Is it possible to create a cisco config file based on a polycom config file?

Hello,
We have 12 spa509g phones that are barely working with our provider (voxox).
My provider gave me the config files that are used to set up polycom phones as those are the only phones they support.
Features that currently work: incoming calls, outgoing calls, blind transfer, voicemail, call hold
Features that do not work: call presence - solid orange lights, attended transfer, paging
I've upgraded the firmware to 7.5.6 and configured the phone through the GUI as much as i can but I can't seem to enable the above features.
Any help would be highly appreciated as I'm about to buy polycom phones if we can't figure the configuration out.
Attached are the configuration files from voxox concerning polycom phones. confidential data says "removed"
If anyone thinks that this is possible, I can send a copy of my current cisco configuration file.
Thanks,
Philip

Well, I have no polycom phone, not I have personal experience with voxox. I wish the following document may help a lot - it describe Polycom configuration somewhat. As you have no Polycom, you have no current <mac>-directory.xml. So you don't know the device name you should subscribe to. But it seems to be a DID-number.
Just try it.
On the other side, ask Voxox for help. Don't ask for configuration files, ask for configuration instructions expressed in terms of the SIP protocols. Consider switch to more friendly and technically skilled VoIP operator if they will not understand what the SIP stand for ...
By the way, wrong forum. Your issue has nothing to do with XML Phone Application interface. I'm not sure someone will respond you here.

Similar Messages

Using AppleScript to create a text file, based on an OCR'd file's content

Hey guys, I've got an interesting situation.
I was wondering if there would be anyway to use something like AppleScript (or the like) to create a text document and fill it with information based on what is found in an already OCR'd file?
For example: I have a paycheck stub. The stub contains the words "Gross Pay" and the value "$xxxx.xx" on one line. Using Hazel to identify paychecks (based upon filenames), could I then use something like AppleScript, to create a new text file, and then pull the text from the line that contains the word's "Gross Pay" and insert it into the text file's next line?
Ex:
March 26,2012
Gross Pay                   $xxxx.xx
April 6,2012
Gross Pay                   $xxxx.xx
Kind of how TurboTax's iPhone app pulls text from an image, then uses the values to insert it into the app's appropriate fields?
I know this may be a lot to ask, but any help is appreciated. Thanks!

StevenD: FYI, I did NOT give you the one star rating. I would never do that!
StevenD wrote:
Ow. Someone is grumpy today.
Well, this is an assignment, so it is probably homework.
Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
This would make no sense unless all of it was just covered in class!
This is not a free homework service with instant gratification.
OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
"...but have no idea where to begin".
open notepad.
decide on a format, possibly one line per indicator.
type the document.
close notepad.
open LabVIEW.
Open the existing VI with all the indicators.
(are you still following?)
look at the diagram.
Who made the program?
Does the code make sense so far?
Is it a statemachine or just a bunch of crisscrossed wires?
Where do you want to add the file read?
How should the file be read (after pressing a read button, at the start of the program ,etc.)
See how far you get!
Message Edited by altenbach on 06-24-2008 11:23 AM
LabVIEW Champion . Do more with less code and in less time .

Create header file based on data in Data file

Hi,
For Data File: created an interface to extract data from table to data file.
1) Now i want to create a header file which contains info like :
Created On: #Rows Fetched:
2) I also want to create a footer, which contains info like:
SUM(AMOUNT) (amount is one of the columns of data file)
How do i implement this using an interface?
Thanks.

Step 1. Create a Variable Header - Call the count using some thing like this SELECT COUNT(*)||CHR(10) FROM TABLE
Step 2. Call it in OdiOutFile
Step 3 . Call the Interface to load from table to File using [ IKM SQL to File Append with create Header option - no ]
Step 4. Create another Variable Footer - Call the sum in the Refreshing Tab
Step 5. Call it in OdiOutfile with Append option Checked
Note - Make sure you use the same File Name for all the three places.
There are other ways too but this is simple way. Hope this helps.

Is it possible to create a custom role based on SELECT_CATALOG_ROLE?

