Is it possible to convert a project in SD to a project in HD

I finally made the leap from PP 2.0 to PP 5.5.  I have a few projects that where shot in HDV, but downconverted to SD to be able to edit in PP 2.0.  Now that I have PP 5.5 is there anyway to take the original project that was done in SD and unlink the media and recapture all the video in HDV thus having all the media relink but in HDV so I don't have to edit the project from scratch?  Anyone have any luck doing something like this?  It would be a real timesaver.

I'm sure someone with more experiance with PPCS5.5 will be able to give you some other advice, but I'd like to share mine. There is software called Magic Bullet Instant HD V1.2. It does a very good job of taking SD files and giving you a better final image than the SD file. You are able to set many different sizes and resolutions. I had about 50 hours of SD video and it was worth it to me to be able to view them in higher quality. You can download a trial version of the software to see if you like it.

Similar Messages

  • Is it possible to convert 2013 Project Professional trial version to Standard full version?

    I am closing in on the end of my trial period for Project 2013. I have found that i do not need the Professional version and have therefore purchased a full retail copy of Standard. Is there a way to convert the Prof trial version to Standard, or do i
    simply need to uninstall Prof, and install Std from scratch? thx mm

    You're more than welcome!
    Check also this link that is a bit more detailed:
    http://technet.microsoft.com/en-us/library/cc750929.aspx
    If the reply answers your question, please mark it as an answer so we can close the thread! 
    Thanks!
    Guillaume Rouyre - MBA, MCP, MCTS

  • Is it possible to convert Flex3 projects directly to Flash Builder 4?If so how?

    Hello Madam/Sir,
         I have a Flex3 project which was running successfully. Now i need to run it using Flash Builder4. So is there any way by which we can run the same project directly in Flash Builder4 without any manual changes to be done in the code. Please reply as soon as possible.
    Thank you.

    http://www.adobe.com/devnet/flex/articles/flexbuilder3_to_flashbuilder4.html
    Jason San Jose
    Software Engineer, Flash Builder

  • Is it possible to convert an app from 12c to 11g?

    I am using both 11.1.2.4 and 12.1.2.0.
    If I have an app built with 12.1.2.0, which does not include any 12c specific features, is it possible to convert it to 11.1.2.4?
    I am asking because I have a Development environment that is 12c, but a Production environment that is 11g and I am not sure we will be able to upgrade the Production environment
    Thanks in advance..

    It's possible but not an easy task. As 12c uses newer stuff you have to test everything with great care. You might find some things you have to rebuild add they won't work in 11.1.2.4.0 (e.g. components which are only available in 12c. If you read the what's new doc for 12c and you find something you have used, prepare to rebuild this part.
    First thing to try ids to open the project in 11.1.2.4.0 and see if you can compile and run the app.
    Timo

  • Convert motion project into title template

    I started working on a motion project, not sure what template to use, so I created a standard motion project.  After working on the project for about 20 hours, I am now realizing that the title template would probably be the best option for this project even though I am not doing any actual titles.  I was able to convert the project to a video effect template, but this is not really what I want.  Is there some way to convert this project to a title template?  Even if I have to copy/paste everything over to a new project, that would be a lot better than redoing the 20 hours that I've already spent on this thing.  Since I can only have one project open at a time, I don't think copy/paste is even possible.

    I think this will work for you.
    -Select all the groups in your Motion project (or nest them in a single group.
    -Drag the group(s) to the Library>Favorites.
    -Create a new Final Cut title project with the same settings.
    -Drag and Drop the group(s) from the Library>Favorites into the new Final Cut Title project.
    Save and enjoy. 

  • Is it possible to convert HTML to XML in as2?

