio panel via the PDF Portfolio itself?

    Hi All,
    Is it possible to embed into a PDF Portfolio kind of a directive to Adobe Acrobat Reader what should be the height of the Portfolio panel (red line on the image below)?
    The idea, basically, is to adjust the height of the panel to the number of files in the portfolio.
    Alternatively, is there a way to embed a directive to open by default the Layout pane instead of the Files pane?
    Thank you all in advance for assistance!

    You can control it at initial view time, but not dynamically.  Once its displayed it's user-controlled.
    AFAIK, you can't open it into Layout mode.

  • Is it possible to control the naming convention used by Aperture when importing photos?  If so, how

    When I import photos from my camera, I have them placed into projects based on the date the photos were taken. However, I do not like the naming convention used by Aperture as it causes the projects to sort into a non-chronologial order. The convention is MMM-DD-YYYY and I want to change it to YYYY-MM-DD. Is it possible in Aperture 3.2.4 to do this?

    In the Import  panel you can edit the preset for the file name format to "Image year - image month - image day - index" for example; the preset for folder names seems to be gone in Aperture 3,3 - at least I cannot find it any longer. You only seem to be able to enter the folder name manually in the Import panel.

  • Is it possible to control the visibility of an annotation?

    I would like to turn on and off an annotation, such as an oval:
    oval1.hidden = true;
    Is that possible?
    TIA,
    -RFH

    I have set the opacity to 0, that way the information shows on roll over, which is what we wanted.

  • Is it possible to control the zoom percentage in FCE?

    I've got some interview clips where I'm too far away from the subject, and I'd like to reframe and tighten the shot while editing. Is this done using zoom? On my 3.5 FCE the zoom drop down has fixed selections (50%, 100%, 200%, etc) and no obvious way to set it for a particular size, like 75%.
    Also, when I zoom into a clip and then drag the resulting clip onto the timeline, the result is that the timeline has an image that has returned to the same size as the raw file -- not resized as seen in the viewer. What am I doing wrong (or not doing)?
    Thanks

    Hi - the drop down menu you are using is not adjusting the size of the clip, it is adjusting the size of the +display in the canvas or viewer window.+
    To actually zoom in on the clip itself, you need to edit it to the clip to the timeline.
    Then double-click on the clip so that the timeline clip loads into the viewer.
    In the Viewer, click on the motion tab.
    Adjust the Scale control to zoom in or out of the clip.
    Now you have actually adjusted the scale of the clip. Depending on the power of your computer and the material you are working with, when you make that adjustment you may need to render the clip to see it play back smoothly.
    Hope this helps.

  • Is it possible to control the number of elements read from queue

    The data write into the queue follows the format of
    (Data Length) + Data Block + (Data Length) + Data Block + (Data Length) + Data Block
    When I read the data, need to read the Data Length first, then can read one Data Block.
    Is there any function  in queue to do it?
    Thanks
    Solved!
    Go to Solution.

    Hi turbot,
    "Is there any function  in queue to do it?"
    No, but there is the FOR loop to fetch datalength elements from the queue.
    Or use the "flush queue" command the empty the queue - but you have to parse the element array afterwards...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • How do I control the sampling rate of a PCI-6602 counter

    Labview version: 7.1
    Processor: Pentium 4 1.8 GHz
    Hello All,
    I have two avalanche photo diodes connected to two counter entrances on a 6602 (ctr 0 and ctr 1).
    As can be seen in the attached VI, I'm generating a signal on ctr2 and using that as an external clock for the counters.
    My objective is to accurately read the counter values at a rate of ~100KHz (i.e. 0.01 ms between measurements) and to be able to control the rate via the front panel. This should be possible (80MHz timebase), however when I run the program it is only able to actually sample at ~5 ms intervals. Also I'm encountering error 200141 even though I set the rate in the counter to 1M, which should buffer enough.
    What am I doing wrong? Any help would be greatly appreciated.
    Thanks a lot,
    Attachments:
    FRET_ver_14.vi ‏456 KB