I have a scenario where one user needs to see the DDL of another user:
HR schema:
CREATE OR REPLACE TYPE "HR"."CONTACT" IS OBJECT (
HOME VARCHAR2(40),
BUSINESS VARCHAR2(40)
SCOTT schema:
CREATE OR REPLACE TYPE "SCOTT"."EMPLOYEE_CONTACT" IS OBJECT (
EMP_NUMBER NUMERIC,
EMP_NAME VARCHAR2(50),
HOME HR.CONTACT,
WORK HR.CONTACT
When logged in as SCOTT, I can execute the following to get the DDL for EMPLOYEE_CONTACT:
SELECT DBMS_METADATA.GET_DDL('TYPE','EMPLOYEE_CONTACT') FROM DUAL;
but when I try to analyze it further, i.e. get the DDL for HR.CONTACT:
SELECT DBMS_METADATA.GET_DDL('TYPE','CONTACT', 'HR) FROM DUAL;
I get the following error:
13:11:59 [SELECT - 0 row(s), 0.000 secs] [Error Code: 31603, SQL State: 99999] ORA-31603: object "CONTACT" of type TYPE not found in schema "HR"
ORA-06512: at "SYS.DBMS_METADATA", line 4018
ORA-06512: at "SYS.DBMS_METADATA", line 5843
ORA-06512: at line 1
... 1 statement(s) executed, 0 row(s) affected, exec/fetch time: 0.000/0.000 sec [0 successful, 0 warnings, 1 errors]
If I grant the SELECT_CATALOG_ROLE to SCOTT, then I can get the DDL details for HR.CONTACT.
I am reluctant to recommend to my users SELECT_CATALOG_ROLE (or SELECT ANY DICTIONARY) as these permissions seem overly broad.
Is it possible to create a role that is based on SELECT_CATALOG_ROLE but limits SCOTT's ablity to get DDL to only artifacts from HR?

Hi Yes,
But this means you have to rebuild your list in content columns and a as a content Type.
best regards,
Paul Keijzers
Check my website http://www.kbworks.nl or follow me on
@KbWorks be sure to Check my
SharePoint-Specialist.nu for dutch informationworkers check
Wat Is microsoft SharePoint.nl for dutch readers who want to know what
microsoft office365 is.

Creating Multi-Column API radiogroup based on LOV

Hi everyone!
I was wondering whether or not it is possible to create a 3 column radiogroup based on the APEX_ITEM.RADIOGROUP API in APEX 3.0?
For instance, my radiogroup is based on a user's interest level and is supposed to look like: oTest oProduction oBoth
The values returned by whichever button is selected is based on a table value.
I'm having trouble making this multi column instead of 1 column with multiple rows. I need to set these up with an LOV similar to STATIC2:Test;TEST,Production;PROD,Both;BOTH
I also cannot create this radio group as a page item because they must display based on a query issued by a report region on this page.
Any ideas // suggestions?
Thanks,
Eric
Edited by: user11685190 on Oct 12, 2009 9:50 AM

Andy,
I'm actually going to have a radiogroup within the report column itself. The suggestion you gave is actually why I'm mixed up as to how to do this....I've always used Apex page items to create my radiogroups, and then you can simply add the LOV and change the number of columns and it's all set up for you.
This radio group is actually going to be within a row queried by the report. The report is essentially a 'checkbox selection screen' that also allows the user to select which interest level they hold for each selection (interest level is represented by this 3-option radio group). Therefore what you're going to see on the screen is ( [] represent checkboxes, o represent radio buttons):
Banner INB
[]Planned Outage Notification oTest oProduction oBoth
[]Unplanned Outage Notification oTest oProduction oBoth
Banner Self Service
[]Planned Outage Notification oTest oProduction oBoth
[]Unplanned Outage Notification oTest oProduction oBoth
My question was mainly geared towards whether or not you can add a static LOV to an API radiogroup (apex_item.radiogroup(1,interest_lvl,blah)), so that it could look like:
apex_item.radiogroup(1,1:2:3, NULL, 'Test':'Production':'Both') as result.
The only documentation I can find deals with issuing a single return value to these API radiogroups. I actually need a three column API radiogroup that hold's three different values based on which group member the user selects. If you can only issue one return value per group, I would have to define three under the same global variable except changing the return value and displayed text for each...such as:
apex_item.radiogroup(1,1,NULL,'Test') || apex_item.radiogroup(1,2,NULL,'Production') || apex_item.radiogroup(1,3,NULL,'Both) which will hopefully display as: oTest oProduction oBoth
I'm going to have to concatenate some &nbsps in between so my radio group buttons and labels are actually seperated, but this may be the right idea.
I'm going to toy around with this a little more today, I'll post my results.
Thanks for your quick responses!
Eric

NTLM Authentication : why is it not possible to create more than one NTLM realm ?

Hello,
I'm wondering why it is not possible to create more than one NTLM realm on a wsa.
Can you explain exactly what is the blocking point ?
Thanks in advance
Regards

