Is it possible to correct camera shake in CS2

Is it possible to correct camera shake in Photoshop CS2

Dear Noel,
Many thanks for your information, I saw your reply to my question on the forum but being a newby to forums et al I do not know how to put my thanks on the page yet but I will get my head round it sooner or later. It all seems rather complicated when one gets old and decrepit, I had quite a job to get the question on there in the first place.
Once again thank you and best regards,  Tom Gibson

Similar Messages

  • Correcting camera shake in a sequence of still images

    What is the best way to change registration of one image in a sequence of images that will become a timelapse movie? I am hoping to do it before rendering the stills into a movie in order to retain the best image quality. I am currently using Lightroom 3.6  and Photoshop CS5 Extended, on both Windows 7 (Home Premium Sp1) and Mac OSX (10.6.8)

    what your taliking about is called an animatic
    and in fcp alot has to be done by hand so to speak .
    i have to do these a few times a month for the show i work on .
    and fading with such short frames doesnt not work well and why would you want fades for animation?its just more work .
    the other thing your bringing up is a animation term called tweening (in betweeing frames)to smooth action.
    scripts can be made for things like this but thats the fun of learning ,
    i have spent time doing my scripts for this process and it can be a process.
    welcome to the world of animatic storyboarding.

  • Camera Shake corrections in Premiere Elements 11

    I have an interview that has several camera shakes in it.  I have tried to add the video stabilizer to the clip, but that freezes all movement and continues with the audio.  Everything I have researched says there should be a video warp, but I am not seeing this on PE11.  Any help would be greatly appreciated as I am new at this!!  Thanks

    mallorykpoe
    The Warp Stabilizer is a feature of Premiere Pro, not Premiere Elements (any version).
    Apparently you have found the Premiere Elements 11 Video Stabilizer/Stabilizer under fx Effects in your Premiere Elements 11. (By the way, on what computer operating system are you running Premiere Elements 11?)
    I would give another look at the Premiere Elements 11 Stabilizer effect, going a lot less on the settings. Often here you gain more by less than by more.
    The results also will depend on the nature of your footage. And, note that a file to which Stabilizer is applied has a markedly increase Timeline render time.
    There are alternative products. If you are a Windows 8 or 8.1 64 bit users, the Movie Maker will present with a Video Stabilizer that you might want to explore.
    Please review and consider and then let us know the results obtained.
    Thank you.
    ATR

  • Photoshop CC Sharpen - Camera Shake tool. Why can't I access this tool.

    PS CC Sharpen - Camera Shake tool, has anybody had problems accessing this tool and has an answer to overcome the problem.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Camera shake reduction filter - double exposure blur problem

    I am having a problem using the camera shake reduction filter to work on a digital image of an old photo which had a clear cut motion blur which formed a
    double exposure when the camera motion stopped... this can be seen when the image is enlarged. Is it possible to sharpen these type of images ?

    Can you post a small bit of it?
    Usually the Shake Reduction tool will improve an image some, especially if you hunt around with the position, size, and shape of the analysis region until it gets it just about right, but there's really not a magical fix for motion-blurred images.  Such an image, with whatever recovery mechanism, will not ever look as an image that's well-exposed to begin with.
    -Noel

  • HT1339 my ipod shuffle(1st generation) is corrupted (error 1442) it will not restore.             is it possible to correct this or is it beyond repair. It worked the last time I used it on my laptop with Windows Vista. Vista.

    My ipod shuffle (1st generation) will not restore. It says it is corrupted(error 1442) Is it possible to correct this problem, or is it beyond repair. It worked last  time I used it on my laptop with Windows Vista. Any help would be much appreciated.

    Im actually tilting it up where it cinnects to my iPod, not where it connects to my computer, and i have tried three(yes, 3) different cables, one of which i bought brand new. still nothing, and i've also tried different USB ports on my computer,....nothing. Could this simply be a hardware failure of somekind? maybe a physical problem...i mean, why would i have to tilt the cable in order for my computer to actually read my iPod? im looking at the USB connector on my iPod (maybe it's my imagination, not sure) it possible might be bent, the little metal part in the port.

  • How can I reduce (or remove) camera shakes in a video with Premiere Pro CS5???

    I want to reduce (or remove) camera shakes in a video with Premiere Pro CS5. Is there an build-in plugin I can use, or do I have to  download / buy one? Thanks.

    You didnt need to look very far down the page to see this...
    http://forums.adobe.com/thread/619165?tstart=0

  • When I upload videos from iphone 4 to PC they skip frames. It isn't camera shake or anything like that.  Any solutions?

    when I upload videos from iphone 4 to PC they skip frames. It isn't camera shake or anything like that.  Any solutions?

    Wow that was really quick, thank you so much.  Im not sure at all which version it was because i said it was around 4 years ago he bought it.  I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names.  isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
    So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
    either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
    sarucia

  • Is it possible to correct a typo in the menu?

