Is it possible to copy a user fm one client to another
Hi'
Is it possible to copy a user from one client to another client?
e.g., in our DEV we have two client say 500 & 201.A user say dev_user is present in client 500 with some authorization.Now i want the same user dev_user with same authorization in client 201.
note:-
*according to my knowledge user is a client dependent.
*plz avoide hint like
1)create a new user in 201 with the same user name with the help of su01
2)client copy.
Hi,
I am not sure of replication a single use, but u can move all users by CLIENT Export. That means , u will be creating a transport request which will contain all User master records using SCC8. here select the USER profile SAP_USER.
Hope this helps
Cheers !!
Similar Messages
-
How can I move particular users from one client to another client
Hi, I am trying to find a way to move few or many user from one client to another. Is there a transaction available or program to move them. e.g. there is a SCC1 available to move transport only from one client to another without going through TMS.
Is there any trick available ?
thnx in advanceclosing this one. thnx
-
Error while copying GL Accounts from One Client to another client
Hi,
We are trying to copy GL accounts created in one client to another client (Company Code is same in both the clients). First we executed FS15 (send) and a file was created on the server. With the help of BASIS team we checked that file and it contained the required values. However, when we are doing FS16 (receive) we are getting following OK messages:
File /usr/sap/DEV/SYS/global/FBISABC is being checked
Session 1 session name RFBISA20 : No terminations have been found
However, at the same time we are getting following error message:
File name FI_COPY_COMPANY_CODE_DATA_FOR_GENERAL_LEDGER_0X is unknown
Message no. SG001
Diagnosis
No entry was found in the conversion table for the logical file name FI_COPY_COMPANY_CODE_DATA_FOR_GENERAL_LEDGER_0X.
Procedure
Add an entry to the conversion table for the logical file name. Maintain the conversion table with the transaction SM30.
Can someone please advice is there something wrong that we are doing for copying GL accounts from one client to another client.
Thanks,
SanjayDear Sanjay,
Did you check the batch-input? SM35
It could have happend that there was a mistake in the batch-input data and that the destination file has not been written. If this has not been written it could not be found. (I.E. you tried to transport G/L Accounts with deletion flags but did activate the checkbox "Transfer deletion ****").
There is another point: Did you activate the box "Datei nur prüfen" (English: Check file only)? If this box is activated the programm will check if the batch-input-file will be written without mistakes but it will not write the file. Only if the checkbox is not activated the batch-input-file will be written. (the same with FS16).
Kind regards
Maike
Edited by: Maike Nemeyer on Dec 1, 2011 8:52 AM
Edited by: Maike Nemeyer on Dec 1, 2011 11:45 AM -
How do the copy the Recording form one client to another client.
Hi all
I have one scenario like
We need to process the sales documents which are not process to output(means send the document to printer) .
For that I have to write a BDC program,
In that program we need to list out the all the documents which are not process .
Then we need to do the Recording for VA02.
NAVIGATION IS LIKE : va02 --> enter the doc No --> go the Extract(main menu) --> output --> Header --> Edit --> select the output type -->Save --> go the Sales Document(in main menu option) --> issue output --> print.
But what my quarry is we have to do Record that T-Code (VA02) client 040 but we dont have any test data (any entries),
We have another client 093, in this client we dont have authorization properly, means I able to Record but I am unable to create the program after recording why becace we don't ahve authorization for SE38.
Please tell me is there any possible Export the Record form one client and Import to another client.Hi Amjad,
Yes we can transfer from one client to another client.
to copy client from 901 to 903. if you have created a recording in client 901, go to transactions SHDB, double click on the specific recording, it will open the recording. there got to menu path: recording->export. export to a text file.
in client 903 create a sample recording. open the recording in change mode, delete all lines. then go to menu path Recording->import, import the text file.
it will works fine.
Regards
Krishnendu -
Isit possible to copy DRM version from one database to another?
I want to copy a version from DRM (Development environment) to another instance (production environment) by copying one database to another database. In order to synch both the version. Is this possible? rather than exporting and reloading?
It is possible, but I want to know the steps invloved for this
Thanks in advance
Edited by: Ramesh Janardanan on Jun 19, 2012 6:21 PMHi Ramesh,
You can use the DRM Configuration console for this purpose. Please follow the below steps:
1. Open Repository Wizard
2. Check - Copy/Upgrade
3. Enter Source connection details and test connection
4. Click Next on Analysis summary
5. Enter Target connection details and test connection
6. Confirm Copy by clicking Next
It copies everything. Hope this helps!!
Cheers, Vicky. -
Possible to copy automation data from one project to another?
Hi
I have done some automation editing to a region in a project, and I would like to copy it to an identical region in another project. Is this possible?I have not tried this method I'm now going to describe, but 'logic' dictates it should work:
1. In your donor project, open the *Automation Event List* , ctrl-⌘-E, then open a new Arrange window, ⌘-1. The new arrange window will now contain regions that only hold automation.
