Is it possible to conver Frame maker file into PS using FDK

Hi All ,
Just wanted to know quickly is there any popsibility to convert Framemaker files into PS (Post Script) using FDK script.
We have done successfully conversion of Framemaker to PDF using FDK script.
Similarly wanted to do conversion of Framemaker file to PS.
please let us know options /any link related to the same.
Software :: Framemaker 11
Best Regards
Ramesh babu katta

Just set your PDF printer instance to output to FILE: instead of the PDF port and you should be able to reuse your current PDF creation script.

Similar Messages

Live cycle ES2 can covert Frame maker file into PDF??

Hi All
good day!!
I have read that live cycle can covert farme maker files into pdf .
is it true . we are using live cycle ES2 and we are going to upgrade FM 8 (unix) to FM 11 .
can we convert frame maker files into pdf using Live cycle ES2????
you response highly appiciate!!
thank you
ramesh babu

Possibly, but ES2 is only specified to convert FM7.2 & FM8 files. FM11 might work, but you would have to test it and it's most likely not supported by Adobe in this mode. See: http://www.adobe.com/products/livecycle/pdfgenerator/formats.html
If you only need to create PDF output from existing FM files, then Datazone's DZbatcher or Omni Systems fmbatch (part of the mif2go product) utilities may suffice.

How to retrieve all external refereces in a frame maker file without conditional text of hidden

How to retrieve all external refereces in a frame maker file without conditional text of hidden

Hi, Finally I found the solution of the above problem. Use following interface-function combination. ///////////code start UIDList lst = Utils<IInCopyWorkFlowUtils>()->GetInCopyStories(doc); for(int32 index = 0;index < lst.Length();index++) { UIDRef incopyStory = Utils<IInCopyWorkFlowUtils>()->GetContainingInCopyStory(lst.GetRef(index)); if(incopyStory == UIDRef::gNull) { break; } IDataLink * dLink = Utils<IInCopyBridgeUtils>()->QueryDataLink(incopyStory); if(dLink == nil) { break; } } //////code end

Would Doclet API helps while converting frame maker files to pdf files

Through Doclet API, can we convert frame maker (.fm) files to the PDF files ?
I have requirement that I need to convert bulk of frame maker files to the pdf files actually, while googling I came to know that Doclet may support.
If anyone has worked on this type of project, please help me.
Thanks a lot.

Someswara wrote:
Through Doclet API, can we convert frame maker (.fm) files to the PDF files ?No.
Someswara wrote:
I have requirement that I need to convert bulk of frame maker files to the pdf files actually, while googling I came to know that Doclet may support.There is a doclet (called [MIF doclet|http://java.sun.com/j2se/javadoc/mifdoclet/]) that can produce .fm files from Java source files, if a you have fmbatch installed. To produce PDF file using MIF doclet or from *fm files you still need Adobe FrameMaker.

Is It Possible to store an entire file in database using java?

Hi All,
I am new to Programming. please help he out Is It Possible to store an entire file in database using java? is possible, can u tell me the way to make this success? Thank you in advance.

Thanks PhHein
i got that application. i stored one file in db, and i displayed that in browser. thank u very much.

Is it possible to load a xdp file into a subform?

Is it possible to load a xdp file into a subform?