    Hi,
    I am trying to develop a stock widget to use in my mobile using flashlite 2.x.
    I have chosen "http://charting.nasdaq.com" to obtain 5days chart /6months chart..
    But I am not able to use XML object for this and parse.. The values are in table format.. So I have to use LoadVars.. but writing a AS2 code
    to obtain values like High/Low price of the stock or volume is very lengthy since the data obtained are not in XML format..
    i tried this
    var example_xml:LoadVars = new LoadVars();
    example.ignoreWhite = true;
    example_xml.load("http://charting.nasdaq.com/ext/charts.dll?2-1-14-0-0-75-03NA000000www-&SF:4|5-WD=539-HT=39 5--XTBL-");
    example_xml.onLoad = function(success) {
         if (success == true) {
              trace(example_xml);
    Is it possible to convert them to xml and use relevent methods or xml properties?
    If I use example_xml:XML = new XML() then tracing example_xml (as above) doesn't give any data
    Any help?

    I had a project a few years ago where I converted 10s of thousands of TestStand HTML files from TS 1.0 and 3.0.
    Most of what I did is specific to our internal data structures, but I'll try to help get you started.
    The general idea is to pick out the report header and data sections from each file, then eliminate the HTML formatting.
    The attached file will extract the Report Header and data sections.
    To use this, you will need to download this additional VI that I posted here in the regex board a few years ago.
    http://forums.ni.com/t5/BreakPoint/Regular-Expressions-Board/m-p/1269088#M14343
    Here is one more file that will parse out each data record and dtermine it's Name, status, type value, limits and duration/timestamp info
    Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
    If you don't hate time zones, you're not a real programmer.
    "You are what you don't automate"
    Inplaceness is synonymous with insidiousness
    Attachments:
    Parse TestStand HTML.vi ‏42 KB
    Parse TestStand HTML Data Section.vi ‏55 KB

  • Is possible to convert a Real Player Movie to Quiketime or better yet, DVD?

    I have a great shot of my wedding that I would like to cut and paste into my DVD project but it is in Real Player format. Is it possible to convert it into a format that I can use with iDVD?

    I got hitched in Vegas at the Viva Las Vegas Wedding Chaple and they recorded a dvd and they brodcasted it on line live using Real Player... Long story short I have 2 views of my wedding (1 on DVD and another from another angle in Real Player) and I'd like to combine them (edit them) into one. So if anyone has any other ideas that I should look into please let me know.
    Thanks.

  • Converting CS3 projects to CS2

    I just purchased Creating Motion Graphics with After Effects by Trish & Chris Meyer, the 4th edition. All of the projects on the DVD that comes with the book were created with AE CS3. Is there a way to convert a CS3 project so that I can open it in CS2?
    I do have a friend who has CS3. Is it possible to open the projects in CS3 and somehow save them as a CS2 project that way? Thanks everyone,
    Lee

    No. CS3 projects cannot be opened in prior versions. A trial version of CS3 is included on the CMG disk. Otherwise, your only other recourse is to upgrade AE, sorry.

  • Is it possible to convert a Mac (Pages) document to Microsoft Works

    I was wandering if it's possible to convert a Mac (Pages) document to Microsoft Works? Our main computer that we use is our Mac Desktop Computer but I have an HP laptop (which I'm about to throw out the window) that I sometimes use when I'm working on a project and I get tired of sitting in front of the desktop. My HP laptop has Microsoft works. If converting from Pages to Microsoft Works is possible please let me know how this can be done?

    File > Export
    Type Export into the help search field and it will highlight the menu for you.
    This works for other menu options too.
    Jerry

  • Down convert a project.

    I up converted a cc project to 2014 version and it has never worked properly, continuos freezing and crashing, is it possible to down convert the project  so I can work in a more stable software?

    Thanks for the response everyone.
      I had managed to stumble on editing in the 2014 project version for two days, so the option of going back to the cc project version was not an option (I did test the xml idea, and yes, only the basic edit re-links.)
    The project has now finished finally, but during all the problems we tried many software/ hardware troubleshooting options - new user, more memory, opening project in another 2014 project, cleaning the cache, affecting the library, un-install-re install, and Adobe took control of the computer twice!
        We can only assume the problem derived from up-converting the project to the new 2014 software as every other option was evaluated.

  • Is it possible to convert text captions to Smart Shapes?

