Is it possible to copy tables from another application or excel into forms

I wasnt to insert tables from another application or excel into forms. currently it copies over the information from the table but doesnt keep it in a table format? Is it possible to do this?

Dear try67
I just forwarded him to a page (by Adobe Expert) where I had hoped this will help him.
It could also be your side.
I don't think that it took a comment from another. Unless it is a personal good advice. I just wanted to help and free of charge
Sometimes we overlook a detail by quick reading. Is this never happened to you ?

Similar Messages

  • CS5 - Help copy from another application and paste into CS5

    I am not able to copy an image from another application and paste into my CS5 image.
    I can paste the image into any other program except for CS5.
    Does anyone know how this issue can be fixed?  Very frustrating, since it is such a simple process.
    Thanks!

    You probably have at least one plug-in made by Nik Software.  They're known to interfere with Photoshop's ability to access the clipboard.
    I believe there's a Nik configuration file change needed, or possibly a removal of all or part of the plug-in to restore Photoshop's access to the clipboard.  There's another thread on this forum that's gotten quite long on the subject, and in it are some possible resolutions...  Ah, here it is:  http://forums.adobe.com/thread/680075
    -Noel

  • Error while trying to copy template from another application

    Hi,
    I am getting this error while trying to copy template from another application:
    report error:
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    This report is located here:
    Home-Application Builder-Application 150-Shared Components-Templates-Replace Templates
    best regards,

    It is usually a permissions issue.. you have read but not write permission. Why it would suddenly change is one of those Apple Mysteries... but it happens.
    Open the directory (folder) where your media files are.. and check the permissions.. see if you can fix them.
    The problem is the folder on the TC might have lost your ownership and you might not be able to change it.. Apple do not provide anyway to regain permissions because you would need low level access to the TC firmware.
    I would just as a matter of course reset the TC to factory and redo its setup.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Do the setup via airport utility using different names.. short, no spaces and pure alphanumerics. Make sure passwords are also pure alphanumeric mixed case and numbers.. 8-20 characters is usually plenty.
    Mount the disk in finder and see if you have the same issue.. I am not expecting a change.. but it is worth a try.
    No luck you can copy your files off the TC.. wipe it .. and then copy them back.. no bad thing unless you already have a backup of your files at the moment. In which case you can just wipe the TC and copy the files now.

  • How AWT TextField can copy/paste from another application?

    Hi,
    We know in applet for the security reason you can not access the getSystemClipboard from the Swing component like JTextField. But We know that with AWT TextField, you can copy and paste from another application. My question is how AWT textfield implemented with this feature. I don't think it is via the systemclipboard. Can some explain this for me?

    the simplest way is to select the part of charactors and drag them into your textfield ^O^

  • Template error while copying page from another application

    I am copying a page from one application to another within the same workspace. The page I am copying has several customized template that it uses. When I copy the page to the other application all goes well until I get to the step of assigning the Templates. Instead of seeing the list of templates used and being able to change them for the new page to match with the page i am copying, i get an error in the Templates area that says:
    report error:
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    Anyone else run into this? Is this because of the number of templates? I have added several new customized templates. The pages all work ok, its just when i am trying to copy a page from one application to another.
    Thanks,
    John

    I'm seeing this behavior as well, but in the Authorization Schemes & LOV sections of the copy. I can continue with the page copy, but the LOV & Scheme information is lost and needs to be manually re-entered. Would love to get a fix for this!

  • Copying & pasting from another application

    When I was using Dreamweaver CS3, I had no problems copying
    and pasting content from a word document, everything came over even
    the links... now every time I copy and paste from Word to
    Dreamweaver CS4, I get an error message "error occured while
    processing input" - why does this happen and how can I get all the
    content to copy over properly including links? This also happens
    when I copy and paste from an email note and it didn't with CS3.
    Also, I find it more diffucult to put in background images
    into table cells, center text.. etc.. I do not like the new methods
    of formatting documents.. CS3 was much better. I have been using
    Dreamweaver since the beginning, over 10 years ago and this is the
    worst upgrade ever.