Well, at this point (pre 7.5), there isn't an agent, the WSA is joined to the domain, just like a Windows box, it authenticates via that trust relationship. From that point it is all based on how NT/Active Directory domains work. As long as there is a trust between the domains, you can can auth users from as many domains as you like.
There is an agent in the works. The ADAgent will be released with 7.5. The code is already available, it was released with the ASA ver 8.4, and it will be used to pass authentication info to the WSA. At this point, current versions still require trust relationships between all of the domains touched.
Taken from the setup guide: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html#wp1054011
Before you configure even a single domain controller machine using the
adacfg dc create
command, ensure that the AD Agent machine is first joined to a domain (for example, domain
J
) that has a trust relationship with each and every domain (for example, domain
D[i]
) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine).
Depending on your Active Directory domain structure, the following scenarios are possible:
1. Single Forest, Single Domain—There is only one domain, D[i] for all domain controller machines, which is one and the same as domain J. The AD Agent machine must first be joined to this single domain, and since no other domains are involved, there is no need to configure any trust relationship with any other domain.
2. Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.
3. Multiple Forests, Multiple Domains—It is possible that domain J might belong to a forest that is different than the forest to which one or more of the domains D[i] corresponding to the domain controller machines belong. In this case, you must explicitly ensure that each of the domains D[i] has an effective trust relationship with domain J, in at least one of the following two ways:
a. A two-way external trust relationship can be established between the two domains, D[i] and J
b. A two-way forest trust relationship can be established between the the forest corresponding to domain D[i] and the forest corresponding to domain J

Possible to create a custom renderer for rendering standard component ?

This is in context for creating dynamic Data tables. Is it possible to create a custom Renderer for rendering component (standard) without creating a custom component?
namanc

Let's assume you want to create a custom renderer which will be used to render the error-messages (the h:messages tag). The component-family in this case is: javax.faces.Messages, the renderer-type javax.faces.Messages.
Therefor in your application's faces-config.xml add this renderer-statement (inside a render-kit, obviuosly):
<faces-config>

<render-kit>
    <renderer>
      <component-family>javax.faces.Messages</component-family>
      <renderer-type>javax.faces.Messages</renderer-type>
      <renderer-class>my.very.special.MessagesRenderer</renderer-class>
    </renderer>
</render-kit>

</faces-config>The code for MessagesRenderer is very dependent on your needs, therefor I will not post something here. Basically you need to extend javax.faces.render.Renderer. For help in that camp, surf to the online tutorials or get yourself a book (I learned a lot from Kito Mann's "JSF in Action"). Additionally grab the source for Sun's RI AND Myfaces and dig into that java-code. There is a huge learning potential looking at that source-material.
hth
Alexander

Is it possible to create a VTI tunnel from my 877 router to my ASA

Hi all
I woulke like to know is it possible to create a VTI tunnel from my 877 router to my ASA, rather than creating a cryptomap on the router ?
cheers
Carl

Yes you can
Forgot to add that it possible when configuring ezvpn where the 877 is a remote client and Asa server
Sent from Cisco Technical Support iPhone App

It is possible to create something like this in AE?

Hi, i want to know if its possible to create something like this in AE (not in 3D) but particles that 'builds up' the text in some way? i have a text that is a vector, and the same as PNG, it is possible? Please tell me!

It's amazing what Google can find:
Red Giant - RGTV - Sand to Text Transitions
Something similar from a zillion years ago:
Flowing Title Effects using Adobe After Effects : Adobe After Effects Tutorial

Is it possible to create a link on the content of a text annotation??

Is it possible to create a link on the content of a annotation??? Like the content of an annotation is some notes as well as a link...
content -
this is my first annotation(notes)
http://www.google.co.in/(link)
is it possible to create a link for the url given in the content of an annotation??? On click on the url...it should get opened...
please reply its really urgent....

How/where do you want to accomplish it?
Within the document? Using Acrobat? Using another application?
Using Acrobat within the document would be possible using Acrobat JavaScript. You can access the annotation objects of your document, and you then can evaluate the properties of each of these objects. Have a closer look at the Annotation Object section in the Acrobat JavaScript documentation.
You will look for the contents property, and evaluate its content. When you have found something looking like a URL, you can create a link (using the rect property of the annotation), and you have what you want; you might then think to destroy the annotation, as it may overlay the link.
Hope this can help.
Max Wyss.

Is it possible to create an extension containing a panel for Dreamweaver CC 2014?