2. Go to *Logic Pro>Preferences>Audio>Devices>Coreaudio* tab and UNtick the Enabled box. (If you don't, each audio file and instrument will have to be reloaded each time you switch from one to the other project. That would drive anyone absolutely nuts.)
3. Now open the other project, get an Automation arrange window there, like in 1.
Now you should be able to copy/paste automation regions between the two projects.
Hope this works... I think that you need to set the playhead at the right position before pasting, but you'll have to figure that out yourself...
regards, Erik. -
Copy a User from one infrastructure to another
Hello there,
We have a user in the development infrastructure.He is belonging to many groups in the infrastructure.
We have another infrastructure environment.All the groups available in develoment environment are existing here too.
I want to create the same user in second infrastructure using ldap script.Will this user map automatically to the corresponding groups?
How to impliment this?
I would appreciate , if you can shed some lights on this.
Note : We are using Application server 10.1.2.2.0 on both environment.
Thanks in advance,
RajYou can't do this.
When you duplicate a photo you're creating a version (or virtual copy) of the photo. Both the first and the virtual versions point back to the same Master. The Master lives in the Event.
You can have different versions in Albums, as these too are virtual. A shot can be in any number of Albums and use no extra disk space. Having a shot in two Events uses double the disk space.
If you're determined to have a shot in multiple events then export the shot (file -> export) and then import the exported version back into iPhoto.
At heart, Events are organisation for those who can't really be bothered. They are automatic - based entirely on Date and Time the camera records the photos as taken. You can move photos between Events, you can Merge Events, you can Rename them and sort them in various ways.
Now it's time to look at albums which are much more flexible than Events as an organising tool. -
Is it possible to copy page content from one book to another?
Have 2 books in a single Aperture project.
Need to copy one page content from book 1 to an empty page of book 2.
Tried all my best, but couldn't manage.
Anybody please advice.At the time the "copy content" only works between pages in the same book. Even if you drag the involved images to the new book, copying content between the two books don't work. This I believe could be a bug and do hope it is corrected soon.
Regards
Paul K -
How to copy system table from one client to another client
Hi,
Currently i am implementing recruitment module in one of the power sector company. I have finished all the configuration in one of the client in development server. I have trasported all the request in Qulaity server so that i can do the testing. When i am running TCode : PBA7 (Direct Data Transfer) i am getting a runtime error with error analysis -
A SELECT, UPDATE, or DELETE statement contains the invalid table
name "PB0021".
I have checked this system table in this client (Quality Server) but this table is not available, but at the same time this table is available in Devepment server client where i can run this transaction.
Requiring your help on this to resolve this issue. Do i need to copy this system table PB0021 from Development server client to Quality server client? If so then how to do this activity?
Thanks in advance....
Regards,
MilindHi Milind,
Goto SE01.
Create a workbench request manually.
Add the following entry.
R3TR TABL PB0021.
Transport the request to quality system.
Hope this works.
Best wishes,
Dilek -
How to copy a role from one client to another in a system using the CUA?
Dear all,
I have a question about transporting roles. We have CUA configured on our SAP system. Our development environment contains several clients. Recently I created a role by using PFCG in the development environment named E1D-100. Later there was a need to affect a user by this role but on another client of the development environment named E1D-200.
How can I transport a role from a client of the development environment to another client of the same environment.
While I use SU01 to assign the role, after clicking on "user comparing", I can see that the new created role exists on E1D-100 (the client of the development environment where the role was created), but I see that the role doesn't exist on the other client E1D-200.
How should I proceed?
Thanks in advance,
DariyooshHello again,
Thank you very much for all of your answers. I tried both solutions and both worked pretty well. Thanks a lot for your help.
Kind Regards,
Dariyoosh -
Copy Custom toolbar from one instance to another in Project server 2007
Hi,
I am currently using project server 2007. We have a number of instances in our Project server enivoronment. Is it possible to copy customized toolbar from one instance to another? If yes, how?
Thanks in advanceHi Khaldun,
As per my reply in your previous post, here is a link explaining how to use the organizer:
Http://blogs.msdn.com/b/project/archive/2010/10/22/tips-and-tricks-copy-custom-views-filters-tables-and-other-elements-to-other-projects.aspx?Redirected=true
Basically, just copy the toolbar from the global source instance into a blank project file. Then do the same operation from the blank file containing your toolbar into the destination global model, still using the organizer.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
Is it possible to limit the user to one session?
Hi
We have Oracle apps R 12.0.6, single node installation. Because of performance issues, i want to restrict the user to have only one session. Is it possible to limit the user to one session?
Regards
ArizuddinAteeq,
I tried to load the event and subscription according to metalink document id
About the oracle.apps.icx.security.session.created business event. [ID 304209.1]. it says file does not exist.How to resolve this?Could you please post the command along with the complete error?
Regards,
Hussein -
Can I copy my iTunes from one Mac to another to a distant location?