    There's a typo in the text of the menu of a DVD that I created in iDVD. Is it possible to correct this error without redoing the project? An idea that I have in mind would be to make a "dummy" DVD that has the correct menu, copy both DVD's to my hard disk, mix some of the files from one of the DVD's with files from the other DVD, then finally burn this mixture. There are all these VOB files, etc. The question is which (if any) of them corresponds to the menu.
    G5 + Powerbook G4   Mac OS X (10.3.8)  

    Sorry but that won't work. Your video, titles and all, are now one big long MPEG-2 files. There is no way to repair certain parts of a project by editing or moving around the video DVD files.
    You have to fix it in iMovie and reburn it in iDVD. Or live with it.
    Patrick

  • I made an error asking to receive Windows product of Adobe Element 13 and Premiere while I needed the Mac Version.  How is it possible to correct this error ? and what do I have to do if you accept ?

    I made an error asking to receive Windows product of Adobe Element 13 and Premiere while I needed the Mac Version.  How is it possible to correct this error ? and what do I have to do if you accept ?

    Normally an Elements license is valid for both Windows and Mac systems.  So you might only need to download the Mac versions of the applications and use your serial number to activate them.

  • Correct Camera Raw Plug-in?

    What is the correct Camera Raw Plug-in for Lightroom 4 used with Photoshop CS4?

    KayLair3219 wrote:
    Thanks.  You said "It will be necessary to render a TIF image with Lightroom adjustments, and send that image to Photoshop."  I used to right-click on an image in LR and choose "Edit in Photoshop," and it opened in Camera Raw first.  How do I send it as a TIF? (how do I render a TIF image and send that to Photoshop?)
    I don't recall ever going from Lightroom to ACR.  However, if it really did that, it was probably because your ACR was current with Lightroom.  Now you have Lightroom 4, the raw processing is more advanced.  And the ACR you are using cannot read all of the adjustments.  So it's better to render a copy of that includes the Lightroom adjustments and send that to Photoshop.  Otherwise it will be difficult to get a matching image.

  • Recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of

    recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of images I usually take on a weekly basis.  I bought a new faster laptop but when I looked for the cd with the software and serial I could not find it in the Xmas clutter.  I downloaded a trial version of lightroom and got it working on my new laptop. Is there a way to access the serial number from my previously installed version and insert it into the trail version to make it work for me?
    Myron

    Mea culpa
    While i registered all my cs2 thru 6 versions and my lightroom 2 thru 4 versions and recorded the serials and saved the adobe registration emails.  Since this came as a freebee with the camera i neglected this vital step.  I have the instslled version on my old laptop but want to install it on my new one.  Thanks to Jim Hess I got the serial so all is well in my world and I will register it with ADOBE
    Myron

  • Stablizing camera shake

    Hi, I'm a bit of a newbie to FCP...
    Is there a way to help stabilize camera shake in FCP 5?
    FP iMac   Mac OS X (10.3.9)  

    Welcome to the family,
    We get posts like this many times each day and you can choose to accept this response as advice or in some other way. Up to you.
    Open the index to the manual or open the online help system. Look for stabilizer online. The index isn't very well constructed so it isn't always easy to use, so look for image or effects in the index instead of stabilizer. The online system is copy of the manuals that Preview or Acrobat will parse instantly.
    bogiesan

  • Is it possible to embed camera profiles in DNGs?

    I convert my Canon 60D CR2s to DNG via the DNG converter, but also use Camera RAW in Photoshop CS5, which has lens profile support, and sometimes PTLens via a plugin in Aperture to avoid starting up Photoshop.
    Is it possible to embed camera profiles into a DNG, either with Adobe software, or other 3rd part software, so that Aperture can read it? Aperture uses the system Raw support, and since it does support embedded lens profiles, such as from some Micro 4/3rd cameras, which gives Aperture rudimentary support for them.
    So, is there any way to embed lens profiles into my converted DNGs with any available software? I'm OK with command line utilities, so if there is a techy way, I can devise a script (hopefully) to add it automatically. I do have PTLens, which has a lens profile database (though perhaps encrypted), and I think Hugin supports the LensFun database as well.

    I have only experimented a little bit with the profile creator, so don't take this as an expert answer.  It seems to me that the profiles are saved with an identifier linking them to the appropriate camera model.  Apparently what you would have to do is find a way to edit that profile and modify that identifier to point it to a different model.

  • How do I reduce camera shake in Premier Elements 10?

    How do I reduce camera shake in Premier Elements 10?  Thank-You

    You will find best advice over on the video forum. Most of us here are photographers.
    Click on the link below and copy and paste your question again. Good luck.
    Video questions: Click here for Premiere Elements Forum

Maybe you are looking for