Dear Adobe Community,
Currently we work in Dreamweaver CS6 with some custom extensions. Since we're now looking into upgrading to CC 2014, obviously, we need to make sure we can either re-use, port or create new extensions to maintain the functionality we have now.
In short: I haven't been able to create an extension for CC 2014 featuring a panel in any shape or form.
Creating a HTML5 based (CES 5) extension results in an error only visible in the log (attached).
Fiddling around in a flash based extension, upping the host application version gives no such error. But, like a HTML 5 based one, doesn't show up in Dreamweaver. (And I'm using the Sublime plugin, since Extension Builder 3 lacks DW support.)
Mind you, the "extensions" tab in the "Window" menu is lacking entirely.
Can anyone tell me if it is at all possible to create an extension for DW CC 2014?
Full log:
2014-09-01 16:11:24 : INFO PlugPlug version : 5.0.0.74
2014-09-01 16:11:24 : INFO LogLevel : 6
2014-09-01 16:11:24 : INFO Copy RGB Background Color Information for AppBar
2014-09-01 16:11:24 : INFO Fallback: Copy RGB Background Color Information for AppBar for sRGB usage
2014-09-01 16:11:24 : INFO Copy RGB Background Color Information for Panel
2014-09-01 16:11:24 : INFO Fallback: Copy RGB Background Color Information for Panel for sRGB usage
2014-09-01 16:11:24 : INFO Windows 32-bit PlugPlug logs
2014-09-01 16:11:24 : INFO ----------------------------
2014-09-01 16:11:24 : INFO PlugPlugSetup() API called:
2014-09-01 16:11:24 : INFO hostData->appName : DRWV
2014-09-01 16:11:24 : INFO hostData->appVersion : 14.0
2014-09-01 16:11:24 : INFO hostData->locale : en_US
2014-09-01 16:11:24 : INFO hostData->userInterfaceLocale : en_US
2014-09-01 16:11:24 : INFO hostData->supportedTypes : 31
2014-09-01 16:11:24 : INFO hostData->apeVersion : unknown
2014-09-01 16:11:24 : INFO hostData->overrideManifestLocation : (null)
2014-09-01 16:11:24 : INFO isApplicationOffline : false
2014-09-01 16:11:24 : INFO hostData->hostCEPHtmlEngineDirectory : (null)
2014-09-01 16:11:24 : INFO hostData->hostExtensionDirectory :C:\Users\BC-OLO\AppData\Roaming\Adobe\Dreamweaver CC 2014\en_US\Configuration\CEP\Extensions\
2014-09-01 16:11:24 : INFO hostData->hostStageManagerDirectory : C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC 2014\Configuration\CEP\StageManager\
2014-09-01 16:11:24 : INFO hostData->imsLibPath: C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\P7\IMSLib.dll
2014-09-01 16:11:24 : INFO skinInfo->baseFontSize : 10
2014-09-01 16:11:24 : INFO skinInfo->baseFontFamily : MS Shell Dlg 2
2014-09-01 16:11:24 : INFO skinInfo->appBarBackgroundColor->antialiasLevel : PlugPlugAntialiasLevel_None
2014-09-01 16:11:24 : INFO skinInfo->appBarBackgroundColor->type : PlugPlugColorType_RGB
2014-09-01 16:11:24 : INFO ExtensionRegistry started
2014-09-01 16:11:24 : INFO Found ExtensionManifest in cache: C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.example.ext\csxs\manifest.xml
2014-09-01 16:11:24 : INFO Found ExtensionManifest in cache: C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.OLO.Nemo\csxs\manifest.xml
2014-09-01 16:11:24 : INFO Searching for valid extensions in 'C:\Users\BC-OLO\AppData\Roaming\Adobe\Dreamweaver CC 2014\en_US\Configuration\CEP\Extensions\'
2014-09-01 16:11:24 : INFO Searching for valid extensions in 'C:\Program Files (x86)\Common Files\Adobe\CEP\extensions'
2014-09-01 16:11:24 : DEBUG Searching for valid extensions in 'C:\Program Files (x86)\Common Files\Adobe\CEP\extensions'
2014-09-01 16:11:24 : INFO Searching for valid extensions in 'C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions'
2014-09-01 16:11:24 : DEBUG Searching for valid extensions in 'C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions'
2014-09-01 16:11:24 : DEBUG ExtensionManifest in cache is still the same (C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.example.ext\csxs\manifest.xml).
2014-09-01 16:11:24 : DEBUG ExtensionManifest in cache is still the same (C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.OLO.Nemo\csxs\manifest.xml).
2014-09-01 16:11:24 : INFO ExtensionManifest 'C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.example.ext\csxs\manifest.xml' contains '1' valid extensions for this host
2014-09-01 16:11:24 : INFO Found extension with id 'com.example.ext'
2014-09-01 16:11:24 : DEBUG -> BasePath                    : C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.example.ext
2014-09-01 16:11:24 : DEBUG -> ExtensionBundleId           : com.example.ext
2014-09-01 16:11:24 : DEBUG -> ExtensionBundleVersion      : 1.0.0
2014-09-01 16:11:24 : DEBUG -> ID                          : com.example.ext
2014-09-01 16:11:24 : DEBUG -> Version                     : 1.0.0
2014-09-01 16:11:24 : DEBUG -> MainPath                    : C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.example.ext\index.html
2014-09-01 16:11:24 : DEBUG -> ScriptPath                  : C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.example.ext\jsx\hostscript.jsx
2014-09-01 16:11:24 : DEBUG -> ScriptEngineId              : com.example.ext_Engine_Id
2014-09-01 16:11:24 : DEBUG -> AutoVisible                 : true
2014-09-01 16:11:24 : DEBUG -> StartOn -> Event            : 0
2014-09-01 16:11:24 : DEBUG -> Type                        : Panel
2014-09-01 16:11:24 : DEBUG -> Menu                        : Extension-Name
2014-09-01 16:11:24 : DEBUG -> MenuPlacement               : (null)
2014-09-01 16:11:24 : DEBUG -> Size
2014-09-01 16:11:24 : DEBUG    -> Height                   : 300
2014-09-01 16:11:24 : DEBUG    -> Width                    : 300
2014-09-01 16:11:24 : DEBUG -> MaxSize
2014-09-01 16:11:24 : DEBUG -> MinSize
2014-09-01 16:11:24 : DEBUG -> IconPath
2014-09-01 16:11:24 : DEBUG    -> IconPath -> Normal       : C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.example.ext\icons\iconNormal.png
