Is it possible to copy a database expert onto a new report?

Post Author: u039307
CA Forum: Crystal Reports
I have a report created but want to have the database expert used on a different report format. I am trying to avoid formatting time.
Thanks for your support.

Post Author: Robd2007
CA Forum: Crystal Reports
If you mean you want a new blank report with the same database and link set up? couldn't you just save the report under a new name, go to the design tab, select all and delete? This would keep the database setup the same, but give you a blank design sheet.
I may be way off track here if you mean something different

Similar Messages

Is it possible to copy entire database when update from 32 bit to 64 bit?

Just want to update the os from 32bit to 64bit with Oracle9i. Sinece the data amount is very large, to export and import is quite time consuming, so Is it possible to copy entire database? Or any other suggestion?

what's the OS ?
You can check metalink doc, for example this one
Subject: How to convert a 32-bit database to 64-bit database on Linux?
Doc ID: NOTE:341880.1
or
Changing between 32-bit and 64-bit Word Sizes
Doc ID: NOTE:62290.1

I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out". No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record. Although when I play the same song over again, the "miss" occurs in a different location during the song. No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
There is an alternative version for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent. The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer. The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8). It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

I burned disks of previously purchased content that is not available thru iTunes anymore but the latest ver. of iTunes won't let me copy this same content onto a new comp. Is there a way to do this or maybe an earlier ver. of iTunes to download?

I burned disks of previously purchased content that is not available thru iTunes anymore but the latest ver. of iTunes won't let me copy this same content onto a new comp. Is there a way to do this or maybe an earlier ver. of iTunes to download?

Those links in case you need them:
iTunes Windows 10.3.1 (32-bit)
iTunes Windows 10.3.1 (64-bit)
tt2

CR Locks on Database Expert existing rpt / Load report failed on new rpt

Visual Studio 2010 SP1 / CR 2010 13.0.1.220
1) Have a CR (VB) that has been working fine in development for over two weeks and suddenly locks up when attempting to open Database Expert. I right click it to select Expert ... and then nothing. I have to terminate the task.
2) Loaded a Backup of this project to attempt to save the work on the report...same thing...locks up when attempting to open Database Expert. This report will compile and bring data (from XML) into the viewer but I cannot add additional information from the XML using Database Expert.
3) Went to create a totally new crystal report...bombs at the point when the CReport tries to load with error: "Load report failed"
4) From threads on this forum...tried suggestion of downloading and converting "vbnet_win_SimplePreviewReport" from VS2002 to VS2010 ... still receive error "load report failed" when it tries to find "World Sales Report.rpt" even though this report is in this directory: C:\Crystal\CRNET\vbnet_win_SimplePreviewReport\vbnet_win_SimplePreviewReport
I need some assistance to resolve these errors.

See KB [KB 1540637 - Error: External component has thrown an exception. Launching the Database Expert in the embedded Crystal Reports designer in Visual Studio|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533343330333633333337%7D.do]
For more info, search the forums.
Repair of VS2010 and CRVS2010 should also be considered.
- Ludek
Edited by: Ludek Uher on Apr 28, 2011 7:11 AM

HT1414 My laptop and iPad was stolen. My life history is contained in photographs and music, is it possible to restore my iTunes backup onto a new laptop and iPad?

Please can you advise whether it is possible to restore I tunes back-ups onto a new Mac laptop?

If you backed up your iTunes library somewhere befroe the laptop was stolen, then yes of course it possible.
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/ht1751
The third section there talks about how to restore it.

HT1751 is there a way to copy my itunes library onto my new cmputer from my ipod if my old computer has crashed?

My old computer crashed, is there a way to just use my ipod w/o access to my old computer to copy my library onto my new computer?

See Recover your iTunes library from your iPod or iOS device.
tt2

HT1473 How do you copy songs from ipod onto a new computer's itunes store?? Playlists are on old pc??

How do I copy songs from ipod ontoa new computer? Playlists still on old laptop. been trying for hours. Help??????

Ideally you would copy over your library from your old computer or a backup. See this migrate iTunes library post or Recover your iTunes library from your iPod or iOS device.
tt2

Is it possible to copy and paste folders -- to a new point in timeline?

I have a flash file with various folders. Using Flash 8 (but could import it into CS4 if absolutely necessary)
I have a folder in the fla movie which contains various elements.
I would like to copy that folder and paste it into another position on the timeline. (I will swap out some of the contents of the folder after I copy and paste it.
However I don't see a way (at least in Flash 8) to copy and paste a folder. Is it possible? Is it possible in CS4?
Thanks
Rowby

no, but you can shift-click and drag to copy all the layers and frames that you want. you can them paste the copied layers and frames wherever you like and then add those layers to a folder.

I accidently copied one gmail acct onto my new gmail acount in Thunderbird, how do I delete it?

I have 3 different e-mail accounts on Thunderbird. JJ@gmail is my main account. My new acct is tman@gmail. I foolishly tried to move 3 folders from the main acct into the new acct., rather than simply create new folders. Now I have copies of my main acct folders in my new acct and I can not delete them because they are labeled (gmail) How do I clean this up. Should I scratch the new acct and start from scratch? If so , how? SOS!

Can you not put them back where they came from?
How about going to the gmail website and deleting them there?
Deleting the new account sounds good too. If it's IMAP, the messages are actually on the server, so removing the account in Thunderbird has no effect on the messages' existence.
Go to '''Account Settings''' (right-click the account, choose '''Settings'''). Select the tman@gmail account, and at the bottom, under '''Account Actions''', you'll find an option to remove it.

Copy all three OSs onto a new hard drive.