    I have Office 2002.. I never had this issue when I used CS3
    of Dreamweaver. This just doesn't happen with word, even when I
    copy and paste from an email into CS4, I get the same error message
    (it doesn't crash). It just says 'error occured while processing
    input'. I click on ok and the text comes in but none of the
    formatting (links etc). This is rather annoying. I'd go back to cs3
    if cs4 hadn't cost so much.
    When I used to add a background image in cs3, in the
    properties window there is a place to add background image in a
    table.. this feature is not present in the properties window of
    cs4.
    Another issue is something simple like centering text.. now I
    have to create css to even center text!

  • Copy information from another application

    Hello Experts,
    I'm facing some issue, and I've tried a lot of approachs and still without a answer.
    There is two application, one of Sales and another of Production.
    After planned the Sales, based in the volume of sales, we project the production applying another measures.
    So, what I need is after planned Sales, copy the informations of volume, from Sales to Prodution, changing just one member, that is a master data.
    I've tried to use script logic, LOOKUP (script below), and use BADI with this [document|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0480970-894f-2d10-f9a5-d4b1160be203?QuickLink=index&overridelayout=true]. But the point is, that with this document, we start from the app source to the app destination, and what I'm looking for is the opposite.
    Well, if somebody could help me. Thank you a lot.

    Hi, thanks for your reply.
    Ok, let me explain better. What I need is this, in the source application we have this data.
    APP:SALES
    CATEGORY=PLAN1
    ENTITY=1000
    INPUTCURRENCY=NONE
    MATERIAL=E00000778
    TIME=2012.JAN
    UNIT=KG
    P_ACCT=0002
    SIGNNEDDATA=1050,000
    And I need to copy this values to another app, but, changing the P_ACCT and adding the CostCenter, like this:
    APP:PROD
    CATEGORY=PLAN1
    ENTITY=1000
    COSTCENTER=NONE ***
    INPUTCURRENCY=NONE
    MATERIAL=E00000778
    TIME=2012.JAN
    UNIT=KG
    P_ACCT=0012 ***
    SIGNNEDDATA=1050,000
    The script is the folowing. I'd done this based in some threads that I saw.
    //Production APP
    //Take informations from SALES
    *LOOKUP SALES
    *DIM SALES1:CATEGORY="PLAN1"
    *DIM SALES1:ENTITY = "1000"
    *DIM SALES1:INPUTCURRENCY = "NONE"
    *DIM SALES1:P_ACCT = "0002"
    *DIM SALES1:UNIT = "KG"
    *DIM SALES1:MATERIAL = "E00000778"
    *ENDLOOKUP
    *WHEN LOOKUP(SALES1)
         *IS > 0
                 *BEGIN
                   *REC(P_ACCT="0012",EXPRESSION=%VALUE%)
                 *END
            *NEXT
    *NEXT
    Thanks!
    Edited by: Lucas Gabriel Corrêa da Costa on Jan 6, 2012 12:45 PM

  • To copy table from one database to another

    hai,
    I will be really pleased if someone can me tell me that how can i copy table from one database to another. I am having two databases.
    Gursimran

    You can Also do
    ++ Create a database link on the TARGET to SOURCE
    CREATE PUBLIC DATABASE LINK <<DBLNK_NAME>> CONNECT TO <<USER>> IDENTIFIED BY <<PASSOWORD>> USING '<<TNS_NAME>>';
    ++ And copy as below
    CREATE TABLE EMP AS SELECT * FROM EMP@DBLNK_NAME;

  • Is it possible to copy paste from one GarageBand project to another?

    I would like to move some of the audio tracks I recorded in another project to my current project in which I have some other recorded stuff.

    makeshiftuser wrote:
    Is it possible to copy paste from one GarageBand project to another?
    yes. skim the tutorial on rescuing damaged files to see the procedure:
    http://www.bulletsandbones.com/GB/Tutorials.html#allaboutrescuinggaragebandfiles
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How to import a table from another oracle database ?

    Hi all ,
    i could like to use pl/sql to import one table from another oracle database server ?
    is it possible to do this ?
    A server B server
    table: test <------------------------> table : newtest
    the tns profile already configurated . the connection is ready .
    thanks a lot !
    Best Regards,
    Carlos

    if i don't have TEST table on server B whether COPY command will create this table on server B with the same structure ? If you specify CREATE as a clause the table will be created:
    SQL> help copy
    COPY
    COPY copies data from a query to a table in a local or remote
    database. COPY supports CHAR, DATE, LONG, NUMBER and VARCHAR2.
    COPY {FROM database | TO database | FROM database TO database}
                APPENDCREATE|INSERT|REPLACE} destination_table
                [(column, column, column, ...)] USING query
    where database has the following syntax:
         username[password]@connect_identifier

  • Copying Plant from another plant.

