Is it possible to control the visibility of an annotation?

I would like to turn on and off an annotation, such as an oval:
oval1.hidden = true;
Is that possible?
TIA,
-RFH

I have set the opacity to 0, that way the information shows on roll over, which is what we wanted.

Similar Messages

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • Is it possible to control the duration of a video clip in IMovie? Speed

    Is it possible to control the duration of a video clip in IMovie? Speed
    it up/slow it down?

    I actually think the content gets smoother in faster mode. But maybe that's just my opinion.
    By the way, the fast/slow/reverse effect is pretty sensitive, i use it for my fight scenes in movies and I can only raise the bar one notch faster before it starts to look cheesy.

  • I have a plot with two cursors - how can I control the "visible" attribute of the second cursor?

    I have a waveform graph with multiple plots and two cursors. I can use the "cursor->visible" property to control cursor #1 but I cannot seem to find a way to control the visible attribute for cursor #2. Is there a way to do this?
    Thanks,
    RGA

    There's an "Active Cursor" property that allows you select which cursor the following actions operate on. Remember that property nodes "execute" from top to bottom...
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Is it possible to control the parallel port with Lookout 5.0

    I want a simple demo setup on a PC, so I can control the 8 data bits of the parallel port. Example, to use START p/b that would toggle bit 0 and data returned on bit 1.

    It is possible to send bytes to the parallel port using the ASCII object within Lookout. However, it is presently not possible to control the state of the individual bits on the parallel port with Lookout.
    If you need to control the individual bits on a parallel port, consider using LabVIEW. It is much more powerful when programming serial and parallel ports.

  • How to control the visibility of image items on a layer?

    I want to control the visibility of image items on the layer. Some items will be visible and others will be hidden on the same layer.
    Can anyone tell me how can I achieve this using SDK APIs.

    Hi,
    You can try following facade function. And set the Opacity value to 0 for hidden the images or set greater then 0 value for visiablity of image.
    IXPAttributeFacade::SetOpacity (const UIDList &itemList, PMReal opacity);
    I hope it will resolve your problem.
    Regards,
    Jitendra Kumar

  • Is it possible to controll the positioning of a new window when someone clicks  one of my links

    I was wondering if it was possible to control the positoning of a new window that pops up  when someone clicks one of my site document links on my dreamweaver site. When a link is clicked and the new window pops up, I'd like to control the window size and positioning of the new window. Is this possible without having to use a tooltip or other option?

    Some browsers will display pop-up windows in the parent window, some will open them in a new tab or new window.  I'm afraid there is nothing you can do about end user settings.
    Creating link to open in a Pop-Up window using DW and the Behaviors Panel
    http://www.cbtcafe.com/dreamweaver/popup_text/index.html
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • Control the visibility from multiples vi's

    I need to control the visibility ('visible' property) of 3 controls (one flag and two intergers) from multiples vi's. Does anybody have a pratical example how to do it?
    rgds,
    Haroldo - Brasil
    LV 7.0
    Solved!
    Go to Solution.

    Hi Haroldo,
    I would suggest to put this info into your signature, so you will never forget to mention this
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome
    Attachments:
    visible_LV70.vi ‏16 KB

  • Is it possible to control the order that text flows appear when using them as text insets?

    I want to create multiple flows in a FrameMaker file which I can then insert as text insets. I would like to choose the inset using the Body Page Flow: dropdown list. However, there seems to be no order, alphabetical or otherwise, in which these flow appear in the drop down list. Is it possible to control this order, or is there a particular reason it appears the way it does?
    Cheers,

    IIRC, the flows are displayed in the order that they were created.

  • Is it possible to control the cursor of a XY-graph via Keyboard and read the y value of the curser x-position?

    I have following problem when I control the cursor via an attribute note, it is neccersary to free the cursor, but then it is not possible to read the y-Value of the cursor position. I want to control the cursor via keyboard and buttons, but with the funtionality of attribute setting "cursor fixed to plot".

    You know the X position so just read the Y value by reading it straight from the Y array instead of from a property node...
    Alternatively unlock the cursor if the position control has changed...and lock it again if it is constant for n milliseconds; to produce the Y value from the Y property.
    MTO

  • Is it possible to change the visibility of a inputText in run-time?

    Supposed my jsp has a radio-group with two radio buttons called "visible" and "invisible" and an iputText component. What I want is: at the beginning the inputText is visible and enable. If I click the "invisible" this inputText will changed to invisible and disable. And if I click the "visible" this inputText can be seen and enable again.
    Can I do this with JSF or just with java script?