That worked with an existing fragment.
What i'm tryin to do is generate a xdp file like (which i can open in the designer as preview pdf correctly), and insert this as subform.
<?xml version="1.0" encoding="UTF-8"?>
<xfa>
 <template xmlns="http://www.xfa.org/schema/xfa-template/2.8/">
 <subform name="TopmostSubform">
 <pageSet name="PageSet">
 <pageArea name="MasterPage1" id="p1">
 <contentArea name="ContentArea" x="0pt" y="0pt" w="595.3pt" h="841.9pt"/>
 <medium stock="a4" short="595.3pt" long="841.9pt" orientation="portrait" imagingBBox="none"/>
 </pageArea>
 <pageArea name="MasterPage2" id="p2">
 <contentArea name="ContentArea" x="0pt" y="0pt" w="595.3pt" h="841.9pt"/>
 <medium stock="a4" short="595.3pt" long="841.9pt" orientation="portrait" imagingBBox="none"/>
 </pageArea>
 </pageSet>
 <subform name="Page1" w="595.3pt" h="841.9pt">
 <draw name="Text" x="59.25pt" y="117pt" minW="400.25pt" minH="12pt">
 <ui>
 <textEdit multiLine="1"/>
 </ui>
 <value>
 <exData contentType="text/html">
 <body xmlns="http://www.w3.org/1999/xhtml" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">Assunto: Apólice nº #MC_Apolice_MC# - Actualização de Condições 2012/2013</body>
 </exData>
 </value>
 <para/>
 </draw>
 <draw name="Text" x="59.25pt" y="141pt" minW="88.25pt" minH="12pt">
 <ui>
 <textEdit multiLine="1"/>
 </ui>
 <value>
 <exData contentType="text/html">
 <body xmlns="http://www.w3.org/1999/xhtml" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">Estimado Cliente,</body>
 </exData>
 </value>
 <para/>
 </draw>
 <draw name="Text" x="59.25pt" y="165.75pt" w="490.25pt" minH="24pt">
 <ui>
 <textEdit multiLine="1"/>
 </ui>
 <value>
 <exData contentType="text/html">
 <body xmlns="http://www.w3.org/1999/xhtml" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">Aproximando-se a data de renovação do seu seguro de saúde Multicare, vimos informá-lo das alterações que ocorrerão na sua apólice a partir de #MC_Dt.Inicio_MC#.</body>
 </exData>
 </value>
 <para/>
 </draw>
 <draw name="Text" x="59.25pt" y="201.75pt" minW="155pt" minH="12pt">
 <ui>
 <textEdit multiLine="1"/>
 </ui>
 <value>
 <exData contentType="text/html">
 <body xmlns="http://www.w3.org/1999/xhtml" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">Refor&#xe7 ;ámos a sua proteção</body>
 </exData>
 </value>
 <para/>
 </draw>
 </subform>
 </subform>
 </template>
</xfa>

Is it possible to upload a xls file into an application and store in table.

Hello,
I just want to know whether its possible to upload a xls file into application in Oracle 10g .
i.e. have a separate xls file stored in computer then in the application just have a browse button to upload that xls file and that data should be inserted into a new table.
Thanks

Good morning,
You can upload the .XLS file into a BLOB field in a table and then download that back to the local PC. Look in the APEX Advanced Tutorial for "Create an Upload Item", Page 9-3 (PDF Page: 109). There it will explain how to upload to a BLOB and then how to download that again.
Don.
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone! :)

AppleScript error on Tiger only: "can't make file into type alias"

Hi,
I'm successfully using this smart TextWrangler applescript from this webpage for opening files on the same folder as the current document:
http://blog.ampli.fi/textwrangler-open-file-from-directory-of-current-file/
It works fine on Mountain Lion.
However, when I try it on Tiger 10.4.11, this error dialog appears: "TextWrangler got an error: Can't make [file] into type alias".
The script basically gets the path of the current document in TextWrangler and posts a file chooser on such path.
I guess these are the lines that Tiger doesn't like:
set current_path to POSIX path of current_file
set new_file to choose file default location (current_path) with multiple selections allowed
open new_file
After googling for the error "can't make [] into type alias", I tried to change such lines to:
set current_path to (POSIX path of (current_file as alias))
set new_file to choose file default location (current_path) with multiple selections allowed
open new_file
But, however, the same error remains.
Do you have any idea on how could this work?
Thanks!

wow, 10.4...
try this:
set current_path to current_file
set new_file to choose file default location (current_path) with multiple selections allowed
open new_file
I'm not certain when the standard applescript dialogs were updated to accept posix paths, but it may have been 10.5.