    Hello Aadam,
    After looking at your code, I would not use the DAQ assistants to implement this. The DAQ assistant are best to be used for simple acquistion and since you are looking to use more lower level properties of you card, I would suggest to move to use the lower level VIs. It will be easier to understand where the problem is occurring at and will run better than using the DAQ assistant.
    I have done some initial research for you to implement this design. I have described each of them below and how they will assist you.
    The first example I have found is the Change Counter Output Frequency While the Task is Running. In this example, it will show you how to change the frequency and duty cycle of a counter output frequency task. One thing to remember about these counters are that the frequency will not change until the period has finished. For example, if you changed the frequency in the middle of a period of frequency of 1 Hz, it has to complete the 1Hz period before changing it to the next frequency.
    The next example I would investgate is in the NI Example Finder called Correlated Dig Write With Counter.vi. The NI Example Finder can be found in Help » Find Examples... This VI will explain how to use the counter as a clock for another task. You will need to combine the concepts of the first example with this to make sure that you can vary the sample clock.
    Finally, in the NI Example Finder, there is an example how to count digital events with an external clock called Count Digital Events-Buffered-Continuous-Ext Clk.vi. With this example, I first suggest to add the counter task and make sure you can get the external clock to work. After this, I would then implement changing clock.
    Jim St
    National Instruments
    RF Product Support Engineer

  • File compression in Mavericks: can you control the compression rate?

    Hi all,
    Is there anyway a user can control the commpression rate in Mavericks. I previously used Stuffit Expander and the built in compression in Entourage 2008. As Mavericks has its own compression utility I cannot find where you can control the rate etc.
    I have removed Stuffit  Expander 2010.
    Regards
    Bob

    Not via the GUI. However, the Terminal command compress does have a compression ratio setting. Launch the Terminal app in /Utilities and type this into the window that pops up:
    man compress

  • Controlling frame rates of loaded movie clips

    Is it possible to control the playback rate of movie clips
    that are loaded with a Loader() call?

    …that which we call a rose by any other name would
    smell as sweet.
    With AS3 it seems that we shouldn't get as hung up on names
    as we have been in the past. From my brief experiments, I don't
    think it is that the loader is dynamically creating a movie, but
    that the timeline of the external clip is an instance of MovieClip.
    And it is "time-line" placed by definition. When I trace the
    this.name from my external movie it traces "root1" by itself, but
    when loaded into something else it gets that "instance" name.
    You can name your loader and just access its content property
    (cast as a MovieClip).

Maybe you are looking for

  • How many curves can be plot on one 2D graph in DIAdem

    Hi everyone, I want to  plot some(360+) curves on one 2D graph.I have results for samples which are measured at different temperatures.I had no problems to plot the curves of all devices for one temperature.But what I noticed when I tried to plot cur

  • How do I insert a Watermark?

    Hello, Have pages 08 3.0.2 How do I create a watermark on a page from, say, iPhoto or some other clipart, etc? Related to that... When converting Windows pages (.doc) to Pages that do have Watermarks, is there a way to have the watermarks be sized as

  • ICal not displaying events

    Hello I received several calendar invites from windows users. the file opens and displays normally in iCal 8.0, OS X 10.10.1, but does not show the event invites this has been a consistent issue since upgrading to yosemite. I have taken the ical file

  • Wrong BIOS in support page for Satellite A300D

    Hi all, half hour ago i was searching a driver for my a300d and i found a new bios version 2.80-win64 10/02/12 latest bios is 3.30 back in 2009 new versions are always with biggest numbers ..and never after almost 3 years i'm not stupid enough to try

  • Find Next Task ID

    Hi All, Here is a case: I have to notify a user througt email when his/her request is rejected by XYZ. I cannot use the email notification from adminui as the email content requires lots of data from process variables. So I am using EmailService to s