2014-09-01 16:11:24 : DEBUG    -> IconPath -> Disbaled     : C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.example.ext\icons\iconDisabled.png
2014-09-01 16:11:24 : DEBUG    -> IconPath -> RollOver     : C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.example.ext\icons\iconRollover.png
2014-09-01 16:11:24 : DEBUG    -> IconPath -> DarkNormal   : C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.example.ext\icons\iconDarkNormal.png
2014-09-01 16:11:24 : DEBUG    -> IconPath -> DarkRollOver : C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.example.ext\icons\iconDarkRollover.png
2014-09-01 16:11:24 : DEBUG -> DefaultExtensionData        : (null)
2014-09-01 16:11:24 : DEBUG -> SpecialExtensionData        : (null)
2014-09-01 16:11:24 : DEBUG -> RequiredRuntimeList            : 1
2014-09-01 16:11:24 : DEBUG    -> RequiredRuntime -> Name     : CSXS
2014-09-01 16:11:24 : DEBUG    -> RequiredRuntime -> Version : 5.0.0
2014-09-01 16:11:24 : INFO ExtensionManifest 'C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.OLO.Nemo\csxs\manifest.xml' contains '1' valid extensions for this host
2014-09-01 16:11:24 : INFO Found extension with id 'com.OLO.Nemo.extension'
2014-09-01 16:11:24 : DEBUG -> BasePath                    : C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.OLO.Nemo
2014-09-01 16:11:24 : DEBUG -> ExtensionBundleId           : com.OLO.Nemo
2014-09-01 16:11:24 : DEBUG -> ExtensionBundleVersion      : 0.5.0
2014-09-01 16:11:24 : DEBUG -> ID                          : com.OLO.Nemo.extension
2014-09-01 16:11:24 : DEBUG -> Version                     : 0.5.0
2014-09-01 16:11:24 : DEBUG -> MainPath                    : C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.OLO.Nemo\Nemo.swf
2014-09-01 16:11:24 : DEBUG -> ScriptPath                  : C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.OLO.Nemo\Nemo.jsx
2014-09-01 16:11:24 : DEBUG -> ScriptEngineId              : com.OLO.Nemo.extension_Engine_Id
2014-09-01 16:11:24 : DEBUG -> AutoVisible                 : true
2014-09-01 16:11:24 : DEBUG -> StartOn -> Event            : 0
2014-09-01 16:11:24 : DEBUG -> Type                        : Panel
2014-09-01 16:11:24 : DEBUG -> Menu                        : Nemo
2014-09-01 16:11:24 : DEBUG -> MenuPlacement               : (null)
2014-09-01 16:11:24 : DEBUG -> Size
2014-09-01 16:11:24 : DEBUG    -> Height                   : 400
2014-09-01 16:11:24 : DEBUG    -> Width                    : 232
2014-09-01 16:11:24 : DEBUG -> MaxSize
2014-09-01 16:11:24 : DEBUG -> MinSize
2014-09-01 16:11:24 : DEBUG -> IconPath
2014-09-01 16:11:24 : DEBUG    -> IconPath -> Normal       : (null)
2014-09-01 16:11:24 : DEBUG    -> IconPath -> Disbaled     : (null)
2014-09-01 16:11:24 : DEBUG    -> IconPath -> RollOver     : (null)
2014-09-01 16:11:24 : DEBUG    -> IconPath -> DarkNormal   : (null)
2014-09-01 16:11:24 : DEBUG    -> IconPath -> DarkRollOver : (null)
2014-09-01 16:11:24 : DEBUG -> DefaultExtensionData        : (null)
2014-09-01 16:11:24 : DEBUG -> SpecialExtensionData        : (null)
2014-09-01 16:11:24 : DEBUG -> RequiredRuntimeList            : 1
2014-09-01 16:11:24 : DEBUG    -> RequiredRuntime -> Name     : CSXS
2014-09-01 16:11:24 : DEBUG    -> RequiredRuntime -> Version : 5.0.0
2014-09-01 16:11:24 : INFO
********** Number of extensions found : 2 **********
2014-09-01 16:11:24 : INFO Register Extension called for Extension : com.OLO.Nemo.extension, ExtensionType : Trusted
2014-09-01 16:11:24 : INFO ----------------------------------------------------------------
2014-09-01 16:11:24 : DEBUG Extension inPlayerType : 1
2014-09-01 16:11:24 : DEBUG Extension mainUTF8Path : C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.OLO.Nemo\Nemo.swf
2014-09-01 16:11:24 : DEBUG Extension iconPathNormal :
2014-09-01 16:11:24 : DEBUG Extension iconPathRollOver:
2014-09-01 16:11:24 : DEBUG Extension iconPathDisable:
2014-09-01 16:11:24 : DEBUG Extension windowType: Panel
2014-09-01 16:11:24 : DEBUG Extension showWindowOnCreate: true
2014-09-01 16:11:24 : DEBUG Extension defaultGeometry topleftx: 0
2014-09-01 16:11:24 : DEBUG Extension defaultGeometry toplefty: 0
2014-09-01 16:11:24 : DEBUG Extension defaultGeometry width: 232
2014-09-01 16:11:24 : DEBUG Extension defaultGeometry height: 400
2014-09-01 16:11:24 : INFO PlugPlugRegisterExtension() callback returned: PlugPlugErrorCode_success //<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<    FLASH BASED plugin
2014-09-01 16:11:24 : INFO Register Extension called for Extension : com.example.ext, ExtensionType : Trusted
2014-09-01 16:11:24 : INFO ----------------------------------------------------------------
2014-09-01 16:11:24 : DEBUG Extension inPlayerType : 2
2014-09-01 16:11:24 : DEBUG Extension mainUTF8Path : C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.example.ext\index.html
2014-09-01 16:11:24 : DEBUG Extension iconPathNormal : C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.example.ext\icons\iconNormal.png
2014-09-01 16:11:24 : DEBUG Extension iconPathRollOver: C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.example.ext\icons\iconRollover.png
2014-09-01 16:11:24 : DEBUG Extension iconPathDisable: C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\extensions\com.example.ext\icons\iconDisabled.png
2014-09-01 16:11:24 : DEBUG Extension windowType: Panel
2014-09-01 16:11:24 : DEBUG Extension showWindowOnCreate: true
2014-09-01 16:11:24 : DEBUG Extension defaultGeometry topleftx: 0
2014-09-01 16:11:24 : DEBUG Extension defaultGeometry toplefty: 0
2014-09-01 16:11:24 : DEBUG Extension defaultGeometry width: 300
2014-09-01 16:11:24 : DEBUG Extension defaultGeometry height: 300
2014-09-01 16:11:24 : INFO PlugPlugRegisterExtension() callback returned: PlugPlugErrorCode_registerExtCallbackNotFound
