Is it Possible to Create 13 DHCP pools in CISCO-WS-3750X-24S-S for 13 VLANS-1000 users?

Hi
Our Client has purchase the following products:
CISCO WS-3750X-24S-S Qnty: 1
CISCO WS-C2960X-48TS-L Qnty: 20
CISCO WS-C2960X-24TS-L Qnty: 6
CISCO AIR-CT2504-25-K9 Qnty: 1
CISCO AIR-CAP1602E-C-K9 Qnty: 23
Total LAN User: 812-820 and Wireless Users: 256-512.
Total No of VLANs = 13 (Including Wireless network and Management VLAN)
Client has no DHCP server and has decided to configure the Distribution Switch 3750 as DHCP server.
Can we configure 12 DHCP pools for LAN users and wireless users in the Cisco WS-3750X-24S-S switch?
Can It Handle the DHCP Load of the LAN users and Wireless users together?
The only thing I can do is to Move the Wireless DHCP in the Wireless LAN Controller.
Please suggest if configuring the 12 DHCP pool in the Distribution switch will be Appropriate for this network infrastructure.
If you have any other query please feel free to ask.

Can we configure 12 DHCP pools for LAN users and wireless users in the Cisco WS-3750X-24S-S switch?
I believe you can configure this much DHCP pools.
Can It Handle the DHCP Load of the LAN users and Wireless users together?
It can. DHCP is not CPU intensive. Plus you have lease time.
Besides, it's a small network. Should work. The main thing though is this: Why so many VLANs?
Downside is you don't have much features. You can't trace a MAC address from weeks ago. DHCP profiling is also not supported.

Similar Messages

Create DHCP Pool on Cisco Aironet 1131AG

Hi
How would I create a DCHP pool on a Cisco Aironet so that laptops would get an IP from that range when connected?
I dont want to use DHCP from our servers as these laptops are to be on a seperate network.
Just not sure what commands to use.
Thanks!

Hi there,
There is a nice step by step for setting up the DHCP Service on the AP in this doc;
Configuring the Access Point to Provide DHCP Service
http://www.cisco.com/en/US/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38adm.html#wp1090319
Hope this helps!
Rob
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com/docs/DOC-8727

Is it possible to config IPSLA DHCP broadcast to check DHCP relay + network performance for DHCP operation

We need to check our network performance for DHCP operation,to cover SLA through CPE(DHCP client)-send DHCPDISCOVER broadcast ,PE router relay agent-send DHCP operation packets to main and backup DHCP servers simultaneously(backup and main servers work standalone,they are communicate with each other and sends reply to DHCPDISCOVER message by DHCPOFFER),server vrrp,server (DHCP server).For this we need to create broadcast message from CPE end using cisco ipsla.Is there any possibility to check this.
Thaks & Regards

Can we configure 12 DHCP pools for LAN users and wireless users in the Cisco WS-3750X-24S-S switch?
I believe you can configure this much DHCP pools.
Can It Handle the DHCP Load of the LAN users and Wireless users together?
It can. DHCP is not CPU intensive. Plus you have lease time.
Besides, it's a small network. Should work. The main thing though is this: Why so many VLANs?
Downside is you don't have much features. You can't trace a MAC address from weeks ago. DHCP profiling is also not supported.

DHCP pools for LWAP's with multiple models

I have 2 different AP models (1130's & 1140's) for which I want to create a DHCP pool on a core layer 3 switch with an Option 43 pointing to the Wireless LAN Controller. In conjunction with the Option 43 entry however, I need to specify the AP type as an ASCII string in the Option 60 parameter. Problem is, how can this be done for multiple ASCII strings; ie. multiple AP models? The DHCP pool option 60 entry only allows for one string and you can only enter one option 60 command per DHCP pool. Surely it is common to have more than one AP model and that this can be done without having to resort to multiple DHCP pools (one for every model)?
Can anyone shed some light on this for me please? Would be much apprciated as I've come up blank on CCO documentation!

I usually just stage the AP first to join a WLC and to make sure it works prior to installing it. Pllace it on the same submnet as the management and let it join and then set the primary, secondary and or tertiary. Then you can move it to any vlan you want. If you want to use DHCP Option or DNS, then you should know that if for example it is an RCVK IOS previous to capwap it will only do LWAPP. Once it joins to the WLC in LWAPP it takes a new IOS the unit will do CAPWAP.
As an example 1140 have an RCVK IOS that only run CAPWAP, so it should only do CAPWAP:
CISCO-LWAPP-CONTROLLER and CISCO-CAPWAP-CONTROLLER
Create two A records both pointing to the same controller if you want to use DNS.
DHCP Option 43:
DHCP Option 43 is limited to one access point type per DHCP pool. You must configure a separate DHCP pool for each access point type.
http://www.cisco.com/en/US/docs/wireless/access_point/1140/quick/guide/ap1140getstart.html#wp37440

Is it possible to create a Column with Conditional Mandatory with another Column?