I have 2 homes one in NYC and the other in upstate NY. I have multiple Macs at both locations all using Snow Leopard and the latest version of iTunes(9). I only have 1 iTunes library I maintain at the upstate location and have to bring my iPod to the NYC location to play my music. Can I not copy my iTunes library to the NYC location using Home Sharing or using some other method? I often forget to bring my iPod and am left without my music.
Prince Moe wrote:
Hi
Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
I need the settings for
System (view, font, color,)
Finder (view, etc)
iTunes (that include all library, playlists, etc),
Firefox (Bookmarks, settings & plug-ins),
Safari (Bookmarks, settings & plug-ins),
Address Book (contacts)
Thuderbird (emails accounts, contacts, passwords, etc)
Stickies (stickies on the dock - i have info on there unsaved)
Filezilla (FTP infos)
Would appreciate.
Thnx.
All that info is found in your user/library folder, I just did a 60 machine rollout and copied all those settings from user/library, just be forewarned that if you upgrade software those setting will not take on the machine, for example Adobe CS 3,4 will not usable by CS5. let us know if you need more help. Also make sure you copy most of your preferences in the user/library/prefences folder.
Note: If you are using an identical backup with all apps and user settings, you can just copy all folders from user to your new home folder. Remember that only if the image or backup is identical to your production OS. -
Can i copy my settings from one mac to another?
Hi
Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
I need the settings for
System (view, font, color,)
Finder (view, etc)
iTunes (that include all library, playlists, etc),
Firefox (Bookmarks, settings & plug-ins),
Safari (Bookmarks, settings & plug-ins),
Address Book (contacts)
Thuderbird (emails accounts, contacts, passwords, etc)
Stickies (stickies on the dock - i have info on there unsaved)
Filezilla (FTP infos)
Would appreciate.
Thnx.Prince Moe wrote:
Hi
Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
I need the settings for
System (view, font, color,)
Finder (view, etc)
iTunes (that include all library, playlists, etc),
Firefox (Bookmarks, settings & plug-ins),
Safari (Bookmarks, settings & plug-ins),
Address Book (contacts)
Thuderbird (emails accounts, contacts, passwords, etc)
Stickies (stickies on the dock - i have info on there unsaved)
Filezilla (FTP infos)
Would appreciate.
Thnx.
All that info is found in your user/library folder, I just did a 60 machine rollout and copied all those settings from user/library, just be forewarned that if you upgrade software those setting will not take on the machine, for example Adobe CS 3,4 will not usable by CS5. let us know if you need more help. Also make sure you copy most of your preferences in the user/library/prefences folder.
Note: If you are using an identical backup with all apps and user settings, you can just copy all folders from user to your new home folder. Remember that only if the image or backup is identical to your production OS. -
Copy a page from one Document to another
Can anyone help
In Pages '08 we had the ability to copy a page from one document to another.
In Pages '09 this does not seem possible.
Does anyone have anwser....
Thanks
Message was edited by: AJCUR
OK my bad
I just realized that I was in Word Processing in one document and Page Layout in another and you cannot do the copy between the two. Changed the Blank documentto word processing and voila it worked.I think this might help. Go to the document you want to copy the page from and go to the "View" menu and choose "page thumbnail" so you can see the thumbnails on the side of the document. Right click (or control click) on the thumbnail of the page you want to copy and choose "copy.
Go to the document you want to paste the page into and make sure you have the "View thumbnail" option turned on. If you already have some pages click on the page you want the new page to follow and then right click and paste the page where you want it. (you have to do this in the thumbnail view area, not in the actual document itself.) If you have inserted the page in the wrong spot, just drag it to the right location. note: I have tried dragging the thumbnail from one document to another and it does not work. Too bad because it works that way with a PDF documents in "Preview" app.
Maybe you are looking for
-
What are the license conditions for the customer ?
What is the license agreement for the customer to use Beehiveonline ? Is it similar as the OUM Customer model copied below? thanks Francis OUM Customer Program: The OUM Customer Program allows customers to obtain copies of the method for their intern
-
Multiple signatures on PDF Form
I need to solve this last issue so I can put our digital signature initiative to rest. I have attached a sample of the kind of form we need to be able to create. The first section of this form is an approval document, the second part is a closure rec
-
What should I use to clean the trackpad?
I bought iKlear to clean the screen of my MacBook and it works great. I have been using it for years on my iBook. I was reading the directions and it says not to use it on the trackpad. I had used it on my iBook trackpad with no problems. What should
-
Callable statement problem-very urgent
Hi Friends, i have 2 tables, in that two tables one column have same attribute column. when i update the first table through OAF page, i wanted to effect updated value in second table of that common field also. i wrote PL/SQL Procedure and called tha
-
i dont even know if im in the right community. anyway, the thing im having trouble with is syncing my notes. im pretty sure i have the most recent software for the iphone 3, i think. however, i've never been able to sync notes from the iphone to my l