2014-09-01 16:11:24 : WARN Service: com.example.ext not registered properly. //<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<   HTML5 BASED plugin
2014-09-01 16:11:24 : INFO PlugPlugSetMenu() callback called for main menu. Extension : , inMenuPosition:
(null), Menu: [{menuId: '1',nameUtf8: 'Nemo',extensionId: 'com.OLO.Nemo.extension'}]
2014-09-01 16:11:24 : INFO PlugPlugSetMenu() callback returned: PlugPlugErrorCode_success
2014-09-01 16:11:24 : INFO ExtensionLoadService activated
2014-09-01 16:11:24 : DEBUG PlugPlugAMTRequest() callback called. Request: <?xml version="1.0" encoding="UTF-8"?><PlugPlugEnvelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="./AmtlibPlugPlug.xsd"><request id="1" functionName="getProductLicenseInfo"><arguments/></request></PlugPlugEnvelope>
2014-09-01 16:11:24 : DEBUG PlugPlugAMTRequest() return value: PlugPlugErrorCode_success
2014-09-01 16:11:24 : DEBUG PlugPlugAMTRequest() XML returned chunk: <?xml version="1.0" encoding="utf-8" ?>
<PlugPlugEnvelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="./AmtlibPlugPlug.xsd">
    <response id="1" functionName="getProductLicenseInfo">
        <AdobeIDCreated>1</AdobeIDCreated>
        <LicenseType>Retail</LicenseType>
        <LicenseExpires>0</LicenseExpires>
        <LicenseRefreshes>0</LicenseRefreshes>
        <LicenseEncryptedSerial>909709176804077038364305</LicenseEncryptedSerial>
        <LicensedProductName>EPIC_APP_598</LicensedProductName>
        <SecondsSinceActivation>0</SecondsSinceActivation>
        <SecondsSinceSerialization>8147122</SecondsSinceSerialization>
        <SecondsBeforeExpiration>0</SecondsBeforeExpiration>
        <SecondsBeforeRefresh>0</SecondsBeforeRefresh>
        <AMTLibResponse>6</AMTLibResponse>
        <LicenseStatus>3</LicenseStatus>
        <SerializationGraceInseconds>3888000</SerializationGraceInseconds>
        <ProductCycle>8</ProductCycle>
        <PendingClaims>
            <PendingClaim>
                <AdobeID>87ADE9246F6370DB6008205B2EAE5B95</AdobeID>
                <TimeStamp>1401433567</TimeStamp>
            </PendingClaim>
        </PendingClaims>
        <IsSuite>SUITE</IsSuite>
        <APIVersion>2.0</APIVersion>
        <PersonGUIDWithAuthSource>10B3010147A877E8992015B9@AdobeID</PersonGUIDWithAuthSource>
    </response>
</PlugPlugEnvelope>
2014-09-01 16:11:31 : INFO PlugPlugUnloadExtension called for extension : com.OLO.Nemo.extension
2014-09-01 16:11:31 : DEBUG AllocatePlayer() callback called. playerOptions: 0B4CFB01
2014-09-01 16:11:31 : DEBUG AllocatePlayer() callback returned: PlugPlugErrorCode_success
2014-09-01 16:11:31 : DEBUG Connected PlugPlug DOM to APE player
2014-09-01 16:11:31 : DEBUG Looking for available StageManagers
2014-09-01 16:11:31 : DEBUG Looking for available StageManagerBundles in StageManagerManifest at C:\Program Files (x86)\Common Files\Adobe\CEP\StageManager\StageManagerManifest.xml
2014-09-01 16:11:31 : DEBUG No StageManagerManifest found at C:\Program Files (x86)\Common Files\Adobe\CEP\StageManager\StageManagerManifest.xml
2014-09-01 16:11:31 : DEBUG Looking for available StageManagerBundles in StageManagerManifest at C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\StageManager\StageManagerManifest.xml
2014-09-01 16:11:31 : DEBUG No StageManagerManifest found at C:\Users\BC-OLO\AppData\Roaming\Adobe\CEP\StageManager\StageManagerManifest.xml
2014-09-01 16:11:31 : DEBUG Looking for available StageManagerBundles in StageManagerManifest at C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC 2014\Configuration\CEP\StageManager\StageManagerManifest.xml
2014-09-01 16:11:31 : DEBUG Found 1 possible StageManagers in StageManagerManifest
2014-09-01 16:11:31 : DEBUG Added StageManagerBundle StageManagerBundle with Version (5.0.0.20140224_v5_0_0_62), ReleasePath (C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC 2014\Configuration\CEP\StageManager\Release\StageManager-5.0.swf), DebugPath (C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC 2014\Configuration\CEP\StageManager\Debug\StageManager-5.0.swf)
2014-09-01 16:11:31 : DEBUG Determining the most recent StageManagerBundle
2014-09-01 16:11:31 : DEBUG Now checking StageManagerBundle with Version (5.0.0.20140224_v5_0_0_62), ReleasePath (C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC 2014\Configuration\CEP\StageManager\Release\StageManager-5.0.swf), DebugPath (C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC 2014\Configuration\CEP\StageManager\Debug\StageManager-5.0.swf) against (null)
2014-09-01 16:11:31 : DEBUG Will use StageManagerBundle with Version (5.0.0.20140224_v5_0_0_62), ReleasePath (C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC 2014\Configuration\CEP\StageManager\Release\StageManager-5.0.swf), DebugPath (C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC 2014\Configuration\CEP\StageManager\Debug\StageManager-5.0.swf) as the most current StageManagerBundle
2014-09-01 16:11:31 : DEBUG StageManager SWF will be loaded from 'C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC 2014\Configuration\CEP\StageManager\Debug'
2014-09-01 16:11:32 : DEBUG Add StageManager event listener
2014-09-01 16:11:32 : INFO StageManagerController: Created StageManager <STAGE_MANAGER_0> for Extension <com.OLO.Nemo.extension>
2014-09-01 16:11:32 : INFO Return value of PlugPlugUnloadExtension call : PlugPlugErrorCode_unknown
2014-09-01 16:11:32 : INFO PlugPlugTerminate called
2014-09-01 16:11:32 : INFO StageManager: Disposing StageManager <STAGE_MANAGER_0>
2014-09-01 16:11:32 : DEBUG Remove StageManager event listener
2014-09-01 16:11:32 : DEBUG Disconnected PlugPlug DOM from APE player
2014-09-01 16:11:32 : DEBUG DisposePlayer() callback called. apePlayerRef: 06C4CE78
2014-09-01 16:11:32 : DEBUG DisposePlayer() callback returned: PlugPlugErrorCode_success
2014-09-01 16:11:32 : INFO Return value for PlugPlugTerminate: PlugPlugErrorCode_success