Hello current I have a macbook pro and am splitting the hard drive between osX, windows, and ubuntu. My 500gb hard drive has been out of space for a while (have to delete stuff every time I want to install something new) and so I bought a new 1tb hard drive. (One of those hybrid sdd with 8 gb sdd inside if it matters.)
So anyway how can I keep all three of my os's without starting over? (But each partition needs to be bigger.) I know mac has a good backup and I think that should work, but I am not sure about the entire process. I am guessing I would need to install osx then bootcamp (and windows) and the ubunut onto the bootcamp partition? And is there a way to backup ubuntu to a hard drive and restore it? I know windows has some sort of backup but isn't that just for restore points?
Or is there a better way entirely?
I have an idea on how it will all work, but I really want to make sure I am not missing something (as my data is important to me) and am not 100% sure if this is the best way to go about it.
Thanks so much for your time!

Study the differences between a normal disk and the Momentus XT. Partitioning for example is not really without worries when both partitions must be bootable and I doubt if 3 partitions with bootable OS's will work at all.
But when you use a Virtualizer it will work perfectly well, because the VM is just a large file.
Even with one OS there are differences, see threads here. But in general the XT is much faster when using one OS.

Copying old iTunes library onto a new hard drive: special question:

How do i do this when the music in my old iTunes library was not all in the itunes media folder (some was in downloads, shared folder, etc). Should I put these folders in the places where they were on my old hard drive (for example the "shared" folder was on the desktop) or should i just put everything into the iTunes media folder. My main goal here is to recreate my old itunes library with the playlists intact while also having all the songs recognized (none of those exclamation points because it cant locate the file). Sorry to repeat myself but I just want to make it clear because i dont want this to mess up. Should i put all my music into the itunes media folder for it to show up in the old library, or should I keep it in the folders it always was in and just place those folders in the same locations on this hard drive? Thanks for any help

The solution you linked to looks good, but I'm a bit
confused about if it'll work for my situation - I'll
be putting Vista on a new drive (completely clean
install, not an upgrade), which means that iTunes
will be cleanly installed as well. The way I'm
reading it, it seems the solution there needs an
iTunes install that already interacts with the old
library.
Right, and the way you do this is to hold down the shift key while starting iTunes. (Note: this does not mean holding down the shift key while you click on the icon. It means holding it down immediately after that while the program is starting up.) This will bring up a dialog asking what iTunes library you want to use. Point to the old library, and you're in business.
Let me know if this will work: I drag and drop my
whole music folder to the new drive, then in iTunes I
go to File --> Import and import the itl or xml file.
I've heard this might not work because the xml file
has pathways that refer to a specific drive letter
which will be different.
That's correct. You can edit the XML to fix the pathnames, but I wouldn't recommend that unless editing XML is something you do regularly.

Old computer died - Is it possible to transfer my old music onto my new one

The title explains it all really. My old computer broke to where it was unable to charge and it died. I got a new computer, added itunes and don't have my music from my old computer. Is there any way you can think of At All where I could bring my music from my old computer to my new one when it has a dead battery and it cannot use an outlet.

You should really create your own threads instead of posting your issue into another's. And, did you not read anything in this thread? Visit the links I posted above:
http://discussions.apple.com/thread.jspa?messageID=5105265&#5105265
http://discussions.apple.com/thread.jspa?messageID=4634989&#4634989
http://discussions.apple.com/thread.jspa?messageID=4800696&#4800696
http://discussions.apple.com/thread.jspa?messageID=5102323&#5102323

Is it possible to copy the content ofone ipod to another

My old iPod is broken, I bought a new one ans I was wondering if it's possible to copy the old one onto the new one?

Everything from your old ipod should be on your computer. Just sync it to your new one.

Asset Reporting - Copying Logical Database ADA

Can you please assist with the following query? Im trying to include the following standard R3 ffields within standard R3 reports AR01 (Asset Balances) & AR18 (Depreciation Simulation):
                                Table            Field Name            Data Element
Serial Number            ANLA            SERNR                AM_SERNR
Inventory Number       ANLA            IVNR                   INVNR_ANLA
To date I have been unsuccessful in my endeavours.
I have been discussing with an ABAPer and have been discussing the creation of Z transactions to give me the information Im looking for.
Im looking for help, assistance and expertise whether the following would be recommended or even technically feasible.
·     Is it possible to copy logical database ADA to say ZADA (if yes how would I or the ABAPer go about this)?
·     Is there a way to link existing R3 reports to the new logical database
As the majority of the R3 reports appear to be linked to ADA the aim is to amend this once and not require creating lots of Z reports.
Any help you could provide would be greatly appreciated
Best regards,
Paul

Hi Paul,
this is strange, what release are you on?
I have just checked AR01 on ECC 6.0, and it offers everything you need. On the selection screen of AR01, you can add selection criteria on both Serial number and Inventory number. Plus, you can display both fields in the ALV list.
The data may be stored on table ANLA physically, but the logical database ADA is using a structure (ANLAV) instead. Both SERNR and INVNR are available in that structure. On the selection screen, you have to use the Dynamic selections button. And in the ALV list, you simply add the 2 columns, best idea wold be to save it as a variant for future use.
Anyway, logical databases can be copied in SE36, you simply have to press the Copy button The more critical issue is how to link standard reports to the new LDB. The answer is, no way. Instead, you should copy some of your favorite standard reports, and change the LDB in the copies.
But, I really do not think you need this, as ADA can provide you with the information required out of the box.
Hope that helps, points welcome
Csaba

Is it possible to copy a database expert onto a new report?

Similar Messages

Maybe you are looking for