Setting Font for converting multiple text files into PDF using VB 6.0

Dear All,
Am converting multiple text files into PDF using VB6.0. Currently, am unable to control the font face and size for the generated files. Below is the procedure am using for each file;
Public Sub proc_convert_to_PDF(srcFilename As String, destFilename As String)
Dim p_AcroApp As CAcroApp
Dim p_VDoc As CAcroAVDoc
Dim p_DDoc As CAcroPDDoc
Dim IsOk As Boolean
Set p_AcroApp = CreateObject("AcroExch.App")
Set p_VDoc = CreateObject("AcroExch.AVDoc")
Call p_VDoc.Open(srcFilename, "")
Set p_VDoc = p_AcroApp.GetActiveDoc
If p_VDoc.IsValid Then
Set p_DDoc = p_VDoc.GetPDDoc
' Fill in pdf properties.
p_DDoc.SetInfo "Title", Format(Date, "dd-mm-yyy")
p_DDoc.SetInfo "Subject", srcFilename
If p_DDoc.Save(1 Or 4 Or 32, destFilename) <> True Then
MsgBox "Failed to save " & srcFilename
End If
p_DDoc.Close
End If
'Close the PDF
p_VDoc.Close True
p_AcroApp.Exit
'Clear Variables
Set p_DDoc = Nothing
Set p_VDoc = Nothing
Set p_AcroApp = Nothing
End Sub
What I need;
1) to be able to set the font face of the destination file ( destFilename)
2) to be able to set the font size of the destination file ( destFilename)
Am using Adobe Acrobat 7.0 Type Library
Kindly Help.
Thanks in advance

We didn't say it doesn't work. We said it isn't supported.
There are a number of other ways to make a PDF. The one which would
give the most control is if your application directly printed to GDI,
controlling the font directly. This could print to Adobe PDF.
You could look for an application that gives control of font for
printing.
You could use a text-to-PostScript system and distill the result. You
could even look for a non-Adobe text-to-PDF.
Working in the unsupported and dangerous world you chose, the font
size for text conversion is set (and this is very bad design from
Adobe) in the settings for Create PDF > From Web Page. There is no API
to this.
Aandi Inston

How to upload a file into server using j2ee jsp and servlet with bean?

How to upload a file into server using j2ee jsp and servlet with bean? Please give me the reference or url about how to do that. If related to struts is more suitable.
Anyone help me please!

u don't need j2ee and struts to do file uploading. An example is as such
in JSP. u use the <input> file tag like
<input type="file"....>You need a bean to capture the file contents like
class FileUploadObj {
 private FormFile srcFile;
 private byte[] fileContent;
 // all the getter and setter methods
}Then in the servlet, you process the file for uploading
 * The following loads the uploaded binary data into a byte Array.
 FileUploadObj form = new FileUploadObj();
 byte[] byteArr = null;
 if (form.signFile != null) {
 int filesize = form.srcFile.getFileSize();
 byteArr = new byte[filesize];
 ByteArrayInputStream bytein = new ByteArrayInputStream (form.srcFile.getFileData());
 bytein.read(byteArr);
 bytein.close();
 form.setFileContent(byteArr);
 // Write file content using Writer class into the destination file in the server.
 ...

Convert XML file into DTD using Java

Hi All,
I want to do convert the xml file into DTD using Java.
I read the DOM package but didnt get clear idea.
Anyone of you have an idea please share the coding with me.
Any suggestions greatly appreciated.
Thanks
Veera

Hi All,
I want to do convert the xml file into DTD using Java.
I read the DOM package but didnt get clear idea.
Anyone of you have an idea please share the coding with me.
Any suggestions greatly appreciated.
Thanks
Veera

Moving files into directory using shell script

Can someone tell me how I move files into directory using *nix/linux shell script?
I have files which created from stored procedures using utl_file. The files name for example:
DKH_104_12345
DKE_101_42324242
DKH_102_32432
DKE_101_34553
Then I create directories automatically for example:
/oradata/apps/dmp/output/101
/oradata/apps/dmp/output/102
/oradata/apps/dmp/output/103
/oradata/apps/dmp/output/104
Using this procedure :
CREATE OR REPLACE PROCEDURE Xorganize AS
v_item VARCHAR2(5);
v_DirName VARCHAR2(50);
v_FileName VARCHAR2(50):='xorganize';
v_FileExt VARCHAR2(5):='.sh';
v_ID UTL_FILE.file_type;
CURSOR res IS
--find the directory name from table
SELECT brn_cde FROM vcr_brn_cde ORDER BY 1;
BEGIN
--used by utl.file funtion
SELECT PRD_DIR INTO v_DirName
FROM CR_SYS_PRM
WHERE CLT_CDE ='FIF';
SELECT v_FileName||v_FileExt INTO v_FileName FROM dual;
v_ID:=UTL_FILE.FOPEN(v_DirName,v_FileName, 'w');
utl_file.PUTF(v_ID,'%s\n','@@echo OFF');
utl_file.PUTF(v_ID,'%s\n','cls');
utl_file.PUTF(v_ID,'%s\n','echo Reorganizing ...');
OPEN res;
     LOOP
          FETCH res INTO v_item;
          EXIT WHEN res%NOTFOUND;
          utl_file.PUTF(v_ID,'%s\n','mkdir '||v_item);
     END LOOP;
CLOSE res;
OPEN res;
     LOOP
          FETCH res INTO v_item;
          EXIT WHEN res%NOTFOUND;
          utl_file.PUTF(v_ID,'%s\n','move _'||v_item||'_.* '||v_item||'\');
     END LOOP;
CLOSE res;
utl_file.PUTF(v_ID,'%s\n','FOR /F "usebackq delims=" %%1 IN (`dir /b *.`) DO @rd/q %%1');
utl_file.PUTF(v_ID,'%s\n','cls');
utl_file.PUTF(v_ID,'%s\n','echo Reorganizing ...Done');
utl_file.fclose(v_ID);
END;
Everything works fine, BUT, the script is generated in dos/windows scripting.
Now I need to run the script in *nix/linux shell, which I still can’t do it (because of my knowledge :p).
And also I don’t know if the script already generated in *nix/linux shell version, how do I chmod +x the script from stored procedure, I can’t use ‘host’ command in my tools
Thanks a lot
-firman