Assuming we have a CSXS Flash based extension which works with DW CC 2014, steps to be followed for the extension to show up in DW CC 2014:
1. The extension should be placed at /Users/labuser/Library/Application Support/Adobe/Dreamweaver CC 2014/en_US/Configuration/CEP/Extensions . [WIN: C:\Users\labuser\AppData\Roaming\Adobe\Dreamweaver CC 2014.1\en_US\Configuration\CEP\Extensions] . The installation of the zxp should have placed the extension in the above path.
2.   Add a custom menu item like <menuitem mmstring:name="menus/DWMenu_Window_BusinessCatalyst" key="Cmd+Shift+B" enabled="true" command="dw.toggleCSXSExtension("com.adobe.bccsdialog");" checked="dw.getFloaterVisibility('BCModulePanel');" id="DWMenu_Window_BC_Modules" /> where the argument in the call dw.toggleCSXSExtension is the Extension Id as seen in the manifest.xml at the line <Extension Id="com.adobe.bccsdialog">.
Note: All these will work provided the extension is successfully registered with DW.
To know if an extension is registered with DW, do the following:
1. On MAC, there is a CSXS preference plist file Users/labuser/Library/Preferences/com.adobe.CSXS.5.plist which has an entry named LogLevel. Set the value to 5 for detailed log. [On windows –Registry - Computer\HKEY_CURRENT_USER\Software\Adobe\CSXS.5]
2. Quit and Launch DW
3. Open Console application and under ~/Library/Logs/CSXS/, there will be a log file created with name csxs5-DRWV.log [WIN: log file is in C:\Users\labuser\AppData\Local\Temp]
4. In the log, search for "Register Extension called for Extension : com.adobe.bccsdialog, ExtensionType : Trusted" and under that, you should see "PlugPlugRegisterExtension() callback returned: PlugPlugErrorCode_success" which mean this extension is successfully registered with DW.
5. When you try loading the extension from the menu you have added, you should see an entry like "INFO PlugPlugLoadExtension called for extension : com.adobe.bccsdialog" followed in the next few lines by " INFO Return value of PlugPlugLoadExtension call : PlugPlugErrorCode_success" and you should see the extension loaded in DW.
If any of these steps fail with any value other than "PlugPlugErrorCode_success", the extension will not load in DW.
The solution provided here is a temporary one and we are bringing back the functionality we have removed in DW CC 2014 in the next release.