    Hello,
    I have a collegue that is using Cp 5 to record software simulations which then need to be brought into Cp6. The problem is that our standards (for software simulations) employ Smart Shape call outs (not the Cp 5.5 and earlier text captions).
    Is it possible to convert these text captions into our themed Smart Shapes either automatically inside Captivate 6 or by modifying the content within the CPTx file?
    Thank you,
    Shawn

    Hello Lilybiri,
    As always you are awesome! :-)
    >I don't believe an automatic switch will be possible, because smart shapes are totally different objects.
    I understand because there are a huge variety of shapes in either format. But I suspect that it should be easy to convert a text caption from any style to one specified smart shape style.
    Actually, I am asking before the simulations get started. So nothing has been done yet. I am unsure what you are suggesting I should do in the preferences under Cp 5.5. Are you suggesting that there is a way to convert 'some format' of text callouts, in a Cp5.5 demonstration simulation, to Smart Shapes in Cp6?
    >but since you already have created the simulations, it has to be done manually. Hoping for you that
    >someone has a bright idea, but I do not see one immediately.
    For anyone else in this situation, it would be handy to have a solution (rather than painstakingly convert each manually).
    I am wondering if this might be a relatively easy search/replace within one of the xml files within the CPTx file. I'm going to look at this tonight.
    Thanks for your assist.

  • Is it possible to convert PDF file into HTML

    Dear friends
    Is it possible to convert PDF file into HTML. I have few hundread PDF files i like to convert this files into HTML. I hope it can be done through Java but i don't know how to start this coding. anybody can give me a brief idea to go ahead.

    Why do you want to do this yourself? I quick search on Google showed several utilities to do this, some freeware, some commercial.

  • Is it possible to convert to an AIFF file in itunes 10 and beyond, and if so what is the procedure?

    Hello.  Is it possible to convert to an AIFF file in itunes 10 and beyond, and if so what is the procedure? 
    I use FCP7 and often have a sound loop or the like that I need in AIFF format, I normally use itunes to do the conversion, but have heard that version 10 no longer performs this task...?
    Thx for the help!
    MBP 2.6 GHz Intel Core 2 Duo - Mac OS X 10.6.7 - itunes 9.2.1 (5)

    Doolittle wrote:
    I can't find convert to aiff as an option in itunes 10.
    It still works the same as in past releases.  Go to Edit > Preferences > Import Settings, and set "Import Using" to "AIFF Encoder," and then the option will be available.  Consult this document for details: 
    http://support.apple.com/kb/HT1550

  • Is it possible to convert *.doc to *.rtf in a java program?

    Hi :-)
    My challenge is to develop a web-app in ADF Faces. Now i verify some technologies to store mailmerge letters in an easy way. The user of my web-app should upload a MS Word mailmerge document and a csv data source file. My web-app must thereupon convert this two files to a pdf per csv-row and store it to a ftp.
    I have build a demo using the open office API. But now i want to try the same by using apache POI and FOP. I can merge the doc files with POI and i can create PDF with FOP.
    My problem is, that POI cant convert to a rtf file and FOP uses an rtf file to create a pdf. I dont know, if its possible to convert a doc file to a rtf file. If its possible, is there an API, which will help me out?
    Regards
    Majo
    btw...I am not sure, if its the right forum for my question :-/

    HeHe, no sorry. The binary file is the same, because Windows bind doc and rtf with MS Word, it opens the file, which you have renamed to *.rtf in MS Word. But as a doc document, not as a rtf file ;-)
    And i dont want to open the rtf file in MS Word. I want to process the rtf file in java.
    Thanks
    Majo

  • I have acrobat 11 standard is it possible to convert pdf files to word files ?

    I have acrobat 11 standard is it possible to convert pdf files to word files ? or is it just possible in the Pro version.

    It sounds to me like you're using Reader, not Acrobat. Make sure you open
    the PDF file in Acrobat, and then go to File - Save As Other - Microsoft
    Word.
    On Thu, Mar 12, 2015 at 2:55 PM, nickk23435928 <[email protected]>

Maybe you are looking for