If you're using 9i then UTL_FILE.FRENAME() will execute something like a Unix mv command.
If you want to do a chmod then you'll need to check out how to use a Java Stored Procedure to execute OS calls.
Cheers, APC

Is it possible to Load External SWF files into Flex Mobile projects?

Hi Guys,
I'm trying to load an external asset in this cse (a SWF file) into my flex project (Apple IOS IPAD), don't get any luck. Can any one suggest a solution ?

In Apple's words, "No interpreted code may be downloaded or used in an Application except for code that is interpreted and run by Apple's Documented APIs and built-in interpreter(s)".
Hence external swfs cannot be loaded in iOS.

Is it possible to import a .idea file into Illustrator CS3?

I have sketches and files on Adobe Idea on the iPad. How to I bring them into Illustrator and preserve the layers, etc? .png, .pdf and .jpg don't seem to do this. I'm sorry if this is a "no duh" question, but I am just starting out with these programs and would appreciate the help. The question didn't turn up in a forum search.
Thank you in advance!
~Anna

Mr. Zimmerman,
Thank you for taking up six post spaces on this forum question. Obviously I haven't read any of the app information, or subscribed to the adobe cloud, or searched the forums, despite having used those to discover this problem. Perhaps I should have underlined the program name that I mentioned in my original post, and the file formats I listed, which are only available if downloaded from the cloud, so that you could have more easily understood my question. I should have included Google link for the application so you wouldn't have to waste time looking it up for yourself. Maybe I should have mentioned that I called support and they suggested that I post in the forums to see if anyone else had gotten around the problem.
Also, sadly, the link doesn't answer my question. You seem to think that I am simply trying to export files. I have demonstrated in my original question and my reply to a previous answer, that I have already exported in every file available for use with the app and the cloud. I was asking, since I need to clarify, why .idea files would not open in Illustrator CS3, and why, when other file formats were tried, did they not preserve the layers. Also, since they wouldn't, was there another way to export besides the -listed- export file formats that would allow layers. And, as before when I tried a search in the Adobe Ideas forum, there was no answer to how to open an idea file in CS3, or preserve the layers in CS3 in any of the other file formats offered.
I am sorry that you misunderstood my question.
Have a lovely day!
~Anna

Is it possible to import an avi file into iTunes?

I am trying to import in a TV show that i have downloaded as an avi file into iTunes. However when i try to import it nothing happens, if i try and change the file format into a mp4 it wont recognize it. Does anyone have any ideas?
I can not find it in any other file format anywhere online.
Any help would be appreciated.
Thank you

Export the OMF from an audio app like ProTools or Logic as a stereo pair AIFF, then use that with your video. Chop it up if you need to checkerboard.
Of course this will only work if the audio is very simple - overlapping audio will mess you up. If you can figure out the audio app part, you can split up your OMF into separate tracks.
But then if you can't get it into an audio app, you're a bit hosed.

Is it possible to conver Frame maker file into PS using FDK

Similar Messages

Maybe you are looking for