HT204053 the only way to creat an icloud account is with a ipad, iphone or imac. is it possible to creat the account from my windos PC? i already downladed i cloud, and i have an Apple ID but Not an Icloud account/

the only way to creat an icloud account is with a ipad, iphone or imac. is it possible to creat the account from my windos PC? i already downladed i cloud, and i have an Apple ID but Not an Icloud account/

Isa Garduño wrote:
the only way to creat an icloud account is with a ipad, iphone or imac Apple computer.
As you already knew, no, you cannot create a new iCloud account from anything but the above devices.
http://support.apple.com/kb/HT4436

Is it possible to create two apple ID on one iTunes account?

I bought my wife an iPod Touch, how can I keep my contacts seperate from hers?

Phil, I am confused about your statement/answer:
""Is it possible to create two Apple IDs on one iTunes account?"
Yes. I have two."
Apple says:
"An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services. You don't have to create a new account for each service—just use your Apple ID."
Thus an Apple ID is the same as the iTunes account.
Did you mean can yu use more than one Apple ID on one iPod because yuo know the answr is yes.
Or have I go something wrong?

Is it currently possible to create a doughnut chart with multiple concentric circles in SSRS?

Is there currently any way to create a 'doughnut' chart with multiple concentric circles in an SSRS report (any version), without using 3rd party tools?
Something like this, perhaps?
(For that matter is it possible to create this using JavaScript? It's my understanding that this image was originally created in a web app using JavaScript. So far I've not been able to pin down the details. I've found hints that JavaScript
can be used in SSRS reports but so far no clear working examples.)

Hi B.Chernick,
According to your description, you want to create a create a doughnut chart with multiple concentric circles in your report. Right?
In Reporting Services, we only have doughnut chart with one concentric circle. All the category group is in that concentric circle. Though we can embed javascript injection in expression, it only give the css style to values or report
items which can change the looking. It can't change the structure of the report items itself. So your requirement can't be achieved current.
For your requirement, we suggest you provide Microsoft a feature request at
https://connect.microsoft.com/SQLServer
so that we may try to expand the product features based on your needs.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Is it possible to create many primary key for a table?

hello sir/mam.
i am selva, i am new to abap,
is it possible to create many primary key for a table?
please guide me.

Hi Selva,
Many Primary Keys = Composite Key.
i.e some set of columns will enable you to identify a unique row from a set of rows in the table.
This can be achieved by checking the primary key check box in se11.
Hope it helps.
Regards,
Maheswaran.B
Message was edited by: Maheswaran B

Is it possible to create a cisco config file based on a polycom config file?

Similar Messages

Maybe you are looking for