Is it possible to create a Column with Conditional Mandatory with another Column?
For example
In a Table we have column A, B, C.
A is Primary Column.
B is Optional
C is Conditional Mandatory.
A B
C
12345 ABC
OK
12346 NULL
NULL
12347 ABC
OK
Only if the B Column has the value then only C column should be mandatory

I guess you can't create a condtional mandatory column directly. However, you can use check constraint to on the column
create table YourTable
A int primary key,
B char(3),
C int,
constraint ch_con check(
B
is not null
or C is null

HOW DB POOLING WORK AND HOW TO CREATA A DB POOLING IN JSP

HI! I'm new in programming JSP and in web programming. I would like to learn how does the DB pooling work and how to create a DB Pooling. THANKS....

Thanks for the idea but i need a more detail one...
Hi,
Db connections are one of the most expensive
operations in an application.So at applicatin launch
only multiple connections to the dbase are opened and
used and returned/closed after usage.
You can have a loop running 10 times creating a
connection every time and putting those in a
Collection object (say hashtable) marked with a key.
Then in the application code , take an available
connection from the hashtable and use it . After use
return /close the connection (your pool can be
incremental..creating 5 connections evey 10-15
minutes).

Can not create or modify DHCP pool in UC560

I can't create new or modify existing DHCP pool inside our UC560 by using CCA 3.2.3 version: Configurate->Routing->DHCP server. I always get error "invalid DHCP pool range. The default gateway IP address 192.168.2.1 must be within the range of the address excluded from the DHCP pool."
I check my DHCP exclude tab: I already have start IP: 192.168.2.1 and End IP 192.168.2.10.
I would like to know solution to modify my current DHCP pool or I can add new DHCP pool by using CCA. If I have to use CLI, please let me know how to do it.
Thanks
Jacques

Something with my configuration that CCA can't modify it.. It have to go through CLI
Thanks,
Jacque

Possible to create a randomly generated test from a pool of questions

Is it possible to create a test which takes, say, 10 questions from a large pool of available questions?

This is something that is not supported.

Is it possible to create the adhoc network and get it work with WLAN APIs (WlanConnect) instead of netsh commands...?

Hi All,
I am facing issues in creating adhoc network in Windows 8.1. After searching in internet, I found that adhoc works with
netsh commands.
1. I have tried neths commands and able to get it work on windows 8.1,
but I want to do it through the WLAN APIs ie. WlanConnect ,
2. I am able to initiate the adhoc network(on Windows 8.1) by using WlanConnect API and other device are also able to connect to the Windows8.1 initiated adhoc network but the DHCP is not working.
-> clients are not able to get the IP address.
Is it possible to create the adhoc network and get it work with WLAN APIs (WlanConnect) instead of netsh commands...?
Thanks
akhil

Hi,
Did you mean to write a program to implement that creating adhoc via UI? This should be development issue.
But this is Windows 8.1 client forum and there is no professional on develop.
To help you better, I suggest you submit a new case on MSDN forum to help to check your code as they will be more professional on your issue:
This is the MSDN forum link.
http://social.msdn.microsoft.com/Forums/
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Kate Li
TechNet Community Support

DHCP pool to large. I want to shrink it.

Hi. So I have a DHCP Pool from say x.x.x.1 to x.x.x.200 buti want to reduce it to allow more static IP addresses at the top end so I want for example to change it to x.x.x.1 to x.x.x.170 to do this do I need to make a not of all the settings and delete the pool entirely and recreate the new pool, or is there which I would prefer to do, some way to shrink the pool, without blowing it away.
I'm paranoid and hate the idea of deleting it and creating a new pool, just in case. :)
Thanks

Along with Anders comments...
I'm not sure, but with NetWare one could adjust begin and end ranges for the DHCP pool... no? (Can't check). That option was gone with Linux (eDir integrated) DHCP services, but can still be done "under water".
If it's just the range and no real subnet changes... you can also edit the range using iManager or ConsoleOne (by looking at the values of the subnet pool in the "other" tab). Then reload the service. You should give the PC's some time (depending on lease time and how ofter PC's get rebooted) to get an assignment that's inside the new set range before handing out the addresses for static assignment.
As added note:
The export/import will work just as well, but a word of warning: with the Linux DHCP version you can lose certain info like class definitions and other little stuff. So it's always good to make note of the settings before doing that.
Cheers,
Willem

Error when try to create new server pool

I want to create new server pool to the server manager.
At the last step of confirmation,it failed.error message is as follows:
An error occurred while creating working directories for the server pool. Ensure that at least one utility server exists in the server pool and both the username and password for the utility server are correct.
I think all the server info is correct.But I don't know why.
Thanks,
Mary

In my case, the VM Server was set to use DHCP. Once I reconfigured the interface to use a static address, I was able to successfully create the Server Pool.
Documentation should be reflected to clarify this.