    Hi all,
    I am creating a new plant referencing another plant from the same company code.
    I completed that and found that the plant was not correctly coppied for some
    Now is it OK if I delete newly created plant and try to re-create it in the system again by copying it from the other plant.
    Or is it possible to get me the list of all the tables which are normally coppied when you copy plant from another plant.

    If there are few accounting documents existing for the plant
    Just copy the existing plant and rename it in ox10
    thanks
    G. Lakshmipathi

  • How to copy images from another MC in reversed order??

    Hi everyone,
    I'm new to AS3 and have been fighting and searching for a solution to this problem for a week now, and I'm VERY close!
    I crated a MC holding of a series of images (about 50) and I jump around in it using plenty AS3 scripts (most of which I don't fully understand yet, but I'm working on that to! )
    I had to find a way to "rewind" (= play backwards) the MC. Since there is a stop(); command in almost every frame, prevFrame does not work and if I put that in a loop, it goes WAY to fast (but worked).. So I could think of only one way...
    Create a new (reverserd) MC with the same image sequence ald reverse it manually and play that one.
    This all works fine (very proud of it ).
    Now my question:
    To get this to work for multiple image sequences, I have to load all images twice (once in MC_1 and again in MC_2 and select them and reverse them).
    Not a big one, unless you want to create MANY of those SWF's...
    Is it possible to load the 50 images of the first MC in reverse into the second MC dynamically? JUST the images, noting else.
    extra info: the MC_2 is already in the lib(empty) and placed on the stage.
    something like:
    var pointer:Number=1;
    for (var:i:Number=50;i>=0;i--) {
    get MC_1.picure(var);
    put it in MC_2.frame(pointer);
    pointer = pointer + 1;
    All help is welcome and please take into account that I have little experience and copy most of my scripting from people like you
    T.I.A.
    Melluw

    I tried your advice (thanks for that)
    The event I already have is the mouse leave
    I //-d out the part I removed (what did work)
    The code I ended up with is:
    function Start() {
    stage.addEventListener(Event.MOUSE_LEAVE, cursorHide);
    function cursorHide(evt:Event):void {
    var currFrame = MC_1.currentFrame;
    if (CCW == true) {  //it is true in this case
      movStart = (50 - currFrame);
    else {
      movStart = currFrame;
    if (movStart>25) {
      MC_1.prevFrame();
    // removed swapChildren(MC_1, MC_2); // This is the part I removed
    // removed MC_2.gotoAndPlay(movStart);
    else {
      MC_1.gotoAndPlay (movStart);
    And if I leave the stage on the part where movStart is indeed >25
    Nothing happens,
    So I guess this is not what you meant
    Subject: Action Script 3 how to copy images from another MC in reversed order??
    I cannot direct you in the loading of the images approach, it will be too complicated, and will probably not work anyways... when you move away from a frame that has dynamic content, you lose the content.  So basically, there is nothing practical in taking that approach.
    I do niot understand what the problem will be with the enterFrame/prevFrame approach. If everything you can do with the mouse is already used (which I doubt) by the first mc, then there is nothing else you can do with this file.  You probably just need to rethink your control scheme.  You should search Google for "AS3 slideshow tutorial", and to lighten up your design, add "XML" in that search.
    >

  • Create table from another table including constraints

    Hi,
    Is there a way to create a table from another table including constraints.
    CREATE TABLE COPY_EMP
    as
    SELECT *
    FROM EMP
    WHERE 1 =2 ;
    This creates the table, but the constraints are not copied over.
    I was reading about DBMS_REDEFINITION - can that be used for this scenario ?
    Thanks!
    Anand

    >
    I tried that, but the constraint names are posing a problem. And unfortunately our constraints are not named in a standard, so am finding it difficult to replace them.
    Was just wondering if there were any simpler approach to this.
    >
    No - there isn't.
    You will have to use new names for the constraints. That usually means extracting the DDL and manually changing the constraint names.