    To enlarge on what rlubke has been saying.
    <h:outputLabel rendered="#{! loginBean.loggingOut}"  style=" color:rgb(198,0,0);" value="#{i18nBean['USER.VMP010.ITEM6']}" styleClass="PageTitle"/>See how the rendered attribute is deriving it's value from a bound boolean expression. The expression "loginBean.loggingOut" evaluates to a method-call "loginBean.isLoggingOut()" which should return true or false. The "!" operator can be used in much the same way as you use it in Java.

  • How is it possible to output the contents of all annotations to file or text box?

    Hello,
    I am trying to get the contents of all annotations (except attachments) within a PDF. Creating the Javascript code to enumerate all annotations in the document is not a problem. I am puzzled as to how I can either save the output to a unicode text file (preferable to a filename picked by user) or place it in an on-screen textbox in a dialogue so the user can copy it to the clipboard. As far as I understand, it is possible to generate a new PDF with the output, but I would like the code to work in Adobe Reader also.
    Thanks a lot!
    Best regards,
    Stanislav

    Thanks for your reply, George!
    What I want to do is to be able to open any document in Reader, open the Addons pane, click a button and see the contents of all annotations in a textbox or pick a filename to save these to hard drive in a custom format? The latter (saving to a user-selected file) would be preferable.
    AcroJSGuide points to Adobe Dialog Manager as a way to create user dialogues, but I thought experienced users can point me in the right direction.
    Thanks,
    Stanislav

  • Is it possible to control the height of the Portfolio panel via the PDF Portfolio itself?

    Hi All,
    Is it possible to embed into a PDF Portfolio kind of a directive to Adobe Acrobat Reader what should be the height of the Portfolio panel (red line on the image below)?
    The idea, basically, is to adjust the height of the panel to the number of files in the portfolio.
    Alternatively, is there a way to embed a directive to open by default the Layout pane instead of the Files pane?
    Thank you all in advance for assistance!

    You can control it at initial view time, but not dynamically.  Once its displayed it's user-controlled.
    AFAIK, you can't open it into Layout mode.

  • Is it possible to control the naming convention used by Aperture when importing photos?  If so, how

    When I import photos from my camera, I have them placed into projects based on the date the photos were taken. However, I do not like the naming convention used by Aperture as it causes the projects to sort into a non-chronologial order. The convention is MMM-DD-YYYY and I want to change it to YYYY-MM-DD. Is it possible in Aperture 3.2.4 to do this?

    In the Import  panel you can edit the preset for the file name format to "Image year - image month - image day - index" for example; the preset for folder names seems to be gone in Aperture 3,3 - at least I cannot find it any longer. You only seem to be able to enter the folder name manually in the Import panel.

  • HCMPF - controlling the visibility of various sections of Form

    Hi All,
    In my HCM PF, i have 2 sections - 1) Employee 2) Manager
    Under Manager Section, there is a Mandatory text field 'Comment' , which should be 'Hidden' under Employee Section.
    In order to make this field mandatory, i have defined it as 'Required Entry' under  the Process Fields
    If the field is mandatory, it will result in an error while filling Employee section.
    I dont want the red border appearing around my comment field in my form, so i am not setting property as User Entered-Required in UI property.
    Can anyone please guide me how to proceed with this funcitonality. I want to keep the field hidden in Emp section, yet it should be mandatory under Manager section.
    Thanks in advance,
    Aditi

    Seriously? Those are some really basic HCM P&F concepts.
    I will try to help.
    First off....why do you have a separate field for "manager comments"? WHy not use the standard comments fields (current/previous) and let the framework handle them?
    Now for showing/hiding sections of form.....several ways to do this. If it were me...
    1. I would have the employee and manager steps in different form scenario steps/stages (personally I would probably have them in different form scenarios all toghether but sharing same form simply for scalability).
    2. Define the standard field for form_scenario_stage in your form scenario fields (look it up in documentation for how to define this....I'm not spoonfeeding you)
    3. Add the form field from #2 onto your form somewhere and make it hidden/invisible.
    4. Use Javascript/Formcalc to reference the "raw value" of that field. Then you can use script in the form to show/hide the section depending on the value in that field (which will be the name of the form scenario step/stage.
    Now.... for making fields mandatory, hidden/visible/invisible, open to edit/read only......that is all done in scripting and is VERY basic. There are TONS of examples on how to do this all over the web with simple Google searches.

Maybe you are looking for