Maximum no of DHCP pools on a WLC

Hi, I want to create a separate ip pool pool based on the WLAN, what the maximum no of DHCP pools allowed on a WLC.

Internal DHCP is only for small networks and lab use.
We do not recommend to use it for any large deployment, please use an external DHCP server instead.
This is documented:
The internal DHCP server was introduced initially for branch offices where an external DHCP server is not available. It is designed to support a small wireless network with less than ten APs that are on the same subnet.
It is not a full-blown general purpose DHCP server. It only supports limited functionality and will not scale in a larger deployment.
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/110865-dhcp-wlc.html#Internal-DHCP
While you can configure multiple DHCP pools and it can work fine for some time, in my experience I have seen this internal DHCP server stop leasing IP address with 2 or 3 class C networks configured.
My recommendation, use an external DHCP server.

DNS not resolving to new machines on network after increasing DHCP pool size

Hello,
I am having a very strange issue with connecting new machines to reach the internet.
We have a ASA 5505 which the previous tech configured the DHCP pool to 192.168.1.60 - 192.168.1.110
We ended up reaching our limit which I changed it to: 192.168.1.60 - 192.168.187
Then next day when I arrived to work, our DC was hung from windows updates. Once we got everything back up, every computer currently on the network can reach the internet/VPN tunnels etc. So (continuing with my day) I created a new server in a VM (Hyper-V)
I can ping everything internally (even the router) 192.168.1.1, but I cannot resolve DNS. I have configured a static IP, tried Dynamic IP.
I have looked for any ACL indicating to block outside the range of the old DHCP pool but no luck.
On my local maching I can ping the DNS addresses, but just not on the new server.
Can anyone point me in the right direction to where to look for this issue?

I ended up figuring out what the issue was.
Since it was in a Hyper-V VM. the hosting server had to be updated to SP1.
Once completed, and rebooted. The VM in question got an IP address.

How to create a Thread Pool

Freinds,
I need to create a thread pool for one of my application.My knowledge of threads is limited to beginner level. I am just looking out for some pointers that will help me to create thread pool by reading and understanding any of the availble examples.Please send and if possible explain a bit. I really appreciate the fast response from the crowd. Thanks a lot for the help.

Hi,
A thread pool is used in situations where you have multiple requests to be serviced and limited resources. A typical example is a server with multiple clients. The server resources are limited and you cant typically create a thread for each client. You would then pick up one of the vacant threads and process the client and put the thread back in the pool. If you dont have any free threads, then you will make the client wait till you have one.
The typical questions you need to ask are, pool size, the kind of waiting scheme (queue, stack, prioritized queue, etc.). Additionally if you need a resizable thread pool you would need to define how the pool should shrink (abort operation and terminate or wait for operation to continue and terminate) and things like this.
If you need a typical implementation of a thread pool, you can go to JavaGuru.com where you have a standard implementation with all relevant details explained.
Prashanth

OVM 3.0.3: Create new Server Pool but keep storage repositories?

Hi,
I think I have somewhat messed up my Server pool a bit, such as that there are some kind of network bridges in the server pool which I cannot get rid of, since OVMM insists that these have vnics associated to them, when none of my VMs had any nic configured.
So, I guess my only option is to re-create the server pool entirely and migrating VMs between server pools doesn't seem to be possible. I was wondering, I if could at least keep the storage repositories and get away with only creating a new server pool and adding the VM servers to the new pool, but keeping the VM files in the repositories. This will likely make this transition much more smooth, than having to copy all the VMs from the repositories onto a temporary storage and back into the new storage repositories.
Cheers,
budy

budachst wrote:
I think I have somewhat messed up my Server pool a bit, such as that there are some kind of network bridges in the server pool which I cannot get rid of, since OVMM insists that these have vnics associated to them, when none of my VMs had any nic configured.Usually this means you've imported templates or old VMs that still have those bridges configured. Check the network configuration of the templates installed into your repositories and change the bridges to real/proper ones. Once you've done that, you'll be able to delete the unusued bridges.
So, I guess my only option is to re-create the server pool entirely and migrating VMs between server pools doesn't seem to be possible. I was wondering, I if could at least keep the storage repositories and get away with only creating a new server pool and adding the VM servers to the new pool, but keeping the VM files in the repositories. This will likely make this transition much more smooth, than having to copy all the VMs from the repositories onto a temporary storage and back into the new storage repositories.Depends on how you've created the storage repositories: if they're OCFS2-based, they are stamped with the cluster ID of the pool to which they currently belong. It's possible to change this, but you need to contact Oracle Support to do so. I'd recommend first trying to unmap the existing bridges as described above.

Is it Possible to Create 13 DHCP pools in CISCO-WS-3750X-24S-S for 13 VLANS-1000 users?

Similar Messages

Maybe you are looking for