  • Is it possible to call methods from another class from within an abstract c

    Is it possible to call methods from another class from within an abstract class ?

    I found an example in teh JDK 131 JFC that may help you. I t is using swing interface and JTable
    If you can not use Swing, then you may want to do digging or try out with the idea presented here in example 3
    Notice that one should refine the abstract table model and you may want to create a method for something like
    public Object getValuesAtRow(int row) { return data[row;}
    to give the desired row and leave the method for
    getValuesAt alone for getting valued of particaular row and column.
    So Once you got the seelcted row index, idxSelctd, from your table
    you can get the row or set the row in your table model
    public TableExample3() {
    JFrame frame = new JFrame("Table");
    frame.addWindowListener(new WindowAdapter() {
    public void windowClosing(WindowEvent e) {System.exit(0);}});
    // Take the dummy data from SwingSet.
    final String[] names = {"First Name", "Last Name", "Favorite Color",
    "Favorite Number", "Vegetarian"};
    final Object[][] data = {
         {"Mark", "Andrews", "Red", new Integer(2), new Boolean(true)},
         {"Tom", "Ball", "Blue", new Integer(99), new Boolean(false)},
         {"Alan", "Chung", "Green", new Integer(838), new Boolean(false)},
         {"Jeff", "Dinkins", "Turquois", new Integer(8), new Boolean(true)},
         {"Amy", "Fowler", "Yellow", new Integer(3), new Boolean(false)},
         {"Brian", "Gerhold", "Green", new Integer(0), new Boolean(false)},
         {"James", "Gosling", "Pink", new Integer(21), new Boolean(false)},
         {"David", "Karlton", "Red", new Integer(1), new Boolean(false)},
         {"Dave", "Kloba", "Yellow", new Integer(14), new Boolean(false)},
         {"Peter", "Korn", "Purple", new Integer(12), new Boolean(false)},
         {"Phil", "Milne", "Purple", new Integer(3), new Boolean(false)},
         {"Dave", "Moore", "Green", new Integer(88), new Boolean(false)},
         {"Hans", "Muller", "Maroon", new Integer(5), new Boolean(false)},
         {"Rick", "Levenson", "Blue", new Integer(2), new Boolean(false)},
         {"Tim", "Prinzing", "Blue", new Integer(22), new Boolean(false)},
         {"Chester", "Rose", "Black", new Integer(0), new Boolean(false)},
         {"Ray", "Ryan", "Gray", new Integer(77), new Boolean(false)},
         {"Georges", "Saab", "Red", new Integer(4), new Boolean(false)},
         {"Willie", "Walker", "Phthalo Blue", new Integer(4), new Boolean(false)},
         {"Kathy", "Walrath", "Blue", new Integer(8), new Boolean(false)},
         {"Arnaud", "Weber", "Green", new Integer(44), new Boolean(false)}
    // Create a model of the data.
    TableModel dataModel = new AbstractTableModel() {
    // These methods always need to be implemented.
    public int getColumnCount() { return names.length; }
    public int getRowCount() { return data.length;}
    public Object getValueAt(int row, int col) {return data[row][col];}
    // The default implementations of these methods in
    // AbstractTableModel would work, but we can refine them.
    public String getColumnName(int column) {return names[column];}
    public Class getColumnClass(int col) {return getValueAt(0,col).getClass();}
    public boolean isCellEditable(int row, int col) {return (col==4);}
    public void setValueAt(Object aValue, int row, int column) {
    data[row][column] = aValue;
    };

  • What are the diffrent ways to copy data from one application to another?

    Hi,
    Can you guys tell me what are the different ways to copy data from one application to another application??
    I know we can do it through script logic using DESTINATION_APP.
    Is there any other way to copy data from one application to another application?
    Please help me
    Thanks,
    Charly

    You can also call a custom DTSX package in SSIS via the datamanager.
    there are at least 5 ways of transfering data in BPC between apps.
    1. Through the front end (excel etc) via evdre/evsnds
    2. Through Script logic using *Dest App
    3. Using BPC's standard export dtsx package via DM
    4. Using SSIS using BPC's custom SSIS tasks
    5. Through Script logic using stored procs.
    i am sure people will come up with more.
    remember if you use ssis and move data into any table but the wb, you need to process the cube afterwards.

